ItalianoHP-Agilent/Keysight
Showing 271–300 of 455 results
-
Power Supply
AGILENT-Hp/Keysight E3646A
The Agilent E3646A 60-watt dual-output programmable power supply features built-in GPIB and RS-232 connectivity and SCPI language compatibility making it easy to create flexible power programs. For general-purpose use, this programmable power supply offers the performance of a system power supply at a surprisingly affordable price.
E364X: Basic System Power
The Agilent E3640A – E3649A power supplies fill the gap between manual bench power supplies and high performance system supplies, offering unmatched performance and functionality at a great price. They’re designed for moderate-speed test where automation is important and throughput is not critical. These single- and dual-output, dual range power supplies are ideal for contract manufacturers and OEMs who need to perform basic electronic functional tests on a variety of products quickly and economically.All models support GPIB and RS-232 for quick connectivity. SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. Less than 90 ms output settling time keeps throughput high without the need for a down programmer. Up to five store/recall states help minimize programming time while accelerating test. Remote sensing capability ensures output stability with longer leads.
Great Performance, Outstanding Price
With 30 to 100W of output power, the Agilent E364xA-series of programmable dc power supplies provides great performance at a great price. All ten models deliver clean power, dependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They’re designed to meet the needs of R&D design verification, production testing, QA verifications and other demanding applications with Agilent Technologies’ quality and reliability.Steady Output
With 0.01 percent load and line regulation, Agilent E364xA power supplies keep output steady when power line and load changes occur. They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Agilent E364xA power supplies specify less than 90 msec of voltage settling time at any output load condition.Remote Interface
Agilent E364xA power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232. Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well.Broad Support
VXIplug&play software drivers are available for Agilent VEE and National Instruments LabView™ and LabWindows™, simplifying integration of the E364xA into your test system. The drivers are supported under Microsoft® Windows 98 ® and NT. ®Front Panel Operation
An easy-to-use rotary knob and self-guiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of 10 mV/1 mA from the front panel. Up to five complete powers supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously.
DatasheetSKU: 895 -
Power Sensor
HP-Agilent/Keysight 8485D
The 8485D diode power sensor measures average power over the frequency range 50 MHz to 26.5 GHz and power range -70 to -20 dBm (50 dB dynamic range).
Excellent SWR for reducing mismatch uncertainty
Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
Accurate average power measurements over -70 to -20 dBm
Frequency range 50 MHz to 26.5 GHz
Diode power sensing element
DatasheetSKU: 1062 -
Power Sensor
AGILENT – Hp/Keysight 8487A
HP AGILENT KEYSIGHT 8487A POWER SENSOR 50 MHz to 50 GHz
The 8487A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM series, EPM-P series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters. The 8487A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 50 MHz to 50 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -30 dBm to +20 dBm)
• 50 ohm impedance
• 2.4 mm(m) connector
Scheda TecnicaSKU: n/a -
Power Supply
AGILENT-Hp/Keysight E3631A
The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package.
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 A
Programming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms Readback Accuracy at 25°C ±5° 1200W, DC System Power Supplies,60V - 50A. DatasheetSKU: n/a -
Oscillator
HP-Agilent/Keysight 8350B
Sweep generator mainframe
Hewlett Packard 8350B Sweep Oscillator Mainframe, Refurbished Versatile microprocessor-controlled mainframe Single-band, straddle-band and broad band plug-ins Accurate, high resolution, digital displays Five marker with marker D and marker sweep Save/recall 9 complete front panel states 10 mV output power to 26.5 GHz Total HP-IB programmability Compatible with HP Network Analyzers Accepts all HP 83500 series plug-ins Options: 400 – 400 Hz Power Line Frequency Operation 803 – HP 5343A Interface Cables 850 – HP 8410C Source Control Cables 908 – Rack Mount Kit 910 – Rack Flange Kit for Instruments with Front Handles Ordering InformationSKU: 39 -
PEAK POWER SENSOR
HP 8991A Peak Power Meter
The HP 8991A peak power analyzer provides complete and accurate characterization of today's complex pulsed signals. It is capable of performing seven automatic timing measurements (rise time, fall time, pulse width, PRI, PRF, duty cycle, and delay) and five automatic power measurement (peak power, average power, pulse top/base amplitude, and overshoot) with push-button ease. Front-panel operation is intuitive and straightforward. Data entries can be typed in or made with the front panel knob; automatic measurements are made with simple keystroke. The 8990A offers two sensor channels plus two external triggering/oscilloscope channels, allowing the simultaneous measurement of modulating signals and detector power envelopes.
