ItalianoShop
Showing 61–90 of 1497 results
-
Power Supply
HP-Agilent/Keysight 6625A
Keysight high performance DC power supplies offer spec and accuracy for test optimization. The precision multiple output, 25W – 50W GPIB 6625A, 6626A, 6628A, and 6629A provide fast, low-noise outputs- dual-range, precision low current measurement- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. * Low-range volts, amps 25W: 0 to 7 V, 0 to 15 mA. * Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA. * High range volts, amps 25W: 0 to 50 V, 0 to 500 mA. * High range volts, amps 50W: 0 to 50 V, 0 to 1 A or, 0 to 16 V, 0 to 2 A. * Voltage 25W: 0.016% + 1.5 mV (low), 10 mV (high). * Voltage 50W: 0.016% + 53 mV (low), 10 mV (high). * Current 25W: 0.04% + 15 µA (low), 100 µA (high). * Current 50W: 0.04% + 185 µA (low), 500 µA (high). * Voltage rms: 500 µV. * Peak-to-peak: 3 mV. * Current rms: 0.1 mA.
25W or 50W, 2 outputsSKU: 1160 -
RF Vector Network Analyzer
R&S ZVB4 Vector Network Analyzer 4 ports, 4 GHz
R&S ZVB4 is Vector Network Analyzer 4 ports, eith frequency range: 300 kHz to 4 GHz
* Medium-class network analyzer featuring outstanding performance
* Overrange up to 150 kHz (unspecified and without calibration ex factory)
* Capable of balanced measurements (mixed-mode S-parameters)
* option ZVAB-B4: Oven Quartz (OCXO) > The R&S ZVA/ZVB/ZVT can optionally be equipped with a 10 MHz oven-controlled crystal oscillator (OCXO) to enhance the frequency accuracy of the internal generators.
* TOSM Calibration Kit ZV-Z21SKU: n/a -
Power Sensor
HP-Agilent/Keysight R8486A
HP AGILENT KEYSIGHT R8486A Thermocouple Waveguide Power Sensor 26.5 GHz to 40 GHz
The R8486A power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A, 435A/B, 436A, 437A, 438A series power meters. The R8486A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• 50 MHz calibration port
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 26.5 GHz to 40 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -10 dBm to +20 dBm)
• UG-599/U waveguide flange
DatasheetSKU: n/a -
Function Generator
HP-Agilent/Keysight 8116A
The fully programmable HP 8116A features pulse as well as function generator capabilities in one small unit. A broad 1 mHz-50 MHz band for all waveforms and a wide choice of operating and modulating modes assure high flexibility. These factors, plus good repeatability, make the HP 8116A a sound, long-term investment.
HP's custom IC's have made it feasible to put the many HP 8116A capabilities into such a small volume. Handling is simplified by a unique, microprocessor-controlled, operating concept which ensures a clear overview of the compact front panel at all times. When the mode and waveform have been selected, illuminated labels show which parameters must be set.
Level or amplitude programming. The HP 8116A's output can be programmed in terms of high and low levels or in terms of amplitude and offset. Consequently a direct, automatic, conversion is always feasible so that the HP 8116A can be programmed in the same terms as the device is specified.
Safe limit. Devices can be protected by the limit feature. This prevents the output from exceeding a given magnitude.
DatasheetSKU: n/a -
Spectrum Analyzer
HP-Agilent/Keysight 8590B
Features:
9 kHz to 1.8 GHz Frequency Range
Keyboard Entry of Parameters
Amplitude Range: -115 to +30 dBm
50 or 75 Ω Input
Need-Specific Test CapabilitiesThe HP 8590B Spectrum Analyzer offers basic RF and microwave measurement performance at a low cost. The 8590B has a frequency range of 9 kHz to 1.8GHz, a 50- or optional 75- ohm input, and a weight of only 30 pounds. Amplitude range is a wide -115 to +30 dBm. If AC power is not available, the 8590B can be operated using the HP 85901A portable AC power source.
The measurement capabilities of the 8590B can be adjusted to fit specific measurement needs. An optional memory card reader enables the loading of specific measurement personalities for cable television, electromagnetic compatibility, or digital radio applications.
