ItalianoShop
Showing 1021–1050 of 1386 results
-
Clamp Meter
EXTECH EX840
AC/DC Clamp-On Meter/Digital MultiMeter with built-in Infrared Thermometer
This CAT IV True RMS clamp meter features a built-in IR thermometer with laser pointer for non-contact surface measurements from -58 to 518 °F (-50 to 270 °C). Clamp measures AC current up to 1000 Amp with a maximum resolution of 0.1 Amp. The 1.7-inch jaw fits around conductors up to 750MCM. Peak hold captures motor inrush currents and other surges. Data hold and auto power off functions. Other functions include AC/DC Voltage, resistance, Type K thermometer, capacitance and frequency. Complete with test leads, Type K temperature probe, 9 Volt battery and case.
SKU: n/a -
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD55
The R&S CMD55 is capable of testing GSM1800 (formerly named PCN orDCS1800) and GSM1900 (formerly named PCS or DCS1900) mobile phones. This model combines small dimensions with high measurement accuracy and speed. The testers range of capabilities includes all signaling, generator and measurement functions required for verifying the correct operation of the DUT (Device Under Test).
Thanks to its fast go/nogo tests and accurate analysis using optional extensions, the CMD55 is equally well suited for R&D, production and high-end service and production. Based on the wide-range know-how of Rohde & Schwarz in digital radiocommunication testing, which not least was obtained in developing type-approval test systems such as the GSM900 and GSM1800 system simulators, the CMD model is a top-grade tester for present and future measurement applications.
Additional Features:
Mobile-to-base station synchronization
Location update
Incoming call setup
Outgoing call setup
Mobile power level control
Handover (channel change, timeslot change)
Dual-band handover
Peak power measurement
SACCH measurement (eg RxLev, RxQual, power level)
Echo test
Call clearing by mobile
Call clearing by network
DC current/voltage measurement
Phase and frequency error measurement
Measurement of power ramp as a function of time
Bit-error rate (BER) measurementSKU: n/a -
compact real-time spectrum analyzer/receiver
HAROGIC SAM-80
Main features:
9 kHz~8.5 GHz real-time spectrum analyzer/receiver
Integrated 100 kHz-6.3 GHz analog signal generator (option)
100MHz analysis bandwidth, 300 GHz/sec spectrum sweep speed
FPGA based digital signal processing
Weight 159 grams (core module), size 142 × 54 × 16 mm, power consumption 7-10 W
Highly compatible API interfaces and SAStudio4 GUI
Compatible with ARM and x86 processors, Linux and Windows operating systems
Operating temperatures range from -20 ℃/-40 ℃ to 70 ℃ (option)
USB 3.0/2.0 Type-C interface
DatasheetSKU: n/a -
Oscilloscope 2 channels
Rigol DS4012
100 MHz, 2 ch, 4 GS/s
The DS4000 series digital oscilloscope is a versatile, high performance oscilloscope that incorporates many of today’s most advanced technologies and processes. Featuring bandwidths between 100MHz and 500MHz, sample rates up to 4GSa/s and up to 4 analog channels, the DS4000 is ideal for a wide variety of markets including communications, defense, aerospace, industrial electronics, R&D and educational fields. – 100 MHz bandwidth – 4 GSa/s sample rate – 2 Analog channels available – 140 million memory points, standard – 110,000 Waveforms per second – Original Ultravision technology – Hardware allows for real-time, continuous waveform recording and waveform analysisSKU: 219 -
Spectrum Analyzer
HP-Agilent/Keysight 8594EM
Spectrum Analyzer – Frequency 9 kHz to 2.9 GHz – Input Impedance 50 Ohm – Sweep Time 20 ms to 100 s – Resolution Bandwidth 30 Hz to 3 MHz – Single-Side-Band Noise -105 dBc/Hz to -90 dBc/Hz – Maximum Safe AC Input 30 dBm – Maximum DC Input 0 V – Displayed Average Noise -122 dBm to -107 dBm
9 kHz to 2.9 GHzSKU: 539
-
Clamp Meter
EXTECH EX840
AC/DC Clamp-On Meter/Digital MultiMeter with built-in Infrared Thermometer
This CAT IV True RMS clamp meter features a built-in IR thermometer with laser pointer for non-contact surface measurements from -58 to 518 °F (-50 to 270 °C). Clamp measures AC current up to 1000 Amp with a maximum resolution of 0.1 Amp. The 1.7-inch jaw fits around conductors up to 750MCM. Peak hold captures motor inrush currents and other surges. Data hold and auto power off functions. Other functions include AC/DC Voltage, resistance, Type K thermometer, capacitance and frequency. Complete with test leads, Type K temperature probe, 9 Volt battery and case.
-
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD55
The R&S CMD55 is capable of testing GSM1800 (formerly named PCN orDCS1800) and GSM1900 (formerly named PCS or DCS1900) mobile phones. This model combines small dimensions with high measurement accuracy and speed. The testers range of capabilities includes all signaling, generator and measurement functions required for verifying the correct operation of the DUT (Device Under Test).
Thanks to its fast go/nogo tests and accurate analysis using optional extensions, the CMD55 is equally well suited for R&D, production and high-end service and production. Based on the wide-range know-how of Rohde & Schwarz in digital radiocommunication testing, which not least was obtained in developing type-approval test systems such as the GSM900 and GSM1800 system simulators, the CMD model is a top-grade tester for present and future measurement applications.
Additional Features:
Mobile-to-base station synchronization
Location update
Incoming call setup
Outgoing call setup
Mobile power level control
Handover (channel change, timeslot change)
Dual-band handover
Peak power measurement
SACCH measurement (eg RxLev, RxQual, power level)
Echo test
Call clearing by mobile
Call clearing by network
DC current/voltage measurement
Phase and frequency error measurement
Measurement of power ramp as a function of time
Bit-error rate (BER) measurement -
compact real-time spectrum analyzer/receiver
HAROGIC SAM-80
Main features:
9 kHz~8.5 GHz real-time spectrum analyzer/receiver
Integrated 100 kHz-6.3 GHz analog signal generator (option)
100MHz analysis bandwidth, 300 GHz/sec spectrum sweep speed
FPGA based digital signal processing
Weight 159 grams (core module), size 142 × 54 × 16 mm, power consumption 7-10 W
Highly compatible API interfaces and SAStudio4 GUI
Compatible with ARM and x86 processors, Linux and Windows operating systems
Operating temperatures range from -20 ℃/-40 ℃ to 70 ℃ (option)
USB 3.0/2.0 Type-C interface
Datasheet -
Oscilloscope 2 channels
Rigol DS4012
100 MHz, 2 ch, 4 GS/s
The DS4000 series digital oscilloscope is a versatile, high performance oscilloscope that incorporates many of today’s most advanced technologies and processes. Featuring bandwidths between 100MHz and 500MHz, sample rates up to 4GSa/s and up to 4 analog channels, the DS4000 is ideal for a wide variety of markets including communications, defense, aerospace, industrial electronics, R&D and educational fields. – 100 MHz bandwidth – 4 GSa/s sample rate – 2 Analog channels available – 140 million memory points, standard – 110,000 Waveforms per second – Original Ultravision technology – Hardware allows for real-time, continuous waveform recording and waveform analysis -
Spectrum Analyzer
HP-Agilent/Keysight 8594EM
Spectrum Analyzer – Frequency 9 kHz to 2.9 GHz – Input Impedance 50 Ohm – Sweep Time 20 ms to 100 s – Resolution Bandwidth 30 Hz to 3 MHz – Single-Side-Band Noise -105 dBc/Hz to -90 dBc/Hz – Maximum Safe AC Input 30 dBm – Maximum DC Input 0 V – Displayed Average Noise -122 dBm to -107 dBm
9 kHz to 2.9 GHz
-
Clamp Meter
EXTECH EX840
AC/DC Clamp-On Meter/Digital MultiMeter with built-in Infrared Thermometer
This CAT IV True RMS clamp meter features a built-in IR thermometer with laser pointer for non-contact surface measurements from -58 to 518 °F (-50 to 270 °C). Clamp measures AC current up to 1000 Amp with a maximum resolution of 0.1 Amp. The 1.7-inch jaw fits around conductors up to 750MCM. Peak hold captures motor inrush currents and other surges. Data hold and auto power off functions. Other functions include AC/DC Voltage, resistance, Type K thermometer, capacitance and frequency. Complete with test leads, Type K temperature probe, 9 Volt battery and case.
-
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD55
The R&S CMD55 is capable of testing GSM1800 (formerly named PCN orDCS1800) and GSM1900 (formerly named PCS or DCS1900) mobile phones. This model combines small dimensions with high measurement accuracy and speed. The testers range of capabilities includes all signaling, generator and measurement functions required for verifying the correct operation of the DUT (Device Under Test).
Thanks to its fast go/nogo tests and accurate analysis using optional extensions, the CMD55 is equally well suited for R&D, production and high-end service and production. Based on the wide-range know-how of Rohde & Schwarz in digital radiocommunication testing, which not least was obtained in developing type-approval test systems such as the GSM900 and GSM1800 system simulators, the CMD model is a top-grade tester for present and future measurement applications.
Additional Features:
Mobile-to-base station synchronization
Location update
Incoming call setup
Outgoing call setup
Mobile power level control
Handover (channel change, timeslot change)
Dual-band handover
Peak power measurement
SACCH measurement (eg RxLev, RxQual, power level)
Echo test
Call clearing by mobile
Call clearing by network
DC current/voltage measurement
Phase and frequency error measurement
Measurement of power ramp as a function of time
Bit-error rate (BER) measurement -
compact real-time spectrum analyzer/receiver
HAROGIC SAM-80
Main features:
9 kHz~8.5 GHz real-time spectrum analyzer/receiver
Integrated 100 kHz-6.3 GHz analog signal generator (option)
100MHz analysis bandwidth, 300 GHz/sec spectrum sweep speed
FPGA based digital signal processing
Weight 159 grams (core module), size 142 × 54 × 16 mm, power consumption 7-10 W
Highly compatible API interfaces and SAStudio4 GUI
Compatible with ARM and x86 processors, Linux and Windows operating systems
Operating temperatures range from -20 ℃/-40 ℃ to 70 ℃ (option)
USB 3.0/2.0 Type-C interface
Datasheet -
Oscilloscope 2 channels
Rigol DS4012
100 MHz, 2 ch, 4 GS/s
The DS4000 series digital oscilloscope is a versatile, high performance oscilloscope that incorporates many of today’s most advanced technologies and processes. Featuring bandwidths between 100MHz and 500MHz, sample rates up to 4GSa/s and up to 4 analog channels, the DS4000 is ideal for a wide variety of markets including communications, defense, aerospace, industrial electronics, R&D and educational fields. – 100 MHz bandwidth – 4 GSa/s sample rate – 2 Analog channels available – 140 million memory points, standard – 110,000 Waveforms per second – Original Ultravision technology – Hardware allows for real-time, continuous waveform recording and waveform analysis -
Spectrum Analyzer
HP-Agilent/Keysight 8594EM
Spectrum Analyzer – Frequency 9 kHz to 2.9 GHz – Input Impedance 50 Ohm – Sweep Time 20 ms to 100 s – Resolution Bandwidth 30 Hz to 3 MHz – Single-Side-Band Noise -105 dBc/Hz to -90 dBc/Hz – Maximum Safe AC Input 30 dBm – Maximum DC Input 0 V – Displayed Average Noise -122 dBm to -107 dBm
9 kHz to 2.9 GHz