ItalianoHP-Agilent/Keysight
Showing 241–270 of 455 results
-
Power Sensor
HP 84812A Peak Power Sensor, 0.5-18 GHz, -40 dBm to 20 dBm
The HP 84812A peak power sensor is compatible with the obsolete 8990/1A peak power analyzers and the obsolete 8992A digital video power analyzer. This sensor gives you outstanding measurement accuracy in demanding situations and includes automatic temperature sensing and correction.
* Outstanding measurement accuracy
* Automatic temperature sensing and correctionSKU: 941 -
40-Channel Armature Multiplexer
HP-Agilent/Keysight 34921A
34921A 40-Channel Armature Multiplexer for 34980A The Keysight 34921A module for the 34980A Multifunction Switch/Measure Unit is the most versatile multiplexer for general purpose scanning. It has low thermal offset characteristics and a built-in thermocouple reference on the terminal block, making it ideal for temperature measurements directly to the internal DMM. The dense, multi-function switching with 100 channel/second scan rates addresses a broad spectrum of data acquisition applications. Four additional fused inputs (44 channels total) route up to 1A of current to the internal DMM, allowing AC and DC current measurements without the need for external shunt resistors. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions. – 40 2-wire channels – 300V, 1A switch- 2A carry current – 100 ch/s scanning – Mix 2- or 4-wire configurations – Built-in thermocouple reference junction – 4 current channels – Latching armature relays, with relay counter
SKU: 1006 -
Power Supply
HP-Agilent/Keysight E3614A
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 48W, single output E3614A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. – Range 1: 0 to 8 V, 0 to 6 A. – Range 2: NA. – Power (max): 48 W. – Voltage rms: 200 µV. – Peak-to-Peak: 1 mV. – 0.01% + 2 mV. – Voltage: 10 mV. – Current: 10 mA. 48W, 8V, 6A
SKU: 1101 -
Power Sensor
HP-Agilent/Keysight 8484A
The HP/Agilent 8484A is a diode power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 435A/B, 436A, 437A/B, and 438A power meters. It is a high sensitivity sensor operating from 10 MHz to 18 GHz at power levels from -70 to -20 dBm. The 8484A High Sensitivity Power Sensor measures power from 0.1nW to 10 uW over a frequency range of 10MHz to 18GHz.
SKU: 1287 -
NOISE SOURCE
HP-Agilent/Keysight R347B
La sorgente di rumore Keysight R347B copre una gamma di frequenza da 26,5 a 40 GHz. Questa sorgente di rumore a guida d'onda consente di effettuare misurazioni accurate e convenienti della figura di rumore su dispositivi a onde millimetriche. L'R347B fornisce un rumore a banda larga ad alta precisione all'ingresso del sistema o del componente in prova. Il misuratore della figura di rumore elabora quindi il rapporto ON/OFF della potenza di rumore presente nel sistema IF e fornisce una lettura accurata della figura di rumore e del guadagno. La sorgente di rumore R347B ha una notevole stabilità ENR nel tempo, che consente cicli di ricalibrazione più lunghi e misurazioni della figura di rumore più accurate. Prestazioni e affidabilità a frequenze millimetriche Eccellente stabilità ENR nel tempo Basso ROS
SKU: n/a -
Digital Multimeter
HP-Agilent/Keysight 34401A
The Agilent 34401A multimeter is a tool kit of useful testing functions. In addition to the standard functions you´ve come to expect from a high quality digital multimeter, you also get many other capabilities, from min/max/avg to built-in limit testing. 6½ digit precision measurements for an affordable price means you can make measurements with confidence without breaking your budget. Features: 6½ digit resolution. 0.0035% 1 year dcV accuracy, 0.06% 1 year acV accuracy. Twelve measurement functions, plus limit testing and min/max/average. True RMS AC volts and current. 1000 readings/second in ASCII format across the GPIB bus. RS-232 and GPIB Standard, USB optional.
