ItalianoShop
Showing 1171–1200 of 1497 results
-
Module
HP-Agilent/Keysight 34905A
The HP 34905A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation.
The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 GHz bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies– create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 50 Ohm
– Cascade together for up to 16:1 multiplexerSKU: 1143 -
Power Sensor
HP-Agilent/Keysight 8484A
The HP/Agilent 8484A is a diode power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 435A/B, 436A, 437A/B, and 438A power meters. It is a high sensitivity sensor operating from 10 MHz to 18 GHz at power levels from -70 to -20 dBm. The 8484A High Sensitivity Power Sensor measures power from 0.1nW to 10 uW over a frequency range of 10MHz to 18GHz.
SKU: 1287 -
DC Electronic Load
Höcherl & Hackl PLI 2112 / H&H PLI2112
Höcherl & Hackl PLI 2112 Electronic Load
The PLI series of electronic loads provide a comfortable operation by a graphical user interface. The PLI series highlight is the extensive variety of standard interfaces. Apart from Ethernet, USB, RS-232 and Analog interface there is a standard CAN interface. Programming is done in SCPI syntax.
The units provide constant current mode, constant voltage mode, constant power mode and constant resistance mode. In addition, protections for current and voltage can be set in any mode. A static data acquisition function allows to store measurement data on an external USB flash drive. Dynamic operation can be configured by up to 300 list point settings. The Electronic Load saves the synchronously acquired measurement data with timestamp. A configurable trigger model controls data acquisition, static and dynamic settings.
Special applications, such as fuel cell tests, need to load the DUT down to almost 0 V. For these purposes we supply a range of models with an integrated zero-volt supply.– Voltage: 120 V
– Current: 60 A
– Power: 2100 W
DatasheetSKU: n/a -
Oscilloscope 2 channels
TEKTRONIX 2230
The Tektronix 2230 is a portable 100 MHz, dual-channel combination analog / digital storage scope, sister model of 2220 and 2221.
It has both an analog mode and a digital mode. In the digital storage mode, up to three waveform sets (CH 1 and/or CH 2) may be stored in a save ref. memory and recalled for display at a later time.
The 2230 features alphanumeric CRT readout of many of the front panel controls. It has a DB-9 auxiliary connector on the right side providing an external clock input as well as an output for an analog X-Y plotter to make permanent copies of the display. This feature can be accessed through the “Mem select” menu.
Some Firmware versions have a diagnostics menu with the Tektronix logo and wizard image.Vertical —
Input impedance 1 MΩ // 20 pF
Maximum Safe Input Voltage 400 V (dc + peak AC) or 800 Vp-p AC
CMRR At least 10:1 at 10 MHz
— Horizontal —
Timebase A 50 ns/Div to 0.5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div. In “Store” mode lower sweep speeds up to 5 s/Div are available
Timebase B 50 ns/Div to 5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div
Bandwidth 100 MHz (analog)
Sampling rate 20 MS/s
Record length 1K or 4K samples (single channel), optional 26K
Z axis input (intensity); DC to 20 MHz, maximum safe input 30V (dc + peak ac) Input resistance about 10kΩ
CRT display area : 8 × 10 cm²
Dimensions With feet and handle: 137 x 361 x 511 mm³
Features · X-Y operation
· Pre/Post-triggering
· Averaging
· Dual time base
· Cursors and readout
DatasheetSKU: n/a -
NOISE SOURCE
HP-Agilent/Keysight R347B
La sorgente di rumore Keysight R347B copre una gamma di frequenza da 26,5 a 40 GHz. Questa sorgente di rumore a guida d'onda consente di effettuare misurazioni accurate e convenienti della figura di rumore su dispositivi a onde millimetriche. L'R347B fornisce un rumore a banda larga ad alta precisione all'ingresso del sistema o del componente in prova. Il misuratore della figura di rumore elabora quindi il rapporto ON/OFF della potenza di rumore presente nel sistema IF e fornisce una lettura accurata della figura di rumore e del guadagno. La sorgente di rumore R347B ha una notevole stabilità ENR nel tempo, che consente cicli di ricalibrazione più lunghi e misurazioni della figura di rumore più accurate. Prestazioni e affidabilità a frequenze millimetriche Eccellente stabilità ENR nel tempo Basso ROS
SKU: n/a -
Digital Multimeter
HP-Agilent/Keysight 34401A
The Agilent 34401A multimeter is a tool kit of useful testing functions. In addition to the standard functions you´ve come to expect from a high quality digital multimeter, you also get many other capabilities, from min/max/avg to built-in limit testing. 6½ digit precision measurements for an affordable price means you can make measurements with confidence without breaking your budget. Features: 6½ digit resolution. 0.0035% 1 year dcV accuracy, 0.06% 1 year acV accuracy. Twelve measurement functions, plus limit testing and min/max/average. True RMS AC volts and current. 1000 readings/second in ASCII format across the GPIB bus. RS-232 and GPIB Standard, USB optional.
