ItalianoHP-Agilent/Keysight
Showing 91–120 of 455 results
-
Power Supply
AGILENT-Hp/Keysight 6675A
Output Ratings
Output voltage: 0 to 120 V
Output current (40°C): 0 to 18 AProgramming Accuracy at 25°C ±5°C
Voltage 0.04% + 120 mV
Current 0.1% + 12 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 1.9 mV
Peak-to-Peak: 16 mV
Current rms: 12 mAHp high performance DC power supplies offer speed and accuracy for test optimization. The single output, 2000 W GPIB 6671A-6675A provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Hp 2160W, GPIB, single output 6675A is a highly efficient low-noise supply that maximize test throughput and is designed to offer excellent reliability, low ripple and noise, and extremely accurate built-in measurements of voltage and current.
DatasheetSKU: n/a -
Function/Arbitrary Waveform Generator
AGILENT-Hp/Keysight 33120A
The 33120A function generator has a proven legacy, 15 MHz bandwidth, arbitrary waveforms & modulation capability. DDS technology provides precise adjustment and frequency stability.
15 MHz sine & square waveforms
Ramp, triangle, noise & DC waveforms
12-bit, 40 MSa/s, 16,000 points arbitrary waveforms
AM (int/ext), FM (int), FSK (internal/external), burst (int/extl)
Linear & logarithmic sweeps and burst operation
IntuiLink software plus GPIB & RS-232 interfaces included
Option 001 provides improved stability & a multiple-unit link
DatasheetSKU: 72 -
Adapter
HP E5346A HIGH DENSITY PROBE ADAPTER
The HP E5346A Mictor probe provides a convenient and reliable connection to your target through a Mictor connector designed into your target. Route your signals of interest to the location containing the Mictor connector and when you are ready to measure these signals simply plug-in the Mictor probe. These probes can be used with a support shroud in environments where accidental unplugging of the probe is a concern. This probe can be used with any HP/Agilent logic analyzer with a 40-pin cable connector.
SKU: n/a -
Power Supply
HP-Agilent/Keysight 6645A
HP high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The HP 180W, GPIB, single output 6645A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
Output Ratings
Output voltage: 0 to 120 V
Output current (40° C): 0 to 1.5 A
Maximum current (50° C/55° C): 1.4 A/1.3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 51 mV
Current 0.15% + 1.7 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 700 µV
Voltage peak-to-peak: 7 mV
Current rms: 1 mA
DatasheetSKU: n/a -
Power Supply
KEYSIGHT – Agilent/Hp N8740A
Keysight's basic DC power supplies offer essential features for a tight budget. The Keysight N8740A is a 150 V, 22 A, 3300 W, single output power supply in a small 2U package. It offers flexible AC input options, analog/resistance control of output voltage and current, as well as parallel and series connection of multiple supplies to achieve more output current or voltage respectively.
Please select the AC input voltage option carefully. The AC input voltage hardware is permanently installed at the factory and cannot be changed under any circumstances after delivery. If the wrong AC input voltage option is purchased and delivered, the unit would need to be returned. Product returns are subject to Keysight approval and applicable charges. A new order would then have to be placed.
DC output ratingsVoltage: 150 V
Current: 22 A
Power: 3300 WProgramming accuracy
Voltage: 0.05% + 75 mV
Current: 0.1% + 44 mAOutput ripple and noise
CV p-p: 100 mV
CV rms: 25 mV
DatasheetSKU: n/a -
RF Plug
HP-Agilent/Keysight 83545A
The HP 83545A was designed to be used in the 8350 Mainframe
This unit is a RF Sweep Oscillator Plug-in offers high performance 5.9 to 12.4GHz frequency coverage with exceptionally high output power.
In addition, the 83545A provides slope compensation and complete HP-IB programmability.
