ItalianoShop
Showing 991–1020 of 1386 results
-
Termocamera
Flir i7
(Italiano) FLIR i3/i5/i7 sono le più piccole, leggere ed accessibili termocamere esistenti sul mercato. Sono incredibilmente facili da utilizzare e non richiedono nessuna particolare esperienza d’uso.
E’ davvero una questione di “puntare-riprendere-localizzare” per ottenere immagini ad infrarosso di alta qualità che siano in grado di fornire immediatamente tutte le informazioni di cui necessiti.– Estremamente semplice da utilizzare La termocamera è estremamente facile da capire e da azionare ed è stata studiata per utenti non esperti. È intuitiva e corredata di un manuale esaustivo.
– Completamente automatica Consente di realizzare istantaneamente immagini termografiche in formato JPEG radiometrico, memorizzabili direttamente all’interno della termocamera o su supporto esterno, per essere poi analizzate ed inviate.
– Obiettivo senza messa a fuoco L’obiettivo fisso, che non necessita di messa a fuoco, rende l’utilizzo della termocamera FLIR i3/i5/i7 veramente semplice ed immediato.
– Compatta ed ultraleggera FLIR i3/i5/i7 pesano solo 365gr e possono essere facilmente trasportate all’interno del loro fodero.
– Estremamente robuste Le termocamere della Serie I sopportano cadute da due metri. Resistente a polvere e spruzzi, sono a norma IP43.
– Memorizzazione su scheda SD Salvataggio immagini radiometriche in formato JPEG, contenenti tutti i dati di misura, su scheda miniSD standard. Trasferimento di file su PC tramite USB. – Software di analisi e reportistica incluso Il software FLIR Tools è incluso. La termocamera è inoltre compatibile con l’avanzato software FLIR Reporter.
– Alta precisione L’elevata precisione di ±2 °C o ±2% produce immagini termiche sensibili per effettuare analisi rapide e precise. FLIR i5/i7 misurano temperature fino a +250 °C e rilevano differenze di temperatura anche di soli 0,10 °C.
– Funzioni di misura Puntatore, area con le temperature max./min., isoterma sopra/sotto (a seconda del modello). • Qualità dell’immagine termica: 60×60 pixels
– Campo visivo: 12.5°(orizz.) x 12.5°(vert.) • Solo puntatore • Thermal sensitivity: 0.15°C
SKU: 241 -
Senza categoria
Rohde & Schwarz CMD57 Digital RadioCommunication Tester
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress.SKU: n/a -
Rohde & Schwarz ESHS10
R&S ESHS10 EMI Test Receivers, 10: 9 kHz to 30 MHz
The receivers ESHS 10 is suitables for measuring electromagnetic interference in line with commercial standards:
• CISPR16, VDE0876 and ANSI C63.2
• EN55011 to 55022, ETS, FCC, VCCI and VDE 0871 to 0879 and ANSI C63.4The instruments are ideal for routine tasks in industry such as development and approval tests in line with commercial standards. Featuring mains-independent battery powering, they are also suitable for mobile applications at EMC service providers, test houses and safety standard authorities.
Superior circuit design
• High measurement accuracy, typical error 0.5 dB
• Wide dynamic range, typical noise figure 7 dB with preamplifier, third-order intercept point 20 dBm (without preamplifier)
• Calibrated attenuator with high pulse loading capacity, switchable in 10-dB steps from 0 to 120 dB
• Comprehensive preselection filters
• Switchable preamplifier with wide dynamic range
• Crystal-stabilized, fast synthesizer with high resolution and sweep mode for fast frequency scanning
• High-level mixer with high oscillator rejection
• Delay-equalized IF filtersDemodulation
• Parallel detectors for average, peak and quasi-peak indication
• 60 dB operating range also for quasipeak and average value indication
• Highly linear envelope detector with more than 70 dB dynamic range
• AM and A0 demodulators (ESVS also FM)
• Logarithmic amplifier with more than 70 dB dynamic range
• Peak indication with automatic consideration of IF bandwidth correction values for broadband interference measurements
• Automatic overload detection in mixer stages and in test channel by permanently activated peak detectorsPowerful processor system
• Manual operation or internal or external processor control
• Flash EPROMs for convenient and fast firmware update through PC
• Macros for automatic and semiautomatic test runs
• Automatic level calibration
• Automatic consideration of frequencydependent transducer factors
• All built-in functions fully programmable via IEC/IEE bus
• Fast measurement in external trigger mode; output of up to 5000 values/s via IEC/IEEE bus, up to 400 values/s including frequency change within certain frequency bands
• 12-bit A/D converter with short conversion time, measurement time selectable between 1 ms and 100 s
• High measurement accuracy thanks to automatic total calibration
• Automatic monitoring of all synthesizer loops and supply voltages during operationOptimum result display and printout
• Measurement of voltage, field strength, current and pulse spectral density with display of relevant units
• Indication of result on analog meter or digital display with 0.1 dB resolution
• Output of results as lists and diagrams on printer including limit linesFurther features
• Digital level indication on LCD and analog level indication on moving-coil meter taking into account transducer factors and their units
• Numerous interfaces for driving or feeding additional devices
• AC supply as well as battery powering for mobile applications
DatasheetSKU: n/a
-
Termocamera
Flir i7
(Italiano) FLIR i3/i5/i7 sono le più piccole, leggere ed accessibili termocamere esistenti sul mercato. Sono incredibilmente facili da utilizzare e non richiedono nessuna particolare esperienza d’uso.
E’ davvero una questione di “puntare-riprendere-localizzare” per ottenere immagini ad infrarosso di alta qualità che siano in grado di fornire immediatamente tutte le informazioni di cui necessiti.– Estremamente semplice da utilizzare La termocamera è estremamente facile da capire e da azionare ed è stata studiata per utenti non esperti. È intuitiva e corredata di un manuale esaustivo.
– Completamente automatica Consente di realizzare istantaneamente immagini termografiche in formato JPEG radiometrico, memorizzabili direttamente all’interno della termocamera o su supporto esterno, per essere poi analizzate ed inviate.
– Obiettivo senza messa a fuoco L’obiettivo fisso, che non necessita di messa a fuoco, rende l’utilizzo della termocamera FLIR i3/i5/i7 veramente semplice ed immediato.
– Compatta ed ultraleggera FLIR i3/i5/i7 pesano solo 365gr e possono essere facilmente trasportate all’interno del loro fodero.
– Estremamente robuste Le termocamere della Serie I sopportano cadute da due metri. Resistente a polvere e spruzzi, sono a norma IP43.
– Memorizzazione su scheda SD Salvataggio immagini radiometriche in formato JPEG, contenenti tutti i dati di misura, su scheda miniSD standard. Trasferimento di file su PC tramite USB. – Software di analisi e reportistica incluso Il software FLIR Tools è incluso. La termocamera è inoltre compatibile con l’avanzato software FLIR Reporter.
– Alta precisione L’elevata precisione di ±2 °C o ±2% produce immagini termiche sensibili per effettuare analisi rapide e precise. FLIR i5/i7 misurano temperature fino a +250 °C e rilevano differenze di temperatura anche di soli 0,10 °C.
– Funzioni di misura Puntatore, area con le temperature max./min., isoterma sopra/sotto (a seconda del modello). • Qualità dell’immagine termica: 60×60 pixels
– Campo visivo: 12.5°(orizz.) x 12.5°(vert.) • Solo puntatore • Thermal sensitivity: 0.15°C
-
Senza categoria
Rohde & Schwarz CMD57 Digital RadioCommunication Tester
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress. -
Rohde & Schwarz ESHS10
R&S ESHS10 EMI Test Receivers, 10: 9 kHz to 30 MHz
The receivers ESHS 10 is suitables for measuring electromagnetic interference in line with commercial standards:
• CISPR16, VDE0876 and ANSI C63.2
• EN55011 to 55022, ETS, FCC, VCCI and VDE 0871 to 0879 and ANSI C63.4The instruments are ideal for routine tasks in industry such as development and approval tests in line with commercial standards. Featuring mains-independent battery powering, they are also suitable for mobile applications at EMC service providers, test houses and safety standard authorities.
Superior circuit design
• High measurement accuracy, typical error 0.5 dB
• Wide dynamic range, typical noise figure 7 dB with preamplifier, third-order intercept point 20 dBm (without preamplifier)
• Calibrated attenuator with high pulse loading capacity, switchable in 10-dB steps from 0 to 120 dB
• Comprehensive preselection filters
• Switchable preamplifier with wide dynamic range
• Crystal-stabilized, fast synthesizer with high resolution and sweep mode for fast frequency scanning
• High-level mixer with high oscillator rejection
• Delay-equalized IF filtersDemodulation
• Parallel detectors for average, peak and quasi-peak indication
• 60 dB operating range also for quasipeak and average value indication
• Highly linear envelope detector with more than 70 dB dynamic range
• AM and A0 demodulators (ESVS also FM)
• Logarithmic amplifier with more than 70 dB dynamic range
• Peak indication with automatic consideration of IF bandwidth correction values for broadband interference measurements
• Automatic overload detection in mixer stages and in test channel by permanently activated peak detectorsPowerful processor system
• Manual operation or internal or external processor control
• Flash EPROMs for convenient and fast firmware update through PC
• Macros for automatic and semiautomatic test runs
• Automatic level calibration
• Automatic consideration of frequencydependent transducer factors
• All built-in functions fully programmable via IEC/IEE bus
• Fast measurement in external trigger mode; output of up to 5000 values/s via IEC/IEEE bus, up to 400 values/s including frequency change within certain frequency bands
• 12-bit A/D converter with short conversion time, measurement time selectable between 1 ms and 100 s
• High measurement accuracy thanks to automatic total calibration
• Automatic monitoring of all synthesizer loops and supply voltages during operationOptimum result display and printout
• Measurement of voltage, field strength, current and pulse spectral density with display of relevant units
• Indication of result on analog meter or digital display with 0.1 dB resolution
• Output of results as lists and diagrams on printer including limit linesFurther features
• Digital level indication on LCD and analog level indication on moving-coil meter taking into account transducer factors and their units
• Numerous interfaces for driving or feeding additional devices
• AC supply as well as battery powering for mobile applications
Datasheet
-
Termocamera
Flir i7
(Italiano) FLIR i3/i5/i7 sono le più piccole, leggere ed accessibili termocamere esistenti sul mercato. Sono incredibilmente facili da utilizzare e non richiedono nessuna particolare esperienza d’uso.
E’ davvero una questione di “puntare-riprendere-localizzare” per ottenere immagini ad infrarosso di alta qualità che siano in grado di fornire immediatamente tutte le informazioni di cui necessiti.– Estremamente semplice da utilizzare La termocamera è estremamente facile da capire e da azionare ed è stata studiata per utenti non esperti. È intuitiva e corredata di un manuale esaustivo.
– Completamente automatica Consente di realizzare istantaneamente immagini termografiche in formato JPEG radiometrico, memorizzabili direttamente all’interno della termocamera o su supporto esterno, per essere poi analizzate ed inviate.
– Obiettivo senza messa a fuoco L’obiettivo fisso, che non necessita di messa a fuoco, rende l’utilizzo della termocamera FLIR i3/i5/i7 veramente semplice ed immediato.
– Compatta ed ultraleggera FLIR i3/i5/i7 pesano solo 365gr e possono essere facilmente trasportate all’interno del loro fodero.
– Estremamente robuste Le termocamere della Serie I sopportano cadute da due metri. Resistente a polvere e spruzzi, sono a norma IP43.
– Memorizzazione su scheda SD Salvataggio immagini radiometriche in formato JPEG, contenenti tutti i dati di misura, su scheda miniSD standard. Trasferimento di file su PC tramite USB. – Software di analisi e reportistica incluso Il software FLIR Tools è incluso. La termocamera è inoltre compatibile con l’avanzato software FLIR Reporter.
– Alta precisione L’elevata precisione di ±2 °C o ±2% produce immagini termiche sensibili per effettuare analisi rapide e precise. FLIR i5/i7 misurano temperature fino a +250 °C e rilevano differenze di temperatura anche di soli 0,10 °C.
– Funzioni di misura Puntatore, area con le temperature max./min., isoterma sopra/sotto (a seconda del modello). • Qualità dell’immagine termica: 60×60 pixels
– Campo visivo: 12.5°(orizz.) x 12.5°(vert.) • Solo puntatore • Thermal sensitivity: 0.15°C
-
Senza categoria
Rohde & Schwarz CMD57 Digital RadioCommunication Tester
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress. -
Rohde & Schwarz ESHS10
R&S ESHS10 EMI Test Receivers, 10: 9 kHz to 30 MHz
The receivers ESHS 10 is suitables for measuring electromagnetic interference in line with commercial standards:
• CISPR16, VDE0876 and ANSI C63.2
• EN55011 to 55022, ETS, FCC, VCCI and VDE 0871 to 0879 and ANSI C63.4The instruments are ideal for routine tasks in industry such as development and approval tests in line with commercial standards. Featuring mains-independent battery powering, they are also suitable for mobile applications at EMC service providers, test houses and safety standard authorities.
Superior circuit design
• High measurement accuracy, typical error 0.5 dB
• Wide dynamic range, typical noise figure 7 dB with preamplifier, third-order intercept point 20 dBm (without preamplifier)
• Calibrated attenuator with high pulse loading capacity, switchable in 10-dB steps from 0 to 120 dB
• Comprehensive preselection filters
• Switchable preamplifier with wide dynamic range
• Crystal-stabilized, fast synthesizer with high resolution and sweep mode for fast frequency scanning
• High-level mixer with high oscillator rejection
• Delay-equalized IF filtersDemodulation
• Parallel detectors for average, peak and quasi-peak indication
• 60 dB operating range also for quasipeak and average value indication
• Highly linear envelope detector with more than 70 dB dynamic range
• AM and A0 demodulators (ESVS also FM)
• Logarithmic amplifier with more than 70 dB dynamic range
• Peak indication with automatic consideration of IF bandwidth correction values for broadband interference measurements
• Automatic overload detection in mixer stages and in test channel by permanently activated peak detectorsPowerful processor system
• Manual operation or internal or external processor control
• Flash EPROMs for convenient and fast firmware update through PC
• Macros for automatic and semiautomatic test runs
• Automatic level calibration
• Automatic consideration of frequencydependent transducer factors
• All built-in functions fully programmable via IEC/IEE bus
• Fast measurement in external trigger mode; output of up to 5000 values/s via IEC/IEEE bus, up to 400 values/s including frequency change within certain frequency bands
• 12-bit A/D converter with short conversion time, measurement time selectable between 1 ms and 100 s
• High measurement accuracy thanks to automatic total calibration
• Automatic monitoring of all synthesizer loops and supply voltages during operationOptimum result display and printout
• Measurement of voltage, field strength, current and pulse spectral density with display of relevant units
• Indication of result on analog meter or digital display with 0.1 dB resolution
• Output of results as lists and diagrams on printer including limit linesFurther features
• Digital level indication on LCD and analog level indication on moving-coil meter taking into account transducer factors and their units
• Numerous interfaces for driving or feeding additional devices
• AC supply as well as battery powering for mobile applications
Datasheet