ItalianoShop
Showing 811–840 of 1386 results
-
Mainframe
Tektronix TM502A
Tektronix TM502A Power Module, 2 Compartment
The TM502A power module accepts up to 2 single width TM500 series modules.
Features:Compartments: 2
Compatibility: TM500 series plug-ins
100, 110, 120, 200, 240 Vac; 48-400 Hz operation
Weight: 9 lb; Size: 140 mm (5.5 in)H x 145 mm (5.7 in)W x 407 mm (16.0 in)D
DatasheetSKU: 432 -
Power Supply
HP-Agilent/Keysight E3610A
Agilent basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 30W, single output E3610A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C) – Range 1: 0 to 8 V, 0 to 3 A – Range 2: 0 to 15 V, 0 to 2 A – Power (max): 30 W Ripple & Noise from 20 Hz to 20 MHz – Voltage rms: 200 µV – Peak-to-Peak: 2 mV Load & Line Regulation – 0.01% + 2 mV Meter Resolution – Voltage: 10 mV – Current: 10 mA
SKU: 800 -
Multifunction Switch/Measure Unit
HP-Agilent/Keysight 34980A
The Agilent 34980A is a flexible, reliable switching and data acquisition platform with more than 20 modules to help you customize your test system.
Key Features & Specifications:
– Eight-slot mainframe, choice of 21-plug-in modules 34980A Multifunction Switch/Measure Unit Summary
– Built-in DMM with 6½ digits (22 bits) of resolution
– Scan rates of up to 1000 channels/second
– Standard LAN, USB, and GPIB connectivity to PC, LXI compliant
– Easy remote access with built-in Web interface
– Up to 560 2-wire mux or 4096 matrix cross-points in one mainframeSKU: 1015 -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mASKU: n/a -
PEAK POWER SENSOR
HP 8991A Peak Power Meter
The HP 8991A peak power analyzer provides complete and accurate characterization of today's complex pulsed signals. It is capable of performing seven automatic timing measurements (rise time, fall time, pulse width, PRI, PRF, duty cycle, and delay) and five automatic power measurement (peak power, average power, pulse top/base amplitude, and overshoot) with push-button ease. Front-panel operation is intuitive and straightforward. Data entries can be typed in or made with the front panel knob; automatic measurements are made with simple keystroke. The 8990A offers two sensor channels plus two external triggering/oscilloscope channels, allowing the simultaneous measurement of modulating signals and detector power envelopes.
* Amplitude and time markers for measuring power exactly where its needed
* Two oscilloscope channels for measuring time delay between video and microwave pulse
* Versatile triggering enables the capturing of exclusive glitches
* Waveform math functions for measuring scalar pulse parameters
* Dynamic Range: >45 dB
* Minimum Pulse Width: 20 ns
* Rise Time: <5 ns * Sensor and Video Inputs: 1 and 4; 2 and 3SKU: n/a -
Pulse Pattern Generator
TEKTRONIX PG 501
PULSE GENERATOR.
The PG501 provides simultaneous positive and negative 50 MHz output pulses with 5 ns rise and fall times and independently variable amplitudes from 0.5 V to 5 V into 50 Ω.
Front panel controls provide calibrated decade selection of pulse period from 20 ns to 20 ms, and duration from 10 ns to 10 ms. Uncalibrated pulse period from 20 ns to 0.2 s and duration from 10 ns to 0.1 s can be obtained with the variable control.
The PG501 has a gate input and a 10 ns pre-trigger output.SKU: n/a -
RF Impedance/Material Analyzer
HP-Agilent/Keysight 4291B
Four component test fixtures (DUT size: 0.5 mm to 20 mm)
Independent parameter selection in 2 channels
Direct read-out permittivity, permeability (option)
Two material fixtures (operating temperature: -55deg C to + 200deg C)
Versatile analysis (temperature, cole-cole plot, relaxation time)
Sweep parameters (frequency, ac level, dc bias, temperature)The Keysight 4291B RF impedance / material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric / magnetic materials. The Keysight 4291B uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range.
Basic impedance accuracy is +/- 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT / MUT.
The Hp 4291B also provides automatic level control and monitor of test signals by using IBASIC programming function; devices can be measured under a constant voltage or current. Measure bias dependent impedance characteristics with optional dc bias (up to 40 V and 100 mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models.
The Hp 4291B has two measurement channels; each channel can be set to measure a single (e.g. Z) or dual (e.g. Z-theta) impedance parameter. The color TFT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format. With built-in IBASIC, you can control external test equipment such as a temperature chamber or wafer prober directly from the Keysight 4291B. You do not need a separate instrument controller.
Material Evaluation
The Hp 4291B enables easy and sophisticated material evaluation and improves material evaluation quality and efficiency. The Hp 4291B provides the total dielectric / magnetic material measurement solutions in wide frequency range (1 MHz to 1 GHz).