* Amplitude and time markers for measuring power exactly where its needed
* Two oscilloscope channels for measuring time delay between video and microwave pulse
* Versatile triggering enables the capturing of exclusive glitches
* Waveform math functions for measuring scalar pulse parameters
* Dynamic Range: >45 dB
* Minimum Pulse Width: 20 ns
* Rise Time: <5 ns * Sensor and Video Inputs: 1 and 4; 2 and 3SKU: n/a -
Power Supply
HP-Agilent/Keysight E3620A
50W Dual Output Power Supply, Two 25V, 1A
Keysight basic DC power supplies offer essential features for a tight budget.
The multiple output, 35-50 W, E3620A and E3630A provide dual and triple outputs; small, compact size for bench use; low-noise and excellent regulation; and overload indicator to monitor output.
The Keysight 50W, dual output E3620A has two clean, reliable outputs for general purpose application; and is compact, affordable for versatile benchtop testing.Output ratings (Maximum current is derated 3.3% per °C from 40°C to 55°C)
> Output 1: 0 to 25 V, 0 to 1 A
> Output 2: 0 to 25 V, 0 to 1 A
> Power (max): 50 WRipple & noise from 20 Hz to 20 MHz
> Normal Mode Voltage rms: 350 µV
> Peak-to-Peak: 1.5 mVLoad & line regulation
> 0.01% + 2mVMeter resolution
> Voltage: 10 mV (0-20 V), 100 mV, (>20 V)
> Current: 1 mASKU: 1102 -
Power Sensor
HP-Agilent/Keysight R8486D
The R8486D diode waveguide power sensor measures average power over the frequency range 26.5 GHz to 40 GHz and power range -70 to -20 dBm (50 dB dynamic range).
Excellent SWR for reducing mismatch uncertainty
50 MHz calibration port
Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
Accurate average power measurements over -70 to -20 dBm
Frequency range 26.5 GHz to 40 GHz
Diode power sensing elementThe Keysight 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
DatasheetSKU: n/a
-
Power Supply
AGILENT-Hp/Keysight E3646A
The Agilent E3646A 60-watt dual-output programmable power supply features built-in GPIB and RS-232 connectivity and SCPI language compatibility making it easy to create flexible power programs. For general-purpose use, this programmable power supply offers the performance of a system power supply at a surprisingly affordable price.
E364X: Basic System Power
The Agilent E3640A – E3649A power supplies fill the gap between manual bench power supplies and high performance system supplies, offering unmatched performance and functionality at a great price. They’re designed for moderate-speed test where automation is important and throughput is not critical. These single- and dual-output, dual range power supplies are ideal for contract manufacturers and OEMs who need to perform basic electronic functional tests on a variety of products quickly and economically.All models support GPIB and RS-232 for quick connectivity. SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. Less than 90 ms output settling time keeps throughput high without the need for a down programmer. Up to five store/recall states help minimize programming time while accelerating test. Remote sensing capability ensures output stability with longer leads.
Great Performance, Outstanding Price
With 30 to 100W of output power, the Agilent E364xA-series of programmable dc power supplies provides great performance at a great price. All ten models deliver clean power, dependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They’re designed to meet the needs of R&D design verification, production testing, QA verifications and other demanding applications with Agilent Technologies’ quality and reliability.Steady Output
With 0.01 percent load and line regulation, Agilent E364xA power supplies keep output steady when power line and load changes occur. They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Agilent E364xA power supplies specify less than 90 msec of voltage settling time at any output load condition.Remote Interface
Agilent E364xA power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232. Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well.Broad Support
VXIplug&play software drivers are available for Agilent VEE and National Instruments LabView™ and LabWindows™, simplifying integration of the E364xA into your test system. The drivers are supported under Microsoft® Windows 98 ® and NT. ®Front Panel Operation
An easy-to-use rotary knob and self-guiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of 10 mV/1 mA from the front panel. Up to five complete powers supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously.
Datasheet -
Power Sensor
HP-Agilent/Keysight 8485D
The 8485D diode power sensor measures average power over the frequency range 50 MHz to 26.5 GHz and power range -70 to -20 dBm (50 dB dynamic range).
Excellent SWR for reducing mismatch uncertainty
Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
Accurate average power measurements over -70 to -20 dBm
Frequency range 50 MHz to 26.5 GHz
Diode power sensing element
Datasheet -
Power Sensor
AGILENT – Hp/Keysight 8487A
HP AGILENT KEYSIGHT 8487A POWER SENSOR 50 MHz to 50 GHz
The 8487A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM series, EPM-P series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters. The 8487A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 50 MHz to 50 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -30 dBm to +20 dBm)
• 50 ohm impedance
• 2.4 mm(m) connector
Scheda Tecnica -
Power Supply
AGILENT-Hp/Keysight E3631A
The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package.
