ItalianoShop
Showing 661–690 of 1386 results
-
Power Sensor
AGILENT-Hp/Keysight 8481A
HP AGILENT KEYSIGHT POWER SENSOR 8481A 10 MHz to 18 GHz
The 8481A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM Series, EPM-P Series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters.
8481A offers extraordinary precision, stability and lower SWR.
• Excellent SWR to reduce mismatch uncertainty
• Accurately calibrated and traceable to the US National Institute of Standards and Technology (NIST).
• Compatible with EPM, EPM-P, and P Series power meters, as well as E1416A VXI and discontinued 70100A and 43X power switches
• Accurate average power measurements over -30 to +20 dBm
• Frequency range from 10 MHz to 18 GHz
• Element sensitive to the power of the thermocouple
• Measurement range: 1 µW to 100 mW (-30 dBm to +20 dBm)
• impedance 50 ohm
• Connector N (m)SKU: n/a -
Scalar Network Analyzer
HP-Agilent/Keysight 8757A
Measure insertion loss or gain, return loss, SWR, power quickly and accurately with the new HP 8757A Scalar Network Analyzer. With high perforamance detectors and directional bridges and a companion HP source and digital plotter, the HP 8757A becomes the basis of a complete measurement system with superb performance.
-76 dB dynamic range
– Accurate swept power measurement (dBm)
– 40 dB directivity bridges
-Four independant display channels
-Limit testing built in
– Save/recall setup and cal data
-Direct plotter output
DatasheetSKU: n/a -
Spectrum Analyzer
HP-Agilent/Keysight E4401B
The ESA-E Series is Agilent's mid-performance spectrum analyzer solution for the future. The series sets the performance standards in measurement speed, dynamic range, accuracy, and resolving power for similarly priced products. Its flexible platform design enables R&D, manufacturing, and field service engineers to customize the product to meet specific testing needs and to upgrade the product with new features when required.
The products' selection of one button measurement solutions combined with its easily navigable user interface and performance in speed allows engineers to spend less time testing and more time designing, building, and trouble shooting components and products.
Features
Frequency Range: 1 MHz to 1.5 GH
Remotely view and control the ESA over the Internet
8590-Series Programming Code Compatibility
Multiformat RF power measurement suite
Free IntuiLink PC software for screen and data transfer
Fault Location, Phase Noise, and CATV Service measurement personalities
Rugged and portable for lab grade performance in the field
Segmented sweep for up to 32 discontinuous spans in one sweep
One-millisecond RF sweep time, 50 measurements per second
Rugged lab grade performance for the field
±1 dB overall amplitude accuracy
Optional 10 Hz digital resolution bandwidth filter and preamplifier
-154 dBm sensitivity with preamp, +13.5 dBm TOI
Variable sweep (trace points) from 2 to 8192
DatasheetSKU: 87 -
Oscilloscope 4 channles
Rigol DS6064
DSO with 600MHz bandwidth and 5GSa/s
The Rigol DS6064 is a very high quality four channel digital storage oscilloscope. It offers up to 5GSa/s real-time sample rate and up to 600MHz bandwidth. These high performances ensure not only to capture real-time instantaneous signal, but also to observe details of repeated signal. DS6064 have up to 120.000 wfms/s refresh rate, which enable users to capture instantaneous signal and abnormal signal more quickly, to enhance waveform capturing ability, and to expedite circuit debug course. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Other advantages: 10.1″ color LCD, bright and vivid waveform display- versatile trigger modes: i.e. slope, alternative, rise&fall edge, enable users to stabilize signal more easily. In economical oscilloscope field, DS6064 have no doubt the highest performances, the most functions thus should be engineers’ best choice. Delivery including 4 probes (bandwidth 600MHz), USB cable, pc software, power adapter and manual. General Data Digital Oscilloscope Digital Oscilloscope Rigol DS6064 Display 10,1″ WVGA-Color-LCD Resolution 800 x 480 Pixel Interface 2x USB-host for i.e. USB sticks USB-Device for a PC connection or USB Pict-Bridge printerinterface LAN for network connectivity (LXI compilant) GPIB (IEE-488, General Purpose Interface Bus) using the optional USB-GPIB Module Trigger- and Calibrationoutput 10MHz reference clock In-/Out VGA interface to connect to an external monitor or projector Size in clarification Weight in clarification Supported operation systems in clarification Oscilloscope Functions Oscilloscope Functions Digital Oscilloscope Rigol DS6064 Channels 4 Real-time sample rate 5 GSa/s realtime Bandwidth 600 MHz Sampling Modus Normal, average, peak detect Mathematics userdefined, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal Bus Decoding I²C, RS232, SPI, USB, CAN and FlexRay Signal Digital Oscilloscope Rigol DS6064 Input DC/AC coupling, up to 300 Vrms CAT I Real-time sample rate up to 5 GSa/s realtime Time base in clarification Memory 140Mpts (1 Channel) Filter Hardware LPF, HPF, BPF and BRF Vertical Digital Oscilloscope Rigol DS6064 Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) in clarification Displacement range in clarification Trigger Digital Oscilloscope Rigol DS6064 Trigger in clarification Signal system and line/field frequency (Video triggering mode) in clarification Triggerfunctions Edge, Pattern, Glitch, Puls width, Sequence, Slew rate, I²C, RS232/UART, CAN, FlexRay, USB, SPI, Video Measurement Digital Oscilloscope Rigol DS6064 Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Delay1-2 (rise), Delay1-2(fall)SKU: 162 -
Termocamera
Flir E60
A seconda del modello di termocamera della FLIR Serie E, la capacità di risoluzione massima IR è di 320×240 pixels. Queste termocamere sono ideali per la manutenzione predittiva e le ispezioni programmate di impianti elettrici e sistemi meccanici, per assicurarne il corretto funzionamento con la massima efficienza e sicurezza e con il minimo consumo energetico.
– Risoluzione massima di 320 x 240 pixels A seconda del modello di termocamera FLIR Serie E, la risoluzione delle immagini IR va da 160×120 pixels a 320×240 pixels.
– Piccole ed ultraleggere I modelli FLIR Serie E pesano solo 825gr e possono essere facilmente trasportati all’interno del loro fodero. – Estremamente robusta Le termocamere FLIR Serie E sopportano cadute da due metri. Sono a norma IP54.
– Fotocamera di alta qualità Le termocamere FLIR Serie E sono dotate di fotocamera digitale integrata che rende le ispezioni più semplici e veloci.
– Galleria immagini Permette di accedere facilmente alle immagini salvate e selezionare quella desiderata.
– Precisione ± 2% Accuratezza ±2 °C o ±2% della lettura. – LCD touch screen Ampio LCD touch screen a colori da 3,5″.
– Illuminatore a LED incorporato Le termocamere FLIR Serie E sono dotate di illuminatore a LED incorporato che assicura un’alta qualità delle immagini nel visibile, indipendentemente dalla luminosità dell’ambiente di lavoro. – Batteria a lunga durata La batteria al litio ha un’autonomia di 4 ore, è facilmente sostituibile sul posto e vi permetterà di mantenere gli impegni programmati.
– Puntatore laser Un pulsante ergonomico attiva il puntatore laser che consente di associare il punto caldo/freddo nell’immagine IR con la posizione fisica dell’oggetto reale nel campo.
– FLIR Picture-in-Picture Utilizzando la funzione FLIR Picture-in-Picture, è estremamente semplice localizzare ed evidenziare le aree di interesse.
– FLIR Thermal Fusion Fonde le immagini visive e quelle ad infrarossi per consentire un’analisi migliore.