DatasheetSKU: 57 -
Digital Multimeter
Flir T910973
– Quickly indicates the moisture content of materials with Pinless technology without damaging the surface
– Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length) – Manually store/recall up to 20 labeled readings
– Works on multiple wood types and other building materials
– Easy to read, large dual display with automatic backlight feature
– Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity
– Pinless measurement depth to 0.75″ (19mm) below the surface
– Programmable high/low Moisture and Humidity alarms – Designed with a patented IR circuit to measure non-contact surface temperature
– 8:1 distance to spot ratio with 0.95 fixed emissivity
– Built-in Humidity/Temperature probe measures Relative Humidity, Air
– Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP),
– Vapor Pressure, and condensation point
– Fast Analog Bargraph, Min/Max and Data Hold, Auto power off and low battery indication
– MeterLink Bluetooth transmitter wirelessly transmits moisture and humidity data to selected FLIR thermal imaging IR cameras to incorporate meter readings with thermal images
– Complete with pin moisture probe with cable, 9V battery and caseSKU: 279 -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers
SKU: 388
-
Module
HP-Agilent/Keysight 34905A
The HP 34905A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation.
The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 GHz bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies– create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 50 Ohm
– Cascade together for up to 16:1 multiplexer -
Power Sensor
HP-Agilent/Keysight 8484A
The HP/Agilent 8484A is a diode power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 435A/B, 436A, 437A/B, and 438A power meters. It is a high sensitivity sensor operating from 10 MHz to 18 GHz at power levels from -70 to -20 dBm. The 8484A High Sensitivity Power Sensor measures power from 0.1nW to 10 uW over a frequency range of 10MHz to 18GHz.
-
-
DC Electronic Load
Höcherl & Hackl PLI 2112 / H&H PLI2112
Höcherl & Hackl PLI 2112 Electronic Load
The PLI series of electronic loads provide a comfortable operation by a graphical user interface. The PLI series highlight is the extensive variety of standard interfaces. Apart from Ethernet, USB, RS-232 and Analog interface there is a standard CAN interface. Programming is done in SCPI syntax.
The units provide constant current mode, constant voltage mode, constant power mode and constant resistance mode. In addition, protections for current and voltage can be set in any mode. A static data acquisition function allows to store measurement data on an external USB flash drive. Dynamic operation can be configured by up to 300 list point settings. The Electronic Load saves the synchronously acquired measurement data with timestamp. A configurable trigger model controls data acquisition, static and dynamic settings.
Special applications, such as fuel cell tests, need to load the DUT down to almost 0 V. For these purposes we supply a range of models with an integrated zero-volt supply.– Voltage: 120 V
– Current: 60 A
– Power: 2100 W
Datasheet -
Oscilloscope 2 channels
TEKTRONIX 2230
The Tektronix 2230 is a portable 100 MHz, dual-channel combination analog / digital storage scope, sister model of 2220 and 2221.
It has both an analog mode and a digital mode. In the digital storage mode, up to three waveform sets (CH 1 and/or CH 2) may be stored in a save ref. memory and recalled for display at a later time.
The 2230 features alphanumeric CRT readout of many of the front panel controls. It has a DB-9 auxiliary connector on the right side providing an external clock input as well as an output for an analog X-Y plotter to make permanent copies of the display. This feature can be accessed through the “Mem select” menu.
