ItalianoShop
Showing 31–60 of 1497 results
-
compact real-time spectrum analyzer/receiver
HAROGIC SAN-400
40 GHz Compact Real-Time Spectrum Analyzer/Receiver
Main features:
9 kHz~40 GHz real-time spectrum analyzer/receiver;
Superheterodyne digital receiver architecture, 14 segments pre-selected filter;
Typical image suppression and IF rejection>75 dBc;
100 MHz analysis bandwidth with adjustable sampling rate, 400 GHz/sec spectrum sweep speed;
FPGA based digital signal processing;
40 GHz DANL=-141 dBm/Hz, Phase Noise=-86 dBc/Hz@10 kHz;
Weight 185 grams (core module), size 125 × 60 × 17 mm, power consumption 10-14 W;
Highly compatible API interfaces and SAStudio4 GUI;
Compatible with ARM and x86 processors, Linux and Windows operating systems;
Built-in OCXO (option), temperature drift≤0.15 ppm;
USB3.0/2.0 Type C supported.Compact Real-Time Spectrum Analyzer/Receiver
SAN-400 is a receiver/spectrum analyzer module based on superheterodyne digital IF architecture, equipped with USB3.0 interface and high-speed FPGA digital signal processing, providing good performance in a compact size. It is optimized for applications such as receivers, spectrum monitoring, and RF testing. It offers multiple outputs, including spectrum, digital IQ stream, power detection waveform (zero sweep bandwidth), and real-time spectrum. The volume, weight, and power consumption are highly optimized for field and embedded applications. It provides a highly compatible API interfaces, which can quickly realize efficient secondary development. User code is compatible with other HAROGIC devices such as SAE-90, SAE-200 and NXE-200, allowing users to select hardware flexibly according to their application needs.
SAN-400 provides a particularly flexible solution for receivers, spectrum monitoring and convenient RF testing. The device is with a weight of only 185 g, which is smaller than the size of a mobile phone, realizing the complete functionality of superheterodyne receiver and spectrum analyzer system in a compact size. The module has a highly integrated superheterodyne receiver RF front-end built-in with performance, as well as a back-end digital processing system based on FPGA to accelerate relevant digital signal processing. FPGA-based digital signal processing effectively reduces the performance requirements of the device on the back-end processor. Even on low-power x86 or ARM processor platforms with limited performance, SAN-400 device can still be deployed to achieve good measurement results. SAN-400 works properly on both Linux and Windows operating systems.
SKU: n/a -
Spectrum Analyzer
HP-Agilent/Keysight 8565E
The Keysight (Agilent/HP) 8565E 30 Hz – 50 GHz millimeter spectrum analyzer offers the measurement capability and performance previously found in larger, more expensive benchtop analyzers. You can measure signals from 30 Hz to 50 GHz (preselected above 2.75 GHz) with a single coaxial connection.
The 8565E combines outstanding phase noise, sensitivity, 1 Hz resolution bandwidths, synthesized tuning and wide dynamic range in a MIL-rugged package built to withstand harsh environmental conditions. It offers a complete solution for adjacent-channel power (ACP) testing of burst carrier signals using digital modulation, and the ability to measure occupied bandwidth percentage.
Keysight (Agilent/HP) 8565E Specifications:Continuous 30 Hz to 50 GHz sweep
Fast digital resolution bandwidths of 1, 3, 10, 30 and 100 Hz
Adjacent channel power, channel power, carrier power, occupied bandwidth percentage and time-gated measurements standard
Precision timebase and 1 Hz counter resolution
MIL-T-28800 rugged
Measurement personalities for digital radio and phase noise measurements
DatasheetSKU: 134 -
Oscilloscope 4 channles
Rigol DS4054
500 MHz, 4ch, 4GS/s
The DS4000 series digital oscilloscope is a versatile, high performance oscilloscope that incorporates many of today’s most advanced technologies and processes. Featuring bandwidths between 100MHz and 500MHz, sample rates up to 4GSa/s and up to 4 analog channels, the DS4000 is ideal for a wide variety of markets including communications, defense, aerospace, industrial electronics, R&D and educational fields. – 500 MHz bandwidth – 4 GSa/s sample rate – 4 Analog channels available – 140 million memory points, standard – 110,000 Waveforms per second – Original Ultravision technology – Hardware allows for real-time, continuous waveform recording and waveform analysis.SKU: 212
-
compact real-time spectrum analyzer/receiver
HAROGIC SAN-400
40 GHz Compact Real-Time Spectrum Analyzer/Receiver
Main features:
9 kHz~40 GHz real-time spectrum analyzer/receiver;
Superheterodyne digital receiver architecture, 14 segments pre-selected filter;
Typical image suppression and IF rejection>75 dBc;
100 MHz analysis bandwidth with adjustable sampling rate, 400 GHz/sec spectrum sweep speed;
FPGA based digital signal processing;
40 GHz DANL=-141 dBm/Hz, Phase Noise=-86 dBc/Hz@10 kHz;
Weight 185 grams (core module), size 125 × 60 × 17 mm, power consumption 10-14 W;
Highly compatible API interfaces and SAStudio4 GUI;
Compatible with ARM and x86 processors, Linux and Windows operating systems;
Built-in OCXO (option), temperature drift≤0.15 ppm;
USB3.0/2.0 Type C supported.Compact Real-Time Spectrum Analyzer/Receiver
SAN-400 is a receiver/spectrum analyzer module based on superheterodyne digital IF architecture, equipped with USB3.0 interface and high-speed FPGA digital signal processing, providing good performance in a compact size. It is optimized for applications such as receivers, spectrum monitoring, and RF testing. It offers multiple outputs, including spectrum, digital IQ stream, power detection waveform (zero sweep bandwidth), and real-time spectrum. The volume, weight, and power consumption are highly optimized for field and embedded applications. It provides a highly compatible API interfaces, which can quickly realize efficient secondary development. User code is compatible with other HAROGIC devices such as SAE-90, SAE-200 and NXE-200, allowing users to select hardware flexibly according to their application needs.
SAN-400 provides a particularly flexible solution for receivers, spectrum monitoring and convenient RF testing. The device is with a weight of only 185 g, which is smaller than the size of a mobile phone, realizing the complete functionality of superheterodyne receiver and spectrum analyzer system in a compact size. The module has a highly integrated superheterodyne receiver RF front-end built-in with performance, as well as a back-end digital processing system based on FPGA to accelerate relevant digital signal processing. FPGA-based digital signal processing effectively reduces the performance requirements of the device on the back-end processor. Even on low-power x86 or ARM processor platforms with limited performance, SAN-400 device can still be deployed to achieve good measurement results. SAN-400 works properly on both Linux and Windows operating systems.
-
Spectrum Analyzer
HP-Agilent/Keysight 8565E
The Keysight (Agilent/HP) 8565E 30 Hz – 50 GHz millimeter spectrum analyzer offers the measurement capability and performance previously found in larger, more expensive benchtop analyzers. You can measure signals from 30 Hz to 50 GHz (preselected above 2.75 GHz) with a single coaxial connection.
The 8565E combines outstanding phase noise, sensitivity, 1 Hz resolution bandwidths, synthesized tuning and wide dynamic range in a MIL-rugged package built to withstand harsh environmental conditions. It offers a complete solution for adjacent-channel power (ACP) testing of burst carrier signals using digital modulation, and the ability to measure occupied bandwidth percentage.
Keysight (Agilent/HP) 8565E Specifications:Continuous 30 Hz to 50 GHz sweep
Fast digital resolution bandwidths of 1, 3, 10, 30 and 100 Hz
Adjacent channel power, channel power, carrier power, occupied bandwidth percentage and time-gated measurements standard
Precision timebase and 1 Hz counter resolution
MIL-T-28800 rugged
Measurement personalities for digital radio and phase noise measurements
Datasheet -
Oscilloscope 4 channles
Rigol DS4054
500 MHz, 4ch, 4GS/s
The DS4000 series digital oscilloscope is a versatile, high performance oscilloscope that incorporates many of today’s most advanced technologies and processes. Featuring bandwidths between 100MHz and 500MHz, sample rates up to 4GSa/s and up to 4 analog channels, the DS4000 is ideal for a wide variety of markets including communications, defense, aerospace, industrial electronics, R&D and educational fields. – 500 MHz bandwidth – 4 GSa/s sample rate – 4 Analog channels available – 140 million memory points, standard – 110,000 Waveforms per second – Original Ultravision technology – Hardware allows for real-time, continuous waveform recording and waveform analysis.
-
compact real-time spectrum analyzer/receiver
HAROGIC SAN-400
40 GHz Compact Real-Time Spectrum Analyzer/Receiver
Main features:
9 kHz~40 GHz real-time spectrum analyzer/receiver;
Superheterodyne digital receiver architecture, 14 segments pre-selected filter;
Typical image suppression and IF rejection>75 dBc;
100 MHz analysis bandwidth with adjustable sampling rate, 400 GHz/sec spectrum sweep speed;
FPGA based digital signal processing;
40 GHz DANL=-141 dBm/Hz, Phase Noise=-86 dBc/Hz@10 kHz;
Weight 185 grams (core module), size 125 × 60 × 17 mm, power consumption 10-14 W;
Highly compatible API interfaces and SAStudio4 GUI;
Compatible with ARM and x86 processors, Linux and Windows operating systems;
Built-in OCXO (option), temperature drift≤0.15 ppm;
USB3.0/2.0 Type C supported.Compact Real-Time Spectrum Analyzer/Receiver
SAN-400 is a receiver/spectrum analyzer module based on superheterodyne digital IF architecture, equipped with USB3.0 interface and high-speed FPGA digital signal processing, providing good performance in a compact size. It is optimized for applications such as receivers, spectrum monitoring, and RF testing. It offers multiple outputs, including spectrum, digital IQ stream, power detection waveform (zero sweep bandwidth), and real-time spectrum. The volume, weight, and power consumption are highly optimized for field and embedded applications. It provides a highly compatible API interfaces, which can quickly realize efficient secondary development. User code is compatible with other HAROGIC devices such as SAE-90, SAE-200 and NXE-200, allowing users to select hardware flexibly according to their application needs.
SAN-400 provides a particularly flexible solution for receivers, spectrum monitoring and convenient RF testing. The device is with a weight of only 185 g, which is smaller than the size of a mobile phone, realizing the complete functionality of superheterodyne receiver and spectrum analyzer system in a compact size. The module has a highly integrated superheterodyne receiver RF front-end built-in with performance, as well as a back-end digital processing system based on FPGA to accelerate relevant digital signal processing. FPGA-based digital signal processing effectively reduces the performance requirements of the device on the back-end processor. Even on low-power x86 or ARM processor platforms with limited performance, SAN-400 device can still be deployed to achieve good measurement results. SAN-400 works properly on both Linux and Windows operating systems.
-
Spectrum Analyzer
HP-Agilent/Keysight 8565E
The Keysight (Agilent/HP) 8565E 30 Hz – 50 GHz millimeter spectrum analyzer offers the measurement capability and performance previously found in larger, more expensive benchtop analyzers. You can measure signals from 30 Hz to 50 GHz (preselected above 2.75 GHz) with a single coaxial connection.
The 8565E combines outstanding phase noise, sensitivity, 1 Hz resolution bandwidths, synthesized tuning and wide dynamic range in a MIL-rugged package built to withstand harsh environmental conditions. It offers a complete solution for adjacent-channel power (ACP) testing of burst carrier signals using digital modulation, and the ability to measure occupied bandwidth percentage.
Keysight (Agilent/HP) 8565E Specifications:Continuous 30 Hz to 50 GHz sweep
Fast digital resolution bandwidths of 1, 3, 10, 30 and 100 Hz
Adjacent channel power, channel power, carrier power, occupied bandwidth percentage and time-gated measurements standard
Precision timebase and 1 Hz counter resolution
MIL-T-28800 rugged
Measurement personalities for digital radio and phase noise measurements
Datasheet -
Oscilloscope 4 channles
Rigol DS4054
500 MHz, 4ch, 4GS/s
The DS4000 series digital oscilloscope is a versatile, high performance oscilloscope that incorporates many of today’s most advanced technologies and processes. Featuring bandwidths between 100MHz and 500MHz, sample rates up to 4GSa/s and up to 4 analog channels, the DS4000 is ideal for a wide variety of markets including communications, defense, aerospace, industrial electronics, R&D and educational fields. – 500 MHz bandwidth – 4 GSa/s sample rate – 4 Analog channels available – 140 million memory points, standard – 110,000 Waveforms per second – Original Ultravision technology – Hardware allows for real-time, continuous waveform recording and waveform analysis.