ItalianoAttenuator
Showing 1–30 of 36 results
-
Attenuator
FMI ROTARY ATTENUATOR 14110 + Qty 2 of 14094-NF10 + 14040 + 14270-20-04 + CASE
The Flann Mircrowave FMI 14110 is a rotary attenuator, with the following features and accessories:
– Frequency Range: 5.38 – 8.18 GHz.
– Attenuation Range: 0 – 60dB.– Qty. 2 of Flann Microwave 14094-NF10
– Flann Microwave 14040
– Flann Microwave 14270-20-04
– CaseSKU: n/a -
Attenuator
HP 11708A 30 dB Attenuator Pad, 50 MHz
The HP 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
* Frequency Range: 50 MHz
* Attenuation: 30 dB ± 0.05 dB
* 50 ohm impedance
* SWR: <1.05 at 50 MHzSKU: n/a -
Attenuator
HP 8494G Programmable Step Attenuator, DC to 4 GHz
The 8494G dc to 4 GHz programmable step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 1 dB steps from 0 to 11 dB. Precision gold-plated leaf springs ensure long-life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). To improve measurement accuracy, NIST traceable data (SWR and attenuation) is available as Option UK6. A maximum switching time of 20 ms (including contact settling) speeds automatic testing. Custom step attenuator/switch combinations are possible. The Keysight 11716A/B/C interconnect kits provide quick connection of Keysight 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
* Frequency range: dc to 4 GHz
* Insertion loss at 0 dB: 0.6 dB + 0.09 dB/GHz
* Maximum SWR: 1.5
* Repeatability life: 0.03 dB max 5 million cycles per section, typical
* 5 million cycles per section
* Maximum RF input power: 1 W (average), 100 W (peak)
* Connector type: choice of Type-N female, SMA female, APC-7
* Programming connector: 12-pin Viking, optional 14-pin DIPSKU: n/a -
Attenuator
M/A-COM EUROTEC 2082-6042-10
RF Attenuator – Coaxial from XMA
Connectors SMA Male (Plug)/ SMA Female (Jack)
18 GHz, 500 W
The overall length of the XMA SMA Coaxial Attenuators are .86 inch for 3, 6 and 10 dB and 1.02 Inches for 20 and 30 dB.
The body is passivated stainless steel round body design with an operating temp range of -65c to +125c.
The maximum VSWR is < 1.15:1 @ DC-4GHz, <1.25:1 @ 4-12.3 GHz and <1.35 @ 12.4-18. DatasheetSKU: n/a -
Attenuator
AGILENT-HP/Keysight 11713A
Features
Simple GPIB control of up to ten switch or attenuator sections
Drives two attenuators and two switches concurrently
Controls up to ten 24 V relaysThe Keysight 11713A attenuator/switch driver provides GPIB or “local” front panel drive control for programmable attenuators and electromechanical switches. Concurrently drive up to two Keysight 8494/5/6/7, Keysight 84904/6/7K/L programmable attenuators and two electromechanical switches (Keysight 8761, 8762, or 8765 series). The Keysight 11713A can also be used to supply +24 V common and ten pairs of current sinking contacts (total current draw less than 1.3A peak for 1 second, 0.65A steady state) to independently control up to 10 relays. An integral power supply with short circuit protection eliminates the need for an external power source. Each Keysight 11713A is supplied with two plug-in drive cables to simplify connection to programmable attenuators. Switching time is less than 10 milliseconds.
SKU: n/a -
Attenuator
AGILENT-HP/Keysight 8156A
OPTICAL ATTENUATOR 1310NM 1550NM SM 100 CONNECTOR STRAIGHT CONTACT
60dB attenuation with 0.001dB resolution, without ranging
1200nm to 1650nm wavelength range
60dB return loss
+23dBm maximum input powerThe Keysight 8156A optical attenuator is ideal for making measurements on fast telecommunication systems. It is employed in R&D and production and is suitable for both single-mode and 50m multi-mode application. A variety of options for different return loss performance, built-in monitor paths and overall accuracy make the 8156A easily adaptable to your measurement requirements.
SKU: n/a -
Attenuator
BIRD 300-A-FFN-30
30DB ATTENATUOR 300W 50Ω 2.4GHZ
300-A-FFN Series, Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quality, robust construction and conservative power ratings.
SpecificationsPower Rating: 300W
VSWR & Frequency Range:
1.10:1 from DC to 1 GHz
1.25:1 from 1 to 2.4 GHz
Impedance: 50 Ohms, nominal
Connector: N-Type Female Connectors
Cooling: Convection-CooledSKU: n/a -
Attenuator
HUBER SUHNER 6803.01.A + HUBER SUHNER 6806.01.A
HUBER+SUHNER 6803.01.A
RF Attenuator 50 Ω, 4 GHz, 3 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (femaleHUBER+SUHNER 6806.01.A
RF Attenuator 50 Ω, 4 GHz, 6 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (female)
Datasheet 6806.01.A
Datasheet 6803.01.ASKU: n/a
-
Attenuator
FMI ROTARY ATTENUATOR 14110 + Qty 2 of 14094-NF10 + 14040 + 14270-20-04 + CASE
The Flann Mircrowave FMI 14110 is a rotary attenuator, with the following features and accessories:
– Frequency Range: 5.38 – 8.18 GHz.
– Attenuation Range: 0 – 60dB.– Qty. 2 of Flann Microwave 14094-NF10
– Flann Microwave 14040
– Flann Microwave 14270-20-04
– Case -
Attenuator
HP 11708A 30 dB Attenuator Pad, 50 MHz
The HP 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
* Frequency Range: 50 MHz
* Attenuation: 30 dB ± 0.05 dB
* 50 ohm impedance
* SWR: <1.05 at 50 MHz -
Attenuator
HP 8494G Programmable Step Attenuator, DC to 4 GHz
The 8494G dc to 4 GHz programmable step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 1 dB steps from 0 to 11 dB. Precision gold-plated leaf springs ensure long-life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). To improve measurement accuracy, NIST traceable data (SWR and attenuation) is available as Option UK6. A maximum switching time of 20 ms (including contact settling) speeds automatic testing. Custom step attenuator/switch combinations are possible. The Keysight 11716A/B/C interconnect kits provide quick connection of Keysight 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
* Frequency range: dc to 4 GHz
* Insertion loss at 0 dB: 0.6 dB + 0.09 dB/GHz
* Maximum SWR: 1.5
* Repeatability life: 0.03 dB max 5 million cycles per section, typical
* 5 million cycles per section
* Maximum RF input power: 1 W (average), 100 W (peak)
* Connector type: choice of Type-N female, SMA female, APC-7
* Programming connector: 12-pin Viking, optional 14-pin DIP -
Attenuator
M/A-COM EUROTEC 2082-6042-10
RF Attenuator – Coaxial from XMA
Connectors SMA Male (Plug)/ SMA Female (Jack)
18 GHz, 500 W
The overall length of the XMA SMA Coaxial Attenuators are .86 inch for 3, 6 and 10 dB and 1.02 Inches for 20 and 30 dB.
The body is passivated stainless steel round body design with an operating temp range of -65c to +125c.
The maximum VSWR is < 1.15:1 @ DC-4GHz, <1.25:1 @ 4-12.3 GHz and <1.35 @ 12.4-18. Datasheet -
Attenuator
AGILENT-HP/Keysight 11713A
Features
Simple GPIB control of up to ten switch or attenuator sections
Drives two attenuators and two switches concurrently
Controls up to ten 24 V relaysThe Keysight 11713A attenuator/switch driver provides GPIB or “local” front panel drive control for programmable attenuators and electromechanical switches. Concurrently drive up to two Keysight 8494/5/6/7, Keysight 84904/6/7K/L programmable attenuators and two electromechanical switches (Keysight 8761, 8762, or 8765 series). The Keysight 11713A can also be used to supply +24 V common and ten pairs of current sinking contacts (total current draw less than 1.3A peak for 1 second, 0.65A steady state) to independently control up to 10 relays. An integral power supply with short circuit protection eliminates the need for an external power source. Each Keysight 11713A is supplied with two plug-in drive cables to simplify connection to programmable attenuators. Switching time is less than 10 milliseconds.
-
Attenuator
AGILENT-HP/Keysight 8156A
OPTICAL ATTENUATOR 1310NM 1550NM SM 100 CONNECTOR STRAIGHT CONTACT
60dB attenuation with 0.001dB resolution, without ranging
1200nm to 1650nm wavelength range
60dB return loss
+23dBm maximum input powerThe Keysight 8156A optical attenuator is ideal for making measurements on fast telecommunication systems. It is employed in R&D and production and is suitable for both single-mode and 50m multi-mode application. A variety of options for different return loss performance, built-in monitor paths and overall accuracy make the 8156A easily adaptable to your measurement requirements.
-
Attenuator
BIRD 300-A-FFN-30
30DB ATTENATUOR 300W 50Ω 2.4GHZ
300-A-FFN Series, Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quality, robust construction and conservative power ratings.
SpecificationsPower Rating: 300W
VSWR & Frequency Range:
1.10:1 from DC to 1 GHz
1.25:1 from 1 to 2.4 GHz
Impedance: 50 Ohms, nominal
Connector: N-Type Female Connectors
Cooling: Convection-Cooled -
Attenuator
HUBER SUHNER 6803.01.A + HUBER SUHNER 6806.01.A
HUBER+SUHNER 6803.01.A
RF Attenuator 50 Ω, 4 GHz, 3 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (femaleHUBER+SUHNER 6806.01.A
RF Attenuator 50 Ω, 4 GHz, 6 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (female)
Datasheet 6806.01.A
Datasheet 6803.01.A
-
Attenuator
FMI ROTARY ATTENUATOR 14110 + Qty 2 of 14094-NF10 + 14040 + 14270-20-04 + CASE
The Flann Mircrowave FMI 14110 is a rotary attenuator, with the following features and accessories:
– Frequency Range: 5.38 – 8.18 GHz.
