Senza categoria
Showing all 20 results
-
Senza categoria
Purex 072065 Solder Fume Extract Arm
The Fume cube is designed to protect personnel from inhaling hazardous dust and fumes which are generated during a wide variety of applications, such as tinning and potting, gluing and chemical treatments, soldering assembly, rework and repair.
• 230 V c.a. 50/60 Hz
• 140 W
• 60 dBA
DatasheetSKU: n/a€500.00 View Product -
Senza categoria
COMET CMTT 15EE Electromechanical pressure testing machine
Electromechanical pressure testing machine mod. CMT15EE is made specifically for bending wires by mini applicators, the terminals are powered by the coil.
The induction braking system has allowed the implementation of a practically silent press, also solving the problem of maintenance and replacement of the brakes, which distinguishes this system from traditional electromechanical ones.
The cooling system with solenoid valve and compact size make it particularly suitable for use on automatic lines.
The crimping machine is complete with safety systems, a roll holder, an operating manual and a set of keys.
SKU: n/a -
Senza categoria
EWIG CR200 Crucible for the tinning and rewinding of copper wires
EWIG CR200 Crucible for the tinning and rewinding of copper wires
Compatible with lead-free alloys
Electronic regulation of power and temperature from 0 to 500 ° C
200W-230V ~ 2000 10 504
200W-230V ~ 2000 10 553SKU: n/a -
Senza categoria
LUKEY 850D SMD REWORK STATION – HOT AIR SOLDERING STATION
Lukey 850D is a hot air single-channel soldering/desoldering station for working with SMD, QFP, PLCC, SOP, SOIC, CHIP, BGA components.
· Ultra-fast heating up to the required temperature.
· Temperature and blast control of the hot air station.
· Temperature control of the air stream by means of digital display and microprocessor system using “UP” and “DOWN” buttons with +/- 1C accuracy.
· Set automatic interrupting time at 30, 60 minutes and permanently (Sleep Timer) to prolong life time of the heating element.
· Station is completed with 4 exchangeable tips with different diameter to ensure universal application of the equipment.
· Heating element type: metallic incandescent wire
· Compressor type: diaphragm pump
· Airstream: 23 l/min (max)
· Operating surface resistivity on the
· Light and handy hot air station handle.
· Digital indication of real and fixed temperature
· Operating temperature range of hot air station: 100 – 420C “case”: up to 2Ohm
· ”Case” – to – operating surface potential difference: up to 2mV
· Galvanic isolation
· Made from anti-static materials.
· Hot air station power – 350W
· Automatic retroactive temperature control, holding up of constant temperature, irrespective of airspeed.
· Automatic cooling system. After soldering station is switched off, the hot air station is cold aired falling up less then 50C. This option prevents casual burns and prolongs the life time of the heating element.
· Supply voltage of the station: 220-240V AC
· Power consumption: 300W
· Heating element power consumption: 250W
· Compressor power consumption: 20W
SKU: n/a -
Senza categoria
M/A-COM MICROWAVE POWER DEVICES AMPLIFIER 2-400 MHZ 200 WATTS
AMPLIFICATORE M/A-COM MICROWAVE POWER DEVICES,INC. HAUPPAUGE, N.Y. 11788
M/A-COM MICROWAVE POWER DEVICES SOLID STATE AMPLIFIER 1040-22/6140 + EWAL 0230-22/6140 + FILTER SWITCHING UNIT FS0240-22/6140 + EWAL 3010-22/6140SKU: n/a -
Power Detectore
GIGA-TRONICS 16936
The 16936 is a 18.5 GHz rf sensor from Gigatronics. Electronic test equipment sensors measure the power of waveforms, such as multi-tone and modulated radiofrequency (RF) waveforms. Sensors gather highly accurate modulation measurements using diode detectors.
