ItalianoShop
Showing 571–600 of 1499 results
-
Module
HP-Agilent/Keysight 34906A
The HP 34906A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation. The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies–create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 75 Ohm
– Cascade together for up to 16:1 multiplexer
– BNC to SMB adapter cables includedSKU: 1144 -
Module
HP-Agilent/Keysight 34905A
The HP 34905A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation.
The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 GHz bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies– create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 50 Ohm
– Cascade together for up to 16:1 multiplexerSKU: 1143 -
Module
AGILENT 34903A – 20 Channel Actuator/GP Switch Module for 34970A/34972A
The Agilent 34903A is a general-purpose switch module for the 34970A/34972A Data Acquisition/Switch Unit. It has 20 independent single-pole, double-throw (SPDT) relays and is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. Its 300 V, 1 A contacts can handle up to 50 W, enough for many power line switching applications.
* 20 Channel Actuator/GP Switch
* SPDT (Form C) latching relays
* 300 V, 1 A actuation and controlSKU: 1142 -
Signal Generator
HP-Agilent/Keysight 8656B
100 kHz to 990 MHz frequency coverage
<35 ms frequency switching speed AM and FM capabilities ±1 dB level accuracy Amplitude offset and phase adjust capabilities The Keysight 8656B is a programmable synthesized signal generator that combines performance, quality, and economy, covering the 0.1 to 990 MHz frequency range. Offering ±1 dB level accuracy and 0.1 dB resolution with calibrated output levels over the +13 to -127 dBm range, the Keysight 8656B provides precise output control. In addition, its modulation capabilities include simultaneous and mixed modulation modes from internal (400 Hz and 1 KHz tones) and external sources. These features create a versatile signal generator, for use in a variety if applications. DatasheetSKU: 1138 -
Digital Multimeter
HP-Agilent/Keysight 3478A
The HP 3478A is a digital multimeter and provides a low cost, full function, reliable DMM for system measurements. The 3478A can measure DCV, true RMS ACV, 2- and 4-wire ohms, and dc and ac current. Simple, fast electronic calibration eliminates all adjustments to provide a lower cost of ownership. Selectable 3 1/2 to 5 1/2 digit resolution and 5 autoranging functions offer flexibility in automated testing.
SKU: 1124 -
Date Acquisition/Switch Unit
AGILENT-Hp/Keysight 34970A
The Agilent 34970A data acquisition / data logger switch consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
* 3-slot mainframe with built-in GPIB and RS232 interfaces
* 6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
* 8 switch and control plug-in modules to choose from
* Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
* 50k readings of non-volatile memory holds data when power is removed
* Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
* A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequencesSKU: 1118
-
Module
HP-Agilent/Keysight 34906A
The HP 34906A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation. The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies–create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 75 Ohm
– Cascade together for up to 16:1 multiplexer
– BNC to SMB adapter cables included -
Module
HP-Agilent/Keysight 34905A
The HP 34905A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation.
The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 GHz bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies– create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 50 Ohm
– Cascade together for up to 16:1 multiplexer -
Module
AGILENT 34903A – 20 Channel Actuator/GP Switch Module for 34970A/34972A
The Agilent 34903A is a general-purpose switch module for the 34970A/34972A Data Acquisition/Switch Unit. It has 20 independent single-pole, double-throw (SPDT) relays and is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. Its 300 V, 1 A contacts can handle up to 50 W, enough for many power line switching applications.
* 20 Channel Actuator/GP Switch
* SPDT (Form C) latching relays
* 300 V, 1 A actuation and control -
Signal Generator
HP-Agilent/Keysight 8656B
100 kHz to 990 MHz frequency coverage
<35 ms frequency switching speed AM and FM capabilities ±1 dB level accuracy Amplitude offset and phase adjust capabilities The Keysight 8656B is a programmable synthesized signal generator that combines performance, quality, and economy, covering the 0.1 to 990 MHz frequency range. Offering ±1 dB level accuracy and 0.1 dB resolution with calibrated output levels over the +13 to -127 dBm range, the Keysight 8656B provides precise output control. In addition, its modulation capabilities include simultaneous and mixed modulation modes from internal (400 Hz and 1 KHz tones) and external sources. These features create a versatile signal generator, for use in a variety if applications. Datasheet -
Digital Multimeter
HP-Agilent/Keysight 3478A
The HP 3478A is a digital multimeter and provides a low cost, full function, reliable DMM for system measurements. The 3478A can measure DCV, true RMS ACV, 2- and 4-wire ohms, and dc and ac current. Simple, fast electronic calibration eliminates all adjustments to provide a lower cost of ownership. Selectable 3 1/2 to 5 1/2 digit resolution and 5 autoranging functions offer flexibility in automated testing.
-
Date Acquisition/Switch Unit
AGILENT-Hp/Keysight 34970A
The Agilent 34970A data acquisition / data logger switch consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
* 3-slot mainframe with built-in GPIB and RS232 interfaces
* 6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
* 8 switch and control plug-in modules to choose from
* Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
* 50k readings of non-volatile memory holds data when power is removed
* Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
* A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences
-
Module
HP-Agilent/Keysight 34906A
The HP 34906A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation. The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies–create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 75 Ohm
– Cascade together for up to 16:1 multiplexer
– BNC to SMB adapter cables included -
Module
HP-Agilent/Keysight 34905A
The HP 34905A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation.
The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 GHz bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies– create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 50 Ohm
– Cascade together for up to 16:1 multiplexer -
Module
AGILENT 34903A – 20 Channel Actuator/GP Switch Module for 34970A/34972A
The Agilent 34903A is a general-purpose switch module for the 34970A/34972A Data Acquisition/Switch Unit. It has 20 independent single-pole, double-throw (SPDT) relays and is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. Its 300 V, 1 A contacts can handle up to 50 W, enough for many power line switching applications.
* 20 Channel Actuator/GP Switch
* SPDT (Form C) latching relays
* 300 V, 1 A actuation and control -
Signal Generator
HP-Agilent/Keysight 8656B
100 kHz to 990 MHz frequency coverage
<35 ms frequency switching speed AM and FM capabilities ±1 dB level accuracy Amplitude offset and phase adjust capabilities The Keysight 8656B is a programmable synthesized signal generator that combines performance, quality, and economy, covering the 0.1 to 990 MHz frequency range. Offering ±1 dB level accuracy and 0.1 dB resolution with calibrated output levels over the +13 to -127 dBm range, the Keysight 8656B provides precise output control. In addition, its modulation capabilities include simultaneous and mixed modulation modes from internal (400 Hz and 1 KHz tones) and external sources. These features create a versatile signal generator, for use in a variety if applications. Datasheet -
Digital Multimeter
HP-Agilent/Keysight 3478A
The HP 3478A is a digital multimeter and provides a low cost, full function, reliable DMM for system measurements. The 3478A can measure DCV, true RMS ACV, 2- and 4-wire ohms, and dc and ac current. Simple, fast electronic calibration eliminates all adjustments to provide a lower cost of ownership. Selectable 3 1/2 to 5 1/2 digit resolution and 5 autoranging functions offer flexibility in automated testing.
-
Date Acquisition/Switch Unit
AGILENT-Hp/Keysight 34970A
The Agilent 34970A data acquisition / data logger switch consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
* 3-slot mainframe with built-in GPIB and RS232 interfaces
* 6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
* 8 switch and control plug-in modules to choose from
* Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
* 50k readings of non-volatile memory holds data when power is removed
* Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
* A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences