Shop
Showing 61–90 of 1293 results
-
ADAPTOR
SUHNER 33_N-SMA-50-1/113 UE 22542421 RF/Coaxial Adaptor, Straight Adapter
The 33_N-SMA-50-1/113_UE is a RF/coaxial Straight Adapter with N-type plug to SMA jack connection. The N-type plug has PFA/PTFE insulator, gold-plated copper beryllium alloy body and a centre contact. The SMA jack has PFA/PTFE insulator, gold-plated copper beryllium alloy body and a centre contact.
* 50 Ω Impedance
* -65 to 165°C Operating temperature range
* frequency max. 18 GHz
* VSWR DC – 12.4 GHz ≤ 1.05 + 0.015 f (GHz)
SKU: n/a -
Current Probe Amplifiter
TEKTRONIX TCPA300
Current Probe Amplifier.
The TCPA300 from Tektronix is a current probe amplifier. This amplifier when used with TCP312A, TCP305A and TCP303 probes, provides a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30A, 50A and 150A DC continuous and for even higher current levels. Higher frequency performance is available with TCP312A providing greater than or equal to 100MHz bandwidth and maximum current of 30A DC. The TCPA300 is approved by UL3111-1 first edition, CAN/CSA C22.2 number 1010.1-92, EN61010-1:2001, EC Council Directive 89/336/EEC, FCC Part 15, Subpart B class A and AS/NZS 2064.1/2 standards.DC to 100MHz maximum bandwidth
Automatic control and onscreen scaling and units
AC/DC input coupling
Low insertion impedance reduces device under test loading
Split core construction allows easy circuit connection
Status indicators provide visual operating status and notification of potential error conditions
Low DC drift and noise allows improved low level current measurements
DatasheetSKU: n/a -
Oscilloscope 2 channels
TEKTRONIX TDS1012B OSCILLOSCOPE 100 MHz, 2 CHANNEL
TDS1000B (mono) and TDS2000B (color) combine performance with ease-of-use at an affordable price. Devices range from 40MHz to 200 MHz bandwidth and up to 2GS/s maximum sample rate. Available in two or four channels, the TDS1000B and TDS2000B feature a USB port to remove data, to connect to a PC with included OpenChoice® and NI SignalExpress® PC software, and access to compatible printers. FFT and 11 automatic measurements are standard, as well as multiple language user interface and help features. Applications for Tektronix´s Digital Storage Oscilloscopes are design, debug, education, training, manufacturing test and QA, service, and repair.
Key performance specifications
– 40 MHz, 60 MHz, and 100 MHz bandwidths
– Sample rates up to 1 GS/s real time
– 2 channels
– Monochrome LCD display
– Advanced triggers including pulse width trigger and line-selectable video trigger
– FFT standard on all models
– 12 automatic measurements
– Multiple-language user interface and context-sensitive helpConnectivity
– Removable data storage using the front-panel USB port
– Seamless PC connectivity through the USB device port, with OpenChoice® and NI SignalExpress® PC software
– Direct print to all PictBridge®-compatible printers through the USB device portAffordable digital precision
With up to 100 MHz bandwidth and 1 GS/s maximum sample rate, no other digital storage oscilloscope offers as much bandwidth and sample rate for the price. The TDS1000B Series oscilloscopes provide accurate real-time acquisition up to their full bandwidth, the same record length at all time base settings, advanced triggers to isolate signals of interest, and 12 standard automatic measurements on all models. Their Fast Fourier Transform (FFT) and waveform add, subtract, and multiply math functions allow you to analyze, characterize, and troubleshoot circuits.Quick and easy waveform capture
The simple user interface with classic analog-style controls makes these instruments easy to use, reducing learning time and increasing efficiency. Innovative features such as the Autoset Menu, Probe Check Wizard, and Context-sensitive Help Menu optimize instrument setup and operation.Flexible data transfer
With USB host and device ports which enable removable data storage, seamless PC connectivity, and direct printing, no other digital storage oscilloscope offers as much flexibility and ease of data transfer for the price.