DatasheetSKU: 57 -
Spectrum Analyzer
HP-Agilent/Keysight 8565E
The Keysight (Agilent/HP) 8565E 30 Hz – 50 GHz millimeter spectrum analyzer offers the measurement capability and performance previously found in larger, more expensive benchtop analyzers. You can measure signals from 30 Hz to 50 GHz (preselected above 2.75 GHz) with a single coaxial connection.
The 8565E combines outstanding phase noise, sensitivity, 1 Hz resolution bandwidths, synthesized tuning and wide dynamic range in a MIL-rugged package built to withstand harsh environmental conditions. It offers a complete solution for adjacent-channel power (ACP) testing of burst carrier signals using digital modulation, and the ability to measure occupied bandwidth percentage.
Keysight (Agilent/HP) 8565E Specifications:Continuous 30 Hz to 50 GHz sweep
Fast digital resolution bandwidths of 1, 3, 10, 30 and 100 Hz
Adjacent channel power, channel power, carrier power, occupied bandwidth percentage and time-gated measurements standard
Precision timebase and 1 Hz counter resolution
MIL-T-28800 rugged
Measurement personalities for digital radio and phase noise measurements
DatasheetSKU: 134 -
Module
AGILENT 34907A Multifunction Module for 34970A/34972A
The HP 34907A module for the 34970A/34972A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs – all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors.
It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.
Key Features & Specifications:
– 16 bits of digital input and output
– 100 kHz totalizer input
– Two +/-12V analog outputsSKU: 1145 -
Frequency Counter
HP – Agilent/ Keysight 53181A
Optimized for RF applications, the single-channel 10 digit/s 53181A measures frequency, period and peak voltage. A digit-blanking function lets you easily eliminate unnecessary digits when you want to read measurements quickly. For higher-frequency measurements, choose an optional second channel that provides measurements up to 1.5, 3, 5, or 12.4 GHz. A self-guided shallow menu makes this counter exceptionally easy to use
RF Frequency Counter, 10 digits/s
One 225 MHz input channel, plus optional second channel up to 12.4 GHz
10 digits/second resolution
GPIB StandardThe Keysight Technologies, Inc. 53131A/132A/181A high-performance counters give you fast, precise frequency measurements at an affordable price. These counters feature an intuitive user interface and one-button access to frequently used functions so you can make accurate measurements quickly and easily. Real-time digital signal processing technology is used to analyze data while simultaneously taking new readings, speeding measurement throughput. The technology, developed for Keysight’s high-end line of modulation domain analyzers, allows the counters to gather more data for each measurement, so you get higher-resolution measurements in a fraction of the time it takes other counters. The 53131A/132A/181A counters offer built-in statistics and math functions so you can scale measurements and simultaneously measure and track average, min/max and standard deviation. Automated limit testing lets you set upper and lower limits for any measurement. An analog display mode lets you see at a glance whether a measurement is within pass/fail limits. The counters flag out-of-limit conditions and can generate an output signal to trigger external devices when a limit is exceeded. For quick access to frequently used tests, a single keystroke recalls up to 20 different stored front-panel set-ups. For computer-controlled systems applications, each counter includes a standard GPIB interface with full SCPI-compatible programmability and a data transfer rate of up to 200 fully formatted measurements per second. The standard RS-232 talk-only interface provides printer support or data transfer to a computer through a terminal-emulation program.
DatasheetSKU: n/a -
Power Sensor
AGILENT-Hp/Keysight 8481A
HP AGILENT KEYSIGHT POWER SENSOR 8481A 10 MHz to 18 GHz
The 8481A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM Series, EPM-P Series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters.
8481A offers extraordinary precision, stability and lower SWR.
• Excellent SWR to reduce mismatch uncertainty
• Accurately calibrated and traceable to the US National Institute of Standards and Technology (NIST).
• Compatible with EPM, EPM-P, and P Series power meters, as well as E1416A VXI and discontinued 70100A and 43X power switches
• Accurate average power measurements over -30 to +20 dBm
• Frequency range from 10 MHz to 18 GHz
• Element sensitive to the power of the thermocouple
• Measurement range: 1 µW to 100 mW (-30 dBm to +20 dBm)
• impedance 50 ohm
• Connector N (m)SKU: n/a -
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave ModulationSKU: 397€0.00 View Product
-
Power Sensor
HP 84812A Peak Power Sensor, 0.5-18 GHz, -40 dBm to 20 dBm
The HP 84812A peak power sensor is compatible with the obsolete 8990/1A peak power analyzers and the obsolete 8992A digital video power analyzer. This sensor gives you outstanding measurement accuracy in demanding situations and includes automatic temperature sensing and correction.
* Outstanding measurement accuracy
* Automatic temperature sensing and correction -
40-Channel Armature Multiplexer
HP-Agilent/Keysight 34921A
34921A 40-Channel Armature Multiplexer for 34980A The Keysight 34921A module for the 34980A Multifunction Switch/Measure Unit is the most versatile multiplexer for general purpose scanning. It has low thermal offset characteristics and a built-in thermocouple reference on the terminal block, making it ideal for temperature measurements directly to the internal DMM. The dense, multi-function switching with 100 channel/second scan rates addresses a broad spectrum of data acquisition applications. Four additional fused inputs (44 channels total) route up to 1A of current to the internal DMM, allowing AC and DC current measurements without the need for external shunt resistors. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions. – 40 2-wire channels – 300V, 1A switch- 2A carry current – 100 ch/s scanning – Mix 2- or 4-wire configurations – Built-in thermocouple reference junction – 4 current channels – Latching armature relays, with relay counter
-
Power Supply
HP-Agilent/Keysight E3614A
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 48W, single output E3614A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. – Range 1: 0 to 8 V, 0 to 6 A. – Range 2: NA. – Power (max): 48 W. – Voltage rms: 200 µV. – Peak-to-Peak: 1 mV. – 0.01% + 2 mV. – Voltage: 10 mV. – Current: 10 mA. 48W, 8V, 6A
-
Power Sensor
HP-Agilent/Keysight 8484A
The HP/Agilent 8484A is a diode power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 435A/B, 436A, 437A/B, and 438A power meters. It is a high sensitivity sensor operating from 10 MHz to 18 GHz at power levels from -70 to -20 dBm. The 8484A High Sensitivity Power Sensor measures power from 0.1nW to 10 uW over a frequency range of 10MHz to 18GHz.
-
NOISE SOURCE
HP-Agilent/Keysight R347B
La sorgente di rumore Keysight R347B copre una gamma di frequenza da 26,5 a 40 GHz. Questa sorgente di rumore a guida d'onda consente di effettuare misurazioni accurate e convenienti della figura di rumore su dispositivi a onde millimetriche. L'R347B fornisce un rumore a banda larga ad alta precisione all'ingresso del sistema o del componente in prova. Il misuratore della figura di rumore elabora quindi il rapporto ON/OFF della potenza di rumore presente nel sistema IF e fornisce una lettura accurata della figura di rumore e del guadagno. La sorgente di rumore R347B ha una notevole stabilità ENR nel tempo, che consente cicli di ricalibrazione più lunghi e misurazioni della figura di rumore più accurate. Prestazioni e affidabilità a frequenze millimetriche Eccellente stabilità ENR nel tempo Basso ROS
-
Digital Multimeter
HP-Agilent/Keysight 34401A
The Agilent 34401A multimeter is a tool kit of useful testing functions. In addition to the standard functions you´ve come to expect from a high quality digital multimeter, you also get many other capabilities, from min/max/avg to built-in limit testing. 6½ digit precision measurements for an affordable price means you can make measurements with confidence without breaking your budget. Features: 6½ digit resolution. 0.0035% 1 year dcV accuracy, 0.06% 1 year acV accuracy. Twelve measurement functions, plus limit testing and min/max/average. True RMS AC volts and current. 1000 readings/second in ASCII format across the GPIB bus. RS-232 and GPIB Standard, USB optional.
