ItalianoHP-Agilent/Keysight
Showing 1–30 of 455 results
-
Noise Figure Meter
HP-Agilent/Keysight 8970B
Il misuratore di rumore Keysight 8970B elimina il mistero dalle misurazioni di figure di disturbo, rendendole facili, precise e ripetibili.
L' HP 8970B può essere utilizzato con le fonti di rumore della famiglia 346 o 347.
La bassa incertezza dello strumento e la correzione automatica del secondo stadio consentono di effettuare letture accurate della cifra di rumore, anche per dispositivi a basso guadagno. Lo strumento dispone di speciali modalità di misurazione per la misurazione del mixer ed è in grado di controllare gli oscillatori locali esterni e il set di test della cifra di rumore 8971C.SKU: 152€900.00 View Product -
Electronic Load Module, Lightwave Switch
HP-Agilent/Keysight 86060B
These electronic loads are particularly suited for the lab bench. Entering commands manually using the front panel keypad is simpler because the channel does not need to be specified, as in a mainframe configuration. Extensive protection is included to help protect your valuable prototypes under test. This includes overvoltage, over current, over temperature, overpower, and reverse polarity.
The Keysight 6060B is a 300 W, single output electronic load, ideal for evaluation of DC power sources and power components in bench applications. The 6060B has built-in measurement functions that make it convenient for testing single output applications in areas such as research and development, production, and incoming inspection.
The Keysight 6060B loads are suitable for manufacturing test systems where maximizing speed is not critical. They use industry standard SCPI instructions, and also have VXI Plug & Play drivers to simplify system design. For the greatest speed and accuracy in programming and measurement, see the DC Electronic Loads.
SKU: 399€650.00 View Product -
Power Supply
HP-Agilent/Keysight 6623A
Agilent high performance DC power supplies offer spec and accuracy for test optimization. The multiple output, 40W – 10 W GPIB 6621A – 6624A and 6627A provide dual-range outputs- fast, low-noise outputs- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. The Agilent 80W, triple-output 6623A is a versatile solution to help improve system accuracy and reduce test time in a 3U high package. Output Ratings – Low-range volts, amps: 0 to 7 V, 0 to 5 A- 0 to 20 V, 0 to 2 A- 0 to 7 V, 0 to 10 A – High range volts, amps: 0 to 20 V, 0 to 2 A- 0 to 50 V, 0 to 0.8 A- 0 to 20 V, 0 to 4 A Programming Accuracy at 25°C ±5°C – Voltage: 0.06% + 19 mV, 50 mV, 19 mV – Current: 0.16% + 50 mA, 20 mA, 100mA Ripple & Noise (20 Hz to 20 MHz) – Voltage rms: 500 µV – Peak-to-peak: 3 mV – Current rms: 1 mA
DatasheetSKU: 319€450.00 View Product -
Power Meter
HP-Agilent/Keysight 435B
The HP 435B power meter is an analog power meter, compatible with the entire series of 8480 power sensors. Depending on which sensor is used, the 435B can measure power from -65 dBm to +44 dBm, full scale, at frequencies from 100 kHz to 110 GHz. This versatile instrument also features <1 percent instrumentation uncertainty, low noise and drift, auto-zero, recorder output, optional battery operation, and long cable options up to 61 m (200 ft). * Optional battery for fully portable operation * Accurate internal calibration source for long-term accuracy * Nine interchangeable sensors for a wide range of applications * Frequency Range: 100 kHz to 110 GHz * Power Range: -65 to +44 dBm * Instrumentation Accuracy: ±1% * Power Reference Output: 50 MHz/1MW
SKU: 23€85.00 View Product -
Attenuator
HP 11708A 30 dB Attenuator Pad, 50 MHz
The HP 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
* Frequency Range: 50 MHz
* Attenuation: 30 dB ± 0.05 dB
* 50 ohm impedance
* SWR: <1.05 at 50 MHzSKU: n/a -
Scalar Network Analyzer
HP-Agilent/Keysight 8757A
Measure insertion loss or gain, return loss, SWR, power quickly and accurately with the new HP 8757A Scalar Network Analyzer. With high perforamance detectors and directional bridges and a companion HP source and digital plotter, the HP 8757A becomes the basis of a complete measurement system with superb performance.
