ItalianoShop
Showing 331–360 of 1499 results
-
GPIB INTERFACE MODULE
HP-Agilent/Keysight N2757A
AGILENT N2757A – GPIB INTERFACE MODULE N2757A is a GPIB interface module for fast data transfers. If you need fast data transfers, equip your 5462X oscilloscope with GPIB communication. Keysight offers the N2757A GPIB interface module to provide a GPIB port for your oscilloscope.
SKU: 1066 -
Power Supply
HP-Agilent/Keysight E3614A
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 48W, single output E3614A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. – Range 1: 0 to 8 V, 0 to 6 A. – Range 2: NA. – Power (max): 48 W. – Voltage rms: 200 µV. – Peak-to-Peak: 1 mV. – 0.01% + 2 mV. – Voltage: 10 mV. – Current: 10 mA. 48W, 8V, 6A
SKU: 1101 -
ELECTRICAL SAFETY ANALYZER
CHROMA 19032
I test di sicurezza elettrica sono un elemento importante nei test di qualità dei prodotti elettrici. Tutti i prodotti elettrici come adattatori, SMPS, cariche, elettrodomestici, prodotti informatici e prodotti video devono essere sottoposti a test di sicurezza elettrica.
La serie 19032 combina i test Hipot, Resistenza di isolamento (IR), Ground Bond (GB), Corrente di dispersione (LC) / LC LC / CC LC e Funzione dinamica. Il risparmio di spazio può arrivare fino al 50% dello spazio della linea di produzione, non acquistando più strumenti di test di sicurezza. Il 19032 è in grado di aumentare l’efficienza dei test di sicurezza elettrica durante la produzione e ridurre i costi di manodopera associati.
SKU: n/a -
Power Supply
METAF MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply
The MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply is a equipment with high stability, high reliability, low noise, its output voltage or current can be continuously adjusted, and its constant voltage and current can auto-conversion. This low cost and universal power supply can be used in many different areas, from test of R&D equipment to test of production lines.
Features:
– Output off function
– Triple independent DC outputs. Two adjustable and one fixed output
– Independent, series and parallel variety output
– Constant voltage and constant current
– Low ripple and noise
– Four LED displays with 3 digits, selectable for two sets output voltage and current display simultaneously
– 16 hours continuous output with full load
– Auto tracking outputIndependent output:
CH1: 0-30V/0-05A
CH2: 0-30V/0-05A
CH3: 5V/1ASerial output:
CH1+CH2: 0-60V/0-5AParallel output:
CH1+CH2: 0-30V/0-10ASpecification:
Line Regulation: CV 1X10^-4+3mV CC 2X10^-3+3mA CH3 5mV
Load Regulation: CV 1X10^-4+4mV CC 2X10^-3+3mA CH3 15mV
Ripple & Noise: CV 1mVrms CC 3mA rms CH3 2mV
Display Accuracy: ±(0.5%Rdg+2digits)
Input Voltage: 110~127VAC±10%, 220~240VAC±10%
Dimensions (L x W x D): 250x135x460mm
Weight: 8,2 kgSKU: n/a -
Module
HP-Agilent/Keysight N6731B
Keysight basic modules provide stable output, device protection, and accurate measurements. A single range allows programming voltages and currents from 0 V and 0 A to their maximum voltage and current rating. Use 2-wire local sense or 4-wire remote sense to improve regulation. All modules feature a quick disconnect connector.
Programmable output voltages: 0 to 150 V
Output power: 50 to 300 W
Voltage accuracy: 0.1% + 19 mV (5V output)
Ripple and noise 10 mV (5V output)
Up and down-programming with resistive load typically 20 msOvervoltage, overcurrent, and overtemperature protection
Basic modules are single wide allowing four per mainframe
Modules can operate at lower output power to stay within mainframe rating
Modules include a quick disconnect connector
DatasheetSKU: n/a -
Power Supply
AGILENT-Hp/Keysight E3631A
Output Ratings
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 AProgramming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mARipple and Noise (20 Hz to 20 MHz)
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Readback Accuracy at 25°C ±5°C Voltage: 0.05% + 10 mV, 0.05% + 10 mV, 0.1% + 5 mV Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA Keysight basic DC power supplies offer essential features for a tight budget. The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package. Datasheet
SKU: n/a -
HANDLED RECORDER
BK PRECISION DAS30
The DAS 30/50/60 high-speed multi-function data acquisition recorders feature versatile channel configurability, high-speed sampling (1 MSa/s), a wide input range (±5 mV to ±500 V), large internal solid-state memory of up to 64 GB, and 9.5 hours of battery life. Combined with the CAT III isolation rating, these multifunction data acquisition systems are well suited for a wide variety of applications including maintenance and electrical power analysis.