The output power is internally leveled to at least 17 dB, with power variations less that 0.6 dB.SKU: 633 -
Signal Generator
HP-Agilent/Keysight 83650A
The Agilent 83650A synthesized sweeper is the standard of excellence for applications requiring the high performance and accuracy of a synthesized source and the speed and versatility of a sweep oscillator. Synthesized broadband frequency coverage and precise 1 Hz frequency resolution (Opt 008) are generated by indirect synthesis, enabling the Agilent 83650A to achieve low single-sideband phase noise performance. It delivers excellent harmonic performance with harmonics at least 50 dB below the carrier from 2.0 to 26.5 GHz, and at least 40 dB below the carrier above 26.5 GHz.
Features:
Scan modulation to simulate antenna scan patterns
Accurate fixed and swept frequency offset for two-tone measurement
User flatness correction for leveling at remote points in the test system
General purpose source for use in component test, receiver test and for frequency conversion
Sweep Modes: Step, List, Ramp
Maximum Power: +10 dBm 26.5 GHz
Maximum Power: +2.5 dBm >40 GHz
Power Sweep Range: -20 dBm to maximum power
Phase Noise (50 GHz at 10 KHz): -68 dBc
Max FM Deviation (locked): +/- 8 MHz
DatasheetSKU: n/a -
Power Supply
HP-Agilent/Keysight E3632A
DC power supplies basic programmable Keysight E3631A, E3632A, E3633A and E3634A offer users the performance of system power supplies at a very competitive price. All models offer clean power, excellent regulation, and fast transient response with integrated GPIB and RS-232 interfaces. While affordability is a key attribute, these power supplies have the quality and reliability needed to meet the most demanding applications, such as in R&D project verification, production testing and QA verification.
The E3632A-E3634A, 120-200W GPIB, single output device offers dual range outputs, compact size and contained for bench use; reduced output ripple and noise; and integrated and basic programmable sensing capabilities with GPIB and RS232 interface. Agilent's E3632A 120W, GPIB, Single Output Device is a high performance power supply optimized for basic and manual automated testing; in addition, with a combination of benchtop features and system functionality, it is designed to improve measurement quality and reduce test time.
DC power supplies Keysight offer essential features for a limited budget. The E3632A-E3634A, 120-200W GPIB, single output device offers dual range outputs, compact size and contained for bench use; reduced output ripple and noise; and integrated and basic programmable sensing capabilities with GPIB and RS232 interface. The Keysight 120W, GPIB, single output E3633A device is a high performance power supply optimized for manual and basic automated testing; in addition, with a combination of benchtop features and system functionality, it is designed to improve measurement quality and reduce test time.
Features
Output ratings
Range 1: 0 to 15 V, 7 A
Range 2: 0 to 30 V, 4 AProgramming accuracy at 25 ° C ± 5 ° C
Voltage: 0.05% + 10mV
Current: 0.2% +10 mARipple & noise (20 Hz to 20 MHz)
Normal-mode voltage
Normal-mode current
Common-mode currentReadback accuracy at 25 ° C ± 5 ° C
Voltage: 0.05% + 5mV
Current: 0.15% + 5 mA
Datasheet
SKU: 1084 -
Electronic Load Module
HP-Agilent/Keysight N3302A
Keysight N3302A è un modulo di carico elettronico da 150 W (0-30A, 0-60 V) per l'utilizzo nel mainframe di carico elettronico N3300A o N3301A nelle applicazioni di sistema. Il modulo di carico N3302A è rapido e preciso, per la programmazione in modalità corrente costante, tensione costante o resistenza costante o per effettuare misurazioni di tensione, corrente o potenza. L'N3302A può anche digitalizzare forme d'onda.
Il test di più alimentatori cc e convertitori cc / cc può richiedere molto tempo se ogni uscita deve essere testata in sequenza. Se le misurazioni vengono eseguite tramite un MUX utilizzando un DMM, questo è ciò che accadrà. Utilizzando le capacità di misurazione integrate dei carichi elettronici N3300A, è possibile misurare contemporaneamente tutte le uscite. In alternativa, è possibile testare contemporaneamente più fonti di alimentazione a uscita singola.
