ItalianoHP-Agilent/Keysight
Showing 361–390 of 455 results
-
Test Set
HP-Agilent/Keysight 85046A
The Agilent 85046A test set provides the capability to simultaneously measure the transmission and reflection characteristics of 50 ohm devices. The test set is controlled from the analyzer and includes programmable step attenuators. It can be used with the Agilent 8753A/B/C, 8753D/E/ES Option 011, 4395, 4396 and selected 8702 lightwave component analyzer configurations. – Provides the capability to measure reflection and transmission characteristics (including S-parameters) of two-port devices in either direction with a single connection. – Includes a programmable step attenuator – Frequency range 300 kHz to 3 GHz – Contains precision 7 mm connectors
SKU: 298 -
Network Analyzer
HP-Agilent/Keysight 8757D CRT
The HP 8757D scalar network analyzer allows you to measure insertion loss, gain, return loss, SWR, and power quickly and accurately . With high-performance detectors and directional bridges, and a companion Keysight source and printer, this analyzer becomes the basis of a complete measurement system with superb performance.
Setup time is reduced by external disk save/recall, and measurement data can be sent directly to a printer while you proceed to the next measurement.
You can configure your system using a Keysight PSG signal generator with ramp sweep capability. The dynamic range can be extended from 75 dB to 83 dB using the PSG's high power option.
The Agilent 8757D has four independent display channels that process the signals from the Agilent 85037 series precision detectors, 85025 and 85026 detectors, and the 85027 series directional bridges for logarithmic display, in single channel or ratio mode. Three (optionally four) detector inputs are provided.
The number of points (horizontal resolution) that can be selected depends on the number of traces displayed.
A display is considered faulty if:
• A complete row or column of “stuck” or “dark” pixels.
• More than six “stuck on” pixels (but not more than three green) or more than 0.002% of the total pixels are within the LCD specifications.
• More than twelve “dark” pixels (but no more than seven of the same color) or more than 0.004% of the total pixels are within the LCD specifications.
• Two or more consecutive “stuck on” pixels or three or more consecutive “dark” pixel (but no more than one set of two consecutive dark pixels) “Stuck on” of “dark” pixels less than 6.5 mm apart (excluding consecutive pixels.All analyzer display channels can display any one of the detector inputs or any ratio combination of detector inputs.
Log magnitude >
dBm: single channel power measurement
dB: relative power measurement (ratio or relative to trace memory)SWR > Relative measurements (normalized or ratio measurements) can be displayed in SWR. Channels 1 and 2 only: 401 points or fewer
AUX voltage > The rear panel BNC input ADC IN can be measured and displayed in volts (–10 to +10 volts). Typical maximum error is 60 mV.
Up to 8 operator-selectable colors are available for LCD attributes, such as the grid, measurement traces, and labels.
The minimum sweep time depends on the number of traces displayed and the number of points selected.
Traces are stored and normalized with the highest resolution, independent of display scale/division or offset. With adaptive normalization on the Agilent 8757D, calibration data is interpolated when the frequency span is decreased.
Key Features & SpecificationsUp to 83 dB dynamic range
Buffered plotter/printer output
Built-in limit testing for quick pass/fail decisions
External disc and internal register save/recall of test setups
Color display
Optional internal power meter calibrator and precision detectors provide near power meter accuracy
DISLPAY CRT
Four display channels
Three detector inputs
+16 to –60 dBm dynamic range
AC/DC detection modes
101 to 1601 measurement points/trace
Compatible with the Agilent 85025 and 85026 series detectors and the Agilent 85027 series directional bridges
Limit line testing (channels 1 and 2)
Adaptive normalization
Cursor search functions (max, min, n dB, BW)SKU: 69 -
Power Supply
HP-Agilent/Keysight E3610A
Agilent basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 30W, single output E3610A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C) – Range 1: 0 to 8 V, 0 to 3 A – Range 2: 0 to 15 V, 0 to 2 A – Power (max): 30 W Ripple & Noise from 20 Hz to 20 MHz – Voltage rms: 200 µV – Peak-to-Peak: 2 mV Load & Line Regulation – 0.01% + 2 mV Meter Resolution – Voltage: 10 mV – Current: 10 mA
SKU: 800 -
Plug-in
HP/Agilent-Keysight 83592C
The HP 83592C RF plug-in provides a 10 MHz to 20 GHz broadband coaxial swept frequency source for the Keysight 8350B sweep oscillator mainframe. Applications include scalar network analysis, serving as a local oscillator for down-converting high frequency signals, and a stand-alone RF signal source.