The Gigatronics 16936 Peak Power Sensor was built for use with the Gigatronics 8501, 8501A, 8502, and 8502A power-meters. The 16936 provides both pulsed and cw measurements.Features of the Gigatronics 16936 sensor include:
Frequency range: 750 MHz to 18.5 GHz
Peak Measurement range: -20 dBm to +20 dBm
CW Measurement range: -40 dBm to +20 dBm
50 ohm input impedance
N (m) connector
DatasheetSKU: n/a -
Senza categoria
IFR FM/AM1200S Communications Service Monitor, 250 kHz -1 GHz
The IFR FM/AM-1200S is a bench tester multi-function, microprocessor controlled Communications Service Monitors designed to meet the requirements of most radio maintenance applications throughout the RF frequency range of 250 kHz to 1 GHz.
Functions from mobile, aircraft or marine is achievable straight from 11 to 28 volt DC power systems, using a furnished cigar lighter adaptor plug. AC power function is probable from 115/230 VAC 47 to 420 Hz power services.* FM and AM Signal Generator
* 2 µV Receiver for AM, FM, and SSB
* RF Frequency Error Meter with 1 Hz ResolutionSKU: n/a -
Senza categoria
Rohde & Schwarz CMD57 Digital RadioCommunication Tester
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress.SKU: n/a -
Senza categoria
WAVETEK SAM 4040
The WAVETEK SAM 4040 is an Advanced HFC Signal Analysis Meter 5 Mhz to 1 GHz.
Wavetek’s SAM 4040, a next generation signal analysis meter, is more like a hand-held broadband communication service monitor, with a broad scope of practical test capabilities. It performs essential cable TV system preventive maintenance tests with accuracy and ease. Signal levels, hum, and C/N can be quickly tested without interrupting subscribers reception. In no time, technicians are up and running the full range of tests with unprecedented speed. The hand-held, lightweight, rugged, and water resistant SAM 4040 utilizes down-sized electronics including surface mount components and multilayer PC boards. The measurement information is clearly displayed on a high resolution (320 X 240) LCD.
The SAM 4040 is the first signal level meter available with Wavetek’s trademarked Sweepless Sweep, in which active system carriers are measured and compared to a stored reference to
determine system frequency response.SKU: n/a
-
Senza categoria
Purex 072065 Solder Fume Extract Arm
The Fume cube is designed to protect personnel from inhaling hazardous dust and fumes which are generated during a wide variety of applications, such as tinning and potting, gluing and chemical treatments, soldering assembly, rework and repair.
• 230 V c.a. 50/60 Hz
• 140 W
• 60 dBA
Datasheet -
Senza categoria
COMET CMTT 15EE Electromechanical pressure testing machine
Electromechanical pressure testing machine mod. CMT15EE is made specifically for bending wires by mini applicators, the terminals are powered by the coil.
The induction braking system has allowed the implementation of a practically silent press, also solving the problem of maintenance and replacement of the brakes, which distinguishes this system from traditional electromechanical ones.
The cooling system with solenoid valve and compact size make it particularly suitable for use on automatic lines.
The crimping machine is complete with safety systems, a roll holder, an operating manual and a set of keys.
-
Senza categoria
LUKEY 850D SMD REWORK STATION – HOT AIR SOLDERING STATION
Lukey 850D is a hot air single-channel soldering/desoldering station for working with SMD, QFP, PLCC, SOP, SOIC, CHIP, BGA components.
· Ultra-fast heating up to the required temperature.
· Temperature and blast control of the hot air station.
· Temperature control of the air stream by means of digital display and microprocessor system using “UP” and “DOWN” buttons with +/- 1C accuracy.
· Set automatic interrupting time at 30, 60 minutes and permanently (Sleep Timer) to prolong life time of the heating element.
· Station is completed with 4 exchangeable tips with different diameter to ensure universal application of the equipment.
· Heating element type: metallic incandescent wire
· Compressor type: diaphragm pump
· Airstream: 23 l/min (max)
· Operating surface resistivity on the
· Light and handy hot air station handle.
· Digital indication of real and fixed temperature
· Operating temperature range of hot air station: 100 – 420C “case”: up to 2Ohm
· ”Case” – to – operating surface potential difference: up to 2mV
· Galvanic isolation
· Made from anti-static materials.
