ItalianoHP-Agilent/Keysight
Showing 331–360 of 455 results
-
Date Acquisition/Switch Unit
AGILENT-Hp/Keysight 34970A
The Agilent 34970A data acquisition / data logger switch consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
* 3-slot mainframe with built-in GPIB and RS232 interfaces
* 6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
* 8 switch and control plug-in modules to choose from
* Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
* 50k readings of non-volatile memory holds data when power is removed
* Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
* A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequencesSKU: 1118 -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mASKU: n/a -
Power Supply
AGILENT-Hp/Keysight 6644A
Output Ratings
Output voltage: 0 to 60 V
Output current (40° C): 0 to 3.5 A
Maximum current (50° C/55° C): 3.2 A/3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 4.1 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 500 µV
Voltage peak-to-peak: 5 mV
Current rms: 1.5 mAKeysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The Keysight 210W, GPIB, single output 6644A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
DatasheetSKU: 1166 -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers
SKU: 388 -
Network Analyzer
HP/Agilent-Keysight 8753D
The HP 8753D is a vector network analyzer and it offers even more flexibility and measurement capability than the HP 8752C in the following areas:
* Frequency range from 30 kHz to 3 GHz.
* Built-in S-parameter test set provides complete forward and reverse measurements, allowing you to completely characterize your component with a single connection.
* 50 and 75 ohm solutions.
* Superb accuracy. The most comprehensive calibration available guarantees accurate measurements. TRL**nRMt makes calibration in non-coaxial environments easier and more convenient.
* Mixer testing. Quickly and easily characterize frequency translating devices such as mixers.
* Add swept harmonic measurements. Characterize amplifter parameters – gain, 1 dB compression, match – and 2nd and 3rd harmonic distortion with the same test setup.
* Built-in 3.5 inch floppy disk drive provides convenient storage of instrument states and data.
* Parallel and serial ports provide interfaces to popular printers and plotters. The parallel port can also be used as a general U0 bus, with user-controllable TI'L inputs and outputs. Users can also connect a DIN keyboard to speed up entry of titles, labels, or file names, and for remote hnt panel operation.Two excellent choices, the HP 8752C and HP 8753D continue the tradition of affordable excellence in RF component measurements for the lab and production test areas. The HP 8752C and HP 8753D network analyzers bring superior performance and useful productivity features to simplify and speed your device, component, or network measurements in the 30 kHz to 6 GHz frequency range. A swept synthesized source, sensitive receiver, and crisp color display ensure rapid, accurate, and easy-to-read test results. Since the HP 8752C and HP 8753D are vector network analyzers, they not only provide magnitude and phase information, but also offer up to 1 10 dB dynamic range, make group delay and time domain measurements, and utilize vector accuracy enhancement to minimize measurement uncertainty.
DatasheetSKU: n/a -
USB/GPIB Interface High-Speed USB 2.0
AGILENT-Hp/Keysight 82357B
The Agilent 82357B USB/GPIB Interface provides a direct connection from a USB port on your laptop or desktop PC to GPIB instruments. There are no switches to set, no PC cards to install, and no external power supplies required. Getting connected has never been easier.
Easy connection – plug-and-play interface
USB 2.0 interface (USB 1.1 compatible) and IEEE-488 interface (connect up to 14 GPIB instruments)
High-speed – transfer over 1.15MB/sec
Parallel Polling (check response of up to 8 devices at one single poll)
Standard industry libraries with Keysight IO Libraries SuiteSKU: n/a -
Spectrum Analyzer
HP-Agilent/Keysight 8594E
The HP Agilent 8594E is Spectrum Analyzers with a bandwidth of 9 kHz to 2.9 GHz. Product Specs: Four slot cardcage Split screen display One-button measurement routines Advanced measurement functions Dual interfaces Built-in tracking generator (Optional) Perform complex tests simply and quickly with measurement personalities that support applications like cable TV/broadcast, component test, electromagnetic compatibility, lightwave, and wireless communications
9 kHz to 2.9 GHz.SKU: 21 -
Attenuator
HUBER SUHNER 6803.01.A + HUBER SUHNER 6806.01.A
HUBER+SUHNER 6803.01.A
RF Attenuator 50 Ω, 4 GHz, 3 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (femaleHUBER+SUHNER 6806.01.A
RF Attenuator 50 Ω, 4 GHz, 6 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (female)
Datasheet 6806.01.A
Datasheet 6803.01.ASKU: n/a
-
Date Acquisition/Switch Unit
AGILENT-Hp/Keysight 34970A
The Agilent 34970A data acquisition / data logger switch consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
* 3-slot mainframe with built-in GPIB and RS232 interfaces
* 6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
* 8 switch and control plug-in modules to choose from
* Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
* 50k readings of non-volatile memory holds data when power is removed
* Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
* A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mA -
Power Supply
AGILENT-Hp/Keysight 6644A
Output Ratings
Output voltage: 0 to 60 V
Output current (40° C): 0 to 3.5 A
Maximum current (50° C/55° C): 3.2 A/3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 4.1 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 500 µV
Voltage peak-to-peak: 5 mV
Current rms: 1.5 mAKeysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The Keysight 210W, GPIB, single output 6644A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
Datasheet -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers
-
Network Analyzer
HP/Agilent-Keysight 8753D
The HP 8753D is a vector network analyzer and it offers even more flexibility and measurement capability than the HP 8752C in the following areas:
* Frequency range from 30 kHz to 3 GHz.