High output power
Excellent harmonic performance
Low cost of ownership
HP FILTER
HP MULTIPLIER
HP OSCILLATOR
DatasheetSKU: n/a -
Signal Generator
HP-Agilent/Keysight 8656A
100 kHz to 990 MHz Synthesized Signal Generator
The 8656A is a programmable synthesized signal generator that combines performance, quality, and economy, covering the 100 kHz to 990 MHz frequency range.
Offering 1 dB level accuracy and 0.1 dB resolution with calibrated output levels over the +13 to -127 dBm range, the 8656A provides precise output control.
In addition, its modulation capabilities include simultaneous and mixed modulation modes from internal (400 Hz and 1 KHz tones) and external sources.
DatasheetSKU: n/a -
Spectrum Analyzer
HP-Agilent/Keysight E4401B
The ESA-E Series is Agilent's mid-performance spectrum analyzer solution for the future. The series sets the performance standards in measurement speed, dynamic range, accuracy, and resolving power for similarly priced products. Its flexible platform design enables R&D, manufacturing, and field service engineers to customize the product to meet specific testing needs and to upgrade the product with new features when required.
The products' selection of one button measurement solutions combined with its easily navigable user interface and performance in speed allows engineers to spend less time testing and more time designing, building, and trouble shooting components and products.
Features
Frequency Range: 1 MHz to 1.5 GH
Remotely view and control the ESA over the Internet
8590-Series Programming Code Compatibility
Multiformat RF power measurement suite
Free IntuiLink PC software for screen and data transfer
Fault Location, Phase Noise, and CATV Service measurement personalities
Rugged and portable for lab grade performance in the field
Segmented sweep for up to 32 discontinuous spans in one sweep
One-millisecond RF sweep time, 50 measurements per second
Rugged lab grade performance for the field
±1 dB overall amplitude accuracy
Optional 10 Hz digital resolution bandwidth filter and preamplifier
-154 dBm sensitivity with preamp, +13.5 dBm TOI
Variable sweep (trace points) from 2 to 8192
DatasheetSKU: 87
-
Test Set
HP-Agilent/Keysight 85046A
The Agilent 85046A test set provides the capability to simultaneously measure the transmission and reflection characteristics of 50 ohm devices. The test set is controlled from the analyzer and includes programmable step attenuators. It can be used with the Agilent 8753A/B/C, 8753D/E/ES Option 011, 4395, 4396 and selected 8702 lightwave component analyzer configurations. – Provides the capability to measure reflection and transmission characteristics (including S-parameters) of two-port devices in either direction with a single connection. – Includes a programmable step attenuator – Frequency range 300 kHz to 3 GHz – Contains precision 7 mm connectors
-
Network Analyzer
HP-Agilent/Keysight 8757D CRT
The HP 8757D scalar network analyzer allows you to measure insertion loss, gain, return loss, SWR, and power quickly and accurately . With high-performance detectors and directional bridges, and a companion Keysight source and printer, this analyzer becomes the basis of a complete measurement system with superb performance.
Setup time is reduced by external disk save/recall, and measurement data can be sent directly to a printer while you proceed to the next measurement.
You can configure your system using a Keysight PSG signal generator with ramp sweep capability. The dynamic range can be extended from 75 dB to 83 dB using the PSG's high power option.