– Attenuation Range: 0 – 60dB.– Qty. 2 of Flann Microwave 14094-NF10
– Flann Microwave 14040
– Flann Microwave 14270-20-04
– Case -
Attenuator
HP 11708A 30 dB Attenuator Pad, 50 MHz
The HP 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
* Frequency Range: 50 MHz
* Attenuation: 30 dB ± 0.05 dB
* 50 ohm impedance
* SWR: <1.05 at 50 MHz -
Attenuator
HP 8494G Programmable Step Attenuator, DC to 4 GHz
The 8494G dc to 4 GHz programmable step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 1 dB steps from 0 to 11 dB. Precision gold-plated leaf springs ensure long-life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). To improve measurement accuracy, NIST traceable data (SWR and attenuation) is available as Option UK6. A maximum switching time of 20 ms (including contact settling) speeds automatic testing. Custom step attenuator/switch combinations are possible. The Keysight 11716A/B/C interconnect kits provide quick connection of Keysight 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
* Frequency range: dc to 4 GHz
* Insertion loss at 0 dB: 0.6 dB + 0.09 dB/GHz
* Maximum SWR: 1.5
* Repeatability life: 0.03 dB max 5 million cycles per section, typical
* 5 million cycles per section
* Maximum RF input power: 1 W (average), 100 W (peak)
* Connector type: choice of Type-N female, SMA female, APC-7
* Programming connector: 12-pin Viking, optional 14-pin DIP -
Attenuator
M/A-COM EUROTEC 2082-6042-10
RF Attenuator – Coaxial from XMA
Connectors SMA Male (Plug)/ SMA Female (Jack)
18 GHz, 500 W
The overall length of the XMA SMA Coaxial Attenuators are .86 inch for 3, 6 and 10 dB and 1.02 Inches for 20 and 30 dB.
The body is passivated stainless steel round body design with an operating temp range of -65c to +125c.
The maximum VSWR is < 1.15:1 @ DC-4GHz, <1.25:1 @ 4-12.3 GHz and <1.35 @ 12.4-18. Datasheet -
Attenuator
AGILENT-HP/Keysight 11713A
Features
Simple GPIB control of up to ten switch or attenuator sections
Drives two attenuators and two switches concurrently
Controls up to ten 24 V relaysThe Keysight 11713A attenuator/switch driver provides GPIB or “local” front panel drive control for programmable attenuators and electromechanical switches. Concurrently drive up to two Keysight 8494/5/6/7, Keysight 84904/6/7K/L programmable attenuators and two electromechanical switches (Keysight 8761, 8762, or 8765 series). The Keysight 11713A can also be used to supply +24 V common and ten pairs of current sinking contacts (total current draw less than 1.3A peak for 1 second, 0.65A steady state) to independently control up to 10 relays. An integral power supply with short circuit protection eliminates the need for an external power source. Each Keysight 11713A is supplied with two plug-in drive cables to simplify connection to programmable attenuators. Switching time is less than 10 milliseconds.
-
Attenuator
AGILENT-HP/Keysight 8156A
OPTICAL ATTENUATOR 1310NM 1550NM SM 100 CONNECTOR STRAIGHT CONTACT
60dB attenuation with 0.001dB resolution, without ranging
1200nm to 1650nm wavelength range
60dB return loss
+23dBm maximum input powerThe Keysight 8156A optical attenuator is ideal for making measurements on fast telecommunication systems. It is employed in R&D and production and is suitable for both single-mode and 50m multi-mode application. A variety of options for different return loss performance, built-in monitor paths and overall accuracy make the 8156A easily adaptable to your measurement requirements.
-
Attenuator
BIRD 300-A-FFN-30
30DB ATTENATUOR 300W 50Ω 2.4GHZ
300-A-FFN Series, Attenuators are a valuable and reliable accessory for reducing power levels, for isolating components under test, for harmonic signal analysis, and as comparison standards. They are world renowned for their high-quality, robust construction and conservative power ratings.
SpecificationsPower Rating: 300W
VSWR & Frequency Range:
1.10:1 from DC to 1 GHz
1.25:1 from 1 to 2.4 GHz
Impedance: 50 Ohms, nominal
Connector: N-Type Female Connectors
Cooling: Convection-Cooled -
Attenuator
HUBER SUHNER 6803.01.A + HUBER SUHNER 6806.01.A
HUBER+SUHNER 6803.01.A
RF Attenuator 50 Ω, 4 GHz, 3 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (femaleHUBER+SUHNER 6806.01.A
RF Attenuator 50 Ω, 4 GHz, 6 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (female)
Datasheet 6806.01.A
Datasheet 6803.01.A