ItalianoShop
Showing 121–150 of 1741 results
-
AGILENT-Hp/Keysight E1439C
The Keysight 1439C/D is ideal for applications in RF signal acquisition, analysis and high resolution ATE. It has a baseband input and a 70 MHz IF input, both with 36 MHz bandwidth. The single-channel 95 MSa/s digitizer combines exceptional spurious-free dynamic range with alias-protected signal conditioning, center-frequency tunable digital filters, and a large signal capture memory, all in a single-wide C-size VXI module. The E1439D also incorporates a 200 MB/sec FPDP (Front Panel Data Port) capable of carrying full bandwidth data out of the module for analysis or storage.
36 MHz input bandwidth centered at 70 MHz
-90 dBfs spurious-free dynamic range
Anti-alias filter and signal conditioning
18MB RAM FIFO memory (expandable to 1.2 GB)
VXIbus outputs
VXI local bus (E1439D only)
Multi-channel compatible
VXI plug&play compatible
Single-slot, C-size module
DatasheetSKU: n/a -
Diff Solder-in Probe Head
AGILENT-HP/Keysight E2677A
DIFF SOLDER-IN PROBE HEAD
Bandwidth:12 GHz specified
12.5 GHz typicalConnectivity:
Low loading, different input capacitance < = 270 fF Reliable, semi-permanent connection 4” lead length for reaching into tight spaces such as DIMM socket E2677A InfiniiMax differential solder-in probe head and accessories includes 20 full bandwidth and 10 medium bandwidth damping resistors. Features: 12 GHz specified bandwidth, 12.5 GHz typical bandwidth Low loading, different input capaicitance < = 270 fF Reliable semi-permanent connection 4” lead length for reaching into tight spaces such as a DIMM socket Variable span of leads from 0.2 – 3.3 mm (8 to 130 mils)
SKU: n/a -
Probe
AGILENT-HP/Keysight E2679A
SINGLE – ENDED SOLDER PROBE HEAD
Original packaging:
Qty. 8 01131-81506 Mini Axial Resistor 0ohm
Qty. 2 01131-94308 150Ohm Resistor Template
Qty. 24 01131-81504 Mini Axial Resisotr 0ohm
Qty. 2 01131-94311 91Ohm Resistor Template
Qty 16 01131-81510 Mini Axial Resistor 91ohmBandwidth:
≤6 GHz input
Connectivity:
Low loading, different input capacitance < = 270 fF Reliable, semi-permanent connection 4” lead length for reaching into tight spaces such as DIMM socket InfiniiMax single-ended solder-in probe head and accessories. Includes 16 full bandwidth and 8 medium bandwidth damping resistors and 24 zero ohm ground resistors.
SKU: n/a -
Power Supply
AGILENT-Hp/Keysight E3631A
Output Ratings
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 AProgramming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mARipple and Noise (20 Hz to 20 MHz)
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Readback Accuracy at 25°C ±5°C Voltage: 0.05% + 10 mV, 0.05% + 10 mV, 0.1% + 5 mV Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA Keysight basic DC power supplies offer essential features for a tight budget. The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package. Datasheet
SKU: n/a -
Power Supply
AGILENT-Hp/Keysight E3646A
The Agilent E3646A 60-watt dual-output programmable power supply features built-in GPIB and RS-232 connectivity and SCPI language compatibility making it easy to create flexible power programs. For general-purpose use, this programmable power supply offers the performance of a system power supply at a surprisingly affordable price.
E364X: Basic System Power
The Agilent E3640A – E3649A power supplies fill the gap between manual bench power supplies and high performance system supplies, offering unmatched performance and functionality at a great price. They’re designed for moderate-speed test where automation is important and throughput is not critical. These single- and dual-output, dual range power supplies are ideal for contract manufacturers and OEMs who need to perform basic electronic functional tests on a variety of products quickly and economically.All models support GPIB and RS-232 for quick connectivity. SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. Less than 90 ms output settling time keeps throughput high without the need for a down programmer. Up to five store/recall states help minimize programming time while accelerating test. Remote sensing capability ensures output stability with longer leads.