The Agilent 8757D has four independent display channels that process the signals from the Agilent 85037 series precision detectors, 85025 and 85026 detectors, and the 85027 series directional bridges for logarithmic display, in single channel or ratio mode. Three (optionally four) detector inputs are provided.
The number of points (horizontal resolution) that can be selected depends on the number of traces displayed.
A display is considered faulty if:
• A complete row or column of “stuck” or “dark” pixels.
• More than six “stuck on” pixels (but not more than three green) or more than 0.002% of the total pixels are within the LCD specifications.
• More than twelve “dark” pixels (but no more than seven of the same color) or more than 0.004% of the total pixels are within the LCD specifications.
• Two or more consecutive “stuck on” pixels or three or more consecutive “dark” pixel (but no more than one set of two consecutive dark pixels) “Stuck on” of “dark” pixels less than 6.5 mm apart (excluding consecutive pixels.All analyzer display channels can display any one of the detector inputs or any ratio combination of detector inputs.
Log magnitude >
dBm: single channel power measurement
dB: relative power measurement (ratio or relative to trace memory)SWR > Relative measurements (normalized or ratio measurements) can be displayed in SWR. Channels 1 and 2 only: 401 points or fewer
AUX voltage > The rear panel BNC input ADC IN can be measured and displayed in volts (–10 to +10 volts). Typical maximum error is 60 mV.
Up to 8 operator-selectable colors are available for LCD attributes, such as the grid, measurement traces, and labels.
The minimum sweep time depends on the number of traces displayed and the number of points selected.
Traces are stored and normalized with the highest resolution, independent of display scale/division or offset. With adaptive normalization on the Agilent 8757D, calibration data is interpolated when the frequency span is decreased.
Key Features & SpecificationsUp to 83 dB dynamic range
Buffered plotter/printer output
Built-in limit testing for quick pass/fail decisions
External disc and internal register save/recall of test setups
Color display
Optional internal power meter calibrator and precision detectors provide near power meter accuracy
DISLPAY CRT
Four display channels
Three detector inputs
+16 to –60 dBm dynamic range
AC/DC detection modes
101 to 1601 measurement points/trace
Compatible with the Agilent 85025 and 85026 series detectors and the Agilent 85027 series directional bridges
Limit line testing (channels 1 and 2)
Adaptive normalization
Cursor search functions (max, min, n dB, BW) -
Power Supply
HP-Agilent/Keysight E3610A
Agilent basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 30W, single output E3610A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C) – Range 1: 0 to 8 V, 0 to 3 A – Range 2: 0 to 15 V, 0 to 2 A – Power (max): 30 W Ripple & Noise from 20 Hz to 20 MHz – Voltage rms: 200 µV – Peak-to-Peak: 2 mV Load & Line Regulation – 0.01% + 2 mV Meter Resolution – Voltage: 10 mV – Current: 10 mA
-
Plug-in
HP/Agilent-Keysight 83592C
The HP 83592C RF plug-in provides a 10 MHz to 20 GHz broadband coaxial swept frequency source for the Keysight 8350B sweep oscillator mainframe. Applications include scalar network analysis, serving as a local oscillator for down-converting high frequency signals, and a stand-alone RF signal source.
High output power
Excellent harmonic performance
Low cost of ownership
HP FILTER
HP MULTIPLIER
HP OSCILLATOR
Datasheet -
Signal Generator
HP-Agilent/Keysight 8656A
100 kHz to 990 MHz Synthesized Signal Generator
The 8656A is a programmable synthesized signal generator that combines performance, quality, and economy, covering the 100 kHz to 990 MHz frequency range.
Offering 1 dB level accuracy and 0.1 dB resolution with calibrated output levels over the +13 to -127 dBm range, the 8656A provides precise output control.
In addition, its modulation capabilities include simultaneous and mixed modulation modes from internal (400 Hz and 1 KHz tones) and external sources.
