Shop
Showing 31–60 of 1373 results
-
Electronic Load Module, Lightwave Switch
HP-Agilent/Keysight 86060B
These electronic loads are particularly suited for the lab bench. Entering commands manually using the front panel keypad is simpler because the channel does not need to be specified, as in a mainframe configuration. Extensive protection is included to help protect your valuable prototypes under test. This includes overvoltage, over current, over temperature, overpower, and reverse polarity.
The Keysight 6060B is a 300 W, single output electronic load, ideal for evaluation of DC power sources and power components in bench applications. The 6060B has built-in measurement functions that make it convenient for testing single output applications in areas such as research and development, production, and incoming inspection.
The Keysight 6060B loads are suitable for manufacturing test systems where maximizing speed is not critical. They use industry standard SCPI instructions, and also have VXI Plug & Play drivers to simplify system design. For the greatest speed and accuracy in programming and measurement, see the DC Electronic Loads.
SKU: 399€650.00 View Product -
Power Sensor
HP-Agilent/Keysight 8481A
HP AGILENT KEYSIGHT 8481A POWER SENSOR 10 MHz to 18 GHz
The 8481A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM series, EPM-P series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters.
The 8481A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 10 MHz to 18 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -30 dBm to +20 dBm)
• 50 ohm impedance
• N (m) connectorSKU: n/a -
Scalar Network Analyzer
HP-Agilent/Keysight 8757A
Measure insertion loss or gain, return loss, SWR, power quickly and accurately with the new HP 8757A Scalar Network Analyzer. With high perforamance detectors and directional bridges and a companion HP source and digital plotter, the HP 8757A becomes the basis of a complete measurement system with superb performance.
-76 dB dynamic range
– Accurate swept power measurement (dBm)
– 40 dB directivity bridges
-Four independant display channels
-Limit testing built in
– Save/recall setup and cal data
-Direct plotter output
DatasheetSKU: n/a -
Network Analyzer
HP/Agilent-Keysight 8753D
The HP 8753D is a vector network analyzer and it offers even more flexibility and measurement capability than the HP 8752C in the following areas:
* Frequency range from 30 kHz to 3 GHz.
* Built-in S-parameter test set provides complete forward and reverse measurements, allowing you to completely characterize your component with a single connection.
* 50 and 75 ohm solutions.
* Superb accuracy. The most comprehensive calibration available guarantees accurate measurements. TRL**nRMt makes calibration in non-coaxial environments easier and more convenient.
* Mixer testing. Quickly and easily characterize frequency translating devices such as mixers.
* Add swept harmonic measurements. Characterize amplifter parameters – gain, 1 dB compression, match – and 2nd and 3rd harmonic distortion with the same test setup.
* Built-in 3.5 inch floppy disk drive provides convenient storage of instrument states and data.
* Parallel and serial ports provide interfaces to popular printers and plotters. The parallel port can also be used as a general U0 bus, with user-controllable TI'L inputs and outputs. Users can also connect a DIN keyboard to speed up entry of titles, labels, or file names, and for remote hnt panel operation.Two excellent choices, the HP 8752C and HP 8753D continue the tradition of affordable excellence in RF component measurements for the lab and production test areas. The HP 8752C and HP 8753D network analyzers bring superior performance and useful productivity features to simplify and speed your device, component, or network measurements in the 30 kHz to 6 GHz frequency range. A swept synthesized source, sensitive receiver, and crisp color display ensure rapid, accurate, and easy-to-read test results. Since the HP 8752C and HP 8753D are vector network analyzers, they not only provide magnitude and phase information, but also offer up to 1 10 dB dynamic range, make group delay and time domain measurements, and utilize vector accuracy enhancement to minimize measurement uncertainty.
DatasheetSKU: n/a -
Frequency Counter
HP/Agilent-Keysight 53131A
The two-channel 53131A counter offers 10 digits per second of frequency/period resolution and a bandwidth of 225 MHz. Time interval resolution is specified at 500 ps. An optional third channel provides frequency measurements up to 3, 5, or 12.4 GHz. Standard measurements include frequency, period, ratio, time interval, pulse width, rise/fall time, phase angle, duty cycle, totalize, and peak voltage.