– Report immediati Creazione immediata di report direttamente nella termocamera, facilmente copiabili su USB. (FLIR E60) – Annotazioni di testo e commenti vocali Le annotazioni di testo possono essere prese da un elenco predefinito o inserite tramite touch screen. Per i commenti vocali, è possibile collegare una cuffia. – Lenti intercambiabili Per poter utilizzare le termocamere ad infrarossi FLIR Serie E in qualsiasi situazione, sono disponibili la lente grandangolare e il teleobiettivo. – WiFi Connessione a smartphone o tablet tramite Wi-Fi, con l’applicazione FLIR Tools mobile app (Apple iOS e Android) per la gestione e la condivisione dei risultati, oltre che per il controllo remoto.SKU: 238 -
Signal Generator
Rigol DSG3060
The DSG3060 RF signal generator offers standard AM/FM/ØM analog modulation, as well as options for I/Q modulation and I/Q baseband output with a maximum frequency 6 GHz. Featuring a high signal purity with phase noise measuring <-110 dBc/Hz @ 20 kHz (typical) and a wide output range of -130 dBm to +13 dBm, the DSG3000 RF signal generator has standard pulse modulation with an on/off ratio of up to 80dB, with optional pulse train generator available. The DSG3000 series also has an amplitude accuracy of < 0.5 dB (typical). Beside the analog output the devices include a USB-Host- and a USB-device and a LAN interface. The DSG3000 series is a high-performance RF signal generator. It provides comprehensive modulation solutions such as: Pulse modulation with customizable pulse train and I/Q modulation (optional) and standard AM/FM/FM analog modulation. All modulation schemes support internal and external modulation sources. In addition, to meet the demands of production environments, the DSG3000 is designed to be both, highly stable and reliable. The DSG3000 series also features a clear user interface, small size and light weight. It is easy to operate and can output stable, precise and pure signals. It is an ideal tool for various fields such as communication, computers, instrumentation, R&D, education, production and maintenance. * Highest frequency: 3 GHz/6 GHz * Amplitude accuracy: < 0.5 dB (typical) * Output amplitude range: -130 dBm to +13 dBm * High signal purity, phase noise: < -110 dBc/Hz @ 20 kHz (typical) * Standard 0.5 ppm internal clock; 5 ppb high stable clock for option * Standard AM/FM/ΦM analog modulation * Standard pulse modulation; on/off ratio up to 80 dB; pulse train generator (optional) * I/Q modulation and I/Q baseband output * All modulationschemes support internal and external modulation modes * Standard 2U height design to save rack space. Rack mount kit is available * Standard USB/LAN/GPIB remote control interfaces. SCPI command set for remote control * Wear-free electronic attenuator design * Well-designed automatic flatness calibration function (Cables, attenuators, amplifiers and so on) for test systems with power meter control
SKU: 743
-
Power Sensor
AGILENT-Hp/Keysight 8481A
HP AGILENT KEYSIGHT POWER SENSOR 8481A 10 MHz to 18 GHz
The 8481A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM Series, EPM-P Series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters.
8481A offers extraordinary precision, stability and lower SWR.
• Excellent SWR to reduce mismatch uncertainty
• Accurately calibrated and traceable to the US National Institute of Standards and Technology (NIST).
• Compatible with EPM, EPM-P, and P Series power meters, as well as E1416A VXI and discontinued 70100A and 43X power switches
• Accurate average power measurements over -30 to +20 dBm
• Frequency range from 10 MHz to 18 GHz
• Element sensitive to the power of the thermocouple
• Measurement range: 1 µW to 100 mW (-30 dBm to +20 dBm)
• impedance 50 ohm
• Connector N (m) -
Scalar Network Analyzer
HP-Agilent/Keysight 8757A
Measure insertion loss or gain, return loss, SWR, power quickly and accurately with the new HP 8757A Scalar Network Analyzer. With high perforamance detectors and directional bridges and a companion HP source and digital plotter, the HP 8757A becomes the basis of a complete measurement system with superb performance.