Datasheet -
Spectrum Analyzer
HP-Agilent/Keysight E4401B
The ESA-E Series is Agilent's mid-performance spectrum analyzer solution for the future. The series sets the performance standards in measurement speed, dynamic range, accuracy, and resolving power for similarly priced products. Its flexible platform design enables R&D, manufacturing, and field service engineers to customize the product to meet specific testing needs and to upgrade the product with new features when required.
The products' selection of one button measurement solutions combined with its easily navigable user interface and performance in speed allows engineers to spend less time testing and more time designing, building, and trouble shooting components and products.
Features
Frequency Range: 1 MHz to 1.5 GH
Remotely view and control the ESA over the Internet
8590-Series Programming Code Compatibility
Multiformat RF power measurement suite
Free IntuiLink PC software for screen and data transfer
Fault Location, Phase Noise, and CATV Service measurement personalities
Rugged and portable for lab grade performance in the field
Segmented sweep for up to 32 discontinuous spans in one sweep
One-millisecond RF sweep time, 50 measurements per second
Rugged lab grade performance for the field
±1 dB overall amplitude accuracy
Optional 10 Hz digital resolution bandwidth filter and preamplifier
-154 dBm sensitivity with preamp, +13.5 dBm TOI
Variable sweep (trace points) from 2 to 8192
Datasheet
-
Test Set
HP-Agilent/Keysight 85046A
The Agilent 85046A test set provides the capability to simultaneously measure the transmission and reflection characteristics of 50 ohm devices. The test set is controlled from the analyzer and includes programmable step attenuators. It can be used with the Agilent 8753A/B/C, 8753D/E/ES Option 011, 4395, 4396 and selected 8702 lightwave component analyzer configurations. – Provides the capability to measure reflection and transmission characteristics (including S-parameters) of two-port devices in either direction with a single connection. – Includes a programmable step attenuator – Frequency range 300 kHz to 3 GHz – Contains precision 7 mm connectors
-
Network Analyzer
HP-Agilent/Keysight 8757D CRT
The HP 8757D scalar network analyzer allows you to measure insertion loss, gain, return loss, SWR, and power quickly and accurately . With high-performance detectors and directional bridges, and a companion Keysight source and printer, this analyzer becomes the basis of a complete measurement system with superb performance.
Setup time is reduced by external disk save/recall, and measurement data can be sent directly to a printer while you proceed to the next measurement.
You can configure your system using a Keysight PSG signal generator with ramp sweep capability. The dynamic range can be extended from 75 dB to 83 dB using the PSG's high power option.
The Agilent 8757D has four independent display channels that process the signals from the Agilent 85037 series precision detectors, 85025 and 85026 detectors, and the 85027 series directional bridges for logarithmic display, in single channel or ratio mode. Three (optionally four) detector inputs are provided.
The number of points (horizontal resolution) that can be selected depends on the number of traces displayed.
A display is considered faulty if:
• A complete row or column of “stuck” or “dark” pixels.
• More than six “stuck on” pixels (but not more than three green) or more than 0.002% of the total pixels are within the LCD specifications.
• More than twelve “dark” pixels (but no more than seven of the same color) or more than 0.004% of the total pixels are within the LCD specifications.
• Two or more consecutive “stuck on” pixels or three or more consecutive “dark” pixel (but no more than one set of two consecutive dark pixels) “Stuck on” of “dark” pixels less than 6.5 mm apart (excluding consecutive pixels.All analyzer display channels can display any one of the detector inputs or any ratio combination of detector inputs.
Log magnitude >
dBm: single channel power measurement
dB: relative power measurement (ratio or relative to trace memory)SWR > Relative measurements (normalized or ratio measurements) can be displayed in SWR. Channels 1 and 2 only: 401 points or fewer
AUX voltage > The rear panel BNC input ADC IN can be measured and displayed in volts (–10 to +10 volts). Typical maximum error is 60 mV.