· Hot air station power – 350W
· Automatic retroactive temperature control, holding up of constant temperature, irrespective of airspeed.
· Automatic cooling system. After soldering station is switched off, the hot air station is cold aired falling up less then 50C. This option prevents casual burns and prolongs the life time of the heating element.
· Supply voltage of the station: 220-240V AC
· Power consumption: 300W
· Heating element power consumption: 250W
· Compressor power consumption: 20W
-
Power Detectore
GIGA-TRONICS 16936
The 16936 is a 18.5 GHz rf sensor from Gigatronics. Electronic test equipment sensors measure the power of waveforms, such as multi-tone and modulated radiofrequency (RF) waveforms. Sensors gather highly accurate modulation measurements using diode detectors.
The Gigatronics 16936 Peak Power Sensor was built for use with the Gigatronics 8501, 8501A, 8502, and 8502A power-meters. The 16936 provides both pulsed and cw measurements.Features of the Gigatronics 16936 sensor include:
Frequency range: 750 MHz to 18.5 GHz
Peak Measurement range: -20 dBm to +20 dBm
CW Measurement range: -40 dBm to +20 dBm
50 ohm input impedance
N (m) connector
Datasheet -
Senza categoria
IFR FM/AM1200S Communications Service Monitor, 250 kHz -1 GHz
The IFR FM/AM-1200S is a bench tester multi-function, microprocessor controlled Communications Service Monitors designed to meet the requirements of most radio maintenance applications throughout the RF frequency range of 250 kHz to 1 GHz.
Functions from mobile, aircraft or marine is achievable straight from 11 to 28 volt DC power systems, using a furnished cigar lighter adaptor plug. AC power function is probable from 115/230 VAC 47 to 420 Hz power services.* FM and AM Signal Generator
* 2 µV Receiver for AM, FM, and SSB
* RF Frequency Error Meter with 1 Hz Resolution -
Senza categoria
Rohde & Schwarz CMD57 Digital RadioCommunication Tester
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress. -
Senza categoria
WAVETEK SAM 4040
The WAVETEK SAM 4040 is an Advanced HFC Signal Analysis Meter 5 Mhz to 1 GHz.
Wavetek’s SAM 4040, a next generation signal analysis meter, is more like a hand-held broadband communication service monitor, with a broad scope of practical test capabilities. It performs essential cable TV system preventive maintenance tests with accuracy and ease. Signal levels, hum, and C/N can be quickly tested without interrupting subscribers reception. In no time, technicians are up and running the full range of tests with unprecedented speed. The hand-held, lightweight, rugged, and water resistant SAM 4040 utilizes down-sized electronics including surface mount components and multilayer PC boards. The measurement information is clearly displayed on a high resolution (320 X 240) LCD.
The SAM 4040 is the first signal level meter available with Wavetek’s trademarked Sweepless Sweep, in which active system carriers are measured and compared to a stored reference to
determine system frequency response.
-
Senza categoria
Purex 072065 Solder Fume Extract Arm
The Fume cube is designed to protect personnel from inhaling hazardous dust and fumes which are generated during a wide variety of applications, such as tinning and potting, gluing and chemical treatments, soldering assembly, rework and repair.
• 230 V c.a. 50/60 Hz
• 140 W
• 60 dBA
Datasheet€500.00 View Product -
Senza categoria
COMET CMTT 15EE Electromechanical pressure testing machine
Electromechanical pressure testing machine mod. CMT15EE is made specifically for bending wires by mini applicators, the terminals are powered by the coil.
The induction braking system has allowed the implementation of a practically silent press, also solving the problem of maintenance and replacement of the brakes, which distinguishes this system from traditional electromechanical ones.
The cooling system with solenoid valve and compact size make it particularly suitable for use on automatic lines.
The crimping machine is complete with safety systems, a roll holder, an operating manual and a set of keys.