Some Firmware versions have a diagnostics menu with the Tektronix logo and wizard image.Vertical —
Input impedance 1 MΩ // 20 pF
Maximum Safe Input Voltage 400 V (dc + peak AC) or 800 Vp-p AC
CMRR At least 10:1 at 10 MHz
— Horizontal —
Timebase A 50 ns/Div to 0.5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div. In “Store” mode lower sweep speeds up to 5 s/Div are available
Timebase B 50 ns/Div to 5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div
Bandwidth 100 MHz (analog)
Sampling rate 20 MS/s
Record length 1K or 4K samples (single channel), optional 26K
Z axis input (intensity); DC to 20 MHz, maximum safe input 30V (dc + peak ac) Input resistance about 10kΩ
CRT display area : 8 × 10 cm²
Dimensions With feet and handle: 137 x 361 x 511 mm³
Features · X-Y operation
· Pre/Post-triggering
· Averaging
· Dual time base
· Cursors and readout
Datasheet -
NOISE SOURCE
HP-Agilent/Keysight R347B
La sorgente di rumore Keysight R347B copre una gamma di frequenza da 26,5 a 40 GHz. Questa sorgente di rumore a guida d'onda consente di effettuare misurazioni accurate e convenienti della figura di rumore su dispositivi a onde millimetriche. L'R347B fornisce un rumore a banda larga ad alta precisione all'ingresso del sistema o del componente in prova. Il misuratore della figura di rumore elabora quindi il rapporto ON/OFF della potenza di rumore presente nel sistema IF e fornisce una lettura accurata della figura di rumore e del guadagno. La sorgente di rumore R347B ha una notevole stabilità ENR nel tempo, che consente cicli di ricalibrazione più lunghi e misurazioni della figura di rumore più accurate. Prestazioni e affidabilità a frequenze millimetriche Eccellente stabilità ENR nel tempo Basso ROS
-
Digital Multimeter
HP-Agilent/Keysight 34401A
The Agilent 34401A multimeter is a tool kit of useful testing functions. In addition to the standard functions you´ve come to expect from a high quality digital multimeter, you also get many other capabilities, from min/max/avg to built-in limit testing. 6½ digit precision measurements for an affordable price means you can make measurements with confidence without breaking your budget. Features: 6½ digit resolution. 0.0035% 1 year dcV accuracy, 0.06% 1 year acV accuracy. Twelve measurement functions, plus limit testing and min/max/average. True RMS AC volts and current. 1000 readings/second in ASCII format across the GPIB bus. RS-232 and GPIB Standard, USB optional.
Datasheet -
Digital Multimeter
Flir T910973
– Quickly indicates the moisture content of materials with Pinless technology without damaging the surface
– Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length) – Manually store/recall up to 20 labeled readings
– Works on multiple wood types and other building materials
– Easy to read, large dual display with automatic backlight feature
– Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity
– Pinless measurement depth to 0.75″ (19mm) below the surface
– Programmable high/low Moisture and Humidity alarms – Designed with a patented IR circuit to measure non-contact surface temperature
– 8:1 distance to spot ratio with 0.95 fixed emissivity
– Built-in Humidity/Temperature probe measures Relative Humidity, Air
– Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP),
– Vapor Pressure, and condensation point
– Fast Analog Bargraph, Min/Max and Data Hold, Auto power off and low battery indication
– MeterLink Bluetooth transmitter wirelessly transmits moisture and humidity data to selected FLIR thermal imaging IR cameras to incorporate meter readings with thermal images
– Complete with pin moisture probe with cable, 9V battery and case -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers
-
Module
HP-Agilent/Keysight 34905A
The HP 34905A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation.
The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 GHz bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies– create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 50 Ohm
– Cascade together for up to 16:1 multiplexer -
Power Sensor
HP-Agilent/Keysight 8484A
The HP/Agilent 8484A is a diode power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 435A/B, 436A, 437A/B, and 438A power meters. It is a high sensitivity sensor operating from 10 MHz to 18 GHz at power levels from -70 to -20 dBm. The 8484A High Sensitivity Power Sensor measures power from 0.1nW to 10 uW over a frequency range of 10MHz to 18GHz.
-
-
DC Electronic Load
Höcherl & Hackl PLI 2112 / H&H PLI2112
Höcherl & Hackl PLI 2112 Electronic Load
The PLI series of electronic loads provide a comfortable operation by a graphical user interface. The PLI series highlight is the extensive variety of standard interfaces. Apart from Ethernet, USB, RS-232 and Analog interface there is a standard CAN interface. Programming is done in SCPI syntax.
The units provide constant current mode, constant voltage mode, constant power mode and constant resistance mode. In addition, protections for current and voltage can be set in any mode. A static data acquisition function allows to store measurement data on an external USB flash drive. Dynamic operation can be configured by up to 300 list point settings. The Electronic Load saves the synchronously acquired measurement data with timestamp. A configurable trigger model controls data acquisition, static and dynamic settings.