Two 225 MHz input channels, plus optional third channel up to 12.4 GHz
10 digits per second, 500 ps time interval resolution
GPIB Standard
option 010 > Optional High Stability Timebase with Oven and Electronic Calibration
option 030 > 100 MHz to 3 GHzThe Keysight Technologies, Inc. 53131A/132A/181A high-performance counters give you fast, precise frequency measurements at an affordable price. These counters feature an intuitive user interface and one-button access to frequently used functions so you can make accurate measurements quickly and easily. Real-time digital signal processing technology is used to analyze data while simultaneously taking new readings, speeding measurement throughput. The technology, developed for Keysight’s high-end line of modulation domain analyzers, allows the counters to gather more data for each measurement, so you get higher-resolution measurements in a fraction of the time it takes other counters. The 53131A/132A/181A counters offer built-in statistics and math functions so you can scale measurements and simultaneously measure and track average, min/max and standard deviation. Automated limit testing lets you set upper and lower limits for any measurement. An analog display mode lets you see at a glance whether a measurement is within pass/fail limits. The counters flag out-of-limit conditions and can generate an output signal to trigger external devices when a limit is exceeded. For quick access to frequently used tests, a single keystroke recalls up to 20 different stored front-panel set-ups. For computer-controlled systems applications, each counter includes a standard GPIB interface with full SCPI-compatible programmability and a data transfer rate of up to 200 fully formatted measurements per second. The standard RS-232 talk-only interface provides printer support or data transfer to a computer through a terminal-emulation program.
DatasheetSKU: n/a -
Senza categoria
LUKEY 850D SMD REWORK STATION – HOT AIR SOLDERING STATION
Lukey 850D is a hot air single-channel soldering/desoldering station for working with SMD, QFP, PLCC, SOP, SOIC, CHIP, BGA components.
· Ultra-fast heating up to the required temperature.
· Temperature and blast control of the hot air station.
· Temperature control of the air stream by means of digital display and microprocessor system using “UP” and “DOWN” buttons with +/- 1C accuracy.
· Set automatic interrupting time at 30, 60 minutes and permanently (Sleep Timer) to prolong life time of the heating element.
· Station is completed with 4 exchangeable tips with different diameter to ensure universal application of the equipment.
· Heating element type: metallic incandescent wire
· Compressor type: diaphragm pump
· Airstream: 23 l/min (max)
· Operating surface resistivity on the
· Light and handy hot air station handle.
· Digital indication of real and fixed temperature
· Operating temperature range of hot air station: 100 – 420C “case”: up to 2Ohm
· ”Case” – to – operating surface potential difference: up to 2mV
· Galvanic isolation
· Made from anti-static materials.
· Hot air station power – 350W
· Automatic retroactive temperature control, holding up of constant temperature, irrespective of airspeed.
· Automatic cooling system. After soldering station is switched off, the hot air station is cold aired falling up less then 50C. This option prevents casual burns and prolongs the life time of the heating element.
· Supply voltage of the station: 220-240V AC
· Power consumption: 300W
· Heating element power consumption: 250W
· Compressor power consumption: 20W
SKU: n/a -
Attenuator
M/A-COM EUROTEC 2082-6042-10
RF Attenuator – Coaxial from XMA
Connectors SMA Male (Plug)/ SMA Female (Jack)
18 GHz, 500 W
The overall length of the XMA SMA Coaxial Attenuators are .86 inch for 3, 6 and 10 dB and 1.02 Inches for 20 and 30 dB.
The body is passivated stainless steel round body design with an operating temp range of -65c to +125c.
The maximum VSWR is < 1.15:1 @ DC-4GHz, <1.25:1 @ 4-12.3 GHz and <1.35 @ 12.4-18. DatasheetSKU: n/a -
Senza categoria
M/A-COM MICROWAVE POWER DEVICES AMPLIFIER 2-400 MHZ 200 WATTS
AMPLIFICATORE M/A-COM MICROWAVE POWER DEVICES,INC. HAUPPAUGE, N.Y. 11788
M/A-COM MICROWAVE POWER DEVICES SOLID STATE AMPLIFIER 1040-22/6140 + EWAL 0230-22/6140 + FILTER SWITCHING UNIT FS0240-22/6140 + EWAL 3010-22/6140SKU: n/a -
Base Station
MOTOROLA MTR2000 – BASE STATION, REPEATER AND RECEIVER
Motorola’s MTR 2000 Station/Repeater/Receiver is a continuous-duty analog base/repeater station for use on both conventional and trunking systems in the VHF, UHF, and 800 and 900 MHz bands.