* Built-in S-parameter test set provides complete forward and reverse measurements, allowing you to completely characterize your component with a single connection.
* 50 and 75 ohm solutions.
* Superb accuracy. The most comprehensive calibration available guarantees accurate measurements. TRL**nRMt makes calibration in non-coaxial environments easier and more convenient.
* Mixer testing. Quickly and easily characterize frequency translating devices such as mixers.
* Add swept harmonic measurements. Characterize amplifter parameters – gain, 1 dB compression, match – and 2nd and 3rd harmonic distortion with the same test setup.
* Built-in 3.5 inch floppy disk drive provides convenient storage of instrument states and data.
* Parallel and serial ports provide interfaces to popular printers and plotters. The parallel port can also be used as a general U0 bus, with user-controllable TI'L inputs and outputs. Users can also connect a DIN keyboard to speed up entry of titles, labels, or file names, and for remote hnt panel operation.Two excellent choices, the HP 8752C and HP 8753D continue the tradition of affordable excellence in RF component measurements for the lab and production test areas. The HP 8752C and HP 8753D network analyzers bring superior performance and useful productivity features to simplify and speed your device, component, or network measurements in the 30 kHz to 6 GHz frequency range. A swept synthesized source, sensitive receiver, and crisp color display ensure rapid, accurate, and easy-to-read test results. Since the HP 8752C and HP 8753D are vector network analyzers, they not only provide magnitude and phase information, but also offer up to 1 10 dB dynamic range, make group delay and time domain measurements, and utilize vector accuracy enhancement to minimize measurement uncertainty.
Datasheet -
USB/GPIB Interface High-Speed USB 2.0
AGILENT-Hp/Keysight 82357B
The Agilent 82357B USB/GPIB Interface provides a direct connection from a USB port on your laptop or desktop PC to GPIB instruments. There are no switches to set, no PC cards to install, and no external power supplies required. Getting connected has never been easier.
Easy connection – plug-and-play interface
USB 2.0 interface (USB 1.1 compatible) and IEEE-488 interface (connect up to 14 GPIB instruments)
High-speed – transfer over 1.15MB/sec
Parallel Polling (check response of up to 8 devices at one single poll)
Standard industry libraries with Keysight IO Libraries Suite -
Spectrum Analyzer
HP-Agilent/Keysight 8594E
The HP Agilent 8594E is Spectrum Analyzers with a bandwidth of 9 kHz to 2.9 GHz. Product Specs: Four slot cardcage Split screen display One-button measurement routines Advanced measurement functions Dual interfaces Built-in tracking generator (Optional) Perform complex tests simply and quickly with measurement personalities that support applications like cable TV/broadcast, component test, electromagnetic compatibility, lightwave, and wireless communications
9 kHz to 2.9 GHz. -
Attenuator
HUBER SUHNER 6803.01.A + HUBER SUHNER 6806.01.A
HUBER+SUHNER 6803.01.A
RF Attenuator 50 Ω, 4 GHz, 3 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (femaleHUBER+SUHNER 6806.01.A
RF Attenuator 50 Ω, 4 GHz, 6 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (female)
Datasheet 6806.01.A
Datasheet 6803.01.A
-
Date Acquisition/Switch Unit
AGILENT-Hp/Keysight 34970A
The Agilent 34970A data acquisition / data logger switch consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
* 3-slot mainframe with built-in GPIB and RS232 interfaces
* 6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
* 8 switch and control plug-in modules to choose from
* Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
* 50k readings of non-volatile memory holds data when power is removed
* Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
* A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mA -
Power Supply
AGILENT-Hp/Keysight 6644A
Output Ratings
Output voltage: 0 to 60 V
Output current (40° C): 0 to 3.5 A
Maximum current (50° C/55° C): 3.2 A/3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 4.1 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 500 µV
Voltage peak-to-peak: 5 mV
Current rms: 1.5 mAKeysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The Keysight 210W, GPIB, single output 6644A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
Datasheet -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers
-
Network Analyzer
HP/Agilent-Keysight 8753D
The HP 8753D is a vector network analyzer and it offers even more flexibility and measurement capability than the HP 8752C in the following areas:
* Frequency range from 30 kHz to 3 GHz.