-
Senza categoria
LUKEY 850D SMD REWORK STATION – HOT AIR SOLDERING STATION
Lukey 850D is a hot air single-channel soldering/desoldering station for working with SMD, QFP, PLCC, SOP, SOIC, CHIP, BGA components.
· Ultra-fast heating up to the required temperature.
· Temperature and blast control of the hot air station.
· Temperature control of the air stream by means of digital display and microprocessor system using “UP” and “DOWN” buttons with +/- 1C accuracy.
· Set automatic interrupting time at 30, 60 minutes and permanently (Sleep Timer) to prolong life time of the heating element.
· Station is completed with 4 exchangeable tips with different diameter to ensure universal application of the equipment.
· Heating element type: metallic incandescent wire
· Compressor type: diaphragm pump
· Airstream: 23 l/min (max)
· Operating surface resistivity on the
· Light and handy hot air station handle.
· Digital indication of real and fixed temperature
· Operating temperature range of hot air station: 100 – 420C “case”: up to 2Ohm
· ”Case” – to – operating surface potential difference: up to 2mV
· Galvanic isolation
· Made from anti-static materials.
· Hot air station power – 350W
· Automatic retroactive temperature control, holding up of constant temperature, irrespective of airspeed.
· Automatic cooling system. After soldering station is switched off, the hot air station is cold aired falling up less then 50C. This option prevents casual burns and prolongs the life time of the heating element.
· Supply voltage of the station: 220-240V AC
· Power consumption: 300W
· Heating element power consumption: 250W
· Compressor power consumption: 20W
-
Power Detectore
GIGA-TRONICS 16936
The 16936 is a 18.5 GHz rf sensor from Gigatronics. Electronic test equipment sensors measure the power of waveforms, such as multi-tone and modulated radiofrequency (RF) waveforms. Sensors gather highly accurate modulation measurements using diode detectors.
The Gigatronics 16936 Peak Power Sensor was built for use with the Gigatronics 8501, 8501A, 8502, and 8502A power-meters. The 16936 provides both pulsed and cw measurements.Features of the Gigatronics 16936 sensor include:
Frequency range: 750 MHz to 18.5 GHz
Peak Measurement range: -20 dBm to +20 dBm
CW Measurement range: -40 dBm to +20 dBm
50 ohm input impedance
N (m) connector
Datasheet -
Senza categoria
IFR FM/AM1200S Communications Service Monitor, 250 kHz -1 GHz
The IFR FM/AM-1200S is a bench tester multi-function, microprocessor controlled Communications Service Monitors designed to meet the requirements of most radio maintenance applications throughout the RF frequency range of 250 kHz to 1 GHz.
Functions from mobile, aircraft or marine is achievable straight from 11 to 28 volt DC power systems, using a furnished cigar lighter adaptor plug. AC power function is probable from 115/230 VAC 47 to 420 Hz power services.* FM and AM Signal Generator
* 2 µV Receiver for AM, FM, and SSB
* RF Frequency Error Meter with 1 Hz Resolution -
Senza categoria
Rohde & Schwarz CMD57 Digital RadioCommunication Tester
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress. -
Senza categoria
WAVETEK SAM 4040
The WAVETEK SAM 4040 is an Advanced HFC Signal Analysis Meter 5 Mhz to 1 GHz.
Wavetek’s SAM 4040, a next generation signal analysis meter, is more like a hand-held broadband communication service monitor, with a broad scope of practical test capabilities. It performs essential cable TV system preventive maintenance tests with accuracy and ease. Signal levels, hum, and C/N can be quickly tested without interrupting subscribers reception. In no time, technicians are up and running the full range of tests with unprecedented speed. The hand-held, lightweight, rugged, and water resistant SAM 4040 utilizes down-sized electronics including surface mount components and multilayer PC boards. The measurement information is clearly displayed on a high resolution (320 X 240) LCD.
The SAM 4040 is the first signal level meter available with Wavetek’s trademarked Sweepless Sweep, in which active system carriers are measured and compared to a stored reference to
determine system frequency response.