Great Performance, Outstanding Price
With 30 to 100W of output power, the Agilent E364xA-series of programmable dc power supplies provides great performance at a great price. All ten models deliver clean power, dependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They’re designed to meet the needs of R&D design verification, production testing, QA verifications and other demanding applications with Agilent Technologies’ quality and reliability.Steady Output
With 0.01 percent load and line regulation, Agilent E364xA power supplies keep output steady when power line and load changes occur. They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Agilent E364xA power supplies specify less than 90 msec of voltage settling time at any output load condition.Remote Interface
Agilent E364xA power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232. Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well.Broad Support
VXIplug&play software drivers are available for Agilent VEE and National Instruments LabView™ and LabWindows™, simplifying integration of the E364xA into your test system. The drivers are supported under Microsoft® Windows 98 ® and NT. ®Front Panel Operation
An easy-to-use rotary knob and self-guiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of 10 mV/1 mA from the front panel. Up to five complete powers supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously.
DatasheetSKU: 895 -
Power Supply
AGILENT-Hp/Keysight N5748A
Output Ratings
Voltage: 80 V
Current: 9.5 A
Power: 760 WThe single output, 760W N5748A, provides universal AC input, GPIB, LAN, USB, LXI compliance, and analog/resistance control of output voltage and current. It delivers reliable performance and enhanced capabilities in a compact 1U package.
SKU: n/a -
Precision DC Power Module
AGILENT-HP/Keysight N6732B
The Keysight N6732B 50 W basic DC power module provides programmable voltage and current, as well as measurement and protection features at a very economical price. Use this module to power your DUT or ATE system resources, such as fixture control.
This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance come standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 – 500 W.
Download BenchVue Basic app for free to control your instruments.
Output RatingsVoltage: 8 V
Current: 6.25 A
Power: 50 WProgramming Accuracy (at 23°C ±5°)
Voltage: 0.1% + 19 mV
Current: 0.15% + 20 mARipple and Noise (20 Hz to 20 MHz)
Voltage rms: 2 mV
Voltage peak-to-peak: 12 mV
Current rms: 4 mASKU: n/a -
Precision DC Power Module
AGILENT-HP/Keysight N6733B
The Keysight N6733B 50 W basic DC power module provides programmable voltage and current, as well as measurement and protection features at a very economical price. Use this module to power the DUT or ATE system resources, such as fixture control.
This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance come standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 – 300 W.
Output ratingsVoltage: 20 V
Current: 2.5 A
Power: 50 WProgramming accuracy (at 23°C ±5°C)
Voltage: 0.1% + 20 mV
Current: 0.15% + 20 mARipple and noise (20 Hz to 20 MHz)
Voltage rms: 3 mV
Voltage peak-to-peak: 14 mV
Current rms: 2 mASKU: n/a -
Audio Analyzer
AGILENT-Hp/Keysight U8903A
DC to 100kHz frequency range
Generator, analyzer, graph and sweep modes
High-quality signals and arbitrary waveforms
S-N ratio, SINAD, IMD, DFD, THD+N ratio, THD+N level, crosstalk and more
GPIB, LAN and USB interfacesWhether listening to mono, stereo or surround, the human ear knows what sounds good. Measuring how good, however, can be a challenge. The Keysight (Agilent/HP) U8903A audio analyzer helps you measure and quantify audio performance in applications such as wireless audio, analog components and ICs, and consumer audio.
Across the audio spectrum and beyond, this scalable, single-unit solution provides versatile measurement functions, diverse test signals and powerful analysis capabilities. Whatever your application, the U8903A can help you make an audible difference in device performance.
SKU: n/a -
Amplifier
AMPLIFIER RESEARCH 25W1000M7
Broadband Power Amplifier 100MHz – 1GHz, 25W
The Amplifier Research 25W1000M7 is a broadband, solid-state amplifier rated from 100 to 1000 MHz, CW linear power is 20 watts minimum.
It features instantaneous bandwidth, flat response, and immunity from even the worst case mismatch including shorted or open cables without damage or system shutdown.
Frequency range: 100 MHz to 1 GHz
Power output: 25 W
SKU: n/a -
Trasmitter/Receiver
Anritsu ME522A
The Anritsu ME522A PCM Measuring Instrument/ Error Rate Measuring Set consits of receiver and transmitter unit. It covers the 1 to 700 MHz frequency range, up to 1,4 GHz using a plugin. – Built-in synthesizer – Abundant measuring patterns – Flexible input/output interface. Level, waveform, and impedance can be set according to the system – Powerful error measuring functions – HP-IB control – Receiver The receiver comes with MH677A demultiplexer. Operating frequency reaches from 700 MHz to 1,4 GHz (input) and 350 to 700 MHz (output). – Built-in recorder. – Transmitter The transmitter comes with U/B converter MH5104A which provides a 564,992 ± 6 MHz operating frequency.
1 to 700 MHz.SKU: 3
-
AGILENT-Hp/Keysight E1439C
The Keysight 1439C/D is ideal for applications in RF signal acquisition, analysis and high resolution ATE. It has a baseband input and a 70 MHz IF input, both with 36 MHz bandwidth. The single-channel 95 MSa/s digitizer combines exceptional spurious-free dynamic range with alias-protected signal conditioning, center-frequency tunable digital filters, and a large signal capture memory, all in a single-wide C-size VXI module. The E1439D also incorporates a 200 MB/sec FPDP (Front Panel Data Port) capable of carrying full bandwidth data out of the module for analysis or storage.
36 MHz input bandwidth centered at 70 MHz
-90 dBfs spurious-free dynamic range
Anti-alias filter and signal conditioning
18MB RAM FIFO memory (expandable to 1.2 GB)
VXIbus outputs
VXI local bus (E1439D only)
Multi-channel compatible
VXI plug&play compatible
Single-slot, C-size module
Datasheet -
Diff Solder-in Probe Head
AGILENT-HP/Keysight E2677A
DIFF SOLDER-IN PROBE HEAD
Bandwidth:12 GHz specified
12.5 GHz typicalConnectivity:
Low loading, different input capacitance < = 270 fF Reliable, semi-permanent connection 4” lead length for reaching into tight spaces such as DIMM socket E2677A InfiniiMax differential solder-in probe head and accessories includes 20 full bandwidth and 10 medium bandwidth damping resistors. Features: 12 GHz specified bandwidth, 12.5 GHz typical bandwidth Low loading, different input capaicitance < = 270 fF Reliable semi-permanent connection 4” lead length for reaching into tight spaces such as a DIMM socket Variable span of leads from 0.2 – 3.3 mm (8 to 130 mils)
-
Probe
AGILENT-HP/Keysight E2679A
SINGLE – ENDED SOLDER PROBE HEAD
Original packaging:
Qty. 8 01131-81506 Mini Axial Resistor 0ohm
Qty. 2 01131-94308 150Ohm Resistor Template
Qty. 24 01131-81504 Mini Axial Resisotr 0ohm
Qty. 2 01131-94311 91Ohm Resistor Template
Qty 16 01131-81510 Mini Axial Resistor 91ohmBandwidth:
≤6 GHz input
Connectivity:
Low loading, different input capacitance < = 270 fF Reliable, semi-permanent connection 4” lead length for reaching into tight spaces such as DIMM socket InfiniiMax single-ended solder-in probe head and accessories. Includes 16 full bandwidth and 8 medium bandwidth damping resistors and 24 zero ohm ground resistors.
-
Power Supply
AGILENT-Hp/Keysight E3631A
Output Ratings
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 AProgramming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mARipple and Noise (20 Hz to 20 MHz)
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Readback Accuracy at 25°C ±5°C Voltage: 0.05% + 10 mV, 0.05% + 10 mV, 0.1% + 5 mV Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA Keysight basic DC power supplies offer essential features for a tight budget. The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package. Datasheet
-
Power Supply
AGILENT-Hp/Keysight E3646A
The Agilent E3646A 60-watt dual-output programmable power supply features built-in GPIB and RS-232 connectivity and SCPI language compatibility making it easy to create flexible power programs. For general-purpose use, this programmable power supply offers the performance of a system power supply at a surprisingly affordable price.
E364X: Basic System Power
The Agilent E3640A – E3649A power supplies fill the gap between manual bench power supplies and high performance system supplies, offering unmatched performance and functionality at a great price. They’re designed for moderate-speed test where automation is important and throughput is not critical. These single- and dual-output, dual range power supplies are ideal for contract manufacturers and OEMs who need to perform basic electronic functional tests on a variety of products quickly and economically.All models support GPIB and RS-232 for quick connectivity. SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. Less than 90 ms output settling time keeps throughput high without the need for a down programmer. Up to five store/recall states help minimize programming time while accelerating test. Remote sensing capability ensures output stability with longer leads.