DatasheetSKU: n/a -
TESEQ SCHAFFNER NSG 430
Electrostatic Discharge Simulator
Rise Time: 5ns ±30% at 2kV
Discharge voltage: 2 – 16.5kV
Polarity: positive / negative – non switchable
Discharge capacitor Co: 150pF ± 10%
Discharge resistor Ro: 150 ohms ± 5%
Mode of operation: single/continuous (20 Hz)
For testing per IEC 801-2 / 1984
DatasheetSKU: n/a -
Module
AGILENT 34903A – 20 Channel Actuator/GP Switch Module for 34970A/34972A
The Agilent 34903A is a general-purpose switch module for the 34970A/34972A Data Acquisition/Switch Unit. It has 20 independent single-pole, double-throw (SPDT) relays and is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. Its 300 V, 1 A contacts can handle up to 50 W, enough for many power line switching applications.
* 20 Channel Actuator/GP Switch
* SPDT (Form C) latching relays
* 300 V, 1 A actuation and controlSKU: 1142 -
Module
AGILENT 34907A Multifunction Module for 34970A/34972A
The HP 34907A module for the 34970A/34972A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs – all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors.
It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.
Key Features & Specifications:
– 16 bits of digital input and output
– 100 kHz totalizer input
– Two +/-12V analog outputsSKU: 1145 -
Date Acquisition/Switch Unit
AGILENT 34970A DATA ACQUISITION SWITCH UNIT
The Agilent 34970A data acquisition / data logger switch consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
* 3-slot mainframe with built-in GPIB and RS232 interfaces
* 6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
* 8 switch and control plug-in modules to choose from
* Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
* 50k readings of non-volatile memory holds data when power is removed
* Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
* A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequencesSKU: 1118 -
Power Supply
AGILENT 6645A
This series of 200 W linear-regulated DC power supplies is designed to maximize the throughput of DUTs through the manufacturing test process with fast up and down pro- gramming time.
Valuable assemblies can be destroyed by a minor component failure that can allow a surge of voltage or current to flow to the DUT. Fast protection features, including fast crowbar, mode crossover protection, and the ability to connect the protection circuitry of multiple power supplies can increase production yield.
Programming of the DC output and the protection features can be done either from the front panel or using industry standard SCPI commands, via the GPIB. Using the serial link, up to 16 power supplies can be connected through one GPIB address. Test system integration can be further simplified be using the VXIplug&play drivers. The output voltage and current can also be controlled with analog signals. This is helpful for certain types of noisy environ- ments, and also immediate reactions to process changes.DC floating voltage: Output terminals can be floated up to ± 240 VDC from chassis ground.
Remote sensing: Up to half the rated output voltage can be dropped in each load lead. The drop in the load leads subtracts from the volt- age available for the load.
Command processing time: Average time required for the output voltage to begin to change following receipt of digital data is 20 ms for the power supplies connected directly to the GPIB.
Output programming response time: The rise and fall time (10/90% and 90/10%) of the output voltage is less than 15 ms. The output voltage change settles within 1 LSB (0.025% x rated voltage) of final value in less than 60 ms.
Down programming: An active down programmer sinks approxi- mately 20% of the rated output current.Output Ratings
Output voltage: 0 to 120 V
Output current (40° C): 0 to 1.5 A
Maximum current (50° C/55° C): 1.4 A/1.3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 51 mV
Current 0.15% + 1.7 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 700 µV
Voltage peak-to-peak: 7 mV
Current rms: 1 mA
DatasheetSKU: n/a -
Power Sensor
AGILENT 8487A
HP AGILENT KEYSIGHT 8487A POWER SENSOR 50 MHz to 50 GHz
The 8487A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM series, EPM-P series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters. The 8487A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 50 MHz to 50 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -30 dBm to +20 dBm)
• 50 ohm impedance
• 2.4 mm(m) connector
Scheda TecnicaSKU: n/a
-
ADAPTOR
SUHNER 33_N-SMA-50-1/113 UE 22542421 RF/Coaxial Adaptor, Straight Adapter
The 33_N-SMA-50-1/113_UE is a RF/coaxial Straight Adapter with N-type plug to SMA jack connection. The N-type plug has PFA/PTFE insulator, gold-plated copper beryllium alloy body and a centre contact. The SMA jack has PFA/PTFE insulator, gold-plated copper beryllium alloy body and a centre contact.