Datasheet -
Spectrum Analyzer
HP-Agilent/Keysight 8565E
The Keysight (Agilent/HP) 8565E 30 Hz – 50 GHz millimeter spectrum analyzer offers the measurement capability and performance previously found in larger, more expensive benchtop analyzers. You can measure signals from 30 Hz to 50 GHz (preselected above 2.75 GHz) with a single coaxial connection.
The 8565E combines outstanding phase noise, sensitivity, 1 Hz resolution bandwidths, synthesized tuning and wide dynamic range in a MIL-rugged package built to withstand harsh environmental conditions. It offers a complete solution for adjacent-channel power (ACP) testing of burst carrier signals using digital modulation, and the ability to measure occupied bandwidth percentage.
Keysight (Agilent/HP) 8565E Specifications:Continuous 30 Hz to 50 GHz sweep
Fast digital resolution bandwidths of 1, 3, 10, 30 and 100 Hz
Adjacent channel power, channel power, carrier power, occupied bandwidth percentage and time-gated measurements standard
Precision timebase and 1 Hz counter resolution
MIL-T-28800 rugged
Measurement personalities for digital radio and phase noise measurements
Datasheet -
Module
AGILENT 34907A Multifunction Module for 34970A/34972A
The HP 34907A module for the 34970A/34972A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs – all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors.
It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.
Key Features & Specifications:
– 16 bits of digital input and output
– 100 kHz totalizer input
– Two +/-12V analog outputs -
Frequency Counter
HP – Agilent/ Keysight 53181A
Optimized for RF applications, the single-channel 10 digit/s 53181A measures frequency, period and peak voltage. A digit-blanking function lets you easily eliminate unnecessary digits when you want to read measurements quickly. For higher-frequency measurements, choose an optional second channel that provides measurements up to 1.5, 3, 5, or 12.4 GHz. A self-guided shallow menu makes this counter exceptionally easy to use
RF Frequency Counter, 10 digits/s
One 225 MHz input channel, plus optional second channel up to 12.4 GHz
10 digits/second resolution
GPIB StandardThe Keysight Technologies, Inc. 53131A/132A/181A high-performance counters give you fast, precise frequency measurements at an affordable price. These counters feature an intuitive user interface and one-button access to frequently used functions so you can make accurate measurements quickly and easily. Real-time digital signal processing technology is used to analyze data while simultaneously taking new readings, speeding measurement throughput. The technology, developed for Keysight’s high-end line of modulation domain analyzers, allows the counters to gather more data for each measurement, so you get higher-resolution measurements in a fraction of the time it takes other counters. The 53131A/132A/181A counters offer built-in statistics and math functions so you can scale measurements and simultaneously measure and track average, min/max and standard deviation. Automated limit testing lets you set upper and lower limits for any measurement. An analog display mode lets you see at a glance whether a measurement is within pass/fail limits. The counters flag out-of-limit conditions and can generate an output signal to trigger external devices when a limit is exceeded. For quick access to frequently used tests, a single keystroke recalls up to 20 different stored front-panel set-ups. For computer-controlled systems applications, each counter includes a standard GPIB interface with full SCPI-compatible programmability and a data transfer rate of up to 200 fully formatted measurements per second. The standard RS-232 talk-only interface provides printer support or data transfer to a computer through a terminal-emulation program.
Datasheet -
Power Sensor
AGILENT-Hp/Keysight 8481A
HP AGILENT KEYSIGHT POWER SENSOR 8481A 10 MHz to 18 GHz
The 8481A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM Series, EPM-P Series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters.
8481A offers extraordinary precision, stability and lower SWR.
• Excellent SWR to reduce mismatch uncertainty
• Accurately calibrated and traceable to the US National Institute of Standards and Technology (NIST).
• Compatible with EPM, EPM-P, and P Series power meters, as well as E1416A VXI and discontinued 70100A and 43X power switches
• Accurate average power measurements over -30 to +20 dBm
• Frequency range from 10 MHz to 18 GHz
• Element sensitive to the power of the thermocouple
• Measurement range: 1 µW to 100 mW (-30 dBm to +20 dBm)
• impedance 50 ohm
• Connector N (m) -
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave Modulation
-
Power Sensor
HP 84812A Peak Power Sensor, 0.5-18 GHz, -40 dBm to 20 dBm
The HP 84812A peak power sensor is compatible with the obsolete 8990/1A peak power analyzers and the obsolete 8992A digital video power analyzer. This sensor gives you outstanding measurement accuracy in demanding situations and includes automatic temperature sensing and correction.
* Outstanding measurement accuracy
* Automatic temperature sensing and correction -
40-Channel Armature Multiplexer
HP-Agilent/Keysight 34921A
34921A 40-Channel Armature Multiplexer for 34980A The Keysight 34921A module for the 34980A Multifunction Switch/Measure Unit is the most versatile multiplexer for general purpose scanning. It has low thermal offset characteristics and a built-in thermocouple reference on the terminal block, making it ideal for temperature measurements directly to the internal DMM. The dense, multi-function switching with 100 channel/second scan rates addresses a broad spectrum of data acquisition applications. Four additional fused inputs (44 channels total) route up to 1A of current to the internal DMM, allowing AC and DC current measurements without the need for external shunt resistors. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions. – 40 2-wire channels – 300V, 1A switch- 2A carry current – 100 ch/s scanning – Mix 2- or 4-wire configurations – Built-in thermocouple reference junction – 4 current channels – Latching armature relays, with relay counter
-
Power Supply
HP-Agilent/Keysight E3614A
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 48W, single output E3614A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. – Range 1: 0 to 8 V, 0 to 6 A. – Range 2: NA. – Power (max): 48 W. – Voltage rms: 200 µV. – Peak-to-Peak: 1 mV. – 0.01% + 2 mV. – Voltage: 10 mV. – Current: 10 mA. 48W, 8V, 6A
-
Power Sensor
HP-Agilent/Keysight 8484A
The HP/Agilent 8484A is a diode power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 435A/B, 436A, 437A/B, and 438A power meters. It is a high sensitivity sensor operating from 10 MHz to 18 GHz at power levels from -70 to -20 dBm. The 8484A High Sensitivity Power Sensor measures power from 0.1nW to 10 uW over a frequency range of 10MHz to 18GHz.
-
NOISE SOURCE
HP-Agilent/Keysight R347B
La sorgente di rumore Keysight R347B copre una gamma di frequenza da 26,5 a 40 GHz. Questa sorgente di rumore a guida d'onda consente di effettuare misurazioni accurate e convenienti della figura di rumore su dispositivi a onde millimetriche. L'R347B fornisce un rumore a banda larga ad alta precisione all'ingresso del sistema o del componente in prova. Il misuratore della figura di rumore elabora quindi il rapporto ON/OFF della potenza di rumore presente nel sistema IF e fornisce una lettura accurata della figura di rumore e del guadagno. La sorgente di rumore R347B ha una notevole stabilità ENR nel tempo, che consente cicli di ricalibrazione più lunghi e misurazioni della figura di rumore più accurate. Prestazioni e affidabilità a frequenze millimetriche Eccellente stabilità ENR nel tempo Basso ROS
-
Digital Multimeter
HP-Agilent/Keysight 34401A
The Agilent 34401A multimeter is a tool kit of useful testing functions. In addition to the standard functions you´ve come to expect from a high quality digital multimeter, you also get many other capabilities, from min/max/avg to built-in limit testing. 6½ digit precision measurements for an affordable price means you can make measurements with confidence without breaking your budget. Features: 6½ digit resolution. 0.0035% 1 year dcV accuracy, 0.06% 1 year acV accuracy. Twelve measurement functions, plus limit testing and min/max/average. True RMS AC volts and current. 1000 readings/second in ASCII format across the GPIB bus. RS-232 and GPIB Standard, USB optional.
Datasheet -
Spectrum Analyzer
HP-Agilent/Keysight 8565E
The Keysight (Agilent/HP) 8565E 30 Hz – 50 GHz millimeter spectrum analyzer offers the measurement capability and performance previously found in larger, more expensive benchtop analyzers. You can measure signals from 30 Hz to 50 GHz (preselected above 2.75 GHz) with a single coaxial connection.
The 8565E combines outstanding phase noise, sensitivity, 1 Hz resolution bandwidths, synthesized tuning and wide dynamic range in a MIL-rugged package built to withstand harsh environmental conditions. It offers a complete solution for adjacent-channel power (ACP) testing of burst carrier signals using digital modulation, and the ability to measure occupied bandwidth percentage.
Keysight (Agilent/HP) 8565E Specifications:Continuous 30 Hz to 50 GHz sweep
Fast digital resolution bandwidths of 1, 3, 10, 30 and 100 Hz
Adjacent channel power, channel power, carrier power, occupied bandwidth percentage and time-gated measurements standard
Precision timebase and 1 Hz counter resolution
MIL-T-28800 rugged
Measurement personalities for digital radio and phase noise measurements
Datasheet -
Module
AGILENT 34907A Multifunction Module for 34970A/34972A
The HP 34907A module for the 34970A/34972A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs – all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors.
It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.
Key Features & Specifications:
– 16 bits of digital input and output
– 100 kHz totalizer input
– Two +/-12V analog outputs -
Frequency Counter
HP – Agilent/ Keysight 53181A
Optimized for RF applications, the single-channel 10 digit/s 53181A measures frequency, period and peak voltage. A digit-blanking function lets you easily eliminate unnecessary digits when you want to read measurements quickly. For higher-frequency measurements, choose an optional second channel that provides measurements up to 1.5, 3, 5, or 12.4 GHz. A self-guided shallow menu makes this counter exceptionally easy to use
RF Frequency Counter, 10 digits/s
One 225 MHz input channel, plus optional second channel up to 12.4 GHz
10 digits/second resolution
GPIB StandardThe Keysight Technologies, Inc. 53131A/132A/181A high-performance counters give you fast, precise frequency measurements at an affordable price. These counters feature an intuitive user interface and one-button access to frequently used functions so you can make accurate measurements quickly and easily. Real-time digital signal processing technology is used to analyze data while simultaneously taking new readings, speeding measurement throughput. The technology, developed for Keysight’s high-end line of modulation domain analyzers, allows the counters to gather more data for each measurement, so you get higher-resolution measurements in a fraction of the time it takes other counters. The 53131A/132A/181A counters offer built-in statistics and math functions so you can scale measurements and simultaneously measure and track average, min/max and standard deviation. Automated limit testing lets you set upper and lower limits for any measurement. An analog display mode lets you see at a glance whether a measurement is within pass/fail limits. The counters flag out-of-limit conditions and can generate an output signal to trigger external devices when a limit is exceeded. For quick access to frequently used tests, a single keystroke recalls up to 20 different stored front-panel set-ups. For computer-controlled systems applications, each counter includes a standard GPIB interface with full SCPI-compatible programmability and a data transfer rate of up to 200 fully formatted measurements per second. The standard RS-232 talk-only interface provides printer support or data transfer to a computer through a terminal-emulation program.
Datasheet -
Power Sensor
AGILENT-Hp/Keysight 8481A
HP AGILENT KEYSIGHT POWER SENSOR 8481A 10 MHz to 18 GHz
The 8481A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM Series, EPM-P Series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters.
8481A offers extraordinary precision, stability and lower SWR.
• Excellent SWR to reduce mismatch uncertainty
• Accurately calibrated and traceable to the US National Institute of Standards and Technology (NIST).
• Compatible with EPM, EPM-P, and P Series power meters, as well as E1416A VXI and discontinued 70100A and 43X power switches
• Accurate average power measurements over -30 to +20 dBm
• Frequency range from 10 MHz to 18 GHz
• Element sensitive to the power of the thermocouple
• Measurement range: 1 µW to 100 mW (-30 dBm to +20 dBm)
• impedance 50 ohm
• Connector N (m) -
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave Modulation€0.00 View Product