È sufficiente un unico indirizzo GPIB per il controllo completo e la rilettura del modulo di carico N3302A all'interno di un singolo mainframe N3300A o N3301A. Il carico elettronico N3302A offre un funzionamento rapido e la programmazione e la lettura accurate necessarie per i sistemi di test dell'alimentazione CC ad alto volume.
Valutazioni di input
Corrente: 0-30 A
Voltaggio: 0 – 60 V.
Potenza massima: 150 W.Modalità corrente costante
Low Range / High Range: 3 A / 30 A
Regolazione: 10 mA
Precisione gamma bassa: 0,1% + 5 mA
Precisione gamma alta: 0,1% + 10 mAModalità a tensione costante
Low Range / High Range: 6 V / 60 V
Regolamento: 5 mV
Precisione gamma bassa: 0,1% + 3 mV
Precisione di alta gamma: 0,1% + 8 mVModalità di resistenza costante
Intervallo 1 (I> 10% della corrente nominale): 0,067-4 Ω
Intervallo 2 (I> 1% della corrente nominale): 3,6-40 Ω
Intervallo 3 (I> 0,1% della corrente nominale): 36-400 Ω
Intervallo 4 (I> 0,01% della corrente nominale): 360-2000 Ω
Scheda TecnicaSKU: n/a
-
Power Supply
AGILENT-Hp/Keysight 6675A
Output Ratings
Output voltage: 0 to 120 V
Output current (40°C): 0 to 18 AProgramming Accuracy at 25°C ±5°C
Voltage 0.04% + 120 mV
Current 0.1% + 12 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 1.9 mV
Peak-to-Peak: 16 mV
Current rms: 12 mAHp high performance DC power supplies offer speed and accuracy for test optimization. The single output, 2000 W GPIB 6671A-6675A provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Hp 2160W, GPIB, single output 6675A is a highly efficient low-noise supply that maximize test throughput and is designed to offer excellent reliability, low ripple and noise, and extremely accurate built-in measurements of voltage and current.
Datasheet -
Function/Arbitrary Waveform Generator
AGILENT-Hp/Keysight 33120A
The 33120A function generator has a proven legacy, 15 MHz bandwidth, arbitrary waveforms & modulation capability. DDS technology provides precise adjustment and frequency stability.
15 MHz sine & square waveforms
Ramp, triangle, noise & DC waveforms
12-bit, 40 MSa/s, 16,000 points arbitrary waveforms
AM (int/ext), FM (int), FSK (internal/external), burst (int/extl)
Linear & logarithmic sweeps and burst operation
IntuiLink software plus GPIB & RS-232 interfaces included
Option 001 provides improved stability & a multiple-unit link
Datasheet -
Adapter
HP E5346A HIGH DENSITY PROBE ADAPTER
The HP E5346A Mictor probe provides a convenient and reliable connection to your target through a Mictor connector designed into your target. Route your signals of interest to the location containing the Mictor connector and when you are ready to measure these signals simply plug-in the Mictor probe. These probes can be used with a support shroud in environments where accidental unplugging of the probe is a concern. This probe can be used with any HP/Agilent logic analyzer with a 40-pin cable connector.
-
Power Supply
HP-Agilent/Keysight 6645A
HP high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The HP 180W, GPIB, single output 6645A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
Output Ratings
Output voltage: 0 to 120 V
Output current (40° C): 0 to 1.5 A
Maximum current (50° C/55° C): 1.4 A/1.3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 51 mV
Current 0.15% + 1.7 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 700 µV
Voltage peak-to-peak: 7 mV
Current rms: 1 mA
Datasheet -
Power Supply
KEYSIGHT – Agilent/Hp N8740A
Keysight's basic DC power supplies offer essential features for a tight budget. The Keysight N8740A is a 150 V, 22 A, 3300 W, single output power supply in a small 2U package. It offers flexible AC input options, analog/resistance control of output voltage and current, as well as parallel and series connection of multiple supplies to achieve more output current or voltage respectively.