Each channel can record a different measurement type such as voltage, temperature (thermocouple or RTD), current or frequency simultaneously, using a common time base. The 10-inch touchscreen features unlimited data scrolling, zoom in/out function as well as drag and drop delta cursors for precision measurements.
SKU: n/a -
Probe Offset Control and Power Module
HP-Agilent/Keysight 1143A
Keysight’s 1143A probe offset control and power module provides power and independent offset control for the Keysight 54700 Series probes. The probe’s offset is controllable via a nine-pin, D-subminiature connector on the rear panel. The ±50 V offset capability extends the dynamic range of the probe measurement system beyond that of many test and measurement instruments.
The Keysight 54701A active probe with the 1143A probe offset control and power module is versatile to use with any test and measurement equipment with a 50 ohm input.
programmable offset
±50 V offset
number of independently operated probes: 2
positive power output: +17.3 V ±150 mV
negative power output: -17.3 V ±150 mV
maximum current capability (both +17.3 V and -17.3 V supply): 300 mA
offset current: Variable from zero to ±5 mA
operating temperature: 0 to 55°C
operating humitity: 95% relative humidity at 40°C
net weight: 1.5 kg (3.4 lbs.)
shipping weight: 2.4 kg (5.4 lbs)
power requirements: 90 to 132 / 198 to 264 Vac, 47 to 440 Hz, 40 VA maximum
Dimensions: 211 mm (W) x 173 mm (D) x 78 mm (H) (8.3 x 6.8 x 3.1 inches)SKU: n/a -
Oscilloscope 2 channels
Rigol DS6062
DSO with 600MHz bandwidth and 5GSa/s
The Rigol DS6062 is a very high quality two channel digital storage oscilloscope. It offers up to 5GSa/s real-time sample rate and up to 600MHz bandwidth. These high performances ensure not only to capture real-time instantaneous signal, but also to observe details of repeated signal. DS6062 have up to 120.000 wfms/s refresh rate, which enable users to capture instantaneous signal and abnormal signal more quickly, to enhance waveform capturing ability, and to expedite circuit debug course. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Other advantages: 10.1″ color LCD, bright and vivid waveform display- versatile trigger modes: i.e. slope, alternative, rise&fall edge, enable users to stabilize signal more easily. In economical oscilloscope field, DS6062 have no doubt the highest performances, the most functions thus should be engineers’ best choice. Delivery including 2 probes (bandwidth 600MHz), USB cable, pc software, power adapter and manual. General Data Digital Oscilloscope Digital Oscilloscope Rigol DS6062 Display 10,1″ WVGA-Color-LCD Resolution 800 x 480 Pixel Interface 2x USB-host for i.e. USB sticks USB-Device for a PC connection or USB Pict-Bridge printerinterface LAN for network connectivity (LXI compilant) GPIB (IEE-488, General Purpose Interface Bus) using the optional USB-GPIB Module Trigger- and Calibrationoutput 10MHz reference clock In-/Out VGA interface to connect to an external monitor or projector Size in clarification Weight in clarification Supported operation systems in clarification Oscilloscope Functions Oscilloscope Functions Digital Oscilloscope Rigol DS6062 Channels 2 Real-time sample rate 5 GSa/s realtime Bandwidth 600 MHz Sampling Modus Normal, average, peak detect Mathematics userdefined, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal Bus Decoding I²C, RS232, SPI, USB, CAN and FlexRay Signal Digital Oscilloscope Rigol DS6062 Input DC/AC coupling, up to 300 Vrms CAT I Real-time sample rate up to 5 GSa/s realtime Time base in clarification Memory 140Mpts (1 Channel) Filter Hardware LPF, HPF, BPF and BRF Vertical Digital Oscilloscope Rigol DS6062 Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) in clarification Displacement range in clarification Trigger Digital Oscilloscope Rigol DS6062 Trigger in clarification Signal system and line/field frequency (Video triggering mode) in clarification Triggerfunctions Edge, Pattern, Glitch, Puls width, Sequence, Slew rate, I²C, RS232/UART, CAN, FlexRay, USB, SPI, Video Measurement Digital Oscilloscope Rigol DS6062 Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Delay1-2 (rise), Delay1-2(fall)SKU: 161 -
Termocamera
Flir E50
(Italiano) A seconda del modello di termocamera della FLIR Serie E, la capacità di risoluzione massima IR è di 320×240 pixels. Queste termocamere sono ideali per la manutenzione predittiva e le ispezioni programmate di impianti elettrici e sistemi meccanici, per assicurarne il corretto funzionamento con la massima efficienza e sicurezza e con il minimo consumo energetico.