-76 dB dynamic range
– Accurate swept power measurement (dBm)
– 40 dB directivity bridges
-Four independant display channels
-Limit testing built in
– Save/recall setup and cal data
-Direct plotter output
Datasheet -
Spectrum Analyzer
HP-Agilent/Keysight E4401B
The ESA-E Series is Agilent's mid-performance spectrum analyzer solution for the future. The series sets the performance standards in measurement speed, dynamic range, accuracy, and resolving power for similarly priced products. Its flexible platform design enables R&D, manufacturing, and field service engineers to customize the product to meet specific testing needs and to upgrade the product with new features when required.
The products' selection of one button measurement solutions combined with its easily navigable user interface and performance in speed allows engineers to spend less time testing and more time designing, building, and trouble shooting components and products.
Features
Frequency Range: 1 MHz to 1.5 GH
Remotely view and control the ESA over the Internet
8590-Series Programming Code Compatibility
Multiformat RF power measurement suite
Free IntuiLink PC software for screen and data transfer
Fault Location, Phase Noise, and CATV Service measurement personalities
Rugged and portable for lab grade performance in the field
Segmented sweep for up to 32 discontinuous spans in one sweep
One-millisecond RF sweep time, 50 measurements per second
Rugged lab grade performance for the field
±1 dB overall amplitude accuracy
Optional 10 Hz digital resolution bandwidth filter and preamplifier
-154 dBm sensitivity with preamp, +13.5 dBm TOI
Variable sweep (trace points) from 2 to 8192
Datasheet -
Oscilloscope 4 channles
Rigol DS6064
DSO with 600MHz bandwidth and 5GSa/s
The Rigol DS6064 is a very high quality four channel digital storage oscilloscope. It offers up to 5GSa/s real-time sample rate and up to 600MHz bandwidth. These high performances ensure not only to capture real-time instantaneous signal, but also to observe details of repeated signal. DS6064 have up to 120.000 wfms/s refresh rate, which enable users to capture instantaneous signal and abnormal signal more quickly, to enhance waveform capturing ability, and to expedite circuit debug course. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Other advantages: 10.1″ color LCD, bright and vivid waveform display- versatile trigger modes: i.e. slope, alternative, rise&fall edge, enable users to stabilize signal more easily. In economical oscilloscope field, DS6064 have no doubt the highest performances, the most functions thus should be engineers’ best choice. Delivery including 4 probes (bandwidth 600MHz), USB cable, pc software, power adapter and manual. General Data Digital Oscilloscope Digital Oscilloscope Rigol DS6064 Display 10,1″ WVGA-Color-LCD Resolution 800 x 480 Pixel Interface 2x USB-host for i.e. USB sticks USB-Device for a PC connection or USB Pict-Bridge printerinterface LAN for network connectivity (LXI compilant) GPIB (IEE-488, General Purpose Interface Bus) using the optional USB-GPIB Module Trigger- and Calibrationoutput 10MHz reference clock In-/Out VGA interface to connect to an external monitor or projector Size in clarification Weight in clarification Supported operation systems in clarification Oscilloscope Functions Oscilloscope Functions Digital Oscilloscope Rigol DS6064 Channels 4 Real-time sample rate 5 GSa/s realtime Bandwidth 600 MHz Sampling Modus Normal, average, peak detect Mathematics userdefined, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal Bus Decoding I²C, RS232, SPI, USB, CAN and FlexRay Signal Digital Oscilloscope Rigol DS6064 Input DC/AC coupling, up to 300 Vrms CAT I Real-time sample rate up to 5 GSa/s realtime Time base in clarification Memory 140Mpts (1 Channel) Filter Hardware LPF, HPF, BPF and BRF Vertical Digital Oscilloscope Rigol DS6064 Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) in clarification Displacement range in clarification Trigger Digital Oscilloscope Rigol DS6064 Trigger in clarification Signal system and line/field frequency (Video triggering mode) in clarification Triggerfunctions Edge, Pattern, Glitch, Puls width, Sequence, Slew rate, I²C, RS232/UART, CAN, FlexRay, USB, SPI, Video Measurement Digital Oscilloscope Rigol DS6064 Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Delay1-2 (rise), Delay1-2(fall) -
Termocamera
Flir E60
A seconda del modello di termocamera della FLIR Serie E, la capacità di risoluzione massima IR è di 320×240 pixels. Queste termocamere sono ideali per la manutenzione predittiva e le ispezioni programmate di impianti elettrici e sistemi meccanici, per assicurarne il corretto funzionamento con la massima efficienza e sicurezza e con il minimo consumo energetico.
