ItalianoAudio Analyzer
Showing all 3 results
-
Audio Analyzer
AGILENT-Hp/Keysight U8903A
DC to 100kHz frequency range
Generator, analyzer, graph and sweep modes
High-quality signals and arbitrary waveforms
S-N ratio, SINAD, IMD, DFD, THD+N ratio, THD+N level, crosstalk and more
GPIB, LAN and USB interfacesWhether listening to mono, stereo or surround, the human ear knows what sounds good. Measuring how good, however, can be a challenge. The Keysight (Agilent/HP) U8903A audio analyzer helps you measure and quantify audio performance in applications such as wireless audio, analog components and ICs, and consumer audio.
Across the audio spectrum and beyond, this scalable, single-unit solution provides versatile measurement functions, diverse test signals and powerful analysis capabilities. Whatever your application, the U8903A can help you make an audible difference in device performance.
SKU: n/a -
Audio Analyzer
HP-Agilent/Keysight 8903B
Measures distortion, SINAD, signal-to-noise
Measures true-rms ac volts, dc volts, frequency
Low-distortion programmable source
rms, average, and quasi-peak detectionThe Keysight Technologies 8903B audio analyzer provides unparalleled versatility and performance for audio measurements from 20 Hz to 100 kHz. The 8903B combines the functionality of a low-distortion audio source, high-performance distotion analyzer, frequency counter, ac voltmeter, dc voltmeter, and SINAD meter into one compact package. With microprocessor control of source and analyzer, the 8903B can perform stimulus-response measurements (such as signal-to-noise ratio and swept distortion) automatically with no additional equipment. For ease of use, most measurements on the 8903B are made with only one or two keystrokes. The 8903B automatically tunes and autoranges for maximum accuracy and resolution. For quick identification of input signals, the analyzer counts and displays the input frequency in all ac measurement modes.
Measures distortion, SINAD, signal-to-noise
Measures true-rms ac volts, dc volts, frequency
Low-distortion programmable source
rms, average, and quasi-peak detectionSKU: n/a -
Audio Analyzer
ROHDE & SCHWARZ UP350
AUDIO ANALYZER 10Hz TO 80KHz 1147.2507.03
The Rohde & Schwarz UP350 is a high-performance professional audio analyzer designed for laboratory, R&D, production testing, quality control, and service applications involving both analog and digital audio equipment.
The instrument combines a dual-channel audio generator and analyzer in a single unit, providing accurate and comprehensive audio measurements for professional testing environments.
Key Features:
Frequency range: 10 Hz to 80 kHz
Dual-channel signal generation and measurement
THD and THD+N (SINAD) measurements
RMS, Peak, and Quasi-Peak level measurements
Frequency and phase measurements
High-resolution FFT spectrum analysis (<3 Hz resolution) Harmonic and intermodulation distortion analysis Signal-to-noise ratio and noise measurements Analog audio inputs and outputs Digital audio interfaces (AES/EBU, S/PDIF, consumer and professional formats) Sampling rates from 32 kHz up to 192 kHz Input level up to 33 V Input noise below 2 µV (A-weighted) USB interface for remote control and data transfer Built-in Test Signals: Sine wave generator Frequency and level sweeps Two-tone test signals Multitone generator (up to 17 simultaneous sine waves) Burst sine signals Noise generation for audio testing applications Typical Applications: Audio amplifier testing DAC and ADC characterization Professional and Hi-Fi audio equipment testing Production and quality assurance environments Research & Development laboratories Service and calibration facilities Rohde & Schwarz instruments are renowned worldwide for their precision, reliability, and long-term performance. Condition: Used. Sold as shown in the pictures. Any accessories included are only those visible in the listing photos. Please contact us for additional information or high-resolution pictures. DatasheetSKU: n/a
-
Audio Analyzer
AGILENT-Hp/Keysight U8903A
DC to 100kHz frequency range
Generator, analyzer, graph and sweep modes
High-quality signals and arbitrary waveforms
S-N ratio, SINAD, IMD, DFD, THD+N ratio, THD+N level, crosstalk and more
GPIB, LAN and USB interfacesWhether listening to mono, stereo or surround, the human ear knows what sounds good. Measuring how good, however, can be a challenge. The Keysight (Agilent/HP) U8903A audio analyzer helps you measure and quantify audio performance in applications such as wireless audio, analog components and ICs, and consumer audio.
Across the audio spectrum and beyond, this scalable, single-unit solution provides versatile measurement functions, diverse test signals and powerful analysis capabilities. Whatever your application, the U8903A can help you make an audible difference in device performance.
-
Audio Analyzer
HP-Agilent/Keysight 8903B
Measures distortion, SINAD, signal-to-noise
Measures true-rms ac volts, dc volts, frequency
Low-distortion programmable source
rms, average, and quasi-peak detectionThe Keysight Technologies 8903B audio analyzer provides unparalleled versatility and performance for audio measurements from 20 Hz to 100 kHz. The 8903B combines the functionality of a low-distortion audio source, high-performance distotion analyzer, frequency counter, ac voltmeter, dc voltmeter, and SINAD meter into one compact package. With microprocessor control of source and analyzer, the 8903B can perform stimulus-response measurements (such as signal-to-noise ratio and swept distortion) automatically with no additional equipment. For ease of use, most measurements on the 8903B are made with only one or two keystrokes. The 8903B automatically tunes and autoranges for maximum accuracy and resolution. For quick identification of input signals, the analyzer counts and displays the input frequency in all ac measurement modes.