– Risoluzione massima di 320 x 240 pixels A seconda del modello di termocamera FLIR Serie E, la risoluzione delle immagini IR va da 160×120 pixels a 320×240 pixels.
– Piccole ed ultraleggere I modelli FLIR Serie E pesano solo 825gr e possono essere facilmente trasportati all’interno del loro fodero.
– Estremamente robusta Le termocamere FLIR Serie E sopportano cadute da due metri. Sono a norma IP54.
– Fotocamera di alta qualità Le termocamere FLIR Serie E sono dotate di fotocamera digitale integrata che rende le ispezioni più semplici e veloci.
– Galleria immagini Permette di accedere facilmente alle immagini salvate e selezionare quella desiderata. – Precisione ± 2% Accuratezza ±2 °C o ±2% della lettura.
– LCD touch screen Ampio LCD touch screen a colori da 3,5″.
– Illuminatore a LED incorporato Le termocamere FLIR Serie E sono dotate di illuminatore a LED incorporato che assicura un’alta qualità delle immagini nel visibile, indipendentemente dalla luminosità dell’ambiente di lavoro. – Batteria a lunga durata La batteria al litio ha un’autonomia di 4 ore, è facilmente sostituibile sul posto e vi permetterà di mantenere gli impegni programmati. – Puntatore laser Un pulsante ergonomico attiva il puntatore laser che consente di associare il punto caldo/freddo nell’immagine IR con la posizione fisica dell’oggetto reale nel campo.
– FLIR Picture-in-Picture Utilizzando la funzione FLIR Picture-in-Picture, è estremamente semplice localizzare ed evidenziare le aree di interesse.
– FLIR Thermal Fusion Fonde le immagini visive e quelle ad infrarossi per consentire un’analisi migliore.
– Report immediati Creazione immediata di report direttamente nella termocamera, facilmente copiabili su USB. (FLIR E60)
– Annotazioni di testo e commenti vocali Le annotazioni di testo possono essere prese da un elenco predefinito o inserite tramite touch screen. Per i commenti vocali, è possibile collegare una cuffia. – Lenti intercambiabili Per poter utilizzare le termocamere ad infrarossi FLIR Serie E in qualsiasi situazione, sono disponibili la lente grandangolare e il teleobiettivo.
– WiFi Connessione a smartphone o tablet tramite Wi-Fi, con l’applicazione FLIR Tools mobile app (Apple iOS e Android) per la gestione e la condivisione dei risultati, oltre che per il controllo remoto.SKU: 237
-
GPIB INTERFACE MODULE
HP-Agilent/Keysight N2757A
AGILENT N2757A – GPIB INTERFACE MODULE N2757A is a GPIB interface module for fast data transfers. If you need fast data transfers, equip your 5462X oscilloscope with GPIB communication. Keysight offers the N2757A GPIB interface module to provide a GPIB port for your oscilloscope.
-
Power Supply
HP-Agilent/Keysight E3614A
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 48W, single output E3614A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. – Range 1: 0 to 8 V, 0 to 6 A. – Range 2: NA. – Power (max): 48 W. – Voltage rms: 200 µV. – Peak-to-Peak: 1 mV. – 0.01% + 2 mV. – Voltage: 10 mV. – Current: 10 mA. 48W, 8V, 6A
-
ELECTRICAL SAFETY ANALYZER
CHROMA 19032
I test di sicurezza elettrica sono un elemento importante nei test di qualità dei prodotti elettrici. Tutti i prodotti elettrici come adattatori, SMPS, cariche, elettrodomestici, prodotti informatici e prodotti video devono essere sottoposti a test di sicurezza elettrica.
La serie 19032 combina i test Hipot, Resistenza di isolamento (IR), Ground Bond (GB), Corrente di dispersione (LC) / LC LC / CC LC e Funzione dinamica. Il risparmio di spazio può arrivare fino al 50% dello spazio della linea di produzione, non acquistando più strumenti di test di sicurezza. Il 19032 è in grado di aumentare l’efficienza dei test di sicurezza elettrica durante la produzione e ridurre i costi di manodopera associati.
-
Power Supply
METAF MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply
The MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply is a equipment with high stability, high reliability, low noise, its output voltage or current can be continuously adjusted, and its constant voltage and current can auto-conversion. This low cost and universal power supply can be used in many different areas, from test of R&D equipment to test of production lines.
Features:
– Output off function
– Triple independent DC outputs. Two adjustable and one fixed output
– Independent, series and parallel variety output
– Constant voltage and constant current
– Low ripple and noise
– Four LED displays with 3 digits, selectable for two sets output voltage and current display simultaneously
– 16 hours continuous output with full load
– Auto tracking outputIndependent output:
CH1: 0-30V/0-05A
CH2: 0-30V/0-05A
CH3: 5V/1ASerial output:
CH1+CH2: 0-60V/0-5AParallel output:
CH1+CH2: 0-30V/0-10ASpecification:
Line Regulation: CV 1X10^-4+3mV CC 2X10^-3+3mA CH3 5mV
Load Regulation: CV 1X10^-4+4mV CC 2X10^-3+3mA CH3 15mV
Ripple & Noise: CV 1mVrms CC 3mA rms CH3 2mV
Display Accuracy: ±(0.5%Rdg+2digits)
Input Voltage: 110~127VAC±10%, 220~240VAC±10%
Dimensions (L x W x D): 250x135x460mm
Weight: 8,2 kg -
Module
HP-Agilent/Keysight N6731B
Keysight basic modules provide stable output, device protection, and accurate measurements. A single range allows programming voltages and currents from 0 V and 0 A to their maximum voltage and current rating. Use 2-wire local sense or 4-wire remote sense to improve regulation. All modules feature a quick disconnect connector.
Programmable output voltages: 0 to 150 V
Output power: 50 to 300 W
Voltage accuracy: 0.1% + 19 mV (5V output)
Ripple and noise 10 mV (5V output)
Up and down-programming with resistive load typically 20 msOvervoltage, overcurrent, and overtemperature protection
Basic modules are single wide allowing four per mainframe
Modules can operate at lower output power to stay within mainframe rating
Modules include a quick disconnect connector
Datasheet -
-
Power Supply
AGILENT-Hp/Keysight E3631A
Output Ratings
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 AProgramming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mARipple and Noise (20 Hz to 20 MHz)
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Readback Accuracy at 25°C ±5°C Voltage: 0.05% + 10 mV, 0.05% + 10 mV, 0.1% + 5 mV Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA Keysight basic DC power supplies offer essential features for a tight budget. The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package. Datasheet
-
HANDLED RECORDER
BK PRECISION DAS30
The DAS 30/50/60 high-speed multi-function data acquisition recorders feature versatile channel configurability, high-speed sampling (1 MSa/s), a wide input range (±5 mV to ±500 V), large internal solid-state memory of up to 64 GB, and 9.5 hours of battery life. Combined with the CAT III isolation rating, these multifunction data acquisition systems are well suited for a wide variety of applications including maintenance and electrical power analysis.
Each channel can record a different measurement type such as voltage, temperature (thermocouple or RTD), current or frequency simultaneously, using a common time base. The 10-inch touchscreen features unlimited data scrolling, zoom in/out function as well as drag and drop delta cursors for precision measurements.
-
Probe Offset Control and Power Module
HP-Agilent/Keysight 1143A
Keysight’s 1143A probe offset control and power module provides power and independent offset control for the Keysight 54700 Series probes. The probe’s offset is controllable via a nine-pin, D-subminiature connector on the rear panel. The ±50 V offset capability extends the dynamic range of the probe measurement system beyond that of many test and measurement instruments.