* 50 Ω Impedance
* -65 to 165°C Operating temperature range
* frequency max. 18 GHz
* VSWR DC – 12.4 GHz ≤ 1.05 + 0.015 f (GHz)
-
-
Current Probe Amplifiter
TEKTRONIX TCPA300
Current Probe Amplifier.
The TCPA300 from Tektronix is a current probe amplifier. This amplifier when used with TCP312A, TCP305A and TCP303 probes, provides a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30A, 50A and 150A DC continuous and for even higher current levels. Higher frequency performance is available with TCP312A providing greater than or equal to 100MHz bandwidth and maximum current of 30A DC. The TCPA300 is approved by UL3111-1 first edition, CAN/CSA C22.2 number 1010.1-92, EN61010-1:2001, EC Council Directive 89/336/EEC, FCC Part 15, Subpart B class A and AS/NZS 2064.1/2 standards.DC to 100MHz maximum bandwidth
Automatic control and onscreen scaling and units
AC/DC input coupling
Low insertion impedance reduces device under test loading
Split core construction allows easy circuit connection
Status indicators provide visual operating status and notification of potential error conditions
Low DC drift and noise allows improved low level current measurements
Datasheet -
Oscilloscope 2 channels
TEKTRONIX TDS1012B OSCILLOSCOPE 100 MHz, 2 CHANNEL
TDS1000B (mono) and TDS2000B (color) combine performance with ease-of-use at an affordable price. Devices range from 40MHz to 200 MHz bandwidth and up to 2GS/s maximum sample rate. Available in two or four channels, the TDS1000B and TDS2000B feature a USB port to remove data, to connect to a PC with included OpenChoice® and NI SignalExpress® PC software, and access to compatible printers. FFT and 11 automatic measurements are standard, as well as multiple language user interface and help features. Applications for Tektronix´s Digital Storage Oscilloscopes are design, debug, education, training, manufacturing test and QA, service, and repair.
Key performance specifications
– 40 MHz, 60 MHz, and 100 MHz bandwidths
– Sample rates up to 1 GS/s real time
– 2 channels
– Monochrome LCD display
– Advanced triggers including pulse width trigger and line-selectable video trigger
– FFT standard on all models
– 12 automatic measurements
– Multiple-language user interface and context-sensitive helpConnectivity
– Removable data storage using the front-panel USB port
– Seamless PC connectivity through the USB device port, with OpenChoice® and NI SignalExpress® PC software
– Direct print to all PictBridge®-compatible printers through the USB device portAffordable digital precision
With up to 100 MHz bandwidth and 1 GS/s maximum sample rate, no other digital storage oscilloscope offers as much bandwidth and sample rate for the price. The TDS1000B Series oscilloscopes provide accurate real-time acquisition up to their full bandwidth, the same record length at all time base settings, advanced triggers to isolate signals of interest, and 12 standard automatic measurements on all models. Their Fast Fourier Transform (FFT) and waveform add, subtract, and multiply math functions allow you to analyze, characterize, and troubleshoot circuits.Quick and easy waveform capture
The simple user interface with classic analog-style controls makes these instruments easy to use, reducing learning time and increasing efficiency. Innovative features such as the Autoset Menu, Probe Check Wizard, and Context-sensitive Help Menu optimize instrument setup and operation.Flexible data transfer
With USB host and device ports which enable removable data storage, seamless PC connectivity, and direct printing, no other digital storage oscilloscope offers as much flexibility and ease of data transfer for the price.