-76 dB dynamic range
– Accurate swept power measurement (dBm)
– 40 dB directivity bridges
-Four independant display channels
-Limit testing built in
– Save/recall setup and cal data
-Direct plotter output
DatasheetSKU: n/a -
Microwave Network Analyzer
HP-Agilent/Keysight 85107B , 8510C , 85102B , 85101C , 8517B
HP 85107B 230 MICROWAVE NETWORK ANALYZER, 45 MHz to 50 GHz.
Complete with:
HP 8510C NETWORK ANALYZER
HP 85102B IF / DETECTOR
HP 8517B S-PARAMETER TEST SET 45 MHz-50GHz OPT 007
HP 85133-60016 2.4mm (f) FLEXIBLE TEST PORT CABLE Qty.2
HP 83651B SYNTHESIZED SWEEPER 10MHz – 50GHz 8360B Qty.1
ACCESSORIES:
Qty.1 INTELLIGENT INTERFACES MICROPRINT45CH VARIABLE RESOLUTION HP-GL / COLOR / SPEED MODES HP-IP TO PARALLEL INTERFACE CONVERTER;
Qty.1x WG K420 GPIB CABLE;
Qty.2x HP 10833A GPIB CABLE;
Qty.1x HP 08510-60101 IF INTERCONNECT DISPLAY;
Qty.1x HP 08510-60102 TEST SET – IF INTERCONNECT;
Qty.2x HP 10503A BNC CABLE;
Qty.1x HP 8710-1764 8lb-in;
Qty.1x HP 8710-1770 9/16 – 1/2;
Qty.1x HUBER & SUHNER SUCOFLEX 104P FLEXIBLE MICROWAVE CABLE ASSEMBLY;
Qty.5x ADAPTER.
DatasheetSKU: n/a -
Power Supply
HP/AGILENT/KEYSIGHT E3615A
HP basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A). The HP 60W, single output E3615A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.
The E3600 Series of low-cost benchtop power supplies give you the performance of system power supplies at a decent price. All E3600 family members provide clean power with excellent regulation and a fast transient response. The E3600 Series single-output non-programmable models are described on this page. Refer to page 3 for information on dual-output and triple-output non- programmable models.
All E3600 Series single-output non-programmable power supplies feature separate digital-panel meters for monitoring voltage and current simultaneously, giving you precise reading and control capability. All models also feature 10-turn potentiometers for accurate adjustment of voltage and current output settings.
With 0.01 percent load and line regulation, these instruments keep the output steady when power line and load changes occur.
The low normal mode noise specification of less than 200 μVrms ensures clean power for precision circuitry.In all single-output models, either the positive or negative terminal can be connected to ground, providing a positive or negative voltage output. Outputs can also be floated up to 240 V from ground.
These instruments also feature adjustable current limits, letting you set the safest current limit without having to short the output.
These popular 30-watt bench supplies are designed for general laboratory use. The constant-voltage, constant-current output allows operation as either a voltage or current source. The changeover occurs automatically, based on the load. Each of these models has two ranges, allowing more current at a lower voltage. For higher output voltages, supplies can be connected in series. These models also feature overload protection. A continuously acting constant current curcuit protects the power supply against all overloads including a direct short placed across the terminals in a constant voltage operation.
These fexible 60-watt, single-range power supplies can be used as either voltage or current sources. When the output terminal voltage increases to a preset shut-down level, an overvoltage protection circuit disables the output to protect the device under test (DUT) for damage. The overvoltage protection feature can be easily monitored and adjusted from the front panel.
Using the remote sensing capability, these instruments automatically compensate for voltage drop in the load leads, so you obtain an accurate voltage at the DUT.
Using the remote analog voltage programming capability, these instruments can remotely vary the voltage, so you are able to control the regulation output voltage or current.
Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
- Range 1: 0 to 20 V, 0 to 3 A
- Range 2: NA
- Power (max): 60 W
Ripple & Noise from 20 Hz to 20 MHz
- Voltage rms: 200 µV
- Peak-to-Peak: 1 mV
Load & Line Regulation
- 0.01% + 2 mV
Meter Resolution
- Voltage: 10 mV (0-20 V), 100 mV (>20 V)
- Current: 10 mA
SKU: n/a -
Date Acquisition/Switch Unit
KEYSIGHT – Agilent/Hp 34972A
3-slot mainframe with USB and LAN
6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
8 switch and control plug-in modules to choose from
Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
50k readings of non-volatile memory holds data when power is removed
Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequencesThe Keysight 34970A data acquisition / data logger switch unit consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
DatasheetSKU: n/a -
Power Supply
HP-Agilent/Keysight 6654A
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 500W GPIB 665x series provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Keysight 540W, single output 6654A is a fast and flexible power supply or automated testing, and is designed to increase test throughput with fast up- and downprogramm.
Output Ratings
Output voltage: 0 to 80 V
Output current (40°C): 0 to 6 A
Maximum current (50°C/55°C): 8.1 A/7.7 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 8 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 500 µV
Peak-to-Peak: 5 mV
Current rms: 3 mA
DatasheetSKU: 1168
-
Noise Figure Meter
HP-Agilent/Keysight 8970B
Il misuratore di rumore Keysight 8970B elimina il mistero dalle misurazioni di figure di disturbo, rendendole facili, precise e ripetibili.
L' HP 8970B può essere utilizzato con le fonti di rumore della famiglia 346 o 347.
La bassa incertezza dello strumento e la correzione automatica del secondo stadio consentono di effettuare letture accurate della cifra di rumore, anche per dispositivi a basso guadagno. Lo strumento dispone di speciali modalità di misurazione per la misurazione del mixer ed è in grado di controllare gli oscillatori locali esterni e il set di test della cifra di rumore 8971C. -
Electronic Load Module, Lightwave Switch
HP-Agilent/Keysight 86060B
These electronic loads are particularly suited for the lab bench. Entering commands manually using the front panel keypad is simpler because the channel does not need to be specified, as in a mainframe configuration. Extensive protection is included to help protect your valuable prototypes under test. This includes overvoltage, over current, over temperature, overpower, and reverse polarity.
The Keysight 6060B is a 300 W, single output electronic load, ideal for evaluation of DC power sources and power components in bench applications. The 6060B has built-in measurement functions that make it convenient for testing single output applications in areas such as research and development, production, and incoming inspection.
The Keysight 6060B loads are suitable for manufacturing test systems where maximizing speed is not critical. They use industry standard SCPI instructions, and also have VXI Plug & Play drivers to simplify system design. For the greatest speed and accuracy in programming and measurement, see the DC Electronic Loads.
-
Power Supply
HP-Agilent/Keysight 6623A
Agilent high performance DC power supplies offer spec and accuracy for test optimization. The multiple output, 40W – 10 W GPIB 6621A – 6624A and 6627A provide dual-range outputs- fast, low-noise outputs- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. The Agilent 80W, triple-output 6623A is a versatile solution to help improve system accuracy and reduce test time in a 3U high package. Output Ratings – Low-range volts, amps: 0 to 7 V, 0 to 5 A- 0 to 20 V, 0 to 2 A- 0 to 7 V, 0 to 10 A – High range volts, amps: 0 to 20 V, 0 to 2 A- 0 to 50 V, 0 to 0.8 A- 0 to 20 V, 0 to 4 A Programming Accuracy at 25°C ±5°C – Voltage: 0.06% + 19 mV, 50 mV, 19 mV – Current: 0.16% + 50 mA, 20 mA, 100mA Ripple & Noise (20 Hz to 20 MHz) – Voltage rms: 500 µV – Peak-to-peak: 3 mV – Current rms: 1 mA
Datasheet -
Power Meter
HP-Agilent/Keysight 435B
The HP 435B power meter is an analog power meter, compatible with the entire series of 8480 power sensors. Depending on which sensor is used, the 435B can measure power from -65 dBm to +44 dBm, full scale, at frequencies from 100 kHz to 110 GHz. This versatile instrument also features <1 percent instrumentation uncertainty, low noise and drift, auto-zero, recorder output, optional battery operation, and long cable options up to 61 m (200 ft). * Optional battery for fully portable operation * Accurate internal calibration source for long-term accuracy * Nine interchangeable sensors for a wide range of applications * Frequency Range: 100 kHz to 110 GHz * Power Range: -65 to +44 dBm * Instrumentation Accuracy: ±1% * Power Reference Output: 50 MHz/1MW
-
Attenuator
HP 11708A 30 dB Attenuator Pad, 50 MHz
The HP 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
* Frequency Range: 50 MHz
* Attenuation: 30 dB ± 0.05 dB
* 50 ohm impedance
* SWR: <1.05 at 50 MHz -
Scalar Network Analyzer
HP-Agilent/Keysight 8757A
Measure insertion loss or gain, return loss, SWR, power quickly and accurately with the new HP 8757A Scalar Network Analyzer. With high perforamance detectors and directional bridges and a companion HP source and digital plotter, the HP 8757A becomes the basis of a complete measurement system with superb performance.
-76 dB dynamic range
– Accurate swept power measurement (dBm)
– 40 dB directivity bridges
-Four independant display channels
-Limit testing built in
– Save/recall setup and cal data
-Direct plotter output
Datasheet -
Microwave Network Analyzer
HP-Agilent/Keysight 85107B , 8510C , 85102B , 85101C , 8517B
HP 85107B 230 MICROWAVE NETWORK ANALYZER, 45 MHz to 50 GHz.
Complete with:
HP 8510C NETWORK ANALYZER
HP 85102B IF / DETECTOR
HP 8517B S-PARAMETER TEST SET 45 MHz-50GHz OPT 007
HP 85133-60016 2.4mm (f) FLEXIBLE TEST PORT CABLE Qty.2
HP 83651B SYNTHESIZED SWEEPER 10MHz – 50GHz 8360B Qty.1
ACCESSORIES:
Qty.1 INTELLIGENT INTERFACES MICROPRINT45CH VARIABLE RESOLUTION HP-GL / COLOR / SPEED MODES HP-IP TO PARALLEL INTERFACE CONVERTER;
Qty.1x WG K420 GPIB CABLE;
Qty.2x HP 10833A GPIB CABLE;
Qty.1x HP 08510-60101 IF INTERCONNECT DISPLAY;
Qty.1x HP 08510-60102 TEST SET – IF INTERCONNECT;
Qty.2x HP 10503A BNC CABLE;
Qty.1x HP 8710-1764 8lb-in;
Qty.1x HP 8710-1770 9/16 – 1/2;
Qty.1x HUBER & SUHNER SUCOFLEX 104P FLEXIBLE MICROWAVE CABLE ASSEMBLY;
Qty.5x ADAPTER.
Datasheet -
Power Supply
HP/AGILENT/KEYSIGHT E3615A
HP basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A). The HP 60W, single output E3615A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.
The E3600 Series of low-cost benchtop power supplies give you the performance of system power supplies at a decent price. All E3600 family members provide clean power with excellent regulation and a fast transient response. The E3600 Series single-output non-programmable models are described on this page. Refer to page 3 for information on dual-output and triple-output non- programmable models.
All E3600 Series single-output non-programmable power supplies feature separate digital-panel meters for monitoring voltage and current simultaneously, giving you precise reading and control capability. All models also feature 10-turn potentiometers for accurate adjustment of voltage and current output settings.
