ItalianoHP-Agilent/Keysight
Showing 121–150 of 455 results
-
Multifunction Switch/Measure Unit
HP-Agilent/Keysight 34980A
The Agilent 34980A is a flexible, reliable switching and data acquisition platform with more than 20 modules to help you customize your test system.
Key Features & Specifications:
– Eight-slot mainframe, choice of 21-plug-in modules 34980A Multifunction Switch/Measure Unit Summary
– Built-in DMM with 6½ digits (22 bits) of resolution
– Scan rates of up to 1000 channels/second
– Standard LAN, USB, and GPIB connectivity to PC, LXI compliant
– Easy remote access with built-in Web interface
– Up to 560 2-wire mux or 4096 matrix cross-points in one mainframeSKU: 1015 -
Module
AGILENT 34903A – 20 Channel Actuator/GP Switch Module for 34970A/34972A
The Agilent 34903A is a general-purpose switch module for the 34970A/34972A Data Acquisition/Switch Unit. It has 20 independent single-pole, double-throw (SPDT) relays and is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. Its 300 V, 1 A contacts can handle up to 50 W, enough for many power line switching applications.
* 20 Channel Actuator/GP Switch
* SPDT (Form C) latching relays
* 300 V, 1 A actuation and controlSKU: 1142 -
Function Generator
HP-Agilent/Keysight 8116A
The fully programmable HP 8116A features pulse as well as function generator capabilities in one small unit. A broad 1 mHz-50 MHz band for all waveforms and a wide choice of operating and modulating modes assure high flexibility. These factors, plus good repeatability, make the HP 8116A a sound, long-term investment.
HP's custom IC's have made it feasible to put the many HP 8116A capabilities into such a small volume. Handling is simplified by a unique, microprocessor-controlled, operating concept which ensures a clear overview of the compact front panel at all times. When the mode and waveform have been selected, illuminated labels show which parameters must be set.
Level or amplitude programming. The HP 8116A's output can be programmed in terms of high and low levels or in terms of amplitude and offset. Consequently a direct, automatic, conversion is always feasible so that the HP 8116A can be programmed in the same terms as the device is specified.
Safe limit. Devices can be protected by the limit feature. This prevents the output from exceeding a given magnitude.
DatasheetSKU: n/a -
NOISE SOURCE
HP-AGILENT/KEYSIGHT 346C
HP 346C Noise Source, 10 MHz to 26.5 GHz, nominal ENR 15 dB
The HP 346C noise source is the ideal companion to Keysight's noise figure solutions. Since it is broadband (10 MHz to 26.5 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source reduces a major source of measurement uncertainty; reflections of test signals. Option K01 is a coaxial noise source and features coverage from 1 to 50 GHz with a 2.4 mm coaxial connector.
• Frequency range: 10 MHz to 26.5 GHz
• VSWR: < 1.35:1 • Connectors: BNC (f) input bias / 3.5 mm (m) • Low SWR for reducing noise figure measurement uncertainty • Individually calibrated ENR values at specific frequencies DatasheetSKU: 75 -
Pulse Pattern Generator
AGILENT-Hp/Keysight 81101A
The Keysight 81101A 50 MHz single-channel Pulse Generator is the economy, entry-level instrument of the 81100 family. All timing parameters (repetition rate, delay, width and transitions) are variable.
The instrument comprises a PLL oscillator that enables the repetition rate to be kept within 0.01% accuracy.
Double-pulses and pulse bursts are available. All pulses can be triggered externally when the PLL is turned off. Bursts can also be triggered by the internal PLL if it is not in use as the repetition-rate generator. An external width (pulse recovery) mode is available, too.
The selectable 50/1000 Ohm source resistance allows output amplitudes up to 10 or 20 Vpp respectively into a 50 Ohm load.
Single-channel pulse generator
50 MHz, 10 V from 50 Ohm into 50 Ohm
Triggerable / PLL operation selectable
Pulse / burst modes selectable
Variable transition times
BNC outputs, single-ended
DatasheetSKU: n/a -
Digital Multimeter
HP-Agilent/Keysight 3458A
-8 ½ digits with 10 nV DC resolution -8-ppm 1 year dcV accuracy, optional 4-ppm -0.05 ppm dcV transfer accuracy -100,000 readings per second at 4 ½ digits -2- and 4-wire ohms measurements with offset compensation -Superior AC voltage measurements
- DISPONIBILE A STOCK
8½ Digit
SKU: 92
-
Multifunction Switch/Measure Unit
HP-Agilent/Keysight 34980A
The Agilent 34980A is a flexible, reliable switching and data acquisition platform with more than 20 modules to help you customize your test system.