Great Performance, Outstanding Price
With 30 to 100W of output power, the Agilent E364xA-series of programmable dc power supplies provides great performance at a great price. All ten models deliver clean power, dependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They’re designed to meet the needs of R&D design verification, production testing, QA verifications and other demanding applications with Agilent Technologies’ quality and reliability.Steady Output
With 0.01 percent load and line regulation, Agilent E364xA power supplies keep output steady when power line and load changes occur. They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Agilent E364xA power supplies specify less than 90 msec of voltage settling time at any output load condition.Remote Interface
Agilent E364xA power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232. Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well.Broad Support
VXIplug&play software drivers are available for Agilent VEE and National Instruments LabView™ and LabWindows™, simplifying integration of the E364xA into your test system. The drivers are supported under Microsoft® Windows 98 ® and NT. ®Front Panel Operation
An easy-to-use rotary knob and self-guiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of 10 mV/1 mA from the front panel. Up to five complete powers supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously.
Datasheet -
Power Supply
AGILENT-Hp/Keysight N5748A
Output Ratings
Voltage: 80 V
Current: 9.5 A
Power: 760 WThe single output, 760W N5748A, provides universal AC input, GPIB, LAN, USB, LXI compliance, and analog/resistance control of output voltage and current. It delivers reliable performance and enhanced capabilities in a compact 1U package.
-
Precision DC Power Module
AGILENT-HP/Keysight N6732B
The Keysight N6732B 50 W basic DC power module provides programmable voltage and current, as well as measurement and protection features at a very economical price. Use this module to power your DUT or ATE system resources, such as fixture control.
This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance come standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 – 500 W.
Download BenchVue Basic app for free to control your instruments.
Output RatingsVoltage: 8 V
Current: 6.25 A
Power: 50 WProgramming Accuracy (at 23°C ±5°)
Voltage: 0.1% + 19 mV
Current: 0.15% + 20 mARipple and Noise (20 Hz to 20 MHz)
Voltage rms: 2 mV
Voltage peak-to-peak: 12 mV
Current rms: 4 mA -
Precision DC Power Module
AGILENT-HP/Keysight N6733B
The Keysight N6733B 50 W basic DC power module provides programmable voltage and current, as well as measurement and protection features at a very economical price. Use this module to power the DUT or ATE system resources, such as fixture control.
This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance come standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 – 300 W.
Output ratingsVoltage: 20 V
Current: 2.5 A
Power: 50 WProgramming accuracy (at 23°C ±5°C)
Voltage: 0.1% + 20 mV
Current: 0.15% + 20 mARipple and noise (20 Hz to 20 MHz)
Voltage rms: 3 mV
Voltage peak-to-peak: 14 mV
Current rms: 2 mA -
Audio Analyzer
AGILENT-Hp/Keysight U8903A
DC to 100kHz frequency range
Generator, analyzer, graph and sweep modes
High-quality signals and arbitrary waveforms
S-N ratio, SINAD, IMD, DFD, THD+N ratio, THD+N level, crosstalk and more
GPIB, LAN and USB interfacesWhether listening to mono, stereo or surround, the human ear knows what sounds good. Measuring how good, however, can be a challenge. The Keysight (Agilent/HP) U8903A audio analyzer helps you measure and quantify audio performance in applications such as wireless audio, analog components and ICs, and consumer audio.
Across the audio spectrum and beyond, this scalable, single-unit solution provides versatile measurement functions, diverse test signals and powerful analysis capabilities. Whatever your application, the U8903A can help you make an audible difference in device performance.
-
Amplifier
AMPLIFIER RESEARCH 25W1000M7
Broadband Power Amplifier 100MHz – 1GHz, 25W
The Amplifier Research 25W1000M7 is a broadband, solid-state amplifier rated from 100 to 1000 MHz, CW linear power is 20 watts minimum.
It features instantaneous bandwidth, flat response, and immunity from even the worst case mismatch including shorted or open cables without damage or system shutdown.
Frequency range: 100 MHz to 1 GHz
Power output: 25 W
-
Trasmitter/Receiver
Anritsu ME522A
The Anritsu ME522A PCM Measuring Instrument/ Error Rate Measuring Set consits of receiver and transmitter unit. It covers the 1 to 700 MHz frequency range, up to 1,4 GHz using a plugin. – Built-in synthesizer – Abundant measuring patterns – Flexible input/output interface. Level, waveform, and impedance can be set according to the system – Powerful error measuring functions – HP-IB control – Receiver The receiver comes with MH677A demultiplexer. Operating frequency reaches from 700 MHz to 1,4 GHz (input) and 350 to 700 MHz (output). – Built-in recorder. – Transmitter The transmitter comes with U/B converter MH5104A which provides a 564,992 ± 6 MHz operating frequency.