With 0.01 percent load and line regulation, these instruments keep the output steady when power line and load changes occur.
The low normal mode noise specification of less than 200 μVrms ensures clean power for precision circuitry.In all single-output models, either the positive or negative terminal can be connected to ground, providing a positive or negative voltage output. Outputs can also be floated up to 240 V from ground.
These instruments also feature adjustable current limits, letting you set the safest current limit without having to short the output.
These popular 30-watt bench supplies are designed for general laboratory use. The constant-voltage, constant-current output allows operation as either a voltage or current source. The changeover occurs automatically, based on the load. Each of these models has two ranges, allowing more current at a lower voltage. For higher output voltages, supplies can be connected in series. These models also feature overload protection. A continuously acting constant current curcuit protects the power supply against all overloads including a direct short placed across the terminals in a constant voltage operation.
These fexible 60-watt, single-range power supplies can be used as either voltage or current sources. When the output terminal voltage increases to a preset shut-down level, an overvoltage protection circuit disables the output to protect the device under test (DUT) for damage. The overvoltage protection feature can be easily monitored and adjusted from the front panel.
Using the remote sensing capability, these instruments automatically compensate for voltage drop in the load leads, so you obtain an accurate voltage at the DUT.
Using the remote analog voltage programming capability, these instruments can remotely vary the voltage, so you are able to control the regulation output voltage or current.
Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
- Range 1: 0 to 20 V, 0 to 3 A
- Range 2: NA
- Power (max): 60 W
Ripple & Noise from 20 Hz to 20 MHz
- Voltage rms: 200 µV
- Peak-to-Peak: 1 mV
Load & Line Regulation
- 0.01% + 2 mV
Meter Resolution
- Voltage: 10 mV (0-20 V), 100 mV (>20 V)
- Current: 10 mA
-
Date Acquisition/Switch Unit
KEYSIGHT – Agilent/Hp 34972A
3-slot mainframe with USB and LAN
6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
8 switch and control plug-in modules to choose from
Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
50k readings of non-volatile memory holds data when power is removed
Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequencesThe Keysight 34970A data acquisition / data logger switch unit consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
Datasheet -
Power Supply
HP-Agilent/Keysight 6654A
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 500W GPIB 665x series provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Keysight 540W, single output 6654A is a fast and flexible power supply or automated testing, and is designed to increase test throughput with fast up- and downprogramm.
Output Ratings
Output voltage: 0 to 80 V
Output current (40°C): 0 to 6 A
Maximum current (50°C/55°C): 8.1 A/7.7 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 8 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 500 µV
Peak-to-Peak: 5 mV
Current rms: 3 mA
Datasheet
-
Noise Figure Meter
HP-Agilent/Keysight 8970B
Il misuratore di rumore Keysight 8970B elimina il mistero dalle misurazioni di figure di disturbo, rendendole facili, precise e ripetibili.
L' HP 8970B può essere utilizzato con le fonti di rumore della famiglia 346 o 347.
La bassa incertezza dello strumento e la correzione automatica del secondo stadio consentono di effettuare letture accurate della cifra di rumore, anche per dispositivi a basso guadagno. Lo strumento dispone di speciali modalità di misurazione per la misurazione del mixer ed è in grado di controllare gli oscillatori locali esterni e il set di test della cifra di rumore 8971C.€900.00 View Product -
Electronic Load Module, Lightwave Switch
HP-Agilent/Keysight 86060B
These electronic loads are particularly suited for the lab bench. Entering commands manually using the front panel keypad is simpler because the channel does not need to be specified, as in a mainframe configuration. Extensive protection is included to help protect your valuable prototypes under test. This includes overvoltage, over current, over temperature, overpower, and reverse polarity.
The Keysight 6060B is a 300 W, single output electronic load, ideal for evaluation of DC power sources and power components in bench applications. The 6060B has built-in measurement functions that make it convenient for testing single output applications in areas such as research and development, production, and incoming inspection.
The Keysight 6060B loads are suitable for manufacturing test systems where maximizing speed is not critical. They use industry standard SCPI instructions, and also have VXI Plug & Play drivers to simplify system design. For the greatest speed and accuracy in programming and measurement, see the DC Electronic Loads.
€650.00 View Product -
Power Supply
HP-Agilent/Keysight 6623A
Agilent high performance DC power supplies offer spec and accuracy for test optimization. The multiple output, 40W – 10 W GPIB 6621A – 6624A and 6627A provide dual-range outputs- fast, low-noise outputs- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. The Agilent 80W, triple-output 6623A is a versatile solution to help improve system accuracy and reduce test time in a 3U high package. Output Ratings – Low-range volts, amps: 0 to 7 V, 0 to 5 A- 0 to 20 V, 0 to 2 A- 0 to 7 V, 0 to 10 A – High range volts, amps: 0 to 20 V, 0 to 2 A- 0 to 50 V, 0 to 0.8 A- 0 to 20 V, 0 to 4 A Programming Accuracy at 25°C ±5°C – Voltage: 0.06% + 19 mV, 50 mV, 19 mV – Current: 0.16% + 50 mA, 20 mA, 100mA Ripple & Noise (20 Hz to 20 MHz) – Voltage rms: 500 µV – Peak-to-peak: 3 mV – Current rms: 1 mA
Datasheet€450.00 View Product -
Power Meter
HP-Agilent/Keysight 435B
The HP 435B power meter is an analog power meter, compatible with the entire series of 8480 power sensors. Depending on which sensor is used, the 435B can measure power from -65 dBm to +44 dBm, full scale, at frequencies from 100 kHz to 110 GHz. This versatile instrument also features <1 percent instrumentation uncertainty, low noise and drift, auto-zero, recorder output, optional battery operation, and long cable options up to 61 m (200 ft). * Optional battery for fully portable operation * Accurate internal calibration source for long-term accuracy * Nine interchangeable sensors for a wide range of applications * Frequency Range: 100 kHz to 110 GHz * Power Range: -65 to +44 dBm * Instrumentation Accuracy: ±1% * Power Reference Output: 50 MHz/1MW
€85.00 View Product -
Attenuator
HP 11708A 30 dB Attenuator Pad, 50 MHz
The HP 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
* Frequency Range: 50 MHz
* Attenuation: 30 dB ± 0.05 dB
* 50 ohm impedance
* SWR: <1.05 at 50 MHz -
Scalar Network Analyzer
HP-Agilent/Keysight 8757A
Measure insertion loss or gain, return loss, SWR, power quickly and accurately with the new HP 8757A Scalar Network Analyzer. With high perforamance detectors and directional bridges and a companion HP source and digital plotter, the HP 8757A becomes the basis of a complete measurement system with superb performance.
-76 dB dynamic range
– Accurate swept power measurement (dBm)
– 40 dB directivity bridges
-Four independant display channels
-Limit testing built in
– Save/recall setup and cal data
-Direct plotter output
Datasheet -
Microwave Network Analyzer
HP-Agilent/Keysight 85107B , 8510C , 85102B , 85101C , 8517B
HP 85107B 230 MICROWAVE NETWORK ANALYZER, 45 MHz to 50 GHz.
Complete with:
HP 8510C NETWORK ANALYZER
HP 85102B IF / DETECTOR
HP 8517B S-PARAMETER TEST SET 45 MHz-50GHz OPT 007
HP 85133-60016 2.4mm (f) FLEXIBLE TEST PORT CABLE Qty.2
HP 83651B SYNTHESIZED SWEEPER 10MHz – 50GHz 8360B Qty.1
ACCESSORIES:
Qty.1 INTELLIGENT INTERFACES MICROPRINT45CH VARIABLE RESOLUTION HP-GL / COLOR / SPEED MODES HP-IP TO PARALLEL INTERFACE CONVERTER;
Qty.1x WG K420 GPIB CABLE;
Qty.2x HP 10833A GPIB CABLE;
Qty.1x HP 08510-60101 IF INTERCONNECT DISPLAY;
Qty.1x HP 08510-60102 TEST SET – IF INTERCONNECT;
Qty.2x HP 10503A BNC CABLE;
Qty.1x HP 8710-1764 8lb-in;
Qty.1x HP 8710-1770 9/16 – 1/2;
Qty.1x HUBER & SUHNER SUCOFLEX 104P FLEXIBLE MICROWAVE CABLE ASSEMBLY;
Qty.5x ADAPTER.
Datasheet -
Power Supply
HP/AGILENT/KEYSIGHT E3615A
HP basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A). The HP 60W, single output E3615A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.
The E3600 Series of low-cost benchtop power supplies give you the performance of system power supplies at a decent price. All E3600 family members provide clean power with excellent regulation and a fast transient response. The E3600 Series single-output non-programmable models are described on this page. Refer to page 3 for information on dual-output and triple-output non- programmable models.
All E3600 Series single-output non-programmable power supplies feature separate digital-panel meters for monitoring voltage and current simultaneously, giving you precise reading and control capability. All models also feature 10-turn potentiometers for accurate adjustment of voltage and current output settings.
With 0.01 percent load and line regulation, these instruments keep the output steady when power line and load changes occur.
The low normal mode noise specification of less than 200 μVrms ensures clean power for precision circuitry.In all single-output models, either the positive or negative terminal can be connected to ground, providing a positive or negative voltage output. Outputs can also be floated up to 240 V from ground.
These instruments also feature adjustable current limits, letting you set the safest current limit without having to short the output.
These popular 30-watt bench supplies are designed for general laboratory use. The constant-voltage, constant-current output allows operation as either a voltage or current source. The changeover occurs automatically, based on the load. Each of these models has two ranges, allowing more current at a lower voltage. For higher output voltages, supplies can be connected in series. These models also feature overload protection. A continuously acting constant current curcuit protects the power supply against all overloads including a direct short placed across the terminals in a constant voltage operation.
These fexible 60-watt, single-range power supplies can be used as either voltage or current sources. When the output terminal voltage increases to a preset shut-down level, an overvoltage protection circuit disables the output to protect the device under test (DUT) for damage. The overvoltage protection feature can be easily monitored and adjusted from the front panel.
Using the remote sensing capability, these instruments automatically compensate for voltage drop in the load leads, so you obtain an accurate voltage at the DUT.
Using the remote analog voltage programming capability, these instruments can remotely vary the voltage, so you are able to control the regulation output voltage or current.
Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
- Range 1: 0 to 20 V, 0 to 3 A
- Range 2: NA
- Power (max): 60 W
Ripple & Noise from 20 Hz to 20 MHz
- Voltage rms: 200 µV
- Peak-to-Peak: 1 mV
Load & Line Regulation
- 0.01% + 2 mV
Meter Resolution
- Voltage: 10 mV (0-20 V), 100 mV (>20 V)
- Current: 10 mA
-
Date Acquisition/Switch Unit
KEYSIGHT – Agilent/Hp 34972A
3-slot mainframe with USB and LAN
6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
8 switch and control plug-in modules to choose from
Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
50k readings of non-volatile memory holds data when power is removed
Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequencesThe Keysight 34970A data acquisition / data logger switch unit consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
Datasheet -
Power Supply
HP-Agilent/Keysight 6654A
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 500W GPIB 665x series provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Keysight 540W, single output 6654A is a fast and flexible power supply or automated testing, and is designed to increase test throughput with fast up- and downprogramm.
Output Ratings
Output voltage: 0 to 80 V
Output current (40°C): 0 to 6 A
Maximum current (50°C/55°C): 8.1 A/7.7 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 8 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 500 µV
Peak-to-Peak: 5 mV
Current rms: 3 mA
Datasheet