Onboard self-testing and a microprocessor-based design keeps system up-time at a maximum.Provides Unmatched Flexibility in a Compact Design:
Analog operation in conventional systems
Analog operation in SMARTNET or SmartZone trunking systems
Software based design allows for future system applications
75-20 Watt variable power models 8 Compact dimensions, 3 rack units (5.25˝ or 13.3 cm), utilize expensive site space efficiently
12.5 or 25 kHz programmable channel spacing (800 MHz)
12.5 kHz channel spacing (900 MHz)
Contributes to Maximizing System Up-Time:Microprocessor based design with integrated DSP capability
Continuous duty cycle operation
Self testing monitors station performance
Switching power supply functions over a wide range of voltages and frequencies
Shortens Installation and Maintenance Time:Programming and diagnostic testing performed through a personal computer
Standard EIA 19˝ rack mount configuration
Lightweight (40 lbs/19 kg)
Functionally separate modules: Field Replaceable Units (FRU)
Software based design simplifies upgradesSKU: n/a -
RF Vector Network Analyzer
R&S ZVB4 Vector Network Analyzer 4 ports, 4 GHz
R&S ZVB4 is Vector Network Analyzer 4 ports, eith frequency range: 300 kHz to 4 GHz
* Medium-class network analyzer featuring outstanding performance
* Overrange up to 150 kHz (unspecified and without calibration ex factory)
* Capable of balanced measurements (mixed-mode S-parameters)
* option ZVAB-B4: Oven Quartz (OCXO) > The R&S ZVA/ZVB/ZVT can optionally be equipped with a 10 MHz oven-controlled crystal oscillator (OCXO) to enhance the frequency accuracy of the internal generators.
* TOSM Calibration Kit ZV-Z21SKU: n/a -
-
Oscilloscope 4 channles
RIGOL924S
250 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, AFG function, Bode Plot, 7” touch display
Analog channel bandwidth: 250 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
Integrates the AFG function, bode plot analysis, histogram, digital signal analysis, and etc
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interfaceSKU: n/a€790.00 View Product -
DC Electronic Load
Rigol DL3031
The Rigol DL3031 is a cost-effective programmable DC electronic load max. 150V, 60A, 350W. With USB Host, USB Device and RS232 interface. LAN is available as an option. with performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
SKU: 1298€959.00 View Product -
Digital Multimeter
Rigol DM3068
The Rigol DM3068 is a high quality digital benchtop multimeter from the DM3060 series with a very high sampling rate of up to max. 10 kSa/s. The Rigol multimeter comes with very well designed and easy to use controls which also offer comprehensive ease-of-use functions for all measurement tasks. The menu structure is very intuitive to use. The device helps you obtain precise measurement results in a wide range of applications. The LCD with its 256×64 pixels is highly legible and provides a good overview of the many individual functions. It has a maximum resolution of 6½ digits (maximum display value 2.400.000). Delivery including 2 probes, USB cable, pc software, power cable, 2 replacement fuses and manual. Function Max. Reading 2.400.000 (6½ digits) LCD 90 mm × 25 mm (256x64Pixel) Sampling rate 10 kSa/s Memory Depth (volatile) 512k readings (History) Memory Depth (non volatile) 10 groups of 5000 readings 5 groups of 5000 readings (Sensordata) Connections RS-232, USB Device, USB Host, Ext.Trig., VM Comp, 10/100MBit LAN, GPIB Details Rigol DM3068 Digital Multimeter Power supply 230 V / 50 Hz / 110 V / 60 Hz mains connection Safety standard CAT II/600 V Dimensions 290.5 mm × 231.6 mm × 107.0 mm (11.44″ × 9.12″ × 4.21″) Weight without accessories / packaging 2500 g (5.512 lbs) Weight with accessories / packaging 4465 g (9.844 lbs) Warranty 3 years
6 1/2 digit true RMS precision table multimeterSKU: 185€695.00 View Product -
Power Supply
Rigol DP821A
The Rigol DP821A is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 739€647.00 View Product -
Oscilloscope 4 channles
Rigol DS1054Z
The DS1000Z Series is the new economic level Digital Oscilloscope from Rigol to meet the customer's applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. The DS1000Z 4 channel oscilloscopes come in 70 or 100 MHz versions with a 7 inch display and Rigol's UltraVision technology as well as a host of options. Add the optional analysis, decoding, deep memory, and integrated 2 channel waveform generator for a powerful 4 channel scope at an exceptional price. 50MHz Bandwidth, 4 channels 1G Sa/s Real-time Sample Rate 12Mpts (Std.) and 24Mpts (Opt.) Memory Depth Innovative “UltraVision” technology Up to 30,000wfms/s Waveform Capture Rate 7 Inch WVGA (800×480), multiple intensity levels waveform display
50MHz, 4 channel, 1GS/s
DatasheetSKU: 856€335.00 View Product
-
Electronic Load Module, Lightwave Switch
HP-Agilent/Keysight 86060B
These electronic loads are particularly suited for the lab bench. Entering commands manually using the front panel keypad is simpler because the channel does not need to be specified, as in a mainframe configuration. Extensive protection is included to help protect your valuable prototypes under test. This includes overvoltage, over current, over temperature, overpower, and reverse polarity.