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 A
Programming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms Readback Accuracy at 25°C ±5° 1200W, DC System Power Supplies,60V - 50A. Datasheet -
Oscillator
HP-Agilent/Keysight 8350B
Sweep generator mainframe
Hewlett Packard 8350B Sweep Oscillator Mainframe, Refurbished Versatile microprocessor-controlled mainframe Single-band, straddle-band and broad band plug-ins Accurate, high resolution, digital displays Five marker with marker D and marker sweep Save/recall 9 complete front panel states 10 mV output power to 26.5 GHz Total HP-IB programmability Compatible with HP Network Analyzers Accepts all HP 83500 series plug-ins Options: 400 – 400 Hz Power Line Frequency Operation 803 – HP 5343A Interface Cables 850 – HP 8410C Source Control Cables 908 – Rack Mount Kit 910 – Rack Flange Kit for Instruments with Front Handles Ordering Information -
PEAK POWER SENSOR
HP 8991A Peak Power Meter
The HP 8991A peak power analyzer provides complete and accurate characterization of today's complex pulsed signals. It is capable of performing seven automatic timing measurements (rise time, fall time, pulse width, PRI, PRF, duty cycle, and delay) and five automatic power measurement (peak power, average power, pulse top/base amplitude, and overshoot) with push-button ease. Front-panel operation is intuitive and straightforward. Data entries can be typed in or made with the front panel knob; automatic measurements are made with simple keystroke. The 8990A offers two sensor channels plus two external triggering/oscilloscope channels, allowing the simultaneous measurement of modulating signals and detector power envelopes.
* Amplitude and time markers for measuring power exactly where its needed
* Two oscilloscope channels for measuring time delay between video and microwave pulse
* Versatile triggering enables the capturing of exclusive glitches
* Waveform math functions for measuring scalar pulse parameters
* Dynamic Range: >45 dB
* Minimum Pulse Width: 20 ns
* Rise Time: <5 ns * Sensor and Video Inputs: 1 and 4; 2 and 3 -
Power Supply
HP-Agilent/Keysight E3620A
50W Dual Output Power Supply, Two 25V, 1A
Keysight basic DC power supplies offer essential features for a tight budget.
The multiple output, 35-50 W, E3620A and E3630A provide dual and triple outputs; small, compact size for bench use; low-noise and excellent regulation; and overload indicator to monitor output.
The Keysight 50W, dual output E3620A has two clean, reliable outputs for general purpose application; and is compact, affordable for versatile benchtop testing.Output ratings (Maximum current is derated 3.3% per °C from 40°C to 55°C)
> Output 1: 0 to 25 V, 0 to 1 A
> Output 2: 0 to 25 V, 0 to 1 A
> Power (max): 50 WRipple & noise from 20 Hz to 20 MHz
> Normal Mode Voltage rms: 350 µV
> Peak-to-Peak: 1.5 mVLoad & line regulation
> 0.01% + 2mVMeter resolution
> Voltage: 10 mV (0-20 V), 100 mV, (>20 V)
> Current: 1 mA -
Power Sensor
HP-Agilent/Keysight R8486D
The R8486D diode waveguide power sensor measures average power over the frequency range 26.5 GHz to 40 GHz and power range -70 to -20 dBm (50 dB dynamic range).
Excellent SWR for reducing mismatch uncertainty
50 MHz calibration port
Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
Accurate average power measurements over -70 to -20 dBm
Frequency range 26.5 GHz to 40 GHz
Diode power sensing elementThe Keysight 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
Datasheet
-
Power Supply
AGILENT-Hp/Keysight E3646A
The Agilent E3646A 60-watt dual-output programmable power supply features built-in GPIB and RS-232 connectivity and SCPI language compatibility making it easy to create flexible power programs. For general-purpose use, this programmable power supply offers the performance of a system power supply at a surprisingly affordable price.
E364X: Basic System Power
The Agilent E3640A – E3649A power supplies fill the gap between manual bench power supplies and high performance system supplies, offering unmatched performance and functionality at a great price. They’re designed for moderate-speed test where automation is important and throughput is not critical. These single- and dual-output, dual range power supplies are ideal for contract manufacturers and OEMs who need to perform basic electronic functional tests on a variety of products quickly and economically.All models support GPIB and RS-232 for quick connectivity. SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. Less than 90 ms output settling time keeps throughput high without the need for a down programmer. Up to five store/recall states help minimize programming time while accelerating test. Remote sensing capability ensures output stability with longer leads.
Great Performance, Outstanding Price
With 30 to 100W of output power, the Agilent E364xA-series of programmable dc power supplies provides great performance at a great price. All ten models deliver clean power, dependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They’re designed to meet the needs of R&D design verification, production testing, QA verifications and other demanding applications with Agilent Technologies’ quality and reliability.Steady Output
With 0.01 percent load and line regulation, Agilent E364xA power supplies keep output steady when power line and load changes occur. They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Agilent E364xA power supplies specify less than 90 msec of voltage settling time at any output load condition.Remote Interface
Agilent E364xA power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232. Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well.Broad Support
VXIplug&play software drivers are available for Agilent VEE and National Instruments LabView™ and LabWindows™, simplifying integration of the E364xA into your test system. The drivers are supported under Microsoft® Windows 98 ® and NT. ®Front Panel Operation
An easy-to-use rotary knob and self-guiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of 10 mV/1 mA from the front panel. Up to five complete powers supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously.