The Keysight 54701A active probe with the 1143A probe offset control and power module is versatile to use with any test and measurement equipment with a 50 ohm input.
programmable offset
±50 V offset
number of independently operated probes: 2
positive power output: +17.3 V ±150 mV
negative power output: -17.3 V ±150 mV
maximum current capability (both +17.3 V and -17.3 V supply): 300 mA
offset current: Variable from zero to ±5 mA
operating temperature: 0 to 55°C
operating humitity: 95% relative humidity at 40°C
net weight: 1.5 kg (3.4 lbs.)
shipping weight: 2.4 kg (5.4 lbs)
power requirements: 90 to 132 / 198 to 264 Vac, 47 to 440 Hz, 40 VA maximum
Dimensions: 211 mm (W) x 173 mm (D) x 78 mm (H) (8.3 x 6.8 x 3.1 inches) -
Oscilloscope 2 channels
Rigol DS6062
DSO with 600MHz bandwidth and 5GSa/s
The Rigol DS6062 is a very high quality two channel digital storage oscilloscope. It offers up to 5GSa/s real-time sample rate and up to 600MHz bandwidth. These high performances ensure not only to capture real-time instantaneous signal, but also to observe details of repeated signal. DS6062 have up to 120.000 wfms/s refresh rate, which enable users to capture instantaneous signal and abnormal signal more quickly, to enhance waveform capturing ability, and to expedite circuit debug course. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Other advantages: 10.1″ color LCD, bright and vivid waveform display- versatile trigger modes: i.e. slope, alternative, rise&fall edge, enable users to stabilize signal more easily. In economical oscilloscope field, DS6062 have no doubt the highest performances, the most functions thus should be engineers’ best choice. Delivery including 2 probes (bandwidth 600MHz), USB cable, pc software, power adapter and manual. General Data Digital Oscilloscope Digital Oscilloscope Rigol DS6062 Display 10,1″ WVGA-Color-LCD Resolution 800 x 480 Pixel Interface 2x USB-host for i.e. USB sticks USB-Device for a PC connection or USB Pict-Bridge printerinterface LAN for network connectivity (LXI compilant) GPIB (IEE-488, General Purpose Interface Bus) using the optional USB-GPIB Module Trigger- and Calibrationoutput 10MHz reference clock In-/Out VGA interface to connect to an external monitor or projector Size in clarification Weight in clarification Supported operation systems in clarification Oscilloscope Functions Oscilloscope Functions Digital Oscilloscope Rigol DS6062 Channels 2 Real-time sample rate 5 GSa/s realtime Bandwidth 600 MHz Sampling Modus Normal, average, peak detect Mathematics userdefined, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal Bus Decoding I²C, RS232, SPI, USB, CAN and FlexRay Signal Digital Oscilloscope Rigol DS6062 Input DC/AC coupling, up to 300 Vrms CAT I Real-time sample rate up to 5 GSa/s realtime Time base in clarification Memory 140Mpts (1 Channel) Filter Hardware LPF, HPF, BPF and BRF Vertical Digital Oscilloscope Rigol DS6062 Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) in clarification Displacement range in clarification Trigger Digital Oscilloscope Rigol DS6062 Trigger in clarification Signal system and line/field frequency (Video triggering mode) in clarification Triggerfunctions Edge, Pattern, Glitch, Puls width, Sequence, Slew rate, I²C, RS232/UART, CAN, FlexRay, USB, SPI, Video Measurement Digital Oscilloscope Rigol DS6062 Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Delay1-2 (rise), Delay1-2(fall) -
Termocamera
Flir E50
(Italiano) A seconda del modello di termocamera della FLIR Serie E, la capacità di risoluzione massima IR è di 320×240 pixels. Queste termocamere sono ideali per la manutenzione predittiva e le ispezioni programmate di impianti elettrici e sistemi meccanici, per assicurarne il corretto funzionamento con la massima efficienza e sicurezza e con il minimo consumo energetico.
– Risoluzione massima di 320 x 240 pixels A seconda del modello di termocamera FLIR Serie E, la risoluzione delle immagini IR va da 160×120 pixels a 320×240 pixels.
– Piccole ed ultraleggere I modelli FLIR Serie E pesano solo 825gr e possono essere facilmente trasportati all’interno del loro fodero.
– Estremamente robusta Le termocamere FLIR Serie E sopportano cadute da due metri. Sono a norma IP54.
– Fotocamera di alta qualità Le termocamere FLIR Serie E sono dotate di fotocamera digitale integrata che rende le ispezioni più semplici e veloci.
– Galleria immagini Permette di accedere facilmente alle immagini salvate e selezionare quella desiderata. – Precisione ± 2% Accuratezza ±2 °C o ±2% della lettura.
– LCD touch screen Ampio LCD touch screen a colori da 3,5″.