Key Features & Specifications:
– Eight-slot mainframe, choice of 21-plug-in modules 34980A Multifunction Switch/Measure Unit Summary
– Built-in DMM with 6½ digits (22 bits) of resolution
– Scan rates of up to 1000 channels/second
– Standard LAN, USB, and GPIB connectivity to PC, LXI compliant
– Easy remote access with built-in Web interface
– Up to 560 2-wire mux or 4096 matrix cross-points in one mainframe -
Module
AGILENT 34903A – 20 Channel Actuator/GP Switch Module for 34970A/34972A
The Agilent 34903A is a general-purpose switch module for the 34970A/34972A Data Acquisition/Switch Unit. It has 20 independent single-pole, double-throw (SPDT) relays and is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. Its 300 V, 1 A contacts can handle up to 50 W, enough for many power line switching applications.
* 20 Channel Actuator/GP Switch
* SPDT (Form C) latching relays
* 300 V, 1 A actuation and control -
Function Generator
HP-Agilent/Keysight 8116A
The fully programmable HP 8116A features pulse as well as function generator capabilities in one small unit. A broad 1 mHz-50 MHz band for all waveforms and a wide choice of operating and modulating modes assure high flexibility. These factors, plus good repeatability, make the HP 8116A a sound, long-term investment.
HP's custom IC's have made it feasible to put the many HP 8116A capabilities into such a small volume. Handling is simplified by a unique, microprocessor-controlled, operating concept which ensures a clear overview of the compact front panel at all times. When the mode and waveform have been selected, illuminated labels show which parameters must be set.
Level or amplitude programming. The HP 8116A's output can be programmed in terms of high and low levels or in terms of amplitude and offset. Consequently a direct, automatic, conversion is always feasible so that the HP 8116A can be programmed in the same terms as the device is specified.
Safe limit. Devices can be protected by the limit feature. This prevents the output from exceeding a given magnitude.
Datasheet -
NOISE SOURCE
HP-AGILENT/KEYSIGHT 346C
HP 346C Noise Source, 10 MHz to 26.5 GHz, nominal ENR 15 dB
The HP 346C noise source is the ideal companion to Keysight's noise figure solutions. Since it is broadband (10 MHz to 26.5 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source reduces a major source of measurement uncertainty; reflections of test signals. Option K01 is a coaxial noise source and features coverage from 1 to 50 GHz with a 2.4 mm coaxial connector.
• Frequency range: 10 MHz to 26.5 GHz
• VSWR: < 1.35:1 • Connectors: BNC (f) input bias / 3.5 mm (m) • Low SWR for reducing noise figure measurement uncertainty • Individually calibrated ENR values at specific frequencies Datasheet -
Pulse Pattern Generator
AGILENT-Hp/Keysight 81101A
The Keysight 81101A 50 MHz single-channel Pulse Generator is the economy, entry-level instrument of the 81100 family. All timing parameters (repetition rate, delay, width and transitions) are variable.
The instrument comprises a PLL oscillator that enables the repetition rate to be kept within 0.01% accuracy.
Double-pulses and pulse bursts are available. All pulses can be triggered externally when the PLL is turned off. Bursts can also be triggered by the internal PLL if it is not in use as the repetition-rate generator. An external width (pulse recovery) mode is available, too.
The selectable 50/1000 Ohm source resistance allows output amplitudes up to 10 or 20 Vpp respectively into a 50 Ohm load.
Single-channel pulse generator
50 MHz, 10 V from 50 Ohm into 50 Ohm
Triggerable / PLL operation selectable
Pulse / burst modes selectable
Variable transition times
BNC outputs, single-ended
Datasheet -
Digital Multimeter
HP-Agilent/Keysight 3458A
-8 ½ digits with 10 nV DC resolution -8-ppm 1 year dcV accuracy, optional 4-ppm -0.05 ppm dcV transfer accuracy -100,000 readings per second at 4 ½ digits -2- and 4-wire ohms measurements with offset compensation -Superior AC voltage measurements
- DISPONIBILE A STOCK
8½ Digit
-
Multifunction Switch/Measure Unit
HP-Agilent/Keysight 34980A
The Agilent 34980A is a flexible, reliable switching and data acquisition platform with more than 20 modules to help you customize your test system.
