ItalianoShop
Showing 541–570 of 1498 results
-
Waveguide Variable Attenuator
HP-Agilent/Keysight X382A
The attenuation value of this direct-reading, precision attenuator depends on the rotation angle of the resistive card, rather than on the resistivity value of the attenuating material. Therefore, it is insensitive to changes in temperature and humidity which can affect the resistive card of ordinary adjustable flap attenuators. The attenuation value is highly accurate and is stable from 0 to 50 dB. The instrument features large, easy-to-read dials, and can handle considerable microwave power. – Frequency range: 8.2 to 12.4 GHz. – Maximum SWR: 1.15. – Attenuation accuracy: ± 0.2% or 0.1 dB (whichever is greater). – Attenuation range: 0 to 50 dB. – Maximum power (CW): 10 Watts. – Waveguide designator: EIA WR-90 MIL-W-85/1-077. -Flange designator: UG-135/U MIL-F-3922/54C-008.
8.2 to 12.4 GHzSKU: 1204 -
Power Supply
HP-Agilent/Keysight 6654A
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 500W GPIB 665x series provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Keysight 540W, single output 6654A is a fast and flexible power supply or automated testing, and is designed to increase test throughput with fast up- and downprogramm.
Output Ratings
Output voltage: 0 to 80 V
Output current (40°C): 0 to 6 A
Maximum current (50°C/55°C): 8.1 A/7.7 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 8 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 500 µV
Peak-to-Peak: 5 mV
Current rms: 3 mA
DatasheetSKU: 1168 -
Power Supply
HP-Agilent/Keysight 6625A
Keysight high performance DC power supplies offer spec and accuracy for test optimization. The precision multiple output, 25W – 50W GPIB 6625A, 6626A, 6628A, and 6629A provide fast, low-noise outputs- dual-range, precision low current measurement- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. * Low-range volts, amps 25W: 0 to 7 V, 0 to 15 mA. * Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA. * High range volts, amps 25W: 0 to 50 V, 0 to 500 mA. * High range volts, amps 50W: 0 to 50 V, 0 to 1 A or, 0 to 16 V, 0 to 2 A. * Voltage 25W: 0.016% + 1.5 mV (low), 10 mV (high). * Voltage 50W: 0.016% + 53 mV (low), 10 mV (high). * Current 25W: 0.04% + 15 µA (low), 100 µA (high). * Current 50W: 0.04% + 185 µA (low), 500 µA (high). * Voltage rms: 500 µV. * Peak-to-peak: 3 mV. * Current rms: 0.1 mA.
25W or 50W, 2 outputsSKU: 1160 -
Module
AGILENT 34907A Multifunction Module for 34970A/34972A
The HP 34907A module for the 34970A/34972A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs – all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors.
It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.
Key Features & Specifications:
– 16 bits of digital input and output
– 100 kHz totalizer input
– Two +/-12V analog outputsSKU: 1145 -
Module
HP-Agilent/Keysight 34906A
The HP 34906A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation. The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies–create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 75 Ohm
– Cascade together for up to 16:1 multiplexer
– BNC to SMB adapter cables includedSKU: 1144
-
Waveguide Variable Attenuator
HP-Agilent/Keysight X382A
The attenuation value of this direct-reading, precision attenuator depends on the rotation angle of the resistive card, rather than on the resistivity value of the attenuating material. Therefore, it is insensitive to changes in temperature and humidity which can affect the resistive card of ordinary adjustable flap attenuators. The attenuation value is highly accurate and is stable from 0 to 50 dB. The instrument features large, easy-to-read dials, and can handle considerable microwave power. – Frequency range: 8.2 to 12.4 GHz. – Maximum SWR: 1.15. – Attenuation accuracy: ± 0.2% or 0.1 dB (whichever is greater). – Attenuation range: 0 to 50 dB. – Maximum power (CW): 10 Watts. – Waveguide designator: EIA WR-90 MIL-W-85/1-077. -Flange designator: UG-135/U MIL-F-3922/54C-008.
8.2 to 12.4 GHz -
Power Supply
HP-Agilent/Keysight 6654A
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 500W GPIB 665x series provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Keysight 540W, single output 6654A is a fast and flexible power supply or automated testing, and is designed to increase test throughput with fast up- and downprogramm.