The Keysight 6060B is a 300 W, single output electronic load, ideal for evaluation of DC power sources and power components in bench applications. The 6060B has built-in measurement functions that make it convenient for testing single output applications in areas such as research and development, production, and incoming inspection.
The Keysight 6060B loads are suitable for manufacturing test systems where maximizing speed is not critical. They use industry standard SCPI instructions, and also have VXI Plug & Play drivers to simplify system design. For the greatest speed and accuracy in programming and measurement, see the DC Electronic Loads.
-
Power Sensor
HP-Agilent/Keysight 8481A
HP AGILENT KEYSIGHT 8481A POWER SENSOR 10 MHz to 18 GHz
The 8481A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM series, EPM-P series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters.
The 8481A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 10 MHz to 18 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -30 dBm to +20 dBm)
• 50 ohm impedance
• N (m) connector -
Scalar Network Analyzer
HP-Agilent/Keysight 8757A
Measure insertion loss or gain, return loss, SWR, power quickly and accurately with the new HP 8757A Scalar Network Analyzer. With high perforamance detectors and directional bridges and a companion HP source and digital plotter, the HP 8757A becomes the basis of a complete measurement system with superb performance.
-76 dB dynamic range
– Accurate swept power measurement (dBm)
– 40 dB directivity bridges
-Four independant display channels
-Limit testing built in
– Save/recall setup and cal data
-Direct plotter output
Datasheet -
Network Analyzer
HP/Agilent-Keysight 8753D
The HP 8753D is a vector network analyzer and it offers even more flexibility and measurement capability than the HP 8752C in the following areas:
* Frequency range from 30 kHz to 3 GHz.
* Built-in S-parameter test set provides complete forward and reverse measurements, allowing you to completely characterize your component with a single connection.
* 50 and 75 ohm solutions.
* Superb accuracy. The most comprehensive calibration available guarantees accurate measurements. TRL**nRMt makes calibration in non-coaxial environments easier and more convenient.
* Mixer testing. Quickly and easily characterize frequency translating devices such as mixers.
* Add swept harmonic measurements. Characterize amplifter parameters – gain, 1 dB compression, match – and 2nd and 3rd harmonic distortion with the same test setup.
* Built-in 3.5 inch floppy disk drive provides convenient storage of instrument states and data.
* Parallel and serial ports provide interfaces to popular printers and plotters. The parallel port can also be used as a general U0 bus, with user-controllable TI'L inputs and outputs. Users can also connect a DIN keyboard to speed up entry of titles, labels, or file names, and for remote hnt panel operation.Two excellent choices, the HP 8752C and HP 8753D continue the tradition of affordable excellence in RF component measurements for the lab and production test areas. The HP 8752C and HP 8753D network analyzers bring superior performance and useful productivity features to simplify and speed your device, component, or network measurements in the 30 kHz to 6 GHz frequency range. A swept synthesized source, sensitive receiver, and crisp color display ensure rapid, accurate, and easy-to-read test results. Since the HP 8752C and HP 8753D are vector network analyzers, they not only provide magnitude and phase information, but also offer up to 1 10 dB dynamic range, make group delay and time domain measurements, and utilize vector accuracy enhancement to minimize measurement uncertainty.
Datasheet -
Frequency Counter
HP/Agilent-Keysight 53131A
The two-channel 53131A counter offers 10 digits per second of frequency/period resolution and a bandwidth of 225 MHz. Time interval resolution is specified at 500 ps. An optional third channel provides frequency measurements up to 3, 5, or 12.4 GHz. Standard measurements include frequency, period, ratio, time interval, pulse width, rise/fall time, phase angle, duty cycle, totalize, and peak voltage.