DatasheetSKU: n/a
-
Mainframe
Tektronix TM502A
Tektronix TM502A Power Module, 2 Compartment
The TM502A power module accepts up to 2 single width TM500 series modules.
Features:Compartments: 2
Compatibility: TM500 series plug-ins
100, 110, 120, 200, 240 Vac; 48-400 Hz operation
Weight: 9 lb; Size: 140 mm (5.5 in)H x 145 mm (5.7 in)W x 407 mm (16.0 in)D
Datasheet -
Power Supply
HP-Agilent/Keysight E3610A
Agilent basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 30W, single output E3610A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C) – Range 1: 0 to 8 V, 0 to 3 A – Range 2: 0 to 15 V, 0 to 2 A – Power (max): 30 W Ripple & Noise from 20 Hz to 20 MHz – Voltage rms: 200 µV – Peak-to-Peak: 2 mV Load & Line Regulation – 0.01% + 2 mV Meter Resolution – Voltage: 10 mV – Current: 10 mA
-
Multifunction Switch/Measure Unit
HP-Agilent/Keysight 34980A
The Agilent 34980A is a flexible, reliable switching and data acquisition platform with more than 20 modules to help you customize your test system.
Key Features & Specifications:
– Eight-slot mainframe, choice of 21-plug-in modules 34980A Multifunction Switch/Measure Unit Summary
– Built-in DMM with 6½ digits (22 bits) of resolution
– Scan rates of up to 1000 channels/second
– Standard LAN, USB, and GPIB connectivity to PC, LXI compliant
– Easy remote access with built-in Web interface
– Up to 560 2-wire mux or 4096 matrix cross-points in one mainframe -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mA -
PEAK POWER SENSOR
HP 8991A Peak Power Meter
The HP 8991A peak power analyzer provides complete and accurate characterization of today's complex pulsed signals. It is capable of performing seven automatic timing measurements (rise time, fall time, pulse width, PRI, PRF, duty cycle, and delay) and five automatic power measurement (peak power, average power, pulse top/base amplitude, and overshoot) with push-button ease. Front-panel operation is intuitive and straightforward. Data entries can be typed in or made with the front panel knob; automatic measurements are made with simple keystroke. The 8990A offers two sensor channels plus two external triggering/oscilloscope channels, allowing the simultaneous measurement of modulating signals and detector power envelopes.
* Amplitude and time markers for measuring power exactly where its needed
* Two oscilloscope channels for measuring time delay between video and microwave pulse
* Versatile triggering enables the capturing of exclusive glitches
* Waveform math functions for measuring scalar pulse parameters
* Dynamic Range: >45 dB
* Minimum Pulse Width: 20 ns
* Rise Time: <5 ns * Sensor and Video Inputs: 1 and 4; 2 and 3 -
Pulse Pattern Generator
TEKTRONIX PG 501
PULSE GENERATOR.
The PG501 provides simultaneous positive and negative 50 MHz output pulses with 5 ns rise and fall times and independently variable amplitudes from 0.5 V to 5 V into 50 Ω.
Front panel controls provide calibrated decade selection of pulse period from 20 ns to 20 ms, and duration from 10 ns to 10 ms. Uncalibrated pulse period from 20 ns to 0.2 s and duration from 10 ns to 0.1 s can be obtained with the variable control.
The PG501 has a gate input and a 10 ns pre-trigger output. -
RF Impedance/Material Analyzer
HP-Agilent/Keysight 4291B
Four component test fixtures (DUT size: 0.5 mm to 20 mm)
Independent parameter selection in 2 channels
Direct read-out permittivity, permeability (option)
Two material fixtures (operating temperature: -55deg C to + 200deg C)
Versatile analysis (temperature, cole-cole plot, relaxation time)
Sweep parameters (frequency, ac level, dc bias, temperature)The Keysight 4291B RF impedance / material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric / magnetic materials. The Keysight 4291B uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range.
Basic impedance accuracy is +/- 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT / MUT.
The Hp 4291B also provides automatic level control and monitor of test signals by using IBASIC programming function; devices can be measured under a constant voltage or current. Measure bias dependent impedance characteristics with optional dc bias (up to 40 V and 100 mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models.
The Hp 4291B has two measurement channels; each channel can be set to measure a single (e.g. Z) or dual (e.g. Z-theta) impedance parameter. The color TFT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format. With built-in IBASIC, you can control external test equipment such as a temperature chamber or wafer prober directly from the Keysight 4291B. You do not need a separate instrument controller.
Material Evaluation
The Hp 4291B enables easy and sophisticated material evaluation and improves material evaluation quality and efficiency. The Hp 4291B provides the total dielectric / magnetic material measurement solutions in wide frequency range (1 MHz to 1 GHz).