– Risoluzione massima di 320 x 240 pixels A seconda del modello di termocamera FLIR Serie E, la risoluzione delle immagini IR va da 160×120 pixels a 320×240 pixels.
– Piccole ed ultraleggere I modelli FLIR Serie E pesano solo 825gr e possono essere facilmente trasportati all’interno del loro fodero. – Estremamente robusta Le termocamere FLIR Serie E sopportano cadute da due metri. Sono a norma IP54.
– Fotocamera di alta qualità Le termocamere FLIR Serie E sono dotate di fotocamera digitale integrata che rende le ispezioni più semplici e veloci.
– Galleria immagini Permette di accedere facilmente alle immagini salvate e selezionare quella desiderata.
– Precisione ± 2% Accuratezza ±2 °C o ±2% della lettura. – LCD touch screen Ampio LCD touch screen a colori da 3,5″.
– Illuminatore a LED incorporato Le termocamere FLIR Serie E sono dotate di illuminatore a LED incorporato che assicura un’alta qualità delle immagini nel visibile, indipendentemente dalla luminosità dell’ambiente di lavoro. – Batteria a lunga durata La batteria al litio ha un’autonomia di 4 ore, è facilmente sostituibile sul posto e vi permetterà di mantenere gli impegni programmati.
– Puntatore laser Un pulsante ergonomico attiva il puntatore laser che consente di associare il punto caldo/freddo nell’immagine IR con la posizione fisica dell’oggetto reale nel campo.
– FLIR Picture-in-Picture Utilizzando la funzione FLIR Picture-in-Picture, è estremamente semplice localizzare ed evidenziare le aree di interesse.
– FLIR Thermal Fusion Fonde le immagini visive e quelle ad infrarossi per consentire un’analisi migliore.
– Report immediati Creazione immediata di report direttamente nella termocamera, facilmente copiabili su USB. (FLIR E60) – Annotazioni di testo e commenti vocali Le annotazioni di testo possono essere prese da un elenco predefinito o inserite tramite touch screen. Per i commenti vocali, è possibile collegare una cuffia. – Lenti intercambiabili Per poter utilizzare le termocamere ad infrarossi FLIR Serie E in qualsiasi situazione, sono disponibili la lente grandangolare e il teleobiettivo. – WiFi Connessione a smartphone o tablet tramite Wi-Fi, con l’applicazione FLIR Tools mobile app (Apple iOS e Android) per la gestione e la condivisione dei risultati, oltre che per il controllo remoto. -
Signal Generator
Rigol DSG3060
The DSG3060 RF signal generator offers standard AM/FM/ØM analog modulation, as well as options for I/Q modulation and I/Q baseband output with a maximum frequency 6 GHz. Featuring a high signal purity with phase noise measuring <-110 dBc/Hz @ 20 kHz (typical) and a wide output range of -130 dBm to +13 dBm, the DSG3000 RF signal generator has standard pulse modulation with an on/off ratio of up to 80dB, with optional pulse train generator available. The DSG3000 series also has an amplitude accuracy of < 0.5 dB (typical). Beside the analog output the devices include a USB-Host- and a USB-device and a LAN interface. The DSG3000 series is a high-performance RF signal generator. It provides comprehensive modulation solutions such as: Pulse modulation with customizable pulse train and I/Q modulation (optional) and standard AM/FM/FM analog modulation. All modulation schemes support internal and external modulation sources. In addition, to meet the demands of production environments, the DSG3000 