Measures distortion, SINAD, signal-to-noise
Measures true-rms ac volts, dc volts, frequency
Low-distortion programmable source
rms, average, and quasi-peak detection -
Audio Analyzer
ROHDE & SCHWARZ UP350
AUDIO ANALYZER 10Hz TO 80KHz 1147.2507.03
The Rohde & Schwarz UP350 is a high-performance professional audio analyzer designed for laboratory, R&D, production testing, quality control, and service applications involving both analog and digital audio equipment.
The instrument combines a dual-channel audio generator and analyzer in a single unit, providing accurate and comprehensive audio measurements for professional testing environments.
Key Features:
Frequency range: 10 Hz to 80 kHz
Dual-channel signal generation and measurement
THD and THD+N (SINAD) measurements
RMS, Peak, and Quasi-Peak level measurements
Frequency and phase measurements
High-resolution FFT spectrum analysis (<3 Hz resolution) Harmonic and intermodulation distortion analysis Signal-to-noise ratio and noise measurements Analog audio inputs and outputs Digital audio interfaces (AES/EBU, S/PDIF, consumer and professional formats) Sampling rates from 32 kHz up to 192 kHz Input level up to 33 V Input noise below 2 µV (A-weighted) USB interface for remote control and data transfer Built-in Test Signals: Sine wave generator Frequency and level sweeps Two-tone test signals Multitone generator (up to 17 simultaneous sine waves) Burst sine signals Noise generation for audio testing applications Typical Applications: Audio amplifier testing DAC and ADC characterization Professional and Hi-Fi audio equipment testing Production and quality assurance environments Research & Development laboratories Service and calibration facilities Rohde & Schwarz instruments are renowned worldwide for their precision, reliability, and long-term performance. Condition: Used. Sold as shown in the pictures. Any accessories included are only those visible in the listing photos. Please contact us for additional information or high-resolution pictures. Datasheet
-
Audio Analyzer
AGILENT-Hp/Keysight U8903A
DC to 100kHz frequency range
Generator, analyzer, graph and sweep modes
High-quality signals and arbitrary waveforms
S-N ratio, SINAD, IMD, DFD, THD+N ratio, THD+N level, crosstalk and more
GPIB, LAN and USB interfacesWhether listening to mono, stereo or surround, the human ear knows what sounds good. Measuring how good, however, can be a challenge. The Keysight (Agilent/HP) U8903A audio analyzer helps you measure and quantify audio performance in applications such as wireless audio, analog components and ICs, and consumer audio.
Across the audio spectrum and beyond, this scalable, single-unit solution provides versatile measurement functions, diverse test signals and powerful analysis capabilities. Whatever your application, the U8903A can help you make an audible difference in device performance.
-
Audio Analyzer
HP-Agilent/Keysight 8903B
Measures distortion, SINAD, signal-to-noise
Measures true-rms ac volts, dc volts, frequency
Low-distortion programmable source
rms, average, and quasi-peak detectionThe Keysight Technologies 8903B audio analyzer provides unparalleled versatility and performance for audio measurements from 20 Hz to 100 kHz. The 8903B combines the functionality of a low-distortion audio source, high-performance distotion analyzer, frequency counter, ac voltmeter, dc voltmeter, and SINAD meter into one compact package. With microprocessor control of source and analyzer, the 8903B can perform stimulus-response measurements (such as signal-to-noise ratio and swept distortion) automatically with no additional equipment. For ease of use, most measurements on the 8903B are made with only one or two keystrokes. The 8903B automatically tunes and autoranges for maximum accuracy and resolution. For quick identification of input signals, the analyzer counts and displays the input frequency in all ac measurement modes.
Measures distortion, SINAD, signal-to-noise
Measures true-rms ac volts, dc volts, frequency
Low-distortion programmable source
rms, average, and quasi-peak detection -
Audio Analyzer
ROHDE & SCHWARZ UP350
AUDIO ANALYZER 10Hz TO 80KHz 1147.2507.03
The Rohde & Schwarz UP350 is a high-performance professional audio analyzer designed for laboratory, R&D, production testing, quality control, and service applications involving both analog and digital audio equipment.
The instrument combines a dual-channel audio generator and analyzer in a single unit, providing accurate and comprehensive audio measurements for professional testing environments.
Key Features:
Frequency range: 10 Hz to 80 kHz
Dual-channel signal generation and measurement
THD and THD+N (SINAD) measurements
RMS, Peak, and Quasi-Peak level measurements
Frequency and phase measurements
High-resolution FFT spectrum analysis (<3 Hz resolution) Harmonic and intermodulation distortion analysis Signal-to-noise ratio and noise measurements Analog audio inputs and outputs Digital audio interfaces (AES/EBU, S/PDIF, consumer and professional formats) Sampling rates from 32 kHz up to 192 kHz Input level up to 33 V Input noise below 2 µV (A-weighted) USB interface for remote control and data transfer Built-in Test Signals: Sine wave generator Frequency and level sweeps Two-tone test signals Multitone generator (up to 17 simultaneous sine waves) Burst sine signals Noise generation for audio testing applications Typical Applications: Audio amplifier testing DAC and ADC characterization Professional and Hi-Fi audio equipment testing Production and quality assurance environments Research & Development laboratories Service and calibration facilities Rohde & Schwarz instruments are renowned worldwide for their precision, reliability, and long-term performance. Condition: Used. Sold as shown in the pictures. Any accessories included are only those visible in the listing photos. Please contact us for additional information or high-resolution pictures. Datasheet