Please select the AC input voltage option carefully. The AC input voltage hardware is permanently installed at the factory and cannot be changed under any circumstances after delivery. If the wrong AC input voltage option is purchased and delivered, the unit would need to be returned. Product returns are subject to Keysight approval and applicable charges. A new order would then have to be placed.
DC output ratingsVoltage: 150 V
Current: 22 A
Power: 3300 WProgramming accuracy
Voltage: 0.05% + 75 mV
Current: 0.1% + 44 mAOutput ripple and noise
CV p-p: 100 mV
CV rms: 25 mV
Datasheet -
RF Plug
HP-Agilent/Keysight 83545A
The HP 83545A was designed to be used in the 8350 Mainframe
This unit is a RF Sweep Oscillator Plug-in offers high performance 5.9 to 12.4GHz frequency coverage with exceptionally high output power.
In addition, the 83545A provides slope compensation and complete HP-IB programmability.
The output power is internally leveled to at least 17 dB, with power variations less that 0.6 dB. -
Signal Generator
HP-Agilent/Keysight 83650A
The Agilent 83650A synthesized sweeper is the standard of excellence for applications requiring the high performance and accuracy of a synthesized source and the speed and versatility of a sweep oscillator. Synthesized broadband frequency coverage and precise 1 Hz frequency resolution (Opt 008) are generated by indirect synthesis, enabling the Agilent 83650A to achieve low single-sideband phase noise performance. It delivers excellent harmonic performance with harmonics at least 50 dB below the carrier from 2.0 to 26.5 GHz, and at least 40 dB below the carrier above 26.5 GHz.
Features:
Scan modulation to simulate antenna scan patterns
Accurate fixed and swept frequency offset for two-tone measurement
User flatness correction for leveling at remote points in the test system
General purpose source for use in component test, receiver test and for frequency conversion
Sweep Modes: Step, List, Ramp
Maximum Power: +10 dBm 26.5 GHz
Maximum Power: +2.5 dBm >40 GHz
Power Sweep Range: -20 dBm to maximum power
Phase Noise (50 GHz at 10 KHz): -68 dBc
Max FM Deviation (locked): +/- 8 MHz
Datasheet -
Power Supply
HP-Agilent/Keysight E3632A
DC power supplies basic programmable Keysight E3631A, E3632A, E3633A and E3634A offer users the performance of system power supplies at a very competitive price. All models offer clean power, excellent regulation, and fast transient response with integrated GPIB and RS-232 interfaces. While affordability is a key attribute, these power supplies have the quality and reliability needed to meet the most demanding applications, such as in R&D project verification, production testing and QA verification.
The E3632A-E3634A, 120-200W GPIB, single output device offers dual range outputs, compact size and contained for bench use; reduced output ripple and noise; and integrated and basic programmable sensing capabilities with GPIB and RS232 interface. Agilent's E3632A 120W, GPIB, Single Output Device is a high performance power supply optimized for basic and manual automated testing; in addition, with a combination of benchtop features and system functionality, it is designed to improve measurement quality and reduce test time.
DC power supplies Keysight offer essential features for a limited budget. The E3632A-E3634A, 120-200W GPIB, single output device offers dual range outputs, compact size and contained for bench use; reduced output ripple and noise; and integrated and basic programmable sensing capabilities with GPIB and RS232 interface. The Keysight 120W, GPIB, single output E3633A device is a high performance power supply optimized for manual and basic automated testing; in addition, with a combination of benchtop features and system functionality, it is designed to improve measurement quality and reduce test time.