– Illuminatore a LED incorporato Le termocamere FLIR Serie E sono dotate di illuminatore a LED incorporato che assicura un’alta qualità delle immagini nel visibile, indipendentemente dalla luminosità dell’ambiente di lavoro. – Batteria a lunga durata La batteria al litio ha un’autonomia di 4 ore, è facilmente sostituibile sul posto e vi permetterà di mantenere gli impegni programmati. – Puntatore laser Un pulsante ergonomico attiva il puntatore laser che consente di associare il punto caldo/freddo nell’immagine IR con la posizione fisica dell’oggetto reale nel campo.
– FLIR Picture-in-Picture Utilizzando la funzione FLIR Picture-in-Picture, è estremamente semplice localizzare ed evidenziare le aree di interesse.
– FLIR Thermal Fusion Fonde le immagini visive e quelle ad infrarossi per consentire un’analisi migliore.
– Report immediati Creazione immediata di report direttamente nella termocamera, facilmente copiabili su USB. (FLIR E60)
– Annotazioni di testo e commenti vocali Le annotazioni di testo possono essere prese da un elenco predefinito o inserite tramite touch screen. Per i commenti vocali, è possibile collegare una cuffia. – Lenti intercambiabili Per poter utilizzare le termocamere ad infrarossi FLIR Serie E in qualsiasi situazione, sono disponibili la lente grandangolare e il teleobiettivo.
– WiFi Connessione a smartphone o tablet tramite Wi-Fi, con l’applicazione FLIR Tools mobile app (Apple iOS e Android) per la gestione e la condivisione dei risultati, oltre che per il controllo remoto.
-
GPIB INTERFACE MODULE
HP-Agilent/Keysight N2757A
AGILENT N2757A – GPIB INTERFACE MODULE N2757A is a GPIB interface module for fast data transfers. If you need fast data transfers, equip your 5462X oscilloscope with GPIB communication. Keysight offers the N2757A GPIB interface module to provide a GPIB port for your oscilloscope.
-
Power Supply
HP-Agilent/Keysight E3614A
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use- low-noise and excellent regulation- and dual-range outputs (E3610A/11A/12A). The Agilent 48W, single output E3614A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities. – Range 1: 0 to 8 V, 0 to 6 A. – Range 2: NA. – Power (max): 48 W. – Voltage rms: 200 µV. – Peak-to-Peak: 1 mV. – 0.01% + 2 mV. – Voltage: 10 mV. – Current: 10 mA. 48W, 8V, 6A
-
ELECTRICAL SAFETY ANALYZER
CHROMA 19032
I test di sicurezza elettrica sono un elemento importante nei test di qualità dei prodotti elettrici. Tutti i prodotti elettrici come adattatori, SMPS, cariche, elettrodomestici, prodotti informatici e prodotti video devono essere sottoposti a test di sicurezza elettrica.
La serie 19032 combina i test Hipot, Resistenza di isolamento (IR), Ground Bond (GB), Corrente di dispersione (LC) / LC LC / CC LC e Funzione dinamica. Il risparmio di spazio può arrivare fino al 50% dello spazio della linea di produzione, non acquistando più strumenti di test di sicurezza. Il 19032 è in grado di aumentare l’efficienza dei test di sicurezza elettrica durante la produzione e ridurre i costi di manodopera associati.
-
Power Supply
METAF MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply
The MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply is a equipment with high stability, high reliability, low noise, its output voltage or current can be continuously adjusted, and its constant voltage and current can auto-conversion. This low cost and universal power supply can be used in many different areas, from test of R&D equipment to test of production lines.
Features:
– Output off function
– Triple independent DC outputs. Two adjustable and one fixed output
– Independent, series and parallel variety output
– Constant voltage and constant current
– Low ripple and noise
– Four LED displays with 3 digits, selectable for two sets output voltage and current display simultaneously
– 16 hours continuous output with full load
– Auto tracking outputIndependent output:
CH1: 0-30V/0-05A
CH2: 0-30V/0-05A
CH3: 5V/1ASerial output:
CH1+CH2: 0-60V/0-5AParallel output:
CH1+CH2: 0-30V/0-10ASpecification:
Line Regulation: CV 1X10^-4+3mV CC 2X10^-3+3mA CH3 5mV
Load Regulation: CV 1X10^-4+4mV CC 2X10^-3+3mA CH3 15mV
Ripple & Noise: CV 1mVrms CC 3mA rms CH3 2mV
Display Accuracy: ±(0.5%Rdg+2digits)
Input Voltage: 110~127VAC±10%, 220~240VAC±10%
Dimensions (L x W x D): 250x135x460mm
Weight: 8,2 kg -
Module
HP-Agilent/Keysight N6731B
Keysight basic modules provide stable output, device protection, and accurate measurements. A single range allows programming voltages and currents from 0 V and 0 A to their maximum voltage and current rating. Use 2-wire local sense or 4-wire remote sense to improve regulation. All modules feature a quick disconnect connector.
Programmable output voltages: 0 to 150 V
Output power: 50 to 300 W
Voltage accuracy: 0.1% + 19 mV (5V output)
Ripple and noise 10 mV (5V output)
Up and down-programming with resistive load typically 20 msOvervoltage, overcurrent, and overtemperature protection
Basic modules are single wide allowing four per mainframe
Modules can operate at lower output power to stay within mainframe rating
Modules include a quick disconnect connector
Datasheet -
-
Power Supply
AGILENT-Hp/Keysight E3631A
Output Ratings
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 AProgramming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mARipple and Noise (20 Hz to 20 MHz)
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Readback Accuracy at 25°C ±5°C Voltage: 0.05% + 10 mV, 0.05% + 10 mV, 0.1% + 5 mV Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA Keysight basic DC power supplies offer essential features for a tight budget. The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package. Datasheet
-
HANDLED RECORDER
BK PRECISION DAS30
The DAS 30/50/60 high-speed multi-function data acquisition recorders feature versatile channel configurability, high-speed sampling (1 MSa/s), a wide input range (±5 mV to ±500 V), large internal solid-state memory of up to 64 GB, and 9.5 hours of battery life. Combined with the CAT III isolation rating, these multifunction data acquisition systems are well suited for a wide variety of applications including maintenance and electrical power analysis.
Each channel can record a different measurement type such as voltage, temperature (thermocouple or RTD), current or frequency simultaneously, using a common time base. The 10-inch touchscreen features unlimited data scrolling, zoom in/out function as well as drag and drop delta cursors for precision measurements.
-
Probe Offset Control and Power Module
HP-Agilent/Keysight 1143A
Keysight’s 1143A probe offset control and power module provides power and independent offset control for the Keysight 54700 Series probes. The probe’s offset is controllable via a nine-pin, D-subminiature connector on the rear panel. The ±50 V offset capability extends the dynamic range of the probe measurement system beyond that of many test and measurement instruments.
The Keysight 54701A active probe with the 1143A probe offset control and power module is versatile to use with any test and measurement equipment with a 50 ohm input.
programmable offset
±50 V offset
number of independently operated probes: 2
positive power output: +17.3 V ±150 mV
negative power output: -17.3 V ±150 mV
maximum current capability (both +17.3 V and -17.3 V supply): 300 mA
offset current: Variable from zero to ±5 mA
operating temperature: 0 to 55°C
operating humitity: 95% relative humidity at 40°C
net weight: 1.5 kg (3.4 lbs.)
shipping weight: 2.4 kg (5.4 lbs)
power requirements: 90 to 132 / 198 to 264 Vac, 47 to 440 Hz, 40 VA maximum
Dimensions: 211 mm (W) x 173 mm (D) x 78 mm (H) (8.3 x 6.8 x 3.1 inches) -
Oscilloscope 2 channels
Rigol DS6062
DSO with 600MHz bandwidth and 5GSa/s
The Rigol DS6062 is a very high quality two channel digital storage oscilloscope. It offers up to 5GSa/s real-time sample rate and up to 600MHz bandwidth. These high performances ensure not only to capture real-time instantaneous signal, but also to observe details of repeated signal. DS6062 have up to 120.000 wfms/s refresh rate, which enable users to capture instantaneous signal and abnormal signal more quickly, to enhance waveform capturing ability, and to expedite circuit debug course. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Other advantages: 10.1″ color LCD, bright and vivid waveform display- versatile trigger modes: i.e. slope, alternative, rise&fall edge, enable users to stabilize signal more easily. In economical oscilloscope field, DS6062 have no doubt the highest performances, the most functions thus should be engineers’ best choice. Delivery including 2 probes (bandwidth 600MHz), USB cable, pc software, power adapter and manual. General Data Digital Oscilloscope Digital Oscilloscope Rigol DS6062 Display 10,1″ WVGA-Color-LCD Resolution 800 x 480 Pixel Interface 2x USB-host for i.e. USB sticks