ItalianoShop
Showing 211–240 of 1386 results
-
Function/Arbitrary Waveform Generator, Waveform Generator
RIGOL DG812
The DG800 redefines the entry level waveform generator by bringing advanced capabilities like 16 bit high resolution, intuitive touch screen control, and a quiet fanless design to our most affordable line of generators. Add SiFi II point-to-point sampling technology and 2 MPts of standard arb memory and the DG800 Series delivers a powerful low cost generator for students and engineers alike.
- Unique SiFi II (Signal Fidelity II) technology: generate the arbitrary waveforms point by point; recover the signal without distortion; sample rate accurate and adjustable; jitter of all the output waveforms (including Sine, Pulse, etc.) as low as 200 ps
- 2 Mpts memory depth (standard); 8 Mpts memory depth (optional) per channel for arbitrary waveforms
- Optional dual-channel with the same performance, equivalent to two independent signal sources
- High frequency stability: ±1 ppm; low phase noise: -105 dBc/Hz
- Built-in high-order harmonic generator (at most 8-order harmonics)
- Built-in 7 digits/s, 240 MHz bandwidth full featured frequency counter
- Up to 160 built-in arbitrary waveforms, covering the common signals in engineering application, medical electronics, auto electronics, math processing, and other various fields
- Sample rate up to 125 MSa/s, vertical resolution 16 bits
- Arbitrary waveform sequence editing function available; arbitrary waveforms also can be generated through the PC software
- Various analog and digital modulation functions: AM, FM, PM, ASK, FSK, PSK, and PWM.
- Standard waveform combine function, capable of outputting specified waveforms combined with the basic waveforms
- Standard channel tracking function, when enabled, all the parameters of both channels are updated based on users' configurations
- USB Host&Device interface (standard); USB-GPIB function supported
- 4.3'' TFT color touch screen
- RS232, PRBS, and Dualtone outputs supported
SKU: n/a€259.00 View Product -
Oscilloscope 2 channels
RIGOL DS1102Z-E
The DS1000Z-E Series identifies cost-effective, high-performance digital oscilloscopes. It is designed to meet different needs and finds applications for development, testing and education activities.
It covers all fields attributable to the traditional digital oscilloscope market.
Technical specifications:
ModelDS1102Z-E
Bandwidth100 MHz
Analog Channels2
Sample Rate1GSa / s (Single-channel), 500MSa / s (Dual-channel),
Max Memory Depth24Mpts (standard, single channel), 12 Mpts (dual-channel)
Max. Waveform Capture rate30,000 wfms / s
Real Time waveform Record and ReplayUp to 60,000 Frames
Std. ProbesTwo PVP2350 350 MHz passive HighZ probes
DatasheetSKU: n/a€255.00 View Product -
Function/Arbitrary Waveform Generator
RIGOL DG811
The DG800 redefines the entry level waveform generator by bringing advanced capabilities like 16 bit high resolution, intuitive touch screen control, and a quiet fanless design to our most affordable line of generators. Add SiFi II point-to-point sampling technology and 2 MPts of standard arb memory and the DG800 Series delivers a powerful low cost generator for students and engineers alike.
High quality one channel function / arbitrary waveform generator with 10 MHz bandwidth, 125 MSa/s and 2 Mpts memory (up to 8Mpts as option).
• 16 Bit Resolution on All Models
• Intuitive Next Generation Touch Interface
• 10MHz to 100MHz Frequency Ranges
• Fanless Cooling for silent operation
• High Sample Rate and Long Memory
• Advanced Capabilities like Dual-Tone, Harmonics and Sequencing
• Complex Integrated Functions like PRBS Patterns and RS232 Generation
• Enhanced Waveform modes and Signal Fidelity with SiFi II technologySKU: n/a€239.00 View Product -
Fiberottic
Exfo FOT-20 A
The EXFO FOT-20A is an handheld Fiber-Optic Power Meter
• Calibrated Wavelengths: 850, 1300, and 1550 nm
• Power Measurement Range: 6 to -60 dBm (@ 1300 nm)
• FOT-20/FOT-20A Measures Direct Loss in dB
• ‘A’ Models Have Five Electronically Calibrated WavelengthsSKU: 373€195.50€2,500.00View Product -
Probe
DS1000Z PLUS OSCILLOSCOPE LOGIC PROBE RPL1116
Set of digital logic probes (RPL1116, 16 channel + 16 ground) for the MSO option of the Rigol DS1000Z-Plus series.