Datasheet
-
Mainframe
Tektronix TM502A
Tektronix TM502A Power Module, 2 Compartment
The TM502A power module accepts up to 2 single width TM500 series modules.
Features:Compartments: 2
Compatibility: TM500 series plug-ins
100, 110, 120, 200, 240 Vac; 48-400 Hz operation
Weight: 9 lb; Size: 140 mm (5.5 in)H x 145 mm (5.7 in)W x 407 mm (16.0 in)D
Datasheet -
Power Supply
HP-Agilent/Keysight E3610A
Agilent basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 30W, single output E3610A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C) – Range 1: 0 to 8 V, 0 to 3 A – Range 2: 0 to 15 V, 0 to 2 A – Power (max): 30 W Ripple & Noise from 20 Hz to 20 MHz – Voltage rms: 200 µV – Peak-to-Peak: 2 mV Load & Line Regulation – 0.01% + 2 mV Meter Resolution – Voltage: 10 mV – Current: 10 mA
-
Multifunction Switch/Measure Unit
HP-Agilent/Keysight 34980A
The Agilent 34980A is a flexible, reliable switching and data acquisition platform with more than 20 modules to help you customize your test system.
Key Features & Specifications:
– Eight-slot mainframe, choice of 21-plug-in modules 34980A Multifunction Switch/Measure Unit Summary
– Built-in DMM with 6½ digits (22 bits) of resolution
– Scan rates of up to 1000 channels/second
– Standard LAN, USB, and GPIB connectivity to PC, LXI compliant
– Easy remote access with built-in Web interface
– Up to 560 2-wire mux or 4096 matrix cross-points in one mainframe -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mA -
PEAK POWER SENSOR
HP 8991A Peak Power Meter
The HP 8991A peak power analyzer provides complete and accurate characterization of today's complex pulsed signals. It is capable of performing seven automatic timing measurements (rise time, fall time, pulse width, PRI, PRF, duty cycle, and delay) and five automatic power measurement (peak power, average power, pulse top/base amplitude, and overshoot) with push-button ease. Front-panel operation is intuitive and straightforward. Data entries can be typed in or made with the front panel knob; automatic measurements are made with simple keystroke. The 8990A offers two sensor channels plus two external triggering/oscilloscope channels, allowing the simultaneous measurement of modulating signals and detector power envelopes.
* Amplitude and time markers for measuring power exactly where its needed
* Two oscilloscope channels for measuring time delay between video and microwave pulse
* Versatile triggering enables the capturing of exclusive glitches
* Waveform math functions for measuring scalar pulse parameters
* Dynamic Range: >45 dB
* Minimum Pulse Width: 20 ns
* Rise Time: <5 ns * Sensor and Video Inputs: 1 and 4; 2 and 3 -
Pulse Pattern Generator
TEKTRONIX PG 501
PULSE GENERATOR.
The PG501 provides simultaneous positive and negative 50 MHz output pulses with 5 ns rise and fall times and independently variable amplitudes from 0.5 V to 5 V into 50 Ω.
Front panel controls provide calibrated decade selection of pulse period from 20 ns to 20 ms, and duration from 10 ns to 10 ms. Uncalibrated pulse period from 20 ns to 0.2 s and duration from 10 ns to 0.1 s can be obtained with the variable control.
The PG501 has a gate input and a 10 ns pre-trigger output. -
RF Impedance/Material Analyzer
HP-Agilent/Keysight 4291B
Four component test fixtures (DUT size: 0.5 mm to 20 mm)
Independent parameter selection in 2 channels
Direct read-out permittivity, permeability (option)
Two material fixtures (operating temperature: -55deg C to + 200deg C)
Versatile analysis (temperature, cole-cole plot, relaxation time)
Sweep parameters (frequency, ac level, dc bias, temperature)The Keysight 4291B RF impedance / material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric / magnetic materials. The Keysight 4291B uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range.
Basic impedance accuracy is +/- 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT / MUT.
The Hp 4291B also provides automatic level control and monitor of test signals by using IBASIC programming function; devices can be measured under a constant voltage or current. Measure bias dependent impedance characteristics with optional dc bias (up to 40 V and 100 mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models.
The Hp 4291B has two measurement channels; each channel can be set to measure a single (e.g. Z) or dual (e.g. Z-theta) impedance parameter. The color TFT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format. With built-in IBASIC, you can control external test equipment such as a temperature chamber or wafer prober directly from the Keysight 4291B. You do not need a separate instrument controller.
Material Evaluation
The Hp 4291B enables easy and sophisticated material evaluation and improves material evaluation quality and efficiency. The Hp 4291B provides the total dielectric / magnetic material measurement solutions in wide frequency range (1 MHz to 1 GHz).
Datasheet