Features
Output ratings
Range 1: 0 to 15 V, 7 A
Range 2: 0 to 30 V, 4 AProgramming accuracy at 25 ° C ± 5 ° C
Voltage: 0.05% + 10mV
Current: 0.2% +10 mARipple & noise (20 Hz to 20 MHz)
Normal-mode voltage
Normal-mode current
Common-mode currentReadback accuracy at 25 ° C ± 5 ° C
Voltage: 0.05% + 5mV
Current: 0.15% + 5 mA
Datasheet
-
Electronic Load Module
HP-Agilent/Keysight N3302A
Keysight N3302A è un modulo di carico elettronico da 150 W (0-30A, 0-60 V) per l'utilizzo nel mainframe di carico elettronico N3300A o N3301A nelle applicazioni di sistema. Il modulo di carico N3302A è rapido e preciso, per la programmazione in modalità corrente costante, tensione costante o resistenza costante o per effettuare misurazioni di tensione, corrente o potenza. L'N3302A può anche digitalizzare forme d'onda.
Il test di più alimentatori cc e convertitori cc / cc può richiedere molto tempo se ogni uscita deve essere testata in sequenza. Se le misurazioni vengono eseguite tramite un MUX utilizzando un DMM, questo è ciò che accadrà. Utilizzando le capacità di misurazione integrate dei carichi elettronici N3300A, è possibile misurare contemporaneamente tutte le uscite. In alternativa, è possibile testare contemporaneamente più fonti di alimentazione a uscita singola.
È sufficiente un unico indirizzo GPIB per il controllo completo e la rilettura del modulo di carico N3302A all'interno di un singolo mainframe N3300A o N3301A. Il carico elettronico N3302A offre un funzionamento rapido e la programmazione e la lettura accurate necessarie per i sistemi di test dell'alimentazione CC ad alto volume.
Valutazioni di input
Corrente: 0-30 A
Voltaggio: 0 – 60 V.
Potenza massima: 150 W.Modalità corrente costante
Low Range / High Range: 3 A / 30 A
Regolazione: 10 mA
Precisione gamma bassa: 0,1% + 5 mA
Precisione gamma alta: 0,1% + 10 mAModalità a tensione costante
Low Range / High Range: 6 V / 60 V
Regolamento: 5 mV
Precisione gamma bassa: 0,1% + 3 mV
Precisione di alta gamma: 0,1% + 8 mVModalità di resistenza costante
Intervallo 1 (I> 10% della corrente nominale): 0,067-4 Ω
Intervallo 2 (I> 1% della corrente nominale): 3,6-40 Ω
Intervallo 3 (I> 0,1% della corrente nominale): 36-400 Ω
Intervallo 4 (I> 0,01% della corrente nominale): 360-2000 Ω
Scheda Tecnica
-
Power Supply
AGILENT-Hp/Keysight 6675A
Output Ratings
Output voltage: 0 to 120 V
Output current (40°C): 0 to 18 AProgramming Accuracy at 25°C ±5°C
Voltage 0.04% + 120 mV
Current 0.1% + 12 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 1.9 mV
Peak-to-Peak: 16 mV
Current rms: 12 mAHp high performance DC power supplies offer speed and accuracy for test optimization. The single output, 2000 W GPIB 6671A-6675A provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Hp 2160W, GPIB, single output 6675A is a highly efficient low-noise supply that maximize test throughput and is designed to offer excellent reliability, low ripple and noise, and extremely accurate built-in measurements of voltage and current.
Datasheet -
Function/Arbitrary Waveform Generator
AGILENT-Hp/Keysight 33120A
The 33120A function generator has a proven legacy, 15 MHz bandwidth, arbitrary waveforms & modulation capability. DDS technology provides precise adjustment and frequency stability.