Datasheet -
Power Sensor
HP-Agilent/Keysight 8485D
The 8485D diode power sensor measures average power over the frequency range 50 MHz to 26.5 GHz and power range -70 to -20 dBm (50 dB dynamic range).
Excellent SWR for reducing mismatch uncertainty
Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
Accurate average power measurements over -70 to -20 dBm
Frequency range 50 MHz to 26.5 GHz
Diode power sensing element
Datasheet -
Power Sensor
AGILENT – Hp/Keysight 8487A
HP AGILENT KEYSIGHT 8487A POWER SENSOR 50 MHz to 50 GHz
The 8487A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM series, EPM-P series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters. The 8487A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 50 MHz to 50 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -30 dBm to +20 dBm)
• 50 ohm impedance
• 2.4 mm(m) connector
Scheda Tecnica -
Power Supply
AGILENT-Hp/Keysight E3631A
The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package.
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 A
Programming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms Readback Accuracy at 25°C ±5° 1200W, DC System Power Supplies,60V - 50A. Datasheet -
Oscillator
HP-Agilent/Keysight 8350B
Sweep generator mainframe
Hewlett Packard 8350B Sweep Oscillator Mainframe, Refurbished Versatile microprocessor-controlled mainframe Single-band, straddle-band and broad band plug-ins Accurate, high resolution, digital displays Five marker with marker D and marker sweep Save/recall 9 complete front panel states 10 mV output power to 26.5 GHz Total HP-IB programmability Compatible with HP Network Analyzers Accepts all HP 83500 series plug-ins Options: 400 – 400 Hz Power Line Frequency Operation 803 – HP 5343A Interface Cables 850 – HP 8410C Source Control Cables 908 – Rack Mount Kit 910 – Rack Flange Kit for Instruments with Front Handles Ordering Information -
PEAK POWER SENSOR
HP 8991A Peak Power Meter
The HP 8991A peak power analyzer provides complete and accurate characterization of today's complex pulsed signals. It is capable of performing seven automatic timing measurements (rise time, fall time, pulse width, PRI, PRF, duty cycle, and delay) and five automatic power measurement (peak power, average power, pulse top/base amplitude, and overshoot) with push-button ease. Front-panel operation is intuitive and straightforward. Data entries can be typed in or made with the front panel knob; automatic measurements are made with simple keystroke. The 8990A offers two sensor channels plus two external triggering/oscilloscope channels, allowing the simultaneous measurement of modulating signals and detector power envelopes.
* Amplitude and time markers for measuring power exactly where its needed
* Two oscilloscope channels for measuring time delay between video and microwave pulse
* Versatile triggering enables the capturing of exclusive glitches
* Waveform math functions for measuring scalar pulse parameters
* Dynamic Range: >45 dB
* Minimum Pulse Width: 20 ns
* Rise Time: <5 ns * Sensor and Video Inputs: 1 and 4; 2 and 3 -
Power Supply
HP-Agilent/Keysight E3620A
50W Dual Output Power Supply, Two 25V, 1A
Keysight basic DC power supplies offer essential features for a tight budget.
The multiple output, 35-50 W, E3620A and E3630A provide dual and triple outputs; small, compact size for bench use; low-noise and excellent regulation; and overload indicator to monitor output.
The Keysight 50W, dual output E3620A has two clean, reliable outputs for general purpose application; and is compact, affordable for versatile benchtop testing.Output ratings (Maximum current is derated 3.3% per °C from 40°C to 55°C)
> Output 1: 0 to 25 V, 0 to 1 A
> Output 2: 0 to 25 V, 0 to 1 A
> Power (max): 50 WRipple & noise from 20 Hz to 20 MHz
> Normal Mode Voltage rms: 350 µV
> Peak-to-Peak: 1.5 mVLoad & line regulation
> 0.01% + 2mVMeter resolution
> Voltage: 10 mV (0-20 V), 100 mV, (>20 V)
> Current: 1 mA -
Power Sensor
HP-Agilent/Keysight R8486D
The R8486D diode waveguide power sensor measures average power over the frequency range 26.5 GHz to 40 GHz and power range -70 to -20 dBm (50 dB dynamic range).
Excellent SWR for reducing mismatch uncertainty
50 MHz calibration port
Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
Accurate average power measurements over -70 to -20 dBm
Frequency range 26.5 GHz to 40 GHz
Diode power sensing elementThe Keysight 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
Datasheet