ItalianoShop
Showing 751–780 of 1386 results
-
Power Supply
HP-Agilent/Keysight E3620A
50W Dual Output Power Supply, Two 25V, 1A
Keysight basic DC power supplies offer essential features for a tight budget.
The multiple output, 35-50 W, E3620A and E3630A provide dual and triple outputs; small, compact size for bench use; low-noise and excellent regulation; and overload indicator to monitor output.
The Keysight 50W, dual output E3620A has two clean, reliable outputs for general purpose application; and is compact, affordable for versatile benchtop testing.Output ratings (Maximum current is derated 3.3% per °C from 40°C to 55°C)
> Output 1: 0 to 25 V, 0 to 1 A
> Output 2: 0 to 25 V, 0 to 1 A
> Power (max): 50 WRipple & noise from 20 Hz to 20 MHz
> Normal Mode Voltage rms: 350 µV
> Peak-to-Peak: 1.5 mVLoad & line regulation
> 0.01% + 2mVMeter resolution
> Voltage: 10 mV (0-20 V), 100 mV, (>20 V)
> Current: 1 mASKU: 1102 -
ELECTRICAL SAFETY ANALYZER
CHROMA 19032
I test di sicurezza elettrica sono un elemento importante nei test di qualità dei prodotti elettrici. Tutti i prodotti elettrici come adattatori, SMPS, cariche, elettrodomestici, prodotti informatici e prodotti video devono essere sottoposti a test di sicurezza elettrica.
La serie 19032 combina i test Hipot, Resistenza di isolamento (IR), Ground Bond (GB), Corrente di dispersione (LC) / LC LC / CC LC e Funzione dinamica. Il risparmio di spazio può arrivare fino al 50% dello spazio della linea di produzione, non acquistando più strumenti di test di sicurezza. Il 19032 è in grado di aumentare l’efficienza dei test di sicurezza elettrica durante la produzione e ridurre i costi di manodopera associati.
SKU: n/a -
Power Supply
METAF MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply
The MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply is a equipment with high stability, high reliability, low noise, its output voltage or current can be continuously adjusted, and its constant voltage and current can auto-conversion. This low cost and universal power supply can be used in many different areas, from test of R&D equipment to test of production lines.
Features:
– Output off function
– Triple independent DC outputs. Two adjustable and one fixed output
– Independent, series and parallel variety output
– Constant voltage and constant current
– Low ripple and noise
– Four LED displays with 3 digits, selectable for two sets output voltage and current display simultaneously
– 16 hours continuous output with full load
– Auto tracking outputIndependent output:
CH1: 0-30V/0-05A
CH2: 0-30V/0-05A
CH3: 5V/1ASerial output:
CH1+CH2: 0-60V/0-5AParallel output:
CH1+CH2: 0-30V/0-10ASpecification:
Line Regulation: CV 1X10^-4+3mV CC 2X10^-3+3mA CH3 5mV
Load Regulation: CV 1X10^-4+4mV CC 2X10^-3+3mA CH3 15mV
Ripple & Noise: CV 1mVrms CC 3mA rms CH3 2mV
Display Accuracy: ±(0.5%Rdg+2digits)
Input Voltage: 110~127VAC±10%, 220~240VAC±10%
Dimensions (L x W x D): 250x135x460mm
Weight: 8,2 kgSKU: n/a -
Module
HP-Agilent/Keysight N6731B
Keysight basic modules provide stable output, device protection, and accurate measurements. A single range allows programming voltages and currents from 0 V and 0 A to their maximum voltage and current rating. Use 2-wire local sense or 4-wire remote sense to improve regulation. All modules feature a quick disconnect connector.
Programmable output voltages: 0 to 150 V
Output power: 50 to 300 W
Voltage accuracy: 0.1% + 19 mV (5V output)
Ripple and noise 10 mV (5V output)
Up and down-programming with resistive load typically 20 msOvervoltage, overcurrent, and overtemperature protection
Basic modules are single wide allowing four per mainframe
Modules can operate at lower output power to stay within mainframe rating
Modules include a quick disconnect connector
DatasheetSKU: n/a -
Power Supply
AGILENT-Hp/Keysight E3631A
The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package.
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 A
Programming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms Readback Accuracy at 25°C ±5° 1200W, DC System Power Supplies,60V - 50A. DatasheetSKU: n/a -
Power Meter
HP-Agilent/Keysight N1914A
Frequency range of 9 kHz to 110 GHz (sensor dependent) Wide dynamic range of -70 to +44 dBm (sensor dependent) Speed improvement by 2X for E-Series sensors: up to 400 readings/sec Go beyond GPIB with LAN LXI-C and USB connectivity Code-compatible with E4418B, E4419B power meters Code-compatible with 436A, 437B and 438A power meters (option 200) Increased measurement channels: up to three channels with two additional U2000 Series power sensors connected using the optional USB hosts Automated frequency/power sweep measurements with the optional external trigger in/out feature
SKU: 205
-
Power Supply
HP-Agilent/Keysight E3620A
50W Dual Output Power Supply, Two 25V, 1A
Keysight basic DC power supplies offer essential features for a tight budget.
The multiple output, 35-50 W, E3620A and E3630A provide dual and triple outputs; small, compact size for bench use; low-noise and excellent regulation; and overload indicator to monitor output.
The Keysight 50W, dual output E3620A has two clean, reliable outputs for general purpose application; and is compact, affordable for versatile benchtop testing.Output ratings (Maximum current is derated 3.3% per °C from 40°C to 55°C)
> Output 1: 0 to 25 V, 0 to 1 A
> Output 2: 0 to 25 V, 0 to 1 A
> Power (max): 50 WRipple & noise from 20 Hz to 20 MHz
> Normal Mode Voltage rms: 350 µV
> Peak-to-Peak: 1.5 mVLoad & line regulation
> 0.01% + 2mVMeter resolution
> Voltage: 10 mV (0-20 V), 100 mV, (>20 V)
> Current: 1 mA -
ELECTRICAL SAFETY ANALYZER
CHROMA 19032
I test di sicurezza elettrica sono un elemento importante nei test di qualità dei prodotti elettrici. Tutti i prodotti elettrici come adattatori, SMPS, cariche, elettrodomestici, prodotti informatici e prodotti video devono essere sottoposti a test di sicurezza elettrica.
La serie 19032 combina i test Hipot, Resistenza di isolamento (IR), Ground Bond (GB), Corrente di dispersione (LC) / LC LC / CC LC e Funzione dinamica. Il risparmio di spazio può arrivare fino al 50% dello spazio della linea di produzione, non acquistando più strumenti di test di sicurezza. Il 19032 è in grado di aumentare l’efficienza dei test di sicurezza elettrica durante la produzione e ridurre i costi di manodopera associati.
-
Power Supply
METAF MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply
The MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply is a equipment with high stability, high reliability, low noise, its output voltage or current can be continuously adjusted, and its constant voltage and current can auto-conversion. This low cost and universal power supply can be used in many different areas, from test of R&D equipment to test of production lines.
Features:
– Output off function
– Triple independent DC outputs. Two adjustable and one fixed output
– Independent, series and parallel variety output
– Constant voltage and constant current
– Low ripple and noise
– Four LED displays with 3 digits, selectable for two sets output voltage and current display simultaneously
– 16 hours continuous output with full load
– Auto tracking outputIndependent output:
CH1: 0-30V/0-05A
CH2: 0-30V/0-05A
CH3: 5V/1ASerial output:
CH1+CH2: 0-60V/0-5AParallel output:
CH1+CH2: 0-30V/0-10ASpecification:
Line Regulation: CV 1X10^-4+3mV CC 2X10^-3+3mA CH3 5mV
Load Regulation: CV 1X10^-4+4mV CC 2X10^-3+3mA CH3 15mV
Ripple & Noise: CV 1mVrms CC 3mA rms CH3 2mV
Display Accuracy: ±(0.5%Rdg+2digits)
Input Voltage: 110~127VAC±10%, 220~240VAC±10%
Dimensions (L x W x D): 250x135x460mm
Weight: 8,2 kg -
Module
HP-Agilent/Keysight N6731B
Keysight basic modules provide stable output, device protection, and accurate measurements. A single range allows programming voltages and currents from 0 V and 0 A to their maximum voltage and current rating. Use 2-wire local sense or 4-wire remote sense to improve regulation. All modules feature a quick disconnect connector.
Programmable output voltages: 0 to 150 V
Output power: 50 to 300 W
Voltage accuracy: 0.1% + 19 mV (5V output)
Ripple and noise 10 mV (5V output)
Up and down-programming with resistive load typically 20 msOvervoltage, overcurrent, and overtemperature protection
Basic modules are single wide allowing four per mainframe
Modules can operate at lower output power to stay within mainframe rating
Modules include a quick disconnect connector
Datasheet -
-
Power Supply
AGILENT-Hp/Keysight E3631A
The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package.
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 A
Programming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms Readback Accuracy at 25°C ±5° 1200W, DC System Power Supplies,60V - 50A. Datasheet -
Power Meter
HP-Agilent/Keysight N1914A
Frequency range of 9 kHz to 110 GHz (sensor dependent) Wide dynamic range of -70 to +44 dBm (sensor dependent) Speed improvement by 2X for E-Series sensors: up to 400 readings/sec Go beyond GPIB with LAN LXI-C and USB connectivity Code-compatible with E4418B, E4419B power meters Code-compatible with 436A, 437B and 438A power meters (option 200) Increased measurement channels: up to three channels with two additional U2000 Series power sensors connected using the optional USB hosts Automated frequency/power sweep measurements with the optional external trigger in/out feature
-
Power Supply
HP-Agilent/Keysight E3620A
50W Dual Output Power Supply, Two 25V, 1A
Keysight basic DC power supplies offer essential features for a tight budget.