Key Features & Specifications:
– Eight-slot mainframe, choice of 21-plug-in modules 34980A Multifunction Switch/Measure Unit Summary
– Built-in DMM with 6½ digits (22 bits) of resolution
– Scan rates of up to 1000 channels/second
– Standard LAN, USB, and GPIB connectivity to PC, LXI compliant
– Easy remote access with built-in Web interface
– Up to 560 2-wire mux or 4096 matrix cross-points in one mainframe -
Module
AGILENT 34903A – 20 Channel Actuator/GP Switch Module for 34970A/34972A
The Agilent 34903A is a general-purpose switch module for the 34970A/34972A Data Acquisition/Switch Unit. It has 20 independent single-pole, double-throw (SPDT) relays and is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. Its 300 V, 1 A contacts can handle up to 50 W, enough for many power line switching applications.
* 20 Channel Actuator/GP Switch
* SPDT (Form C) latching relays
* 300 V, 1 A actuation and control -
Function Generator
HP-Agilent/Keysight 8116A
The fully programmable HP 8116A features pulse as well as function generator capabilities in one small unit. A broad 1 mHz-50 MHz band for all waveforms and a wide choice of operating and modulating modes assure high flexibility. These factors, plus good repeatability, make the HP 8116A a sound, long-term investment.
HP's custom IC's have made it feasible to put the many HP 8116A capabilities into such a small volume. Handling is simplified by a unique, microprocessor-controlled, operating concept which ensures a clear overview of the compact front panel at all times. When the mode and waveform have been selected, illuminated labels show which parameters must be set.
Level or amplitude programming. The HP 8116A's output can be programmed in terms of high and low levels or in terms of amplitude and offset. Consequently a direct, automatic, conversion is always feasible so that the HP 8116A can be programmed in the same terms as the device is specified.
Safe limit. Devices can be protected by the limit feature. This prevents the output from exceeding a given magnitude.
Datasheet -
NOISE SOURCE
HP-AGILENT/KEYSIGHT 346C
HP 346C Noise Source, 10 MHz to 26.5 GHz, nominal ENR 15 dB
The HP 346C noise source is the ideal companion to Keysight's noise figure solutions. Since it is broadband (10 MHz to 26.5 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source reduces a major source of measurement uncertainty; reflections of test signals. Option K01 is a coaxial noise source and features coverage from 1 to 50 GHz with a 2.4 mm coaxial connector.
• Frequency range: 10 MHz to 26.5 GHz
• VSWR: < 1.35:1 • Connectors: BNC (f) input bias / 3.5 mm (m) • Low SWR for reducing noise figure measurement uncertainty • Individually calibrated ENR values at specific frequencies Datasheet -
Pulse Pattern Generator
AGILENT-Hp/Keysight 81101A
The Keysight 81101A 50 MHz single-channel Pulse Generator is the economy, entry-level instrument of the 81100 family. All timing parameters (repetition rate, delay, width and transitions) are variable.
The instrument comprises a PLL oscillator that enables the repetition rate to be kept within 0.01% accuracy.
Double-pulses and pulse bursts are available. All pulses can be triggered externally when the PLL is turned off. Bursts can also be triggered by the internal PLL if it is not in use as the repetition-rate generator. An external width (pulse recovery) mode is available, too.
The selectable 50/1000 Ohm source resistance allows output amplitudes up to 10 or 20 Vpp respectively into a 50 Ohm load.
Single-channel pulse generator
50 MHz, 10 V from 50 Ohm into 50 Ohm
Triggerable / PLL operation selectable
Pulse / burst modes selectable
Variable transition times
BNC outputs, single-ended
Datasheet -
Digital Multimeter
HP-Agilent/Keysight 3458A
-8 ½ digits with 10 nV DC resolution -8-ppm 1 year dcV accuracy, optional 4-ppm -0.05 ppm dcV transfer accuracy -100,000 readings per second at 4 ½ digits -2- and 4-wire ohms measurements with offset compensation -Superior AC voltage measurements
- DISPONIBILE A STOCK
8½ Digit