1 to 700 MHz.
-
AGILENT-Hp/Keysight E1439C
The Keysight 1439C/D is ideal for applications in RF signal acquisition, analysis and high resolution ATE. It has a baseband input and a 70 MHz IF input, both with 36 MHz bandwidth. The single-channel 95 MSa/s digitizer combines exceptional spurious-free dynamic range with alias-protected signal conditioning, center-frequency tunable digital filters, and a large signal capture memory, all in a single-wide C-size VXI module. The E1439D also incorporates a 200 MB/sec FPDP (Front Panel Data Port) capable of carrying full bandwidth data out of the module for analysis or storage.
36 MHz input bandwidth centered at 70 MHz
-90 dBfs spurious-free dynamic range
Anti-alias filter and signal conditioning
18MB RAM FIFO memory (expandable to 1.2 GB)
VXIbus outputs
VXI local bus (E1439D only)
Multi-channel compatible
VXI plug&play compatible
Single-slot, C-size module
Datasheet -
Diff Solder-in Probe Head
AGILENT-HP/Keysight E2677A
DIFF SOLDER-IN PROBE HEAD
Bandwidth:12 GHz specified
12.5 GHz typicalConnectivity:
Low loading, different input capacitance < = 270 fF Reliable, semi-permanent connection 4” lead length for reaching into tight spaces such as DIMM socket E2677A InfiniiMax differential solder-in probe head and accessories includes 20 full bandwidth and 10 medium bandwidth damping resistors. Features: 12 GHz specified bandwidth, 12.5 GHz typical bandwidth Low loading, different input capaicitance < = 270 fF Reliable semi-permanent connection 4” lead length for reaching into tight spaces such as a DIMM socket Variable span of leads from 0.2 – 3.3 mm (8 to 130 mils)
-
Probe
AGILENT-HP/Keysight E2679A
SINGLE – ENDED SOLDER PROBE HEAD
Original packaging:
Qty. 8 01131-81506 Mini Axial Resistor 0ohm
Qty. 2 01131-94308 150Ohm Resistor Template
Qty. 24 01131-81504 Mini Axial Resisotr 0ohm
Qty. 2 01131-94311 91Ohm Resistor Template
Qty 16 01131-81510 Mini Axial Resistor 91ohmBandwidth:
≤6 GHz input
Connectivity:
Low loading, different input capacitance < = 270 fF Reliable, semi-permanent connection 4” lead length for reaching into tight spaces such as DIMM socket InfiniiMax single-ended solder-in probe head and accessories. Includes 16 full bandwidth and 8 medium bandwidth damping resistors and 24 zero ohm ground resistors.
-
Power Supply
AGILENT-Hp/Keysight E3631A
Output Ratings
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 AProgramming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mARipple and Noise (20 Hz to 20 MHz)
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Readback Accuracy at 25°C ±5°C Voltage: 0.05% + 10 mV, 0.05% + 10 mV, 0.1% + 5 mV Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA Keysight basic DC power supplies offer essential features for a tight budget. The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package. Datasheet
-
Power Supply
AGILENT-Hp/Keysight E3646A
The Agilent E3646A 60-watt dual-output programmable power supply features built-in GPIB and RS-232 connectivity and SCPI language compatibility making it easy to create flexible power programs. For general-purpose use, this programmable power supply offers the performance of a system power supply at a surprisingly affordable price.
E364X: Basic System Power
The Agilent E3640A – E3649A power supplies fill the gap between manual bench power supplies and high performance system supplies, offering unmatched performance and functionality at a great price. They’re designed for moderate-speed test where automation is important and throughput is not critical. These single- and dual-output, dual range power supplies are ideal for contract manufacturers and OEMs who need to perform basic electronic functional tests on a variety of products quickly and economically.All models support GPIB and RS-232 for quick connectivity. SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. Less than 90 ms output settling time keeps throughput high without the need for a down programmer. Up to five store/recall states help minimize programming time while accelerating test. Remote sensing capability ensures output stability with longer leads.