Datasheet -
TESEQ SCHAFFNER NSG 430
Electrostatic Discharge Simulator
Rise Time: 5ns ±30% at 2kV
Discharge voltage: 2 – 16.5kV
Polarity: positive / negative – non switchable
Discharge capacitor Co: 150pF ± 10%
Discharge resistor Ro: 150 ohms ± 5%
Mode of operation: single/continuous (20 Hz)
For testing per IEC 801-2 / 1984
Datasheet -
Module
AGILENT 34903A – 20 Channel Actuator/GP Switch Module for 34970A/34972A
The Agilent 34903A is a general-purpose switch module for the 34970A/34972A Data Acquisition/Switch Unit. It has 20 independent single-pole, double-throw (SPDT) relays and is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. Its 300 V, 1 A contacts can handle up to 50 W, enough for many power line switching applications.
* 20 Channel Actuator/GP Switch
* SPDT (Form C) latching relays
* 300 V, 1 A actuation and control -
Module
AGILENT 34907A Multifunction Module for 34970A/34972A
The HP 34907A module for the 34970A/34972A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs – all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors.
It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.
Key Features & Specifications:
– 16 bits of digital input and output
– 100 kHz totalizer input
– Two +/-12V analog outputs -
Date Acquisition/Switch Unit
AGILENT 34970A DATA ACQUISITION SWITCH UNIT
The Agilent 34970A data acquisition / data logger switch consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
* 3-slot mainframe with built-in GPIB and RS232 interfaces
* 6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
* 8 switch and control plug-in modules to choose from
* Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
* 50k readings of non-volatile memory holds data when power is removed
* Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
* A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences -
Power Supply
AGILENT 6645A
This series of 200 W linear-regulated DC power supplies is designed to maximize the throughput of DUTs through the manufacturing test process with fast up and down pro- gramming time.
Valuable assemblies can be destroyed by a minor component failure that can allow a surge of voltage or current to flow to the DUT. Fast protection features, including fast crowbar, mode crossover protection, and the ability to connect the protection circuitry of multiple power supplies can increase production yield.
Programming of the DC output and the protection features can be done either from the front panel or using industry standard SCPI commands, via the GPIB. Using the serial link, up to 16 power supplies can be connected through one GPIB address. Test system integration can be further simplified be using the VXIplug&play drivers. The output voltage and current can also be controlled with analog signals. This is helpful for certain types of noisy environ- ments, and also immediate reactions to process changes.DC floating voltage: Output terminals can be floated up to ± 240 VDC from chassis ground.
Remote sensing: Up to half the rated output voltage can be dropped in each load lead. The drop in the load leads subtracts from the volt- age available for the load.
Command processing time: Average time required for the output voltage to begin to change following receipt of digital data is 20 ms for the power supplies connected directly to the GPIB.
Output programming response time: The rise and fall time (10/90% and 90/10%) of the output voltage is less than 15 ms. The output voltage change settles within 1 LSB (0.025% x rated voltage) of final value in less than 60 ms.
Down programming: An active down programmer sinks approxi- mately 20% of the rated output current.Output Ratings
Output voltage: 0 to 120 V
Output current (40° C): 0 to 1.5 A
Maximum current (50° C/55° C): 1.4 A/1.3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 51 mV
Current 0.15% + 1.7 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 700 µV
Voltage peak-to-peak: 7 mV
Current rms: 1 mA
Datasheet -
Power Sensor
AGILENT 8487A
HP AGILENT KEYSIGHT 8487A POWER SENSOR 50 MHz to 50 GHz
The 8487A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM series, EPM-P series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters. The 8487A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 50 MHz to 50 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -30 dBm to +20 dBm)
• 50 ohm impedance
• 2.4 mm(m) connector
Scheda Tecnica
-
ADAPTOR
SUHNER 33_N-SMA-50-1/113 UE 22542421 RF/Coaxial Adaptor, Straight Adapter
The 33_N-SMA-50-1/113_UE is a RF/coaxial Straight Adapter with N-type plug to SMA jack connection. The N-type plug has PFA/PTFE insulator, gold-plated copper beryllium alloy body and a centre contact. The SMA jack has PFA/PTFE insulator, gold-plated copper beryllium alloy body and a centre contact.