15 MHz sine & square waveforms
Ramp, triangle, noise & DC waveforms
12-bit, 40 MSa/s, 16,000 points arbitrary waveforms
AM (int/ext), FM (int), FSK (internal/external), burst (int/extl)
Linear & logarithmic sweeps and burst operation
IntuiLink software plus GPIB & RS-232 interfaces included
Option 001 provides improved stability & a multiple-unit link
Datasheet -
Adapter
HP E5346A HIGH DENSITY PROBE ADAPTER
The HP E5346A Mictor probe provides a convenient and reliable connection to your target through a Mictor connector designed into your target. Route your signals of interest to the location containing the Mictor connector and when you are ready to measure these signals simply plug-in the Mictor probe. These probes can be used with a support shroud in environments where accidental unplugging of the probe is a concern. This probe can be used with any HP/Agilent logic analyzer with a 40-pin cable connector.
-
Power Supply
HP-Agilent/Keysight 6645A
HP high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The HP 180W, GPIB, single output 6645A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
Output Ratings
Output voltage: 0 to 120 V
Output current (40° C): 0 to 1.5 A
Maximum current (50° C/55° C): 1.4 A/1.3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 51 mV
Current 0.15% + 1.7 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 700 µV
Voltage peak-to-peak: 7 mV
Current rms: 1 mA
Datasheet -
Power Supply
KEYSIGHT – Agilent/Hp N8740A
Keysight's basic DC power supplies offer essential features for a tight budget. The Keysight N8740A is a 150 V, 22 A, 3300 W, single output power supply in a small 2U package. It offers flexible AC input options, analog/resistance control of output voltage and current, as well as parallel and series connection of multiple supplies to achieve more output current or voltage respectively.
Please select the AC input voltage option carefully. The AC input voltage hardware is permanently installed at the factory and cannot be changed under any circumstances after delivery. If the wrong AC input voltage option is purchased and delivered, the unit would need to be returned. Product returns are subject to Keysight approval and applicable charges. A new order would then have to be placed.
DC output ratingsVoltage: 150 V
Current: 22 A
Power: 3300 WProgramming accuracy
Voltage: 0.05% + 75 mV
Current: 0.1% + 44 mAOutput ripple and noise
CV p-p: 100 mV
CV rms: 25 mV
Datasheet -
RF Plug
HP-Agilent/Keysight 83545A
The HP 83545A was designed to be used in the 8350 Mainframe
This unit is a RF Sweep Oscillator Plug-in offers high performance 5.9 to 12.4GHz frequency coverage with exceptionally high output power.
In addition, the 83545A provides slope compensation and complete HP-IB programmability.
The output power is internally leveled to at least 17 dB, with power variations less that 0.6 dB. -
Signal Generator
HP-Agilent/Keysight 83650A
The Agilent 83650A synthesized sweeper is the standard of excellence for applications requiring the high performance and accuracy of a synthesized source and the speed and versatility of a sweep oscillator. Synthesized broadband frequency coverage and precise 1 Hz frequency resolution (Opt 008) are generated by indirect synthesis, enabling the Agilent 83650A to achieve low single-sideband phase noise performance. It delivers excellent harmonic performance with harmonics at least 50 dB below the carrier from 2.0 to 26.5 GHz, and at least 40 dB below the carrier above 26.5 GHz.
Features:
Scan modulation to simulate antenna scan patterns
Accurate fixed and swept frequency offset for two-tone measurement
User flatness correction for leveling at remote points in the test system
General purpose source for use in component test, receiver test and for frequency conversion
Sweep Modes: Step, List, Ramp
Maximum Power: +10 dBm 26.5 GHz
Maximum Power: +2.5 dBm >40 GHz
Power Sweep Range: -20 dBm to maximum power
Phase Noise (50 GHz at 10 KHz): -68 dBc
Max FM Deviation (locked): +/- 8 MHz
Datasheet -
Power Supply
HP-Agilent/Keysight E3632A
DC power supplies basic programmable Keysight E3631A, E3632A, E3633A and E3634A offer users the performance of system power supplies at a very competitive price. All models offer clean power, excellent regulation, and fast transient response with integrated GPIB and RS-232 interfaces. While affordability is a key attribute, these power supplies have the quality and reliability needed to meet the most demanding applications, such as in R&D project verification, production testing and QA verification.