SKU: 472
-
Power Supply
HP-Agilent/Keysight 6625A
Keysight high performance DC power supplies offer spec and accuracy for test optimization. The precision multiple output, 25W – 50W GPIB 6625A, 6626A, 6628A, and 6629A provide fast, low-noise outputs- dual-range, precision low current measurement- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. * Low-range volts, amps 25W: 0 to 7 V, 0 to 15 mA. * Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA. * High range volts, amps 25W: 0 to 50 V, 0 to 500 mA. * High range volts, amps 50W: 0 to 50 V, 0 to 1 A or, 0 to 16 V, 0 to 2 A. * Voltage 25W: 0.016% + 1.5 mV (low), 10 mV (high). * Voltage 50W: 0.016% + 53 mV (low), 10 mV (high). * Current 25W: 0.04% + 15 µA (low), 100 µA (high). * Current 50W: 0.04% + 185 µA (low), 500 µA (high). * Voltage rms: 500 µV. * Peak-to-peak: 3 mV. * Current rms: 0.1 mA.
25W or 50W, 2 outputs -
RF Vector Network Analyzer
R&S ZVB4 Vector Network Analyzer 4 ports, 4 GHz
R&S ZVB4 is Vector Network Analyzer 4 ports, eith frequency range: 300 kHz to 4 GHz
* Medium-class network analyzer featuring outstanding performance
* Overrange up to 150 kHz (unspecified and without calibration ex factory)
* Capable of balanced measurements (mixed-mode S-parameters)
* option ZVAB-B4: Oven Quartz (OCXO) > The R&S ZVA/ZVB/ZVT can optionally be equipped with a 10 MHz oven-controlled crystal oscillator (OCXO) to enhance the frequency accuracy of the internal generators.
* TOSM Calibration Kit ZV-Z21 -
Power Sensor
HP-Agilent/Keysight R8486A
HP AGILENT KEYSIGHT R8486A Thermocouple Waveguide Power Sensor 26.5 GHz to 40 GHz
The R8486A power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A, 435A/B, 436A, 437A, 438A series power meters. The R8486A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• 50 MHz calibration port
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 26.5 GHz to 40 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -10 dBm to +20 dBm)
• UG-599/U waveguide flange
Datasheet -
Function Generator
HP-Agilent/Keysight 8116A
The fully programmable HP 8116A features pulse as well as function generator capabilities in one small unit. A broad 1 mHz-50 MHz band for all waveforms and a wide choice of operating and modulating modes assure high flexibility. These factors, plus good repeatability, make the HP 8116A a sound, long-term investment.
HP's custom IC's have made it feasible to put the many HP 8116A capabilities into such a small volume. Handling is simplified by a unique, microprocessor-controlled, operating concept which ensures a clear overview of the compact front panel at all times. When the mode and waveform have been selected, illuminated labels show which parameters must be set.
Level or amplitude programming. The HP 8116A's output can be programmed in terms of high and low levels or in terms of amplitude and offset. Consequently a direct, automatic, conversion is always feasible so that the HP 8116A can be programmed in the same terms as the device is specified.
Safe limit. Devices can be protected by the limit feature. This prevents the output from exceeding a given magnitude.
Datasheet -
Spectrum Analyzer
HP-Agilent/Keysight 8590B
Features:
9 kHz to 1.8 GHz Frequency Range
Keyboard Entry of Parameters
Amplitude Range: -115 to +30 dBm
50 or 75 Ω Input
Need-Specific Test CapabilitiesThe HP 8590B Spectrum Analyzer offers basic RF and microwave measurement performance at a low cost. The 8590B has a frequency range of 9 kHz to 1.8GHz, a 50- or optional 75- ohm input, and a weight of only 30 pounds. Amplitude range is a wide -115 to +30 dBm. If AC power is not available, the 8590B can be operated using the HP 85901A portable AC power source.
The measurement capabilities of the 8590B can be adjusted to fit specific measurement needs. An optional memory card reader enables the loading of specific measurement personalities for cable television, electromagnetic compatibility, or digital radio applications.