* 50 Ω Impedance
* -65 to 165°C Operating temperature range
* frequency max. 18 GHz
* VSWR DC – 12.4 GHz ≤ 1.05 + 0.015 f (GHz)
-
-
Current Probe Amplifiter
TEKTRONIX TCPA300
Current Probe Amplifier.
The TCPA300 from Tektronix is a current probe amplifier. This amplifier when used with TCP312A, TCP305A and TCP303 probes, provides a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30A, 50A and 150A DC continuous and for even higher current levels. Higher frequency performance is available with TCP312A providing greater than or equal to 100MHz bandwidth and maximum current of 30A DC. The TCPA300 is approved by UL3111-1 first edition, CAN/CSA C22.2 number 1010.1-92, EN61010-1:2001, EC Council Directive 89/336/EEC, FCC Part 15, Subpart B class A and AS/NZS 2064.1/2 standards.DC to 100MHz maximum bandwidth
Automatic control and onscreen scaling and units
AC/DC input coupling
Low insertion impedance reduces device under test loading
Split core construction allows easy circuit connection
Status indicators provide visual operating status and notification of potential error conditions
Low DC drift and noise allows improved low level current measurements
Datasheet -
Oscilloscope 2 channels
TEKTRONIX TDS1012B OSCILLOSCOPE 100 MHz, 2 CHANNEL
TDS1000B (mono) and TDS2000B (color) combine performance with ease-of-use at an affordable price. Devices range from 40MHz to 200 MHz bandwidth and up to 2GS/s maximum sample rate. Available in two or four channels, the TDS1000B and TDS2000B feature a USB port to remove data, to connect to a PC with included OpenChoice® and NI SignalExpress® PC software, and access to compatible printers. FFT and 11 automatic measurements are standard, as well as multiple language user interface and help features. Applications for Tektronix´s Digital Storage Oscilloscopes are design, debug, education, training, manufacturing test and QA, service, and repair.
Key performance specifications
– 40 MHz, 60 MHz, and 100 MHz bandwidths
– Sample rates up to 1 GS/s real time
– 2 channels
– Monochrome LCD display
– Advanced triggers including pulse width trigger and line-selectable video trigger
– FFT standard on all models
– 12 automatic measurements
– Multiple-language user interface and context-sensitive helpConnectivity
– Removable data storage using the front-panel USB port
– Seamless PC connectivity through the USB device port, with OpenChoice® and NI SignalExpress® PC software
– Direct print to all PictBridge®-compatible printers through the USB device portAffordable digital precision
With up to 100 MHz bandwidth and 1 GS/s maximum sample rate, no other digital storage oscilloscope offers as much bandwidth and sample rate for the price. The TDS1000B Series oscilloscopes provide accurate real-time acquisition up to their full bandwidth, the same record length at all time base settings, advanced triggers to isolate signals of interest, and 12 standard automatic measurements on all models. Their Fast Fourier Transform (FFT) and waveform add, subtract, and multiply math functions allow you to analyze, characterize, and troubleshoot circuits.Quick and easy waveform capture
The simple user interface with classic analog-style controls makes these instruments easy to use, reducing learning time and increasing efficiency. Innovative features such as the Autoset Menu, Probe Check Wizard, and Context-sensitive Help Menu optimize instrument setup and operation.Flexible data transfer
With USB host and device ports which enable removable data storage, seamless PC connectivity, and direct printing, no other digital storage oscilloscope offers as much flexibility and ease of data transfer for the price.