is designed to be both, highly stable and reliable. The DSG3000 series also features a clear user interface, small size and light weight. It is easy to operate and can output stable, precise and pure signals. It is an ideal tool for various fields such as communication, computers, instrumentation, R&D, education, production and maintenance. * Highest frequency: 3 GHz/6 GHz * Amplitude accuracy: < 0.5 dB (typical) * Output amplitude range: -130 dBm to +13 dBm * High signal purity, phase noise: < -110 dBc/Hz @ 20 kHz (typical) * Standard 0.5 ppm internal clock; 5 ppb high stable clock for option * Standard AM/FM/ΦM analog modulation * Standard pulse modulation; on/off ratio up to 80 dB; pulse train generator (optional) * I/Q modulation and I/Q baseband output * All modulationschemes support internal and external modulation modes * Standard 2U height design to save rack space. Rack mount kit is available * Standard USB/LAN/GPIB remote control interfaces. SCPI command set for remote control * Wear-free electronic attenuator design * Well-designed automatic flatness calibration function (Cables, attenuators, amplifiers and so on) for test systems with power meter control
-
Power Sensor
AGILENT-Hp/Keysight 8481A
HP AGILENT KEYSIGHT POWER SENSOR 8481A 10 MHz to 18 GHz
The 8481A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM Series, EPM-P Series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters.
8481A offers extraordinary precision, stability and lower SWR.
• Excellent SWR to reduce mismatch uncertainty
• Accurately calibrated and traceable to the US National Institute of Standards and Technology (NIST).
• Compatible with EPM, EPM-P, and P Series power meters, as well as E1416A VXI and discontinued 70100A and 43X power switches
• Accurate average power measurements over -30 to +20 dBm
• Frequency range from 10 MHz to 18 GHz
• Element sensitive to the power of the thermocouple
• Measurement range: 1 µW to 100 mW (-30 dBm to +20 dBm)
• impedance 50 ohm
• Connector N (m) -
Scalar Network Analyzer
HP-Agilent/Keysight 8757A
Measure insertion loss or gain, return loss, SWR, power quickly and accurately with the new HP 8757A Scalar Network Analyzer. With high perforamance detectors and directional bridges and a companion HP source and digital plotter, the HP 8757A becomes the basis of a complete measurement system with superb performance.
-76 dB dynamic range
– Accurate swept power measurement (dBm)
– 40 dB directivity bridges
-Four independant display channels
-Limit testing built in
– Save/recall setup and cal data
-Direct plotter output
Datasheet -
Spectrum Analyzer
HP-Agilent/Keysight E4401B
The ESA-E Series is Agilent's mid-performance spectrum analyzer solution for the future. The series sets the performance standards in measurement speed, dynamic range, accuracy, and resolving power for similarly priced products. Its flexible platform design enables R&D, manufacturing, and field service engineers to customize the product to meet specific testing needs and to upgrade the product with new features when required.
The products' selection of one button measurement solutions combined with its easily navigable user interface and performance in speed allows engineers to spend less time testing and more time designing, building, and trouble shooting components and products.