-
Power Supply
HP-Agilent/Keysight 6625A
Keysight high performance DC power supplies offer spec and accuracy for test optimization. The precision multiple output, 25W – 50W GPIB 6625A, 6626A, 6628A, and 6629A provide fast, low-noise outputs- dual-range, precision low current measurement- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. * Low-range volts, amps 25W: 0 to 7 V, 0 to 15 mA. * Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA. * High range volts, amps 25W: 0 to 50 V, 0 to 500 mA. * High range volts, amps 50W: 0 to 50 V, 0 to 1 A or, 0 to 16 V, 0 to 2 A. * Voltage 25W: 0.016% + 1.5 mV (low), 10 mV (high). * Voltage 50W: 0.016% + 53 mV (low), 10 mV (high). * Current 25W: 0.04% + 15 µA (low), 100 µA (high). * Current 50W: 0.04% + 185 µA (low), 500 µA (high). * Voltage rms: 500 µV. * Peak-to-peak: 3 mV. * Current rms: 0.1 mA.
25W or 50W, 2 outputs -
RF Vector Network Analyzer
R&S ZVB4 Vector Network Analyzer 4 ports, 4 GHz
R&S ZVB4 is Vector Network Analyzer 4 ports, eith frequency range: 300 kHz to 4 GHz
* Medium-class network analyzer featuring outstanding performance
* Overrange up to 150 kHz (unspecified and without calibration ex factory)
* Capable of balanced measurements (mixed-mode S-parameters)
* option ZVAB-B4: Oven Quartz (OCXO) > The R&S ZVA/ZVB/ZVT can optionally be equipped with a 10 MHz oven-controlled crystal oscillator (OCXO) to enhance the frequency accuracy of the internal generators.
* TOSM Calibration Kit ZV-Z21 -
Power Sensor
HP-Agilent/Keysight R8486A
HP AGILENT KEYSIGHT R8486A Thermocouple Waveguide Power Sensor 26.5 GHz to 40 GHz
The R8486A power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A, 435A/B, 436A, 437A, 438A series power meters. The R8486A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• 50 MHz calibration port
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 26.5 GHz to 40 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -10 dBm to +20 dBm)
• UG-599/U waveguide flange
Datasheet -
Function Generator
HP-Agilent/Keysight 8116A
The fully programmable HP 8116A features pulse as well as function generator capabilities in one small unit. A broad 1 mHz-50 MHz band for all waveforms and a wide choice of operating and modulating modes assure high flexibility. These factors, plus good repeatability, make the HP 8116A a sound, long-term investment.
HP's custom IC's have made it feasible to put the many HP 8116A capabilities into such a small volume. Handling is simplified by a unique, microprocessor-controlled, operating concept which ensures a clear overview of the compact front panel at all times. When the mode and waveform have been selected, illuminated labels show which parameters must be set.
Level or amplitude programming. The HP 8116A's output can be programmed in terms of high and low levels or in terms of amplitude and offset. Consequently a direct, automatic, conversion is always feasible so that the HP 8116A can be programmed in the same terms as the device is specified.
Safe limit. Devices can be protected by the limit feature. This prevents the output from exceeding a given magnitude.
Datasheet -
Spectrum Analyzer
HP-Agilent/Keysight 8590B
Features:
9 kHz to 1.8 GHz Frequency Range
Keyboard Entry of Parameters
Amplitude Range: -115 to +30 dBm
50 or 75 Ω Input
Need-Specific Test CapabilitiesThe HP 8590B Spectrum Analyzer offers basic RF and microwave measurement performance at a low cost. The 8590B has a frequency range of 9 kHz to 1.8GHz, a 50- or optional 75- ohm input, and a weight of only 30 pounds. Amplitude range is a wide -115 to +30 dBm. If AC power is not available, the 8590B can be operated using the HP 85901A portable AC power source.
The measurement capabilities of the 8590B can be adjusted to fit specific measurement needs. An optional memory card reader enables the loading of specific measurement personalities for cable television, electromagnetic compatibility, or digital radio applications.