Up to 8 operator-selectable colors are available for LCD attributes, such as the grid, measurement traces, and labels.
The minimum sweep time depends on the number of traces displayed and the number of points selected.
Traces are stored and normalized with the highest resolution, independent of display scale/division or offset. With adaptive normalization on the Agilent 8757D, calibration data is interpolated when the frequency span is decreased.
Key Features & SpecificationsUp to 83 dB dynamic range
Buffered plotter/printer output
Built-in limit testing for quick pass/fail decisions
External disc and internal register save/recall of test setups
Color display
Optional internal power meter calibrator and precision detectors provide near power meter accuracy
DISLPAY CRT
Four display channels
Three detector inputs
+16 to –60 dBm dynamic range
AC/DC detection modes
101 to 1601 measurement points/trace
Compatible with the Agilent 85025 and 85026 series detectors and the Agilent 85027 series directional bridges
Limit line testing (channels 1 and 2)
Adaptive normalization
Cursor search functions (max, min, n dB, BW) -
Power Supply
HP-Agilent/Keysight E3610A
Agilent basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 30W, single output E3610A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C) – Range 1: 0 to 8 V, 0 to 3 A – Range 2: 0 to 15 V, 0 to 2 A – Power (max): 30 W Ripple & Noise from 20 Hz to 20 MHz – Voltage rms: 200 µV – Peak-to-Peak: 2 mV Load & Line Regulation – 0.01% + 2 mV Meter Resolution – Voltage: 10 mV – Current: 10 mA
-
Plug-in
HP/Agilent-Keysight 83592C
The HP 83592C RF plug-in provides a 10 MHz to 20 GHz broadband coaxial swept frequency source for the Keysight 8350B sweep oscillator mainframe. Applications include scalar network analysis, serving as a local oscillator for down-converting high frequency signals, and a stand-alone RF signal source.
High output power
Excellent harmonic performance
Low cost of ownership
HP FILTER
HP MULTIPLIER
HP OSCILLATOR
Datasheet -
Signal Generator
HP-Agilent/Keysight 8656A
100 kHz to 990 MHz Synthesized Signal Generator
The 8656A is a programmable synthesized signal generator that combines performance, quality, and economy, covering the 100 kHz to 990 MHz frequency range.
Offering 1 dB level accuracy and 0.1 dB resolution with calibrated output levels over the +13 to -127 dBm range, the 8656A provides precise output control.
In addition, its modulation capabilities include simultaneous and mixed modulation modes from internal (400 Hz and 1 KHz tones) and external sources.
Datasheet -
Spectrum Analyzer
HP-Agilent/Keysight E4401B
The ESA-E Series is Agilent's mid-performance spectrum analyzer solution for the future. The series sets the performance standards in measurement speed, dynamic range, accuracy, and resolving power for similarly priced products. Its flexible platform design enables R&D, manufacturing, and field service engineers to customize the product to meet specific testing needs and to upgrade the product with new features when required.
The products' selection of one button measurement solutions combined with its easily navigable user interface and performance in speed allows engineers to spend less time testing and more time designing, building, and trouble shooting components and products.
Features
Frequency Range: 1 MHz to 1.5 GH
Remotely view and control the ESA over the Internet
8590-Series Programming Code Compatibility
Multiformat RF power measurement suite
Free IntuiLink PC software for screen and data transfer
Fault Location, Phase Noise, and CATV Service measurement personalities
Rugged and portable for lab grade performance in the field
Segmented sweep for up to 32 discontinuous spans in one sweep
One-millisecond RF sweep time, 50 measurements per second
Rugged lab grade performance for the field
±1 dB overall amplitude accuracy
Optional 10 Hz digital resolution bandwidth filter and preamplifier
-154 dBm sensitivity with preamp, +13.5 dBm TOI
Variable sweep (trace points) from 2 to 8192
Datasheet