ItalianoHP-Agilent/Keysight
Showing 31–60 of 455 results
-
Power Source / Power Analyzer
HP-Agilent/Keysight 85901A
The Keysight 85901A Portable AC Power Source works with your test equipment to provide the power you need, where you need it. The power source is small, with a briefcase handle that makes it easy to carry and it fits into tight spots. You can use the built-in battery of the power source or connect it to an external 12 Vdc source for even longer operation.
200 Watts continuous output
115 Vrms or 230 Vrms output
Internal battery or external 12 Vdc source
Built-in charger
Up to 2 hour operation of Keysight 8590 Series Spectrum Analyzers
Easy to carry
DatasheetSKU: n/a -
Spectrum Analyzer
HP-Agilent/Keysight 8594EM
Spectrum Analyzer – Frequency 9 kHz to 2.9 GHz – Input Impedance 50 Ohm – Sweep Time 20 ms to 100 s – Resolution Bandwidth 30 Hz to 3 MHz – Single-Side-Band Noise -105 dBc/Hz to -90 dBc/Hz – Maximum Safe AC Input 30 dBm – Maximum DC Input 0 V – Displayed Average Noise -122 dBm to -107 dBm
9 kHz to 2.9 GHzSKU: 539 -
Transmission Analyzers
HP 37721A Digital Transmission Analyzer opt. 001-003
The 37718A communications performance analyzer is a single-box portable multi-rate BER and jitter tester up to 2.5 Gb/s (OC-48/STM-16) for development, qualification and manufacture of SONET, SDH, ATM and POS network equipment, sub-assemblies, line cards and devices.
* ATM and POS test capability to 2.5 Gb/s
* Concatenated payloads at all synchronous rates up to 2.5 Gb/s
* SmartTest facility for fast test setup
* Automatic detection of mixed payload signal structures
* Accurate measurement of protection switching times (ring and linear networks)
* Jitter generation and measurement at all rates (1.5, 2, 8, 34, 45, 140, 52, 155, 622 and 2,488 Mb/s)
* Jitter testing to ITU-T and Telcordia recommendationsSKU: n/a -
Fucntion/Arbitrary Waveform Generatr
HP-Agilent/Keysight 33120A
The 33120A function generator has a proven legacy, 15 MHz bandwidth, arbitrary waveforms & modulation capability. DDS technology provides precise adjustment and frequency stability.
15 MHz sine & square waveforms
Ramp, triangle, noise & DC waveforms
12-bit, 40 MSa/s, 16,000 points arbitrary waveforms
AM (int/ext), FM (int), FSK (internal/external), burst (int/extl)
Linear & logarithmic sweeps and burst operation
IntuiLink software plus GPIB & RS-232 interfaces included
Option 001 provides improved stability & a multiple-unit link
DatasheetSKU: n/a -
Power Meter
HP-Agilent/Keysight 437B
The Keysight 437B power meter is a low-cost, high-performance, single-channel, programmable, average power meter compatible with the 8480 family of power sensors. Depending on which power sensor is used, the 437B can measure from -70 dBm (100pW) to +44 dBm (25W) at frequencies from 100 kHz to 110 GHz.
Designed for the ATE systems and demanding benchtop measurements, the 437B power meter makes fast, accurate, and reliable average power measurements. Only three inches high and half rack wide, the 437B minimizes the use of critical rack space in ATE systems. The advanced plastics technology used in the 437B cabinet combines the light weight of plastic with the shielding effectiveness of metal, making the 437B the only power meter to meet MIL-STD-461C EMI specifications.
Power reference for automatic calibration and zeroing
Duty cycle entry for a convenient peak power representation of the measurement average power
Ten preloaded sensor card factors versus frequency
Frequency Range: 100 kHz to 110 GHz
DatasheetSKU: 815
-
Power Source / Power Analyzer
HP-Agilent/Keysight 85901A
The Keysight 85901A Portable AC Power Source works with your test equipment to provide the power you need, where you need it. The power source is small, with a briefcase handle that makes it easy to carry and it fits into tight spots. You can use the built-in battery of the power source or connect it to an external 12 Vdc source for even longer operation.
200 Watts continuous output
115 Vrms or 230 Vrms output
Internal battery or external 12 Vdc source
Built-in charger
Up to 2 hour operation of Keysight 8590 Series Spectrum Analyzers
Easy to carry
Datasheet -
Spectrum Analyzer
HP-Agilent/Keysight 8594EM
Spectrum Analyzer – Frequency 9 kHz to 2.9 GHz – Input Impedance 50 Ohm – Sweep Time 20 ms to 100 s – Resolution Bandwidth 30 Hz to 3 MHz – Single-Side-Band Noise -105 dBc/Hz to -90 dBc/Hz – Maximum Safe AC Input 30 dBm – Maximum DC Input 0 V – Displayed Average Noise -122 dBm to -107 dBm
9 kHz to 2.9 GHz -
Transmission Analyzers
HP 37721A Digital Transmission Analyzer opt. 001-003
The 37718A communications performance analyzer is a single-box portable multi-rate BER and jitter tester up to 2.5 Gb/s (OC-48/STM-16) for development, qualification and manufacture of SONET, SDH, ATM and POS network equipment, sub-assemblies, line cards and devices.