Output Ratings
Output voltage: 0 to 80 V
Output current (40°C): 0 to 6 A
Maximum current (50°C/55°C): 8.1 A/7.7 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 8 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 500 µV
Peak-to-Peak: 5 mV
Current rms: 3 mA
Datasheet -
Power Supply
HP-Agilent/Keysight 6625A
Keysight high performance DC power supplies offer spec and accuracy for test optimization. The precision multiple output, 25W – 50W GPIB 6625A, 6626A, 6628A, and 6629A provide fast, low-noise outputs- dual-range, precision low current measurement- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. * Low-range volts, amps 25W: 0 to 7 V, 0 to 15 mA. * Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA. * High range volts, amps 25W: 0 to 50 V, 0 to 500 mA. * High range volts, amps 50W: 0 to 50 V, 0 to 1 A or, 0 to 16 V, 0 to 2 A. * Voltage 25W: 0.016% + 1.5 mV (low), 10 mV (high). * Voltage 50W: 0.016% + 53 mV (low), 10 mV (high). * Current 25W: 0.04% + 15 µA (low), 100 µA (high). * Current 50W: 0.04% + 185 µA (low), 500 µA (high). * Voltage rms: 500 µV. * Peak-to-peak: 3 mV. * Current rms: 0.1 mA.
25W or 50W, 2 outputs -
Module
AGILENT 34907A Multifunction Module for 34970A/34972A
The HP 34907A module for the 34970A/34972A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs – all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors.
It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.
Key Features & Specifications:
– 16 bits of digital input and output
– 100 kHz totalizer input
– Two +/-12V analog outputs -
Module
HP-Agilent/Keysight 34906A
The HP 34906A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation. The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies–create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 75 Ohm
– Cascade together for up to 16:1 multiplexer
– BNC to SMB adapter cables included
-
Waveguide Variable Attenuator
HP-Agilent/Keysight X382A
The attenuation value of this direct-reading, precision attenuator depends on the rotation angle of the resistive card, rather than on the resistivity value of the attenuating material. Therefore, it is insensitive to changes in temperature and humidity which can affect the resistive card of ordinary adjustable flap attenuators. The attenuation value is highly accurate and is stable from 0 to 50 dB. The instrument features large, easy-to-read dials, and can handle considerable microwave power. – Frequency range: 8.2 to 12.4 GHz. – Maximum SWR: 1.15. – Attenuation accuracy: ± 0.2% or 0.1 dB (whichever is greater). – Attenuation range: 0 to 50 dB. – Maximum power (CW): 10 Watts. – Waveguide designator: EIA WR-90 MIL-W-85/1-077. -Flange designator: UG-135/U MIL-F-3922/54C-008.
8.2 to 12.4 GHz -
Power Supply
HP-Agilent/Keysight 6654A
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 500W GPIB 665x series provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Keysight 540W, single output 6654A is a fast and flexible power supply or automated testing, and is designed to increase test throughput with fast up- and downprogramm.
Output Ratings
Output voltage: 0 to 80 V
Output current (40°C): 0 to 6 A
Maximum current (50°C/55°C): 8.1 A/7.7 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 8 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 500 µV
Peak-to-Peak: 5 mV
Current rms: 3 mA
Datasheet -
Power Supply
HP-Agilent/Keysight 6625A
Keysight high performance DC power supplies offer spec and accuracy for test optimization. The precision multiple output, 25W – 50W GPIB 6625A, 6626A, 6628A, and 6629A provide fast, low-noise outputs- dual-range, precision low current measurement- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. * Low-range volts, amps 25W: 0 to 7 V, 0 to 15 mA. * Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA. * High range volts, amps 25W: 0 to 50 V, 0 to 500 mA. * High range volts, amps 50W: 0 to 50 V, 0 to 1 A or, 0 to 16 V, 0 to 2 A. * Voltage 25W: 0.016% + 1.5 mV (low), 10 mV (high). * Voltage 50W: 0.016% + 53 mV (low), 10 mV (high). * Current 25W: 0.04% + 15 µA (low), 100 µA (high). * Current 50W: 0.04% + 185 µA (low), 500 µA (high). * Voltage rms: 500 µV. * Peak-to-peak: 3 mV. * Current rms: 0.1 mA.
25W or 50W, 2 outputs -
Module
AGILENT 34907A Multifunction Module for 34970A/34972A
The HP 34907A module for the 34970A/34972A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs – all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors.
It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.
Key Features & Specifications:
– 16 bits of digital input and output
– 100 kHz totalizer input
– Two +/-12V analog outputs -
Module
HP-Agilent/Keysight 34906A
The HP 34906A RF multiplexer module for the 34970A/34972A Data Acquisition/Switch Unit offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation. The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies–create a stubless 16:1 multiplexer in a single frame.
Key Features & Specifications:
– Dual 4 Channel RF Multiplexer
– 2 GHz bandwidth, 75 Ohm
– Cascade together for up to 16:1 multiplexer
– BNC to SMB adapter cables included