Features
Frequency Range: 1 MHz to 1.5 GH
Remotely view and control the ESA over the Internet
8590-Series Programming Code Compatibility
Multiformat RF power measurement suite
Free IntuiLink PC software for screen and data transfer
Fault Location, Phase Noise, and CATV Service measurement personalities
Rugged and portable for lab grade performance in the field
Segmented sweep for up to 32 discontinuous spans in one sweep
One-millisecond RF sweep time, 50 measurements per second
Rugged lab grade performance for the field
±1 dB overall amplitude accuracy
Optional 10 Hz digital resolution bandwidth filter and preamplifier
-154 dBm sensitivity with preamp, +13.5 dBm TOI
Variable sweep (trace points) from 2 to 8192
Datasheet -
Oscilloscope 4 channles
Rigol DS6064
DSO with 600MHz bandwidth and 5GSa/s
The Rigol DS6064 is a very high quality four channel digital storage oscilloscope. It offers up to 5GSa/s real-time sample rate and up to 600MHz bandwidth. These high performances ensure not only to capture real-time instantaneous signal, but also to observe details of repeated signal. DS6064 have up to 120.000 wfms/s refresh rate, which enable users to capture instantaneous signal and abnormal signal more quickly, to enhance waveform capturing ability, and to expedite circuit debug course. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Other advantages: 10.1″ color LCD, bright and vivid waveform display- versatile trigger modes: i.e. slope, alternative, rise&fall edge, enable users to stabilize signal more easily. In economical oscilloscope field, DS6064 have no doubt the highest performances, the most functions thus should be engineers’ best choice. Delivery including 4 probes (bandwidth 600MHz), USB cable, pc software, power adapter and manual. General Data Digital Oscilloscope Digital Oscilloscope Rigol DS6064 Display 10,1″ WVGA-Color-LCD Resolution 800 x 480 Pixel Interface 2x USB-host for i.e. USB sticks USB-Device for a PC connection or USB Pict-Bridge printerinterface LAN for network connectivity (LXI compilant) GPIB (IEE-488, General Purpose Interface Bus) using the optional USB-GPIB Module Trigger- and Calibrationoutput 10MHz reference clock In-/Out VGA interface to connect to an external monitor or projector Size in clarification Weight in clarification Supported operation systems in clarification Oscilloscope Functions Oscilloscope Functions Digital Oscilloscope Rigol DS6064 Channels 4 Real-time sample rate 5 GSa/s realtime Bandwidth 600 MHz Sampling Modus Normal, average, peak detect Mathematics userdefined, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal Bus Decoding I²C, RS232, SPI, USB, CAN and FlexRay Signal Digital Oscilloscope Rigol DS6064 Input DC/AC coupling, up to 300 Vrms CAT I Real-time sample rate up to 5 GSa/s realtime Time base in clarification Memory 140Mpts (1 Channel) Filter Hardware LPF, HPF, BPF and BRF Vertical Digital Oscilloscope Rigol DS6064 Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) in clarification Displacement range in clarification Trigger Digital Oscilloscope Rigol DS6064 Trigger in clarification Signal system and line/field frequency (Video triggering mode) in clarification Triggerfunctions Edge, Pattern, Glitch, Puls width, Sequence, Slew rate, I²C, RS232/UART, CAN, FlexRay, USB, SPI, Video Measurement Digital Oscilloscope Rigol DS6064 Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Delay1-2 (rise), Delay1-2(fall) -
Termocamera
Flir E60
A seconda del modello di termocamera della FLIR Serie E, la capacità di risoluzione massima IR è di 320×240 pixels. Queste termocamere sono ideali per la manutenzione predittiva e le ispezioni programmate di impianti elettrici e sistemi meccanici, per assicurarne il corretto funzionamento con la massima efficienza e sicurezza e con il minimo consumo energetico.
– Risoluzione massima di 320 x 240 pixels A seconda del modello di termocamera FLIR Serie E, la risoluzione delle immagini IR va da 160×120 pixels a 320×240 pixels.
– Piccole ed ultraleggere I modelli FLIR Serie E pesano solo 825gr e possono essere facilmente trasportati all’interno del loro fodero. – Estremamente robusta Le termocamere FLIR Serie E sopportano cadute da due metri. Sono a norma IP54.
– Fotocamera di alta qualità Le termocamere FLIR Serie E sono dotate di fotocamera digitale integrata che rende le ispezioni più semplici e veloci.