* ATM and POS test capability to 2.5 Gb/s
* Concatenated payloads at all synchronous rates up to 2.5 Gb/s
* SmartTest facility for fast test setup
* Automatic detection of mixed payload signal structures
* Accurate measurement of protection switching times (ring and linear networks)
* Jitter generation and measurement at all rates (1.5, 2, 8, 34, 45, 140, 52, 155, 622 and 2,488 Mb/s)
* Jitter testing to ITU-T and Telcordia recommendations -
Fucntion/Arbitrary Waveform Generatr
HP-Agilent/Keysight 33120A
The 33120A function generator has a proven legacy, 15 MHz bandwidth, arbitrary waveforms & modulation capability. DDS technology provides precise adjustment and frequency stability.
15 MHz sine & square waveforms
Ramp, triangle, noise & DC waveforms
12-bit, 40 MSa/s, 16,000 points arbitrary waveforms
AM (int/ext), FM (int), FSK (internal/external), burst (int/extl)
Linear & logarithmic sweeps and burst operation
IntuiLink software plus GPIB & RS-232 interfaces included
Option 001 provides improved stability & a multiple-unit link
Datasheet -
Power Meter
HP-Agilent/Keysight 437B
The Keysight 437B power meter is a low-cost, high-performance, single-channel, programmable, average power meter compatible with the 8480 family of power sensors. Depending on which power sensor is used, the 437B can measure from -70 dBm (100pW) to +44 dBm (25W) at frequencies from 100 kHz to 110 GHz.
Designed for the ATE systems and demanding benchtop measurements, the 437B power meter makes fast, accurate, and reliable average power measurements. Only three inches high and half rack wide, the 437B minimizes the use of critical rack space in ATE systems. The advanced plastics technology used in the 437B cabinet combines the light weight of plastic with the shielding effectiveness of metal, making the 437B the only power meter to meet MIL-STD-461C EMI specifications.
Power reference for automatic calibration and zeroing
Duty cycle entry for a convenient peak power representation of the measurement average power
Ten preloaded sensor card factors versus frequency
Frequency Range: 100 kHz to 110 GHz
Datasheet
-
Power Source / Power Analyzer
HP-Agilent/Keysight 85901A
The Keysight 85901A Portable AC Power Source works with your test equipment to provide the power you need, where you need it. The power source is small, with a briefcase handle that makes it easy to carry and it fits into tight spots. You can use the built-in battery of the power source or connect it to an external 12 Vdc source for even longer operation.
200 Watts continuous output
115 Vrms or 230 Vrms output
Internal battery or external 12 Vdc source
Built-in charger
Up to 2 hour operation of Keysight 8590 Series Spectrum Analyzers
Easy to carry
Datasheet -
Spectrum Analyzer
HP-Agilent/Keysight 8594EM
Spectrum Analyzer – Frequency 9 kHz to 2.9 GHz – Input Impedance 50 Ohm – Sweep Time 20 ms to 100 s – Resolution Bandwidth 30 Hz to 3 MHz – Single-Side-Band Noise -105 dBc/Hz to -90 dBc/Hz – Maximum Safe AC Input 30 dBm – Maximum DC Input 0 V – Displayed Average Noise -122 dBm to -107 dBm
9 kHz to 2.9 GHz -
Transmission Analyzers
HP 37721A Digital Transmission Analyzer opt. 001-003
The 37718A communications performance analyzer is a single-box portable multi-rate BER and jitter tester up to 2.5 Gb/s (OC-48/STM-16) for development, qualification and manufacture of SONET, SDH, ATM and POS network equipment, sub-assemblies, line cards and devices.
* ATM and POS test capability to 2.5 Gb/s
* Concatenated payloads at all synchronous rates up to 2.5 Gb/s
* SmartTest facility for fast test setup
* Automatic detection of mixed payload signal structures
* Accurate measurement of protection switching times (ring and linear networks)
* Jitter generation and measurement at all rates (1.5, 2, 8, 34, 45, 140, 52, 155, 622 and 2,488 Mb/s)
* Jitter testing to ITU-T and Telcordia recommendations -
Fucntion/Arbitrary Waveform Generatr
HP-Agilent/Keysight 33120A
The 33120A function generator has a proven legacy, 15 MHz bandwidth, arbitrary waveforms & modulation capability. DDS technology provides precise adjustment and frequency stability.
15 MHz sine & square waveforms
Ramp, triangle, noise & DC waveforms
12-bit, 40 MSa/s, 16,000 points arbitrary waveforms
AM (int/ext), FM (int), FSK (internal/external), burst (int/extl)
Linear & logarithmic sweeps and burst operation
IntuiLink software plus GPIB & RS-232 interfaces included
Option 001 provides improved stability & a multiple-unit link
Datasheet -
Power Meter
HP-Agilent/Keysight 437B
The Keysight 437B power meter is a low-cost, high-performance, single-channel, programmable, average power meter compatible with the 8480 family of power sensors. Depending on which power sensor is used, the 437B can measure from -70 dBm (100pW) to +44 dBm (25W) at frequencies from 100 kHz to 110 GHz.
Designed for the ATE systems and demanding benchtop measurements, the 437B power meter makes fast, accurate, and reliable average power measurements. Only three inches high and half rack wide, the 437B minimizes the use of critical rack space in ATE systems. The advanced plastics technology used in the 437B cabinet combines the light weight of plastic with the shielding effectiveness of metal, making the 437B the only power meter to meet MIL-STD-461C EMI specifications.
Power reference for automatic calibration and zeroing
Duty cycle entry for a convenient peak power representation of the measurement average power
Ten preloaded sensor card factors versus frequency
Frequency Range: 100 kHz to 110 GHz
Datasheet