Datasheet -
TESEQ SCHAFFNER NSG 430
Electrostatic Discharge Simulator
Rise Time: 5ns ±30% at 2kV
Discharge voltage: 2 – 16.5kV
Polarity: positive / negative – non switchable
Discharge capacitor Co: 150pF ± 10%
Discharge resistor Ro: 150 ohms ± 5%
Mode of operation: single/continuous (20 Hz)
For testing per IEC 801-2 / 1984
Datasheet -
Module
AGILENT 34903A – 20 Channel Actuator/GP Switch Module for 34970A/34972A
The Agilent 34903A is a general-purpose switch module for the 34970A/34972A Data Acquisition/Switch Unit. It has 20 independent single-pole, double-throw (SPDT) relays and is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. Its 300 V, 1 A contacts can handle up to 50 W, enough for many power line switching applications.
* 20 Channel Actuator/GP Switch
* SPDT (Form C) latching relays
* 300 V, 1 A actuation and control -
Module
AGILENT 34907A Multifunction Module for 34970A/34972A
The HP 34907A module for the 34970A/34972A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs – all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors.
It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.
Key Features & Specifications:
– 16 bits of digital input and output
– 100 kHz totalizer input
– Two +/-12V analog outputs -
Date Acquisition/Switch Unit
AGILENT 34970A DATA ACQUISITION SWITCH UNIT
The Agilent 34970A data acquisition / data logger switch consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
* 3-slot mainframe with built-in GPIB and RS232 interfaces
* 6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
* 8 switch and control plug-in modules to choose from
* Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
* 50k readings of non-volatile memory holds data when power is removed
* Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
* A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences -
Power Supply
AGILENT 6645A
This series of 200 W linear-regulated DC power supplies is designed to maximize the throughput of DUTs through the manufacturing test process with fast up and down pro- gramming time.
Valuable assemblies can be destroyed by a minor component failure that can allow a surge of voltage or current to flow to the DUT. Fast protection features, including fast crowbar, mode crossover protection, and the ability to connect the protection circuitry of multiple power supplies can increase production yield.
Programming of the DC output and the protection features can be done either from the front panel or using industry standard SCPI commands, via the GPIB. Using the serial link, up to 16 power supplies can be connected through one GPIB address. Test system integration can be further simplified be using the VXIplug&play drivers. The output voltage and current can also be controlled with analog signals. This is helpful for certain types of noisy environ- ments, and also immediate reactions to process changes.DC floating voltage: Output terminals can be floated up to ± 240 VDC from chassis ground.
Remote sensing: Up to half the rated output voltage can be dropped in each load lead. The drop in the load leads subtracts from the volt- age available for the load.
Command processing time: Average time required for the output voltage to begin to change following receipt of digital data is 20 ms for the power supplies connected directly to the GPIB.
Output programming response time: The rise and fall time (10/90% and 90/10%) of the output voltage is less than 15 ms. The output voltage change settles within 1 LSB (0.025% x rated voltage) of final value in less than 60 ms.
Down programming: An active down programmer sinks approxi- mately 20% of the rated output current.Output Ratings
Output voltage: 0 to 120 V
Output current (40° C): 0 to 1.5 A
Maximum current (50° C/55° C): 1.4 A/1.3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 51 mV
Current 0.15% + 1.7 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 700 µV
Voltage peak-to-peak: 7 mV
Current rms: 1 mA
Datasheet -
Power Sensor
AGILENT 8487A
HP AGILENT KEYSIGHT 8487A POWER SENSOR 50 MHz to 50 GHz
The 8487A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM series, EPM-P series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters. The 8487A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 50 MHz to 50 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -30 dBm to +20 dBm)
• 50 ohm impedance
• 2.4 mm(m) connector
Scheda Tecnica