The multiple output, 35-50 W, E3620A and E3630A provide dual and triple outputs; small, compact size for bench use; low-noise and excellent regulation; and overload indicator to monitor output.
The Keysight 50W, dual output E3620A has two clean, reliable outputs for general purpose application; and is compact, affordable for versatile benchtop testing.Output ratings (Maximum current is derated 3.3% per °C from 40°C to 55°C)
> Output 1: 0 to 25 V, 0 to 1 A
> Output 2: 0 to 25 V, 0 to 1 A
> Power (max): 50 WRipple & noise from 20 Hz to 20 MHz
> Normal Mode Voltage rms: 350 µV
> Peak-to-Peak: 1.5 mVLoad & line regulation
> 0.01% + 2mVMeter resolution
> Voltage: 10 mV (0-20 V), 100 mV, (>20 V)
> Current: 1 mA -
ELECTRICAL SAFETY ANALYZER
CHROMA 19032
I test di sicurezza elettrica sono un elemento importante nei test di qualità dei prodotti elettrici. Tutti i prodotti elettrici come adattatori, SMPS, cariche, elettrodomestici, prodotti informatici e prodotti video devono essere sottoposti a test di sicurezza elettrica.
La serie 19032 combina i test Hipot, Resistenza di isolamento (IR), Ground Bond (GB), Corrente di dispersione (LC) / LC LC / CC LC e Funzione dinamica. Il risparmio di spazio può arrivare fino al 50% dello spazio della linea di produzione, non acquistando più strumenti di test di sicurezza. Il 19032 è in grado di aumentare l’efficienza dei test di sicurezza elettrica durante la produzione e ridurre i costi di manodopera associati.
-
Power Supply
METAF MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply
The MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply is a equipment with high stability, high reliability, low noise, its output voltage or current can be continuously adjusted, and its constant voltage and current can auto-conversion. This low cost and universal power supply can be used in many different areas, from test of R&D equipment to test of production lines.
Features:
– Output off function
– Triple independent DC outputs. Two adjustable and one fixed output
– Independent, series and parallel variety output
– Constant voltage and constant current
– Low ripple and noise
– Four LED displays with 3 digits, selectable for two sets output voltage and current display simultaneously
– 16 hours continuous output with full load
– Auto tracking outputIndependent output:
CH1: 0-30V/0-05A
CH2: 0-30V/0-05A
CH3: 5V/1ASerial output:
CH1+CH2: 0-60V/0-5AParallel output:
CH1+CH2: 0-30V/0-10ASpecification:
Line Regulation: CV 1X10^-4+3mV CC 2X10^-3+3mA CH3 5mV
Load Regulation: CV 1X10^-4+4mV CC 2X10^-3+3mA CH3 15mV
Ripple & Noise: CV 1mVrms CC 3mA rms CH3 2mV
Display Accuracy: ±(0.5%Rdg+2digits)
Input Voltage: 110~127VAC±10%, 220~240VAC±10%
Dimensions (L x W x D): 250x135x460mm
Weight: 8,2 kg -
Module
HP-Agilent/Keysight N6731B
Keysight basic modules provide stable output, device protection, and accurate measurements. A single range allows programming voltages and currents from 0 V and 0 A to their maximum voltage and current rating. Use 2-wire local sense or 4-wire remote sense to improve regulation. All modules feature a quick disconnect connector.
Programmable output voltages: 0 to 150 V
Output power: 50 to 300 W
Voltage accuracy: 0.1% + 19 mV (5V output)
Ripple and noise 10 mV (5V output)
Up and down-programming with resistive load typically 20 msOvervoltage, overcurrent, and overtemperature protection
Basic modules are single wide allowing four per mainframe
Modules can operate at lower output power to stay within mainframe rating
Modules include a quick disconnect connector
Datasheet -
-
Power Supply
AGILENT-Hp/Keysight E3631A
The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package.
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 A
Programming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms Readback Accuracy at 25°C ±5° 1200W, DC System Power Supplies,60V - 50A. Datasheet -
Power Meter
HP-Agilent/Keysight N1914A
Frequency range of 9 kHz to 110 GHz (sensor dependent) Wide dynamic range of -70 to +44 dBm (sensor dependent) Speed improvement by 2X for E-Series sensors: up to 400 readings/sec Go beyond GPIB with LAN LXI-C and USB connectivity Code-compatible with E4418B, E4419B power meters Code-compatible with 436A, 437B and 438A power meters (option 200) Increased measurement channels: up to three channels with two additional U2000 Series power sensors connected using the optional USB hosts Automated frequency/power sweep measurements with the optional external trigger in/out feature