Special applications, such as fuel cell tests, need to load the DUT down to almost 0 V. For these purposes we supply a range of models with an integrated zero-volt supply.– Voltage: 120 V
– Current: 60 A
– Power: 2100 W
Datasheet -
Oscilloscope 2 channels
TEKTRONIX 2230
The Tektronix 2230 is a portable 100 MHz, dual-channel combination analog / digital storage scope, sister model of 2220 and 2221.
It has both an analog mode and a digital mode. In the digital storage mode, up to three waveform sets (CH 1 and/or CH 2) may be stored in a save ref. memory and recalled for display at a later time.
The 2230 features alphanumeric CRT readout of many of the front panel controls. It has a DB-9 auxiliary connector on the right side providing an external clock input as well as an output for an analog X-Y plotter to make permanent copies of the display. This feature can be accessed through the “Mem select” menu.
Some Firmware versions have a diagnostics menu with the Tektronix logo and wizard image.Vertical —
Input impedance 1 MΩ // 20 pF
Maximum Safe Input Voltage 400 V (dc + peak AC) or 800 Vp-p AC
CMRR At least 10:1 at 10 MHz
— Horizontal —
Timebase A 50 ns/Div to 0.5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div. In “Store” mode lower sweep speeds up to 5 s/Div are available
Timebase B 50 ns/Div to 5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div
Bandwidth 100 MHz (analog)
Sampling rate 20 MS/s
Record length 1K or 4K samples (single channel), optional 26K
Z axis input (intensity); DC to 20 MHz, maximum safe input 30V (dc + peak ac) Input resistance about 10kΩ
CRT display area : 8 × 10 cm²
Dimensions With feet and handle: 137 x 361 x 511 mm³
Features · X-Y operation
· Pre/Post-triggering
· Averaging
· Dual time base
· Cursors and readout
Datasheet -
NOISE SOURCE
HP-Agilent/Keysight R347B
La sorgente di rumore Keysight R347B copre una gamma di frequenza da 26,5 a 40 GHz. Questa sorgente di rumore a guida d'onda consente di effettuare misurazioni accurate e convenienti della figura di rumore su dispositivi a onde millimetriche. L'R347B fornisce un rumore a banda larga ad alta precisione all'ingresso del sistema o del componente in prova. Il misuratore della figura di rumore elabora quindi il rapporto ON/OFF della potenza di rumore presente nel sistema IF e fornisce una lettura accurata della figura di rumore e del guadagno. La sorgente di rumore R347B ha una notevole stabilità ENR nel tempo, che consente cicli di ricalibrazione più lunghi e misurazioni della figura di rumore più accurate. Prestazioni e affidabilità a frequenze millimetriche Eccellente stabilità ENR nel tempo Basso ROS
-
Digital Multimeter
HP-Agilent/Keysight 34401A
The Agilent 34401A multimeter is a tool kit of useful testing functions. In addition to the standard functions you´ve come to expect from a high quality digital multimeter, you also get many other capabilities, from min/max/avg to built-in limit testing. 6½ digit precision measurements for an affordable price means you can make measurements with confidence without breaking your budget. Features: 6½ digit resolution. 0.0035% 1 year dcV accuracy, 0.06% 1 year acV accuracy. Twelve measurement functions, plus limit testing and min/max/average. True RMS AC volts and current. 1000 readings/second in ASCII format across the GPIB bus. RS-232 and GPIB Standard, USB optional.
Datasheet -
Digital Multimeter
Flir T910973
– Quickly indicates the moisture content of materials with Pinless technology without damaging the surface
– Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length) – Manually store/recall up to 20 labeled readings
– Works on multiple wood types and other building materials
– Easy to read, large dual display with automatic backlight feature
– Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity
– Pinless measurement depth to 0.75″ (19mm) below the surface
– Programmable high/low Moisture and Humidity alarms – Designed with a patented IR circuit to measure non-contact surface temperature
– 8:1 distance to spot ratio with 0.95 fixed emissivity
– Built-in Humidity/Temperature probe measures Relative Humidity, Air
– Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP),
– Vapor Pressure, and condensation point
– Fast Analog Bargraph, Min/Max and Data Hold, Auto power off and low battery indication
– MeterLink Bluetooth transmitter wirelessly transmits moisture and humidity data to selected FLIR thermal imaging IR cameras to incorporate meter readings with thermal images
– Complete with pin moisture probe with cable, 9V battery and case -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers