ItalianoShop
Showing 631–660 of 1386 results
-
Test Set
HP-Agilent/Keysight 85046A
The Agilent 85046A test set provides the capability to simultaneously measure the transmission and reflection characteristics of 50 ohm devices. The test set is controlled from the analyzer and includes programmable step attenuators. It can be used with the Agilent 8753A/B/C, 8753D/E/ES Option 011, 4395, 4396 and selected 8702 lightwave component analyzer configurations. – Provides the capability to measure reflection and transmission characteristics (including S-parameters) of two-port devices in either direction with a single connection. – Includes a programmable step attenuator – Frequency range 300 kHz to 3 GHz – Contains precision 7 mm connectors
SKU: 298 -
Oscilloscope 2 channels
Rigol MSO4022
200 MHz, 2 channel, 4 GS/s
MSO4000 Series is the new mainstream digital scope to meet the customer’s applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. – Bandwidth 200MHz – Sample Rate Analog channel up to 4 GSa/s, Digital Channel up to 1 GSa/s(MSO) – Standard Memory depth: Analog channel up to 140 Mpts, Digital Channel up to 28 Mpts(MSO) – 2 Analog Channels, 16 Digital channels(MSO) – Waveform capture rate Up to 110,000 waveforms per second, – Real Time Waveform Record, Replay & Analysis(Std. up to 200,000 frames) – Lower noise floor, the Min. vertical sensitivity is 1mV/div – Innovative “UltraVision” technology – A variety of Trigger functions – Support serial bus trigger(Std.) and decoding(Opt.) for both analog and digital channels – Complete Connectivity: USB Host& Device, LAN(LXI-C), VGA, AUX,USB-GPIB(Opt.) – 9 inch WVGA(800X480), 256 level intensity grading displaySKU: 731 -
GPIB INTERFACE MODULE
HP-Agilent/Keysight N2757A
AGILENT N2757A – GPIB INTERFACE MODULE N2757A is a GPIB interface module for fast data transfers. If you need fast data transfers, equip your 5462X oscilloscope with GPIB communication. Keysight offers the N2757A GPIB interface module to provide a GPIB port for your oscilloscope.
SKU: 1066 -
Power Supply
HP-Agilent/Keysight E3614A
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 48W, single output E3614A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. – Range 1: 0 to 8 V, 0 to 6 A. – Range 2: NA. – Power (max): 48 W. – Voltage rms: 200 µV. – Peak-to-Peak: 1 mV. – 0.01% + 2 mV. – Voltage: 10 mV. – Current: 10 mA. 48W, 8V, 6A
SKU: 1101 -
Video Measurement System
ROHDE & SCHWARZ VSA Video Measurement System 2013.6057.03
Video Measurement System VSA from R&S combines the functions of a video analyzer, vectorscope, oscilloscope, monitor and controller (PC) in a 19″ desktop.
◆ Video and FFT analyzer
◆ 3-channel oscilloscope
◆ Vectorscope
◆ Monitor
◆ Four video-signal inputs with 9 MHz bandwidth
◆ High-contrast color LCD
◆ Convenient menu-driven user interface
◆ In labs and service centers
◆ In automatic measuring and monitoring systems
◆ In production and quality assurance of video equipment.The great versatility of the VideoMeasurement System ¸VSA makes it suitable for a wide range of applications.
Users in both laboratory and service environments will value the comprehensive measurement capabilities as well as the high operating convenience of the integrated instruments.
The integrated PC makes the VSA ideal for use as an automatic test and monitoring system, e.g. for TV transmitters or cable networks. No external controller is required for system
control.An integrated hard disk allows a large number of measurement results and graphics to be stored for later evaluation. This is a great advantage especially for mobile applications.
In the production of video equipmentthe VSA cannot be beaten for its high measurement speed. Results are computed virtually in realtime even if long test reports are called for, and this considerably reduces time and costs.
DatasheetSKU: n/a -
Network Analyzer
HP/Agilent-Keysight 8753D
The HP 8753D is a vector network analyzer and it offers even more flexibility and measurement capability than the HP 8752C in the following areas:
* Frequency range from 30 kHz to 3 GHz.
* Built-in S-parameter test set provides complete forward and reverse measurements, allowing you to completely characterize your component with a single connection.
* 50 and 75 ohm solutions.
* Superb accuracy. The most comprehensive calibration available guarantees accurate measurements. TRL**nRMt makes calibration in non-coaxial environments easier and more convenient.
* Mixer testing. Quickly and easily characterize frequency translating devices such as mixers.
* Add swept harmonic measurements. Characterize amplifter parameters – gain, 1 dB compression, match – and 2nd and 3rd harmonic distortion with the same test setup.
* Built-in 3.5 inch floppy disk drive provides convenient storage of instrument states and data.
* Parallel and serial ports provide interfaces to popular printers and plotters. The parallel port can also be used as a general U0 bus, with user-controllable TI'L inputs and outputs. Users can also connect a DIN keyboard to speed up entry of titles, labels, or file names, and for remote hnt panel operation.Two excellent choices, the HP 8752C and HP 8753D continue the tradition of affordable excellence in RF component measurements for the lab and production test areas. The HP 8752C and HP 8753D network analyzers bring superior performance and useful productivity features to simplify and speed your device, component, or network measurements in the 30 kHz to 6 GHz frequency range. A swept synthesized source, sensitive receiver, and crisp color display ensure rapid, accurate, and easy-to-read test results. Since the HP 8752C and HP 8753D are vector network analyzers, they not only provide magnitude and phase information, but also offer up to 1 10 dB dynamic range, make group delay and time domain measurements, and utilize vector accuracy enhancement to minimize measurement uncertainty.
DatasheetSKU: n/a -
Power Source / Power Analyzer
HP-Agilent/Keysight 85901A
The Keysight 85901A Portable AC Power Source works with your test equipment to provide the power you need, where you need it. The power source is small, with a briefcase handle that makes it easy to carry and it fits into tight spots. You can use the built-in battery of the power source or connect it to an external 12 Vdc source for even longer operation.
200 Watts continuous output
115 Vrms or 230 Vrms output
Internal battery or external 12 Vdc source
Built-in charger
Up to 2 hour operation of Keysight 8590 Series Spectrum Analyzers
Easy to carry
DatasheetSKU: n/a -
Cable
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 2m
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – COLOR BLACK SMA M- SMA M 2m
e ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.
The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
DatasheetSKU: n/a
-
Test Set
HP-Agilent/Keysight 85046A
The Agilent 85046A test set provides the capability to simultaneously measure the transmission and reflection characteristics of 50 ohm devices. The test set is controlled from the analyzer and includes programmable step attenuators. It can be used with the Agilent 8753A/B/C, 8753D/E/ES Option 011, 4395, 4396 and selected 8702 lightwave component analyzer configurations. – Provides the capability to measure reflection and transmission characteristics (including S-parameters) of two-port devices in either direction with a single connection. – Includes a programmable step attenuator – Frequency range 300 kHz to 3 GHz – Contains precision 7 mm connectors
-
Oscilloscope 2 channels
Rigol MSO4022
200 MHz, 2 channel, 4 GS/s
MSO4000 Series is the new mainstream digital scope to meet the customer’s applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. – Bandwidth 200MHz – Sample Rate Analog channel up to 4 GSa/s, Digital Channel up to 1 GSa/s(MSO) – Standard Memory depth: Analog channel up to 140 Mpts, Digital Channel up to 28 Mpts(MSO) – 2 Analog Channels, 16 Digital channels(MSO) – Waveform capture rate Up to 110,000 waveforms per second, – Real Time Waveform Record, Replay & Analysis(Std. up to 200,000 frames) – Lower noise floor, the Min. vertical sensitivity is 1mV/div – Innovative “UltraVision” technology – A variety of Trigger functions – Support serial bus trigger(Std.) and decoding(Opt.) for both analog and digital channels – Complete Connectivity: USB Host& Device, LAN(LXI-C), VGA, AUX,USB-GPIB(Opt.) – 9 inch WVGA(800X480), 256 level intensity grading display -
GPIB INTERFACE MODULE
HP-Agilent/Keysight N2757A
AGILENT N2757A – GPIB INTERFACE MODULE N2757A is a GPIB interface module for fast data transfers. If you need fast data transfers, equip your 5462X oscilloscope with GPIB communication. Keysight offers the N2757A GPIB interface module to provide a GPIB port for your oscilloscope.
-
Power Supply
HP-Agilent/Keysight E3614A
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 48W, single output E3614A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. – Range 1: 0 to 8 V, 0 to 6 A. – Range 2: NA. – Power (max): 48 W. – Voltage rms: 200 µV. – Peak-to-Peak: 1 mV. – 0.01% + 2 mV. – Voltage: 10 mV. – Current: 10 mA. 48W, 8V, 6A
-
Video Measurement System
ROHDE & SCHWARZ VSA Video Measurement System 2013.6057.03
Video Measurement System VSA from R&S combines the functions of a video analyzer, vectorscope, oscilloscope, monitor and controller (PC) in a 19″ desktop.
◆ Video and FFT analyzer
◆ 3-channel oscilloscope
◆ Vectorscope
◆ Monitor
◆ Four video-signal inputs with 9 MHz bandwidth
◆ High-contrast color LCD
◆ Convenient menu-driven user interface
◆ In labs and service centers
◆ In automatic measuring and monitoring systems
◆ In production and quality assurance of video equipment.The great versatility of the VideoMeasurement System ¸VSA makes it suitable for a wide range of applications.
Users in both laboratory and service environments will value the comprehensive measurement capabilities as well as the high operating convenience of the integrated instruments.
The integrated PC makes the VSA ideal for use as an automatic test and monitoring system, e.g. for TV transmitters or cable networks. No external controller is required for system
control.An integrated hard disk allows a large number of measurement results and graphics to be stored for later evaluation. This is a great advantage especially for mobile applications.
In the production of video equipmentthe VSA cannot be beaten for its high measurement speed. Results are computed virtually in realtime even if long test reports are called for, and this considerably reduces time and costs.
Datasheet -
Network Analyzer
HP/Agilent-Keysight 8753D
The HP 8753D is a vector network analyzer and it offers even more flexibility and measurement capability than the HP 8752C in the following areas:
* Frequency range from 30 kHz to 3 GHz.
* Built-in S-parameter test set provides complete forward and reverse measurements, allowing you to completely characterize your component with a single connection.
* 50 and 75 ohm solutions.
* Superb accuracy. The most comprehensive calibration available guarantees accurate measurements. TRL**nRMt makes calibration in non-coaxial environments easier and more convenient.
* Mixer testing. Quickly and easily characterize frequency translating devices such as mixers.
* Add swept harmonic measurements. Characterize amplifter parameters – gain, 1 dB compression, match – and 2nd and 3rd harmonic distortion with the same test setup.
* Built-in 3.5 inch floppy disk drive provides convenient storage of instrument states and data.
* Parallel and serial ports provide interfaces to popular printers and plotters. The parallel port can also be used as a general U0 bus, with user-controllable TI'L inputs and outputs. Users can also connect a DIN keyboard to speed up entry of titles, labels, or file names, and for remote hnt panel operation.Two excellent choices, the HP 8752C and HP 8753D continue the tradition of affordable excellence in RF component measurements for the lab and production test areas. The HP 8752C and HP 8753D network analyzers bring superior performance and useful productivity features to simplify and speed your device, component, or network measurements in the 30 kHz to 6 GHz frequency range. A swept synthesized source, sensitive receiver, and crisp color display ensure rapid, accurate, and easy-to-read test results. Since the HP 8752C and HP 8753D are vector network analyzers, they not only provide magnitude and phase information, but also offer up to 1 10 dB dynamic range, make group delay and time domain measurements, and utilize vector accuracy enhancement to minimize measurement uncertainty.
Datasheet -
Power Source / Power Analyzer
HP-Agilent/Keysight 85901A
The Keysight 85901A Portable AC Power Source works with your test equipment to provide the power you need, where you need it. The power source is small, with a briefcase handle that makes it easy to carry and it fits into tight spots. You can use the built-in battery of the power source or connect it to an external 12 Vdc source for even longer operation.
200 Watts continuous output
115 Vrms or 230 Vrms output
Internal battery or external 12 Vdc source
Built-in charger
Up to 2 hour operation of Keysight 8590 Series Spectrum Analyzers
Easy to carry
Datasheet -
Cable
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 2m
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – COLOR BLACK SMA M- SMA M 2m
e ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.
The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
Datasheet
-
Test Set
HP-Agilent/Keysight 85046A
The Agilent 85046A test set provides the capability to simultaneously measure the transmission and reflection characteristics of 50 ohm devices. The test set is controlled from the analyzer and includes programmable step attenuators. It can be used with the Agilent 8753A/B/C, 8753D/E/ES Option 011, 4395, 4396 and selected 8702 lightwave component analyzer configurations. – Provides the capability to measure reflection and transmission characteristics (including S-parameters) of two-port devices in either direction with a single connection. – Includes a programmable step attenuator – Frequency range 300 kHz to 3 GHz – Contains precision 7 mm connectors
-
Oscilloscope 2 channels
Rigol MSO4022
200 MHz, 2 channel, 4 GS/s
MSO4000 Series is the new mainstream digital scope to meet the customer’s applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. – Bandwidth 200MHz – Sample Rate Analog channel up to 4 GSa/s, Digital Channel up to 1 GSa/s(MSO) – Standard Memory depth: Analog channel up to 140 Mpts, Digital Channel up to 28 Mpts(MSO) – 2 Analog Channels, 16 Digital channels(MSO) – Waveform capture rate Up to 110,000 waveforms per second, – Real Time Waveform Record, Replay & Analysis(Std. up to 200,000 frames) – Lower noise floor, the Min. vertical sensitivity is 1mV/div – Innovative “UltraVision” technology – A variety of Trigger functions – Support serial bus trigger(Std.) and decoding(Opt.) for both analog and digital channels – Complete Connectivity: USB Host& Device, LAN(LXI-C), VGA, AUX,USB-GPIB(Opt.) – 9 inch WVGA(800X480), 256 level intensity grading display -
GPIB INTERFACE MODULE
HP-Agilent/Keysight N2757A
AGILENT N2757A – GPIB INTERFACE MODULE N2757A is a GPIB interface module for fast data transfers. If you need fast data transfers, equip your 5462X oscilloscope with GPIB communication. Keysight offers the N2757A GPIB interface module to provide a GPIB port for your oscilloscope.
-
Power Supply
HP-Agilent/Keysight E3614A
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 48W, single output E3614A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. – Range 1: 0 to 8 V, 0 to 6 A. – Range 2: NA. – Power (max): 48 W. – Voltage rms: 200 µV. – Peak-to-Peak: 1 mV. – 0.01% + 2 mV. – Voltage: 10 mV. – Current: 10 mA. 48W, 8V, 6A
-
Video Measurement System
ROHDE & SCHWARZ VSA Video Measurement System 2013.6057.03
Video Measurement System VSA from R&S combines the functions of a video analyzer, vectorscope, oscilloscope, monitor and controller (PC) in a 19″ desktop.
◆ Video and FFT analyzer
◆ 3-channel oscilloscope
◆ Vectorscope
◆ Monitor
◆ Four video-signal inputs with 9 MHz bandwidth
◆ High-contrast color LCD
◆ Convenient menu-driven user interface
◆ In labs and service centers
◆ In automatic measuring and monitoring systems
◆ In production and quality assurance of video equipment.The great versatility of the VideoMeasurement System ¸VSA makes it suitable for a wide range of applications.
Users in both laboratory and service environments will value the comprehensive measurement capabilities as well as the high operating convenience of the integrated instruments.
The integrated PC makes the VSA ideal for use as an automatic test and monitoring system, e.g. for TV transmitters or cable networks. No external controller is required for system
control.An integrated hard disk allows a large number of measurement results and graphics to be stored for later evaluation. This is a great advantage especially for mobile applications.
In the production of video equipmentthe VSA cannot be beaten for its high measurement speed. Results are computed virtually in realtime even if long test reports are called for, and this considerably reduces time and costs.
Datasheet -
Network Analyzer
HP/Agilent-Keysight 8753D
The HP 8753D is a vector network analyzer and it offers even more flexibility and measurement capability than the HP 8752C in the following areas:
* Frequency range from 30 kHz to 3 GHz.
* Built-in S-parameter test set provides complete forward and reverse measurements, allowing you to completely characterize your component with a single connection.
* 50 and 75 ohm solutions.
* Superb accuracy. The most comprehensive calibration available guarantees accurate measurements. TRL**nRMt makes calibration in non-coaxial environments easier and more convenient.
* Mixer testing. Quickly and easily characterize frequency translating devices such as mixers.
* Add swept harmonic measurements. Characterize amplifter parameters – gain, 1 dB compression, match – and 2nd and 3rd harmonic distortion with the same test setup.
* Built-in 3.5 inch floppy disk drive provides convenient storage of instrument states and data.
* Parallel and serial ports provide interfaces to popular printers and plotters. The parallel port can also be used as a general U0 bus, with user-controllable TI'L inputs and outputs. Users can also connect a DIN keyboard to speed up entry of titles, labels, or file names, and for remote hnt panel operation.Two excellent choices, the HP 8752C and HP 8753D continue the tradition of affordable excellence in RF component measurements for the lab and production test areas. The HP 8752C and HP 8753D network analyzers bring superior performance and useful productivity features to simplify and speed your device, component, or network measurements in the 30 kHz to 6 GHz frequency range. A swept synthesized source, sensitive receiver, and crisp color display ensure rapid, accurate, and easy-to-read test results. Since the HP 8752C and HP 8753D are vector network analyzers, they not only provide magnitude and phase information, but also offer up to 1 10 dB dynamic range, make group delay and time domain measurements, and utilize vector accuracy enhancement to minimize measurement uncertainty.
Datasheet -
Power Source / Power Analyzer
HP-Agilent/Keysight 85901A
The Keysight 85901A Portable AC Power Source works with your test equipment to provide the power you need, where you need it. The power source is small, with a briefcase handle that makes it easy to carry and it fits into tight spots. You can use the built-in battery of the power source or connect it to an external 12 Vdc source for even longer operation.
200 Watts continuous output
115 Vrms or 230 Vrms output
Internal battery or external 12 Vdc source
Built-in charger
Up to 2 hour operation of Keysight 8590 Series Spectrum Analyzers
Easy to carry
Datasheet -
Cable
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 2m
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – COLOR BLACK SMA M- SMA M 2m
e ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.
The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
Datasheet