– Galleria immagini Permette di accedere facilmente alle immagini salvate e selezionare quella desiderata.
– Precisione ± 2% Accuratezza ±2 °C o ±2% della lettura. – LCD touch screen Ampio LCD touch screen a colori da 3,5″.
– Illuminatore a LED incorporato Le termocamere FLIR Serie E sono dotate di illuminatore a LED incorporato che assicura un’alta qualità delle immagini nel visibile, indipendentemente dalla luminosità dell’ambiente di lavoro. – Batteria a lunga durata La batteria al litio ha un’autonomia di 4 ore, è facilmente sostituibile sul posto e vi permetterà di mantenere gli impegni programmati.
– Puntatore laser Un pulsante ergonomico attiva il puntatore laser che consente di associare il punto caldo/freddo nell’immagine IR con la posizione fisica dell’oggetto reale nel campo.
– FLIR Picture-in-Picture Utilizzando la funzione FLIR Picture-in-Picture, è estremamente semplice localizzare ed evidenziare le aree di interesse.
– FLIR Thermal Fusion Fonde le immagini visive e quelle ad infrarossi per consentire un’analisi migliore.
– Report immediati Creazione immediata di report direttamente nella termocamera, facilmente copiabili su USB. (FLIR E60) – Annotazioni di testo e commenti vocali Le annotazioni di testo possono essere prese da un elenco predefinito o inserite tramite touch screen. Per i commenti vocali, è possibile collegare una cuffia. – Lenti intercambiabili Per poter utilizzare le termocamere ad infrarossi FLIR Serie E in qualsiasi situazione, sono disponibili la lente grandangolare e il teleobiettivo. – WiFi Connessione a smartphone o tablet tramite Wi-Fi, con l’applicazione FLIR Tools mobile app (Apple iOS e Android) per la gestione e la condivisione dei risultati, oltre che per il controllo remoto. -
Signal Generator
Rigol DSG3060
The DSG3060 RF signal generator offers standard AM/FM/ØM analog modulation, as well as options for I/Q modulation and I/Q baseband output with a maximum frequency 6 GHz. Featuring a high signal purity with phase noise measuring <-110 dBc/Hz @ 20 kHz (typical) and a wide output range of -130 dBm to +13 dBm, the DSG3000 RF signal generator has standard pulse modulation with an on/off ratio of up to 80dB, with optional pulse train generator available. The DSG3000 series also has an amplitude accuracy of < 0.5 dB (typical). Beside the analog output the devices include a USB-Host- and a USB-device and a LAN interface. The DSG3000 series is a high-performance RF signal generator. It provides comprehensive modulation solutions such as: Pulse modulation with customizable pulse train and I/Q modulation (optional) and standard AM/FM/FM analog modulation. All modulation schemes support internal and external modulation sources. In addition, to meet the demands of production environments, the DSG3000 is designed to be both, highly stable and reliable. The DSG3000 series also features a clear user interface, small size and light weight. It is easy to operate and can output stable, precise and pure signals. It is an ideal tool for various fields such as communication, computers, instrumentation, R&D, education, production and maintenance. * Highest frequency: 3 GHz/6 GHz * Amplitude accuracy: < 0.5 dB (typical) * Output amplitude range: -130 dBm to +13 dBm * High signal purity, phase noise: < -110 dBc/Hz @ 20 kHz (typical) * Standard 0.5 ppm internal clock; 5 ppb high stable clock for option * Standard AM/FM/ΦM analog modulation * Standard pulse modulation; on/off ratio up to 80 dB; pulse train generator (optional) * I/Q modulation and I/Q baseband output * All modulationschemes support internal and external modulation modes * Standard 2U height design to save rack space. Rack mount kit is available * Standard USB/LAN/GPIB remote control interfaces. SCPI command set for remote control * Wear-free electronic attenuator design * Well-designed automatic flatness calibration function (Cables, attenuators, amplifiers and so on) for test systems with power meter control