USB-Device for a PC connection or USB Pict-Bridge printerinterface LAN for network connectivity (LXI compilant) GPIB (IEE-488, General Purpose Interface Bus) using the optional USB-GPIB Module Trigger- and Calibrationoutput 10MHz reference clock In-/Out VGA interface to connect to an external monitor or projector Size in clarification Weight in clarification Supported operation systems in clarification Oscilloscope Functions Oscilloscope Functions Digital Oscilloscope Rigol DS6062 Channels 2 Real-time sample rate 5 GSa/s realtime Bandwidth 600 MHz Sampling Modus Normal, average, peak detect Mathematics userdefined, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal Bus Decoding I²C, RS232, SPI, USB, CAN and FlexRay Signal Digital Oscilloscope Rigol DS6062 Input DC/AC coupling, up to 300 Vrms CAT I Real-time sample rate up to 5 GSa/s realtime Time base in clarification Memory 140Mpts (1 Channel) Filter Hardware LPF, HPF, BPF and BRF Vertical Digital Oscilloscope Rigol DS6062 Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) in clarification Displacement range in clarification Trigger Digital Oscilloscope Rigol DS6062 Trigger in clarification Signal system and line/field frequency (Video triggering mode) in clarification Triggerfunctions Edge, Pattern, Glitch, Puls width, Sequence, Slew rate, I²C, RS232/UART, CAN, FlexRay, USB, SPI, Video Measurement Digital Oscilloscope Rigol DS6062 Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Delay1-2 (rise), Delay1-2(fall) -
Termocamera
Flir E50
(Italiano) A seconda del modello di termocamera della FLIR Serie E, la capacità di risoluzione massima IR è di 320×240 pixels. Queste termocamere sono ideali per la manutenzione predittiva e le ispezioni programmate di impianti elettrici e sistemi meccanici, per assicurarne il corretto funzionamento con la massima efficienza e sicurezza e con il minimo consumo energetico.
– Risoluzione massima di 320 x 240 pixels A seconda del modello di termocamera FLIR Serie E, la risoluzione delle immagini IR va da 160×120 pixels a 320×240 pixels.
– Piccole ed ultraleggere I modelli FLIR Serie E pesano solo 825gr e possono essere facilmente trasportati all’interno del loro fodero.
– Estremamente robusta Le termocamere FLIR Serie E sopportano cadute da due metri. Sono a norma IP54.
– Fotocamera di alta qualità Le termocamere FLIR Serie E sono dotate di fotocamera digitale integrata che rende le ispezioni più semplici e veloci.
– Galleria immagini Permette di accedere facilmente alle immagini salvate e selezionare quella desiderata. – Precisione ± 2% Accuratezza ±2 °C o ±2% della lettura.
– LCD touch screen Ampio LCD touch screen a colori da 3,5″.
– Illuminatore a LED incorporato Le termocamere FLIR Serie E sono dotate di illuminatore a LED incorporato che assicura un’alta qualità delle immagini nel visibile, indipendentemente dalla luminosità dell’ambiente di lavoro. – Batteria a lunga durata La batteria al litio ha un’autonomia di 4 ore, è facilmente sostituibile sul posto e vi permetterà di mantenere gli impegni programmati. – Puntatore laser Un pulsante ergonomico attiva il puntatore laser che consente di associare il punto caldo/freddo nell’immagine IR con la posizione fisica dell’oggetto reale nel campo.
– FLIR Picture-in-Picture Utilizzando la funzione FLIR Picture-in-Picture, è estremamente semplice localizzare ed evidenziare le aree di interesse.
– FLIR Thermal Fusion Fonde le immagini visive e quelle ad infrarossi per consentire un’analisi migliore.
– Report immediati Creazione immediata di report direttamente nella termocamera, facilmente copiabili su USB. (FLIR E60)
– Annotazioni di testo e commenti vocali Le annotazioni di testo possono essere prese da un elenco predefinito o inserite tramite touch screen. Per i commenti vocali, è possibile collegare una cuffia. – Lenti intercambiabili Per poter utilizzare le termocamere ad infrarossi FLIR Serie E in qualsiasi situazione, sono disponibili la lente grandangolare e il teleobiettivo.
– WiFi Connessione a smartphone o tablet tramite Wi-Fi, con l’applicazione FLIR Tools mobile app (Apple iOS e Android) per la gestione e la condivisione dei risultati, oltre che per il controllo remoto.