The E3632A-E3634A, 120-200W GPIB, single output device offers dual range outputs, compact size and contained for bench use; reduced output ripple and noise; and integrated and basic programmable sensing capabilities with GPIB and RS232 interface. Agilent's E3632A 120W, GPIB, Single Output Device is a high performance power supply optimized for basic and manual automated testing; in addition, with a combination of benchtop features and system functionality, it is designed to improve measurement quality and reduce test time.
DC power supplies Keysight offer essential features for a limited budget. The E3632A-E3634A, 120-200W GPIB, single output device offers dual range outputs, compact size and contained for bench use; reduced output ripple and noise; and integrated and basic programmable sensing capabilities with GPIB and RS232 interface. The Keysight 120W, GPIB, single output E3633A device is a high performance power supply optimized for manual and basic automated testing; in addition, with a combination of benchtop features and system functionality, it is designed to improve measurement quality and reduce test time.
Features
Output ratings
Range 1: 0 to 15 V, 7 A
Range 2: 0 to 30 V, 4 AProgramming accuracy at 25 ° C ± 5 ° C
Voltage: 0.05% + 10mV
Current: 0.2% +10 mARipple & noise (20 Hz to 20 MHz)
Normal-mode voltage
Normal-mode current
Common-mode currentReadback accuracy at 25 ° C ± 5 ° C
Voltage: 0.05% + 5mV
Current: 0.15% + 5 mA
Datasheet
-
Electronic Load Module
HP-Agilent/Keysight N3302A
Keysight N3302A è un modulo di carico elettronico da 150 W (0-30A, 0-60 V) per l'utilizzo nel mainframe di carico elettronico N3300A o N3301A nelle applicazioni di sistema. Il modulo di carico N3302A è rapido e preciso, per la programmazione in modalità corrente costante, tensione costante o resistenza costante o per effettuare misurazioni di tensione, corrente o potenza. L'N3302A può anche digitalizzare forme d'onda.
Il test di più alimentatori cc e convertitori cc / cc può richiedere molto tempo se ogni uscita deve essere testata in sequenza. Se le misurazioni vengono eseguite tramite un MUX utilizzando un DMM, questo è ciò che accadrà. Utilizzando le capacità di misurazione integrate dei carichi elettronici N3300A, è possibile misurare contemporaneamente tutte le uscite. In alternativa, è possibile testare contemporaneamente più fonti di alimentazione a uscita singola.
È sufficiente un unico indirizzo GPIB per il controllo completo e la rilettura del modulo di carico N3302A all'interno di un singolo mainframe N3300A o N3301A. Il carico elettronico N3302A offre un funzionamento rapido e la programmazione e la lettura accurate necessarie per i sistemi di test dell'alimentazione CC ad alto volume.
Valutazioni di input
Corrente: 0-30 A
Voltaggio: 0 – 60 V.
Potenza massima: 150 W.Modalità corrente costante
Low Range / High Range: 3 A / 30 A
Regolazione: 10 mA
Precisione gamma bassa: 0,1% + 5 mA
Precisione gamma alta: 0,1% + 10 mAModalità a tensione costante
Low Range / High Range: 6 V / 60 V
Regolamento: 5 mV
Precisione gamma bassa: 0,1% + 3 mV
Precisione di alta gamma: 0,1% + 8 mVModalità di resistenza costante
Intervallo 1 (I> 10% della corrente nominale): 0,067-4 Ω
Intervallo 2 (I> 1% della corrente nominale): 3,6-40 Ω
Intervallo 3 (I> 0,1% della corrente nominale): 36-400 Ω
Intervallo 4 (I> 0,01% della corrente nominale): 360-2000 Ω
Scheda Tecnica