Insert it into front logic interface of DS1000Z Plus, then customer can use it. No extra License is needed
User's Guide / Datasheet downloads are available.
Set of digital logic probes (RPL1116, 16 channel + 16 ground) for the MSO option of the Rigol DS1000Z-Plus series.
Insert it into front logic interface of DS1000Z Plus, then customer can use it. No extra License is needed
SKU: n/a€190.00 View Product -
Power Supply
METAF HPS605D
Metaf HPS605D is a Single-channel direct current (0 – 5 A) and voltage (0 – 60 V) power supply unit with built-in LED display.
Features:
* Single-channel output.
* CC/CV auto switchable.
* 110V/220V switchable.
* Overload protection function.
* Overheat protection function.
* Short circuit protection function.
* Coarse/fine adjustment of voltage and current.
* Cooling with fan.
* 3/4 digital LED display for voltage and current.
DatasheetSKU: n/a€150.00 View Product -
Power Supply
METAF HPS3010D
Metaf HPS3010D is a Single-channel direct current (0 – 10 A) and voltage (0 – 30 V) power supply unit with built-in LED display.
Features:
* Single-channel output.
* CC/CV auto switchable.
* 110V/220V switchable.
* Overload protection function.
* Overheat protection function.
* Short circuit protection function.
* Coarse/fine adjustment of voltage and current.
* Cooling with fan.
* 3/4 digital LED display for voltage and current.
DatasheetSKU: n/a€140.00 View Product -
Power Supply
METAF HPS305D
Metaf HPS305D is a Single-channel direct current (0 – 5 A) and voltage (0 – 30 V) power supply unit with built-in LED display.
Features:
* Single-channel output.
* CC/CV auto switchable.
* 110V/220V switchable.
* Overload protection function.
* Overheat protection function.
* Short circuit protection function.
* Coarse/fine adjustment of voltage and current.
* Cooling with fan.
* 3/4 digital LED display for voltage and current.
DatasheetSKU: n/a€130.00 View Product -
Power Supply
H10S CLT-100
Exclusive power supply is required for DC screwdrivers.
● Exclusive power supply converts the electric current from AC outlet (on the primary side) to low-voltage output (HI: DC30V) or (LOW: about DC20V) to supply it to the screwdriver.
● Safe and quiet rotation.
● Please always use HIOS screwdriver in combination with HIOS power supply for safe screw tightening.
● Stable power supply with multiple inputs (AC100V to 240V).
(Not applicable to CLT-100 and MC-70L)SKU: n/a€120.00 View Product -
Power Meter
HP-Agilent/Keysight 435B
The HP 435B power meter is an analog power meter, compatible with the entire series of 8480 power sensors. Depending on which sensor is used, the 435B can measure power from -65 dBm to +44 dBm, full scale, at frequencies from 100 kHz to 110 GHz. This versatile instrument also features <1 percent instrumentation uncertainty, low noise and drift, auto-zero, recorder output, optional battery operation, and long cable options up to 61 m (200 ft). * Optional battery for fully portable operation * Accurate internal calibration source for long-term accuracy * Nine interchangeable sensors for a wide range of applications * Frequency Range: 100 kHz to 110 GHz * Power Range: -65 to +44 dBm * Instrumentation Accuracy: ±1% * Power Reference Output: 50 MHz/1MW
SKU: 23€85.00 View Product -
ADAPTOR
HUBER + SUHNER 33PC35-50-01-1/199 NE ADAPTOR PLUG/JACK 22644362
The HUBER + SUHNER 33PC35-50-01-1/199 NE is a Adaptor plug/jack PC 3.5 plug (male) / PC 3.5 jack (female).
It used for test and measurement applications precision adaptor* Interface 1: PC 3.5 plug (male)
* Interface 2: PC 3.5 jack (female)
* Impedance: 50 Ω
* Interface freq. Max: 33 GHz
* Frequency Range 1: 0 GHz to 18 GHz
* Frequency Range 2: 18 GHz to 26.5 GHz
* Return loss band 1: 28 dB
* Return loss band 2: 23 dB
* BATCH Nr 02.26942
* Manufacture code: 22644362
DatasheetSKU: n/a€50.00 View Product -
Termocamera
Flir T420
(Italiano) Risoluzione 320 x 240 pixel FLIR Serie T400 ha una risoluzione delle immagini termiche di 320 x 240 pixel. Sensibilità della termocamera FLIR Serie T400 ha una sensibilità termica di < 45 mK. Fotocamera di alta qualità Le termocamere FLIR Serie T400 sono dotate di fotocamera digitale integrata da 3,1 Megapixels che rende le ispezioni più semplici e veloci. Campo di misurazione A seconda del modello, le termocamere FLIR Serie T400 sono in grado di misurare temperature comprese tra -20 °C e +1,200 °C. Lenti ad infrarossi intercambiabili FLIR Serie T400 è dotata di lente standard da 25° e ottiche opzionali da 6°, 15°, 45° e 90°. Interfacce flessibili Le termocamere FLIR Serie T400 sono dotate di un’uscita video standard, cavo USB e scheda di memoria SD removibile. Filmati video MPEG-4 Possibilità di ceare filmati video MPEG-4 delle immagini ad infrarosso e visive. FLIR Thermal Fusion Fonde le immagini visive e quelle ad infrarossi per consentire un’analisi migliore. Allarmi sonori e visivi sulla temperatura Ispezioni più facili e veloci. FLIR Picture-in-Picture (PiP) Consente di sovrapporre un’immagine ad infarosso su quella nel visibile. Ridurla, spostarla ed ingrandirla, a seconda del modello. Annotazioni di testo e commenti vocali Le annotazioni di testo possono essere prese da un elenco predefinito o inserite tramite touch screen. Per i commenti vocali, è possibile collegare una cuffia. Bozze di disegno Possibilità di creare bozze di disegno direttamente su touch screen tramite penna a stilo. Disegno su immagine Consente di indicare le aree problematiche direttamente sull’immagine termica. Streaming di filmati IR radiometrici I video IR radiometrici a 16 bit possono essere inviati ad un PC (tramite USB) dotato del software FLIR. Memorizzazione delle immagini Immagini radiometriche in formato JPEG che consentono l’elaborazione e la reportistica mediante il software FLIR compatibile con Microsoft Word®. Touch screen Touch screen LCD da 3,5″ con penna a stilo, per portare l’interattività e la comodità dell’utente a livelli completamente nuovi. Modalità di misurazione Puntatore, area con indicazione automatica dei punti caldi/freddi, isoterme, calcolo ?T (a seconda del modello). Copy to USB È possibile trasferire le immagini o i report direttamente dalla termocamera ad una chiavetta USB. Report immediati Creazione immediata di report direttamente nella termocamera, facilmente copiabili su USB. Multi Spectral Dynamic Imaging (MSX)* L’innovativa funzione MSX produce un’immagine estremamente dettagliata. WiFi Connessione a smartphone o tablet tramite Wi-Fi, con l’applicazione FLIR Tools mobile app (Apple iOS e Android) per la gestione e la condivisione dei risultati, oltre che per il controllo remoto. – Zoom digitale continuo 1-4x, con funzionalità di mappatura – Da -20 °C a +650 °C in 3 intervalli: da -20 °C a +120 °C o da 0 °C a +350 °C o da +200 °C a +650 °C
SKU: 234€0.00 View Product
-
Function/Arbitrary Waveform Generator, Waveform Generator
RIGOL DG812
The DG800 redefines the entry level waveform generator by bringing advanced capabilities like 16 bit high resolution, intuitive touch screen control, and a quiet fanless design to our most affordable line of generators. Add SiFi II point-to-point sampling technology and 2 MPts of standard arb memory and the DG800 Series delivers a powerful low cost generator for students and engineers alike.
- Unique SiFi II (Signal Fidelity II) technology: generate the arbitrary waveforms point by point; recover the signal without distortion; sample rate accurate and adjustable; jitter of all the output waveforms (including Sine, Pulse, etc.) as low as 200 ps
- 2 Mpts memory depth (standard); 8 Mpts memory depth (optional) per channel for arbitrary waveforms
- Optional dual-channel with the same performance, equivalent to two independent signal sources
- High frequency stability: ±1 ppm; low phase noise: -105 dBc/Hz
- Built-in high-order harmonic generator (at most 8-order harmonics)
- Built-in 7 digits/s, 240 MHz bandwidth full featured frequency counter
- Up to 160 built-in arbitrary waveforms, covering the common signals in engineering application, medical electronics, auto electronics, math processing, and other various fields
- Sample rate up to 125 MSa/s, vertical resolution 16 bits
- Arbitrary waveform sequence editing function available; arbitrary waveforms also can be generated through the PC software
- Various analog and digital modulation functions: AM, FM, PM, ASK, FSK, PSK, and PWM.
- Standard waveform combine function, capable of outputting specified waveforms combined with the basic waveforms
- Standard channel tracking function, when enabled, all the parameters of both channels are updated based on users' configurations
- USB Host&Device interface (standard); USB-GPIB function supported
- 4.3'' TFT color touch screen
- RS232, PRBS, and Dualtone outputs supported
-
Oscilloscope 2 channels
RIGOL DS1102Z-E
The DS1000Z-E Series identifies cost-effective, high-performance digital oscilloscopes. It is designed to meet different needs and finds applications for development, testing and education activities.
It covers all fields attributable to the traditional digital oscilloscope market.
Technical specifications:
ModelDS1102Z-E
Bandwidth100 MHz
Analog Channels2
Sample Rate1GSa / s (Single-channel), 500MSa / s (Dual-channel),
Max Memory Depth24Mpts (standard, single channel), 12 Mpts (dual-channel)
Max. Waveform Capture rate30,000 wfms / s
Real Time waveform Record and ReplayUp to 60,000 Frames
Std. ProbesTwo PVP2350 350 MHz passive HighZ probes
Datasheet -
Function/Arbitrary Waveform Generator
RIGOL DG811
The DG800 redefines the entry level waveform generator by bringing advanced capabilities like 16 bit high resolution, intuitive touch screen control, and a quiet fanless design to our most affordable line of generators. Add SiFi II point-to-point sampling technology and 2 MPts of standard arb memory and the DG800 Series delivers a powerful low cost generator for students and engineers alike.
High quality one channel function / arbitrary waveform generator with 10 MHz bandwidth, 125 MSa/s and 2 Mpts memory (up to 8Mpts as option).
• 16 Bit Resolution on All Models
• Intuitive Next Generation Touch Interface
• 10MHz to 100MHz Frequency Ranges
• Fanless Cooling for silent operation
• High Sample Rate and Long Memory
• Advanced Capabilities like Dual-Tone, Harmonics and Sequencing
• Complex Integrated Functions like PRBS Patterns and RS232 Generation
• Enhanced Waveform modes and Signal Fidelity with SiFi II technology -
Probe
DS1000Z PLUS OSCILLOSCOPE LOGIC PROBE RPL1116
Set of digital logic probes (RPL1116, 16 channel + 16 ground) for the MSO option of the Rigol DS1000Z-Plus series.
Insert it into front logic interface of DS1000Z Plus, then customer can use it. No extra License is needed
User's Guide / Datasheet downloads are available.
Set of digital logic probes (RPL1116, 16 channel + 16 ground) for the MSO option of the Rigol DS1000Z-Plus series.
Insert it into front logic interface of DS1000Z Plus, then customer can use it. No extra License is needed
-
Power Supply
METAF HPS605D
Metaf HPS605D is a Single-channel direct current (0 – 5 A) and voltage (0 – 60 V) power supply unit with built-in LED display.
Features:
* Single-channel output.
* CC/CV auto switchable.
* 110V/220V switchable.
* Overload protection function.
* Overheat protection function.
* Short circuit protection function.
* Coarse/fine adjustment of voltage and current.
* Cooling with fan.
* 3/4 digital LED display for voltage and current.
Datasheet -
Power Supply
METAF HPS3010D
Metaf HPS3010D is a Single-channel direct current (0 – 10 A) and voltage (0 – 30 V) power supply unit with built-in LED display.
Features:
* Single-channel output.
* CC/CV auto switchable.
* 110V/220V switchable.
* Overload protection function.
* Overheat protection function.
* Short circuit protection function.
* Coarse/fine adjustment of voltage and current.
* Cooling with fan.
* 3/4 digital LED display for voltage and current.
Datasheet -
Power Supply
METAF HPS305D
Metaf HPS305D is a Single-channel direct current (0 – 5 A) and voltage (0 – 30 V) power supply unit with built-in LED display.
Features:
* Single-channel output.
* CC/CV auto switchable.
* 110V/220V switchable.
* Overload protection function.
* Overheat protection function.
* Short circuit protection function.
* Coarse/fine adjustment of voltage and current.
* Cooling with fan.
* 3/4 digital LED display for voltage and current.
Datasheet -
Power Supply
H10S CLT-100
Exclusive power supply is required for DC screwdrivers.
● Exclusive power supply converts the electric current from AC outlet (on the primary side) to low-voltage output (HI: DC30V) or (LOW: about DC20V) to supply it to the screwdriver.
● Safe and quiet rotation.
● Please always use HIOS screwdriver in combination with HIOS power supply for safe screw tightening.
● Stable power supply with multiple inputs (AC100V to 240V).
(Not applicable to CLT-100 and MC-70L) -
Power Meter
HP-Agilent/Keysight 435B
The HP 435B power meter is an analog power meter, compatible with the entire series of 8480 power sensors. Depending on which sensor is used, the 435B can measure power from -65 dBm to +44 dBm, full scale, at frequencies from 100 kHz to 110 GHz. This versatile instrument also features <1 percent instrumentation uncertainty, low noise and drift, auto-zero, recorder output, optional battery operation, and long cable options up to 61 m (200 ft). * Optional battery for fully portable operation * Accurate internal calibration source for long-term accuracy * Nine interchangeable sensors for a wide range of applications * Frequency Range: 100 kHz to 110 GHz * Power Range: -65 to +44 dBm * Instrumentation Accuracy: ±1% * Power Reference Output: 50 MHz/1MW
-
ADAPTOR
HUBER + SUHNER 33PC35-50-01-1/199 NE ADAPTOR PLUG/JACK 22644362
The HUBER + SUHNER 33PC35-50-01-1/199 NE is a Adaptor plug/jack PC 3.5 plug (male) / PC 3.5 jack (female).
It used for test and measurement applications precision adaptor* Interface 1: PC 3.5 plug (male)
* Interface 2: PC 3.5 jack (female)
* Impedance: 50 Ω
* Interface freq. Max: 33 GHz
* Frequency Range 1: 0 GHz to 18 GHz
* Frequency Range 2: 18 GHz to 26.5 GHz
* Return loss band 1: 28 dB
* Return loss band 2: 23 dB
* BATCH Nr 02.26942
* Manufacture code: 22644362
Datasheet -
Termocamera
Flir T420
(Italiano) Risoluzione 320 x 240 pixel FLIR Serie T400 ha una risoluzione delle immagini termiche di 320 x 240 pixel. Sensibilità della termocamera FLIR Serie T400 ha una sensibilità termica di < 45 mK. Fotocamera di alta qualità Le termocamere FLIR Serie T400 sono dotate di fotocamera digitale integrata da 3,1 Megapixels che rende le ispezioni più semplici e veloci. Campo di misurazione A seconda del modello, le termocamere FLIR Serie T400 sono in grado di misurare temperature comprese tra -20 °C e +1,200 °C. Lenti ad infrarossi intercambiabili FLIR Serie T400 è dotata di lente standard da 25° e ottiche opzionali da 6°, 15°, 45° e 90°. Interfacce flessibili Le termocamere FLIR Serie T400 sono dotate di un’uscita video standard, cavo USB e scheda di memoria SD removibile. Filmati video MPEG-4 Possibilità di ceare filmati video MPEG-4 delle immagini ad infrarosso e visive. FLIR Thermal Fusion Fonde le immagini visive e quelle ad infrarossi per consentire un’analisi migliore. Allarmi sonori e visivi sulla temperatura Ispezioni più facili e veloci. FLIR Picture-in-Picture (PiP) Consente di sovrapporre un’immagine ad infarosso su quella nel visibile. Ridurla, spostarla ed ingrandirla, a seconda del modello. Annotazioni di testo e commenti vocali Le annotazioni di testo possono essere prese da un elenco predefinito o inserite tramite touch screen. Per i commenti vocali, è possibile collegare una cuffia. Bozze di disegno Possibilità di creare bozze di disegno direttamente su touch screen tramite penna a stilo. Disegno su immagine Consente di indicare le aree problematiche direttamente sull’immagine termica. Streaming di filmati IR radiometrici I video IR radiometrici a 16 bit possono essere inviati ad un PC (tramite USB) dotato del software FLIR. Memorizzazione delle immagini Immagini radiometriche in formato JPEG che consentono l’elaborazione e la reportistica mediante il software FLIR compatibile con Microsoft Word®. Touch screen Touch screen LCD da 3,5″ con penna a stilo, per portare l’interattività e la comodità dell’utente a livelli completamente nuovi. Modalità di misurazione Puntatore, area con indicazione automatica dei punti caldi/freddi, isoterme, calcolo ?T (a seconda del modello). Copy to USB È possibile trasferire le immagini o i report direttamente dalla termocamera ad una chiavetta USB. Report immediati Creazione immediata di report direttamente nella termocamera, facilmente copiabili su USB. Multi Spectral Dynamic Imaging (MSX)* L’innovativa funzione MSX produce un’immagine estremamente dettagliata. WiFi Connessione a smartphone o tablet tramite Wi-Fi, con l’applicazione FLIR Tools mobile app (Apple iOS e Android) per la gestione e la condivisione dei risultati, oltre che per il controllo remoto. – Zoom digitale continuo 1-4x, con funzionalità di mappatura – Da -20 °C a +650 °C in 3 intervalli: da -20 °C a +120 °C o da 0 °C a +350 °C o da +200 °C a +650 °C
-
Function/Arbitrary Waveform Generator, Waveform Generator
RIGOL DG812
The DG800 redefines the entry level waveform generator by bringing advanced capabilities like 16 bit high resolution, intuitive touch screen control, and a quiet fanless design to our most affordable line of generators. Add SiFi II point-to-point sampling technology and 2 MPts of standard arb memory and the DG800 Series delivers a powerful low cost generator for students and engineers alike.
- Unique SiFi II (Signal Fidelity II) technology: generate the arbitrary waveforms point by point; recover the signal without distortion; sample rate accurate and adjustable; jitter of all the output waveforms (including Sine, Pulse, etc.) as low as 200 ps
- 2 Mpts memory depth (standard); 8 Mpts memory depth (optional) per channel for arbitrary waveforms
- Optional dual-channel with the same performance, equivalent to two independent signal sources
- High frequency stability: ±1 ppm; low phase noise: -105 dBc/Hz
- Built-in high-order harmonic generator (at most 8-order harmonics)
- Built-in 7 digits/s, 240 MHz bandwidth full featured frequency counter
- Up to 160 built-in arbitrary waveforms, covering the common signals in engineering application, medical electronics, auto electronics, math processing, and other various fields
- Sample rate up to 125 MSa/s, vertical resolution 16 bits
- Arbitrary waveform sequence editing function available; arbitrary waveforms also can be generated through the PC software
- Various analog and digital modulation functions: AM, FM, PM, ASK, FSK, PSK, and PWM.
- Standard waveform combine function, capable of outputting specified waveforms combined with the basic waveforms
- Standard channel tracking function, when enabled, all the parameters of both channels are updated based on users' configurations
- USB Host&Device interface (standard); USB-GPIB function supported
- 4.3'' TFT color touch screen
- RS232, PRBS, and Dualtone outputs supported
€259.00 View Product -
Oscilloscope 2 channels
RIGOL DS1102Z-E
The DS1000Z-E Series identifies cost-effective, high-performance digital oscilloscopes. It is designed to meet different needs and finds applications for development, testing and education activities.
It covers all fields attributable to the traditional digital oscilloscope market.
Technical specifications:
ModelDS1102Z-E
Bandwidth100 MHz
Analog Channels2
Sample Rate1GSa / s (Single-channel), 500MSa / s (Dual-channel),
Max Memory Depth24Mpts (standard, single channel), 12 Mpts (dual-channel)
Max. Waveform Capture rate30,000 wfms / s
Real Time waveform Record and ReplayUp to 60,000 Frames
Std. ProbesTwo PVP2350 350 MHz passive HighZ probes
Datasheet€255.00 View Product -
Function/Arbitrary Waveform Generator
RIGOL DG811
The DG800 redefines the entry level waveform generator by bringing advanced capabilities like 16 bit high resolution, intuitive touch screen control, and a quiet fanless design to our most affordable line of generators. Add SiFi II point-to-point sampling technology and 2 MPts of standard arb memory and the DG800 Series delivers a powerful low cost generator for students and engineers alike.
High quality one channel function / arbitrary waveform generator with 10 MHz bandwidth, 125 MSa/s and 2 Mpts memory (up to 8Mpts as option).
• 16 Bit Resolution on All Models
• Intuitive Next Generation Touch Interface
• 10MHz to 100MHz Frequency Ranges
• Fanless Cooling for silent operation
• High Sample Rate and Long Memory
• Advanced Capabilities like Dual-Tone, Harmonics and Sequencing
• Complex Integrated Functions like PRBS Patterns and RS232 Generation
• Enhanced Waveform modes and Signal Fidelity with SiFi II technology€239.00 View Product -
Fiberottic
Exfo FOT-20 A
The EXFO FOT-20A is an handheld Fiber-Optic Power Meter
• Calibrated Wavelengths: 850, 1300, and 1550 nm
• Power Measurement Range: 6 to -60 dBm (@ 1300 nm)
• FOT-20/FOT-20A Measures Direct Loss in dB
• ‘A’ Models Have Five Electronically Calibrated Wavelengths€195.50€2,500.00View Product -
Probe
DS1000Z PLUS OSCILLOSCOPE LOGIC PROBE RPL1116
Set of digital logic probes (RPL1116, 16 channel + 16 ground) for the MSO option of the Rigol DS1000Z-Plus series.
Insert it into front logic interface of DS1000Z Plus, then customer can use it. No extra License is needed
User's Guide / Datasheet downloads are available.
Set of digital logic probes (RPL1116, 16 channel + 16 ground) for the MSO option of the Rigol DS1000Z-Plus series.
Insert it into front logic interface of DS1000Z Plus, then customer can use it. No extra License is needed
€190.00 View Product -
Power Supply
METAF HPS605D
Metaf HPS605D is a Single-channel direct current (0 – 5 A) and voltage (0 – 60 V) power supply unit with built-in LED display.
Features:
* Single-channel output.
* CC/CV auto switchable.
* 110V/220V switchable.
* Overload protection function.
* Overheat protection function.
* Short circuit protection function.
* Coarse/fine adjustment of voltage and current.
* Cooling with fan.
* 3/4 digital LED display for voltage and current.
Datasheet€150.00 View Product -
Power Supply
METAF HPS3010D
Metaf HPS3010D is a Single-channel direct current (0 – 10 A) and voltage (0 – 30 V) power supply unit with built-in LED display.
Features:
* Single-channel output.
* CC/CV auto switchable.
* 110V/220V switchable.
* Overload protection function.
* Overheat protection function.
* Short circuit protection function.
* Coarse/fine adjustment of voltage and current.
* Cooling with fan.
* 3/4 digital LED display for voltage and current.
Datasheet€140.00 View Product -
Power Supply
METAF HPS305D
Metaf HPS305D is a Single-channel direct current (0 – 5 A) and voltage (0 – 30 V) power supply unit with built-in LED display.
Features:
* Single-channel output.
* CC/CV auto switchable.
* 110V/220V switchable.
* Overload protection function.
* Overheat protection function.
* Short circuit protection function.
* Coarse/fine adjustment of voltage and current.
* Cooling with fan.
* 3/4 digital LED display for voltage and current.
Datasheet€130.00 View Product -
Power Supply
H10S CLT-100
Exclusive power supply is required for DC screwdrivers.
● Exclusive power supply converts the electric current from AC outlet (on the primary side) to low-voltage output (HI: DC30V) or (LOW: about DC20V) to supply it to the screwdriver.
● Safe and quiet rotation.
● Please always use HIOS screwdriver in combination with HIOS power supply for safe screw tightening.
● Stable power supply with multiple inputs (AC100V to 240V).
(Not applicable to CLT-100 and MC-70L)€120.00 View Product -
Power Meter
HP-Agilent/Keysight 435B
The HP 435B power meter is an analog power meter, compatible with the entire series of 8480 power sensors. Depending on which sensor is used, the 435B can measure power from -65 dBm to +44 dBm, full scale, at frequencies from 100 kHz to 110 GHz. This versatile instrument also features <1 percent instrumentation uncertainty, low noise and drift, auto-zero, recorder output, optional battery operation, and long cable options up to 61 m (200 ft). * Optional battery for fully portable operation * Accurate internal calibration source for long-term accuracy * Nine interchangeable sensors for a wide range of applications * Frequency Range: 100 kHz to 110 GHz * Power Range: -65 to +44 dBm * Instrumentation Accuracy: ±1% * Power Reference Output: 50 MHz/1MW
€85.00 View Product -
ADAPTOR
HUBER + SUHNER 33PC35-50-01-1/199 NE ADAPTOR PLUG/JACK 22644362
The HUBER + SUHNER 33PC35-50-01-1/199 NE is a Adaptor plug/jack PC 3.5 plug (male) / PC 3.5 jack (female).
It used for test and measurement applications precision adaptor* Interface 1: PC 3.5 plug (male)
* Interface 2: PC 3.5 jack (female)
* Impedance: 50 Ω
* Interface freq. Max: 33 GHz
* Frequency Range 1: 0 GHz to 18 GHz
* Frequency Range 2: 18 GHz to 26.5 GHz
* Return loss band 1: 28 dB
* Return loss band 2: 23 dB
* BATCH Nr 02.26942
* Manufacture code: 22644362
Datasheet€50.00 View Product -
Termocamera
Flir T420
(Italiano) Risoluzione 320 x 240 pixel FLIR Serie T400 ha una risoluzione delle immagini termiche di 320 x 240 pixel. Sensibilità della termocamera FLIR Serie T400 ha una sensibilità termica di < 45 mK. Fotocamera di alta qualità Le termocamere FLIR Serie T400 sono dotate di fotocamera digitale integrata da 3,1 Megapixels che rende le ispezioni più semplici e veloci. Campo di misurazione A seconda del modello, le termocamere FLIR Serie T400 sono in grado di misurare temperature comprese tra -20 °C e +1,200 °C. Lenti ad infrarossi intercambiabili FLIR Serie T400 è dotata di lente standard da 25° e ottiche opzionali da 6°, 15°, 45° e 90°. Interfacce flessibili Le termocamere FLIR Serie T400 sono dotate di un’uscita video standard, cavo USB e scheda di memoria SD removibile. Filmati video MPEG-4 Possibilità di ceare filmati video MPEG-4 delle immagini ad infrarosso e visive. FLIR Thermal Fusion Fonde le immagini visive e quelle ad infrarossi per consentire un’analisi migliore. Allarmi sonori e visivi sulla temperatura Ispezioni più facili e veloci. FLIR Picture-in-Picture (PiP) Consente di sovrapporre un’immagine ad infarosso su quella nel visibile. Ridurla, spostarla ed ingrandirla, a seconda del modello. Annotazioni di testo e commenti vocali Le annotazioni di testo possono essere prese da un elenco predefinito o inserite tramite touch screen. Per i commenti vocali, è possibile collegare una cuffia. Bozze di disegno Possibilità di creare bozze di disegno direttamente su touch screen tramite penna a stilo. Disegno su immagine Consente di indicare le aree problematiche direttamente sull’immagine termica. Streaming di filmati IR radiometrici I video IR radiometrici a 16 bit possono essere inviati ad un PC (tramite USB) dotato del software FLIR. Memorizzazione delle immagini Immagini radiometriche in formato JPEG che consentono l’elaborazione e la reportistica mediante il software FLIR compatibile con Microsoft Word®. Touch screen Touch screen LCD da 3,5″ con penna a stilo, per portare l’interattività e la comodità dell’utente a livelli completamente nuovi. Modalità di misurazione Puntatore, area con indicazione automatica dei punti caldi/freddi, isoterme, calcolo ?T (a seconda del modello). Copy to USB È possibile trasferire le immagini o i report direttamente dalla termocamera ad una chiavetta USB. Report immediati Creazione immediata di report direttamente nella termocamera, facilmente copiabili su USB. Multi Spectral Dynamic Imaging (MSX)* L’innovativa funzione MSX produce un’immagine estremamente dettagliata. WiFi Connessione a smartphone o tablet tramite Wi-Fi, con l’applicazione FLIR Tools mobile app (Apple iOS e Android) per la gestione e la condivisione dei risultati, oltre che per il controllo remoto. – Zoom digitale continuo 1-4x, con funzionalità di mappatura – Da -20 °C a +650 °C in 3 intervalli: da -20 °C a +120 °C o da 0 °C a +350 °C o da +200 °C a +650 °C
€0.00 View Product