* Built-in S-parameter test set provides complete forward and reverse measurements, allowing you to completely characterize your component with a single connection.
* 50 and 75 ohm solutions.
* Superb accuracy. The most comprehensive calibration available guarantees accurate measurements. TRL**nRMt makes calibration in non-coaxial environments easier and more convenient.
* Mixer testing. Quickly and easily characterize frequency translating devices such as mixers.
* Add swept harmonic measurements. Characterize amplifter parameters – gain, 1 dB compression, match – and 2nd and 3rd harmonic distortion with the same test setup.
* Built-in 3.5 inch floppy disk drive provides convenient storage of instrument states and data.
* Parallel and serial ports provide interfaces to popular printers and plotters. The parallel port can also be used as a general U0 bus, with user-controllable TI'L inputs and outputs. Users can also connect a DIN keyboard to speed up entry of titles, labels, or file names, and for remote hnt panel operation.Two excellent choices, the HP 8752C and HP 8753D continue the tradition of affordable excellence in RF component measurements for the lab and production test areas. The HP 8752C and HP 8753D network analyzers bring superior performance and useful productivity features to simplify and speed your device, component, or network measurements in the 30 kHz to 6 GHz frequency range. A swept synthesized source, sensitive receiver, and crisp color display ensure rapid, accurate, and easy-to-read test results. Since the HP 8752C and HP 8753D are vector network analyzers, they not only provide magnitude and phase information, but also offer up to 1 10 dB dynamic range, make group delay and time domain measurements, and utilize vector accuracy enhancement to minimize measurement uncertainty.
Datasheet -
USB/GPIB Interface High-Speed USB 2.0
AGILENT-Hp/Keysight 82357B
The Agilent 82357B USB/GPIB Interface provides a direct connection from a USB port on your laptop or desktop PC to GPIB instruments. There are no switches to set, no PC cards to install, and no external power supplies required. Getting connected has never been easier.
Easy connection – plug-and-play interface
USB 2.0 interface (USB 1.1 compatible) and IEEE-488 interface (connect up to 14 GPIB instruments)
High-speed – transfer over 1.15MB/sec
Parallel Polling (check response of up to 8 devices at one single poll)
Standard industry libraries with Keysight IO Libraries Suite -
Spectrum Analyzer
HP-Agilent/Keysight 8594E
The HP Agilent 8594E is Spectrum Analyzers with a bandwidth of 9 kHz to 2.9 GHz. Product Specs: Four slot cardcage Split screen display One-button measurement routines Advanced measurement functions Dual interfaces Built-in tracking generator (Optional) Perform complex tests simply and quickly with measurement personalities that support applications like cable TV/broadcast, component test, electromagnetic compatibility, lightwave, and wireless communications
9 kHz to 2.9 GHz. -
Attenuator
HUBER SUHNER 6803.01.A + HUBER SUHNER 6806.01.A
HUBER+SUHNER 6803.01.A
RF Attenuator 50 Ω, 4 GHz, 3 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (femaleHUBER+SUHNER 6806.01.A
RF Attenuator 50 Ω, 4 GHz, 6 dB
Connectors (side 1 / side 2) BNC plug (male) / BNC jack (female)
Datasheet 6806.01.A
Datasheet 6803.01.A