Great Performance, Outstanding Price
With 30 to 100W of output power, the Agilent E364xA-series of programmable dc power supplies provides great performance at a great price. All ten models deliver clean power, dependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They’re designed to meet the needs of R&D design verification, production testing, QA verifications and other demanding applications with Agilent Technologies’ quality and reliability.Steady Output
With 0.01 percent load and line regulation, Agilent E364xA power supplies keep output steady when power line and load changes occur. They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Agilent E364xA power supplies specify less than 90 msec of voltage settling time at any output load condition.Remote Interface
Agilent E364xA power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232. Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well.Broad Support
VXIplug&play software drivers are available for Agilent VEE and National Instruments LabView™ and LabWindows™, simplifying integration of the E364xA into your test system. The drivers are supported under Microsoft® Windows 98 ® and NT. ®Front Panel Operation
An easy-to-use rotary knob and self-guiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of 10 mV/1 mA from the front panel. Up to five complete powers supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously.
Datasheet -
Power Supply
AGILENT-Hp/Keysight N5748A
Output Ratings
Voltage: 80 V
Current: 9.5 A
Power: 760 WThe single output, 760W N5748A, provides universal AC input, GPIB, LAN, USB, LXI compliance, and analog/resistance control of output voltage and current. It delivers reliable performance and enhanced capabilities in a compact 1U package.
-
Precision DC Power Module
AGILENT-HP/Keysight N6732B
The Keysight N6732B 50 W basic DC power module provides programmable voltage and current, as well as measurement and protection features at a very economical price. Use this module to power your DUT or ATE system resources, such as fixture control.
This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance come standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 – 500 W.
Download BenchVue Basic app for free to control your instruments.
Output RatingsVoltage: 8 V
Current: 6.25 A
Power: 50 WProgramming Accuracy (at 23°C ±5°)
Voltage: 0.1% + 19 mV
Current: 0.15% + 20 mARipple and Noise (20 Hz to 20 MHz)
Voltage rms: 2 mV
Voltage peak-to-peak: 12 mV
Current rms: 4 mA -
Precision DC Power Module
AGILENT-HP/Keysight N6733B
The Keysight N6733B 50 W basic DC power module provides programmable voltage and current, as well as measurement and protection features at a very economical price. Use this module to power the DUT or ATE system resources, such as fixture control.
This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance come standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 – 300 W.
Output ratingsVoltage: 20 V
Current: 2.5 A
Power: 50 WProgramming accuracy (at 23°C ±5°C)
Voltage: 0.1% + 20 mV
Current: 0.15% + 20 mARipple and noise (20 Hz to 20 MHz)
Voltage rms: 3 mV
Voltage peak-to-peak: 14 mV
Current rms: 2 mA -
Audio Analyzer
AGILENT-Hp/Keysight U8903A
DC to 100kHz frequency range
Generator, analyzer, graph and sweep modes
High-quality signals and arbitrary waveforms
S-N ratio, SINAD, IMD, DFD, THD+N ratio, THD+N level, crosstalk and more
GPIB, LAN and USB interfacesWhether listening to mono, stereo or surround, the human ear knows what sounds good. Measuring how good, however, can be a challenge. The Keysight (Agilent/HP) U8903A audio analyzer helps you measure and quantify audio performance in applications such as wireless audio, analog components and ICs, and consumer audio.
Across the audio spectrum and beyond, this scalable, single-unit solution provides versatile measurement functions, diverse test signals and powerful analysis capabilities. Whatever your application, the U8903A can help you make an audible difference in device performance.
-
Amplifier
AMPLIFIER RESEARCH 25W1000M7
Broadband Power Amplifier 100MHz – 1GHz, 25W
The Amplifier Research 25W1000M7 is a broadband, solid-state amplifier rated from 100 to 1000 MHz, CW linear power is 20 watts minimum.
It features instantaneous bandwidth, flat response, and immunity from even the worst case mismatch including shorted or open cables without damage or system shutdown.
Frequency range: 100 MHz to 1 GHz
Power output: 25 W
-
Trasmitter/Receiver
Anritsu ME522A
The Anritsu ME522A PCM Measuring Instrument/ Error Rate Measuring Set consits of receiver and transmitter unit. It covers the 1 to 700 MHz frequency range, up to 1,4 GHz using a plugin. – Built-in synthesizer – Abundant measuring patterns – Flexible input/output interface. Level, waveform, and impedance can be set according to the system – Powerful error measuring functions – HP-IB control – Receiver The receiver comes with MH677A demultiplexer. Operating frequency reaches from 700 MHz to 1,4 GHz (input) and 350 to 700 MHz (output). – Built-in recorder. – Transmitter The transmitter comes with U/B converter MH5104A which provides a 564,992 ± 6 MHz operating frequency.
1 to 700 MHz.