Two 225 MHz input channels, plus optional third channel up to 12.4 GHz
10 digits per second, 500 ps time interval resolution
GPIB Standard
option 010 > Optional High Stability Timebase with Oven and Electronic Calibration
option 030 > 100 MHz to 3 GHzThe Keysight Technologies, Inc. 53131A/132A/181A high-performance counters give you fast, precise frequency measurements at an affordable price. These counters feature an intuitive user interface and one-button access to frequently used functions so you can make accurate measurements quickly and easily. Real-time digital signal processing technology is used to analyze data while simultaneously taking new readings, speeding measurement throughput. The technology, developed for Keysight’s high-end line of modulation domain analyzers, allows the counters to gather more data for each measurement, so you get higher-resolution measurements in a fraction of the time it takes other counters. The 53131A/132A/181A counters offer built-in statistics and math functions so you can scale measurements and simultaneously measure and track average, min/max and standard deviation. Automated limit testing lets you set upper and lower limits for any measurement. An analog display mode lets you see at a glance whether a measurement is within pass/fail limits. The counters flag out-of-limit conditions and can generate an output signal to trigger external devices when a limit is exceeded. For quick access to frequently used tests, a single keystroke recalls up to 20 different stored front-panel set-ups. For computer-controlled systems applications, each counter includes a standard GPIB interface with full SCPI-compatible programmability and a data transfer rate of up to 200 fully formatted measurements per second. The standard RS-232 talk-only interface provides printer support or data transfer to a computer through a terminal-emulation program.
Datasheet -
Senza categoria
LUKEY 850D SMD REWORK STATION – HOT AIR SOLDERING STATION
Lukey 850D is a hot air single-channel soldering/desoldering station for working with SMD, QFP, PLCC, SOP, SOIC, CHIP, BGA components.
· Ultra-fast heating up to the required temperature.
· Temperature and blast control of the hot air station.
· Temperature control of the air stream by means of digital display and microprocessor system using “UP” and “DOWN” buttons with +/- 1C accuracy.
· Set automatic interrupting time at 30, 60 minutes and permanently (Sleep Timer) to prolong life time of the heating element.
· Station is completed with 4 exchangeable tips with different diameter to ensure universal application of the equipment.
· Heating element type: metallic incandescent wire
· Compressor type: diaphragm pump
· Airstream: 23 l/min (max)
· Operating surface resistivity on the
· Light and handy hot air station handle.
· Digital indication of real and fixed temperature
· Operating temperature range of hot air station: 100 – 420C “case”: up to 2Ohm
· ”Case” – to – operating surface potential difference: up to 2mV
· Galvanic isolation
· Made from anti-static materials.
· Hot air station power – 350W
· Automatic retroactive temperature control, holding up of constant temperature, irrespective of airspeed.
· Automatic cooling system. After soldering station is switched off, the hot air station is cold aired falling up less then 50C. This option prevents casual burns and prolongs the life time of the heating element.
· Supply voltage of the station: 220-240V AC
· Power consumption: 300W
· Heating element power consumption: 250W
· Compressor power consumption: 20W
-
Attenuator
M/A-COM EUROTEC 2082-6042-10
RF Attenuator – Coaxial from XMA
Connectors SMA Male (Plug)/ SMA Female (Jack)
18 GHz, 500 W
The overall length of the XMA SMA Coaxial Attenuators are .86 inch for 3, 6 and 10 dB and 1.02 Inches for 20 and 30 dB.
The body is passivated stainless steel round body design with an operating temp range of -65c to +125c.
The maximum VSWR is < 1.15:1 @ DC-4GHz, <1.25:1 @ 4-12.3 GHz and <1.35 @ 12.4-18. Datasheet -
Base Station
MOTOROLA MTR2000 – BASE STATION, REPEATER AND RECEIVER
Motorola’s MTR 2000 Station/Repeater/Receiver is a continuous-duty analog base/repeater station for use on both conventional and trunking systems in the VHF, UHF, and 800 and 900 MHz bands.
Onboard self-testing and a microprocessor-based design keeps system up-time at a maximum.Provides Unmatched Flexibility in a Compact Design:
Analog operation in conventional systems
Analog operation in SMARTNET or SmartZone trunking systems
Software based design allows for future system applications
75-20 Watt variable power models 8 Compact dimensions, 3 rack units (5.25˝ or 13.3 cm), utilize expensive site space efficiently
12.5 or 25 kHz programmable channel spacing (800 MHz)
12.5 kHz channel spacing (900 MHz)
Contributes to Maximizing System Up-Time:Microprocessor based design with integrated DSP capability
Continuous duty cycle operation
Self testing monitors station performance
Switching power supply functions over a wide range of voltages and frequencies
Shortens Installation and Maintenance Time:Programming and diagnostic testing performed through a personal computer
Standard EIA 19˝ rack mount configuration
Lightweight (40 lbs/19 kg)
Functionally separate modules: Field Replaceable Units (FRU)
Software based design simplifies upgrades -
RF Vector Network Analyzer
R&S ZVB4 Vector Network Analyzer 4 ports, 4 GHz
R&S ZVB4 is Vector Network Analyzer 4 ports, eith frequency range: 300 kHz to 4 GHz
* Medium-class network analyzer featuring outstanding performance
* Overrange up to 150 kHz (unspecified and without calibration ex factory)
* Capable of balanced measurements (mixed-mode S-parameters)
* option ZVAB-B4: Oven Quartz (OCXO) > The R&S ZVA/ZVB/ZVT can optionally be equipped with a 10 MHz oven-controlled crystal oscillator (OCXO) to enhance the frequency accuracy of the internal generators.
* TOSM Calibration Kit ZV-Z21 -
-
Oscilloscope 4 channles
RIGOL924S
250 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, AFG function, Bode Plot, 7” touch display
Analog channel bandwidth: 250 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
Integrates the AFG function, bode plot analysis, histogram, digital signal analysis, and etc
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interface -
DC Electronic Load
Rigol DL3031
The Rigol DL3031 is a cost-effective programmable DC electronic load max. 150V, 60A, 350W. With USB Host, USB Device and RS232 interface. LAN is available as an option. with performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
-
Digital Multimeter
Rigol DM3068
The Rigol DM3068 is a high quality digital benchtop multimeter from the DM3060 series with a very high sampling rate of up to max. 10 kSa/s. The Rigol multimeter comes with very well designed and easy to use controls which also offer comprehensive ease-of-use functions for all measurement tasks. The menu structure is very intuitive to use. The device helps you obtain precise measurement results in a wide range of applications. The LCD with its 256×64 pixels is highly legible and provides a good overview of the many individual functions. It has a maximum resolution of 6½ digits (maximum display value 2.400.000). Delivery including 2 probes, USB cable, pc software, power cable, 2 replacement fuses and manual. Function Max. Reading 2.400.000 (6½ digits) LCD 90 mm × 25 mm (256x64Pixel) Sampling rate 10 kSa/s Memory Depth (volatile) 512k readings (History) Memory Depth (non volatile) 10 groups of 5000 readings 5 groups of 5000 readings (Sensordata) Connections RS-232, USB Device, USB Host, Ext.Trig., VM Comp, 10/100MBit LAN, GPIB Details Rigol DM3068 Digital Multimeter Power supply 230 V / 50 Hz / 110 V / 60 Hz mains connection Safety standard CAT II/600 V Dimensions 290.5 mm × 231.6 mm × 107.0 mm (11.44″ × 9.12″ × 4.21″) Weight without accessories / packaging 2500 g (5.512 lbs) Weight with accessories / packaging 4465 g (9.844 lbs) Warranty 3 years
6 1/2 digit true RMS precision table multimeter -
Power Supply
Rigol DP821A
The Rigol DP821A is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
Oscilloscope 4 channles
Rigol DS1054Z
The DS1000Z Series is the new economic level Digital Oscilloscope from Rigol to meet the customer's applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. The DS1000Z 4 channel oscilloscopes come in 70 or 100 MHz versions with a 7 inch display and Rigol's UltraVision technology as well as a host of options. Add the optional analysis, decoding, deep memory, and integrated 2 channel waveform generator for a powerful 4 channel scope at an exceptional price. 50MHz Bandwidth, 4 channels 1G Sa/s Real-time Sample Rate 12Mpts (Std.) and 24Mpts (Opt.) Memory Depth Innovative “UltraVision” technology Up to 30,000wfms/s Waveform Capture Rate 7 Inch WVGA (800×480), multiple intensity levels waveform display
50MHz, 4 channel, 1GS/s
Datasheet
-
Electronic Load Module, Lightwave Switch
HP-Agilent/Keysight 86060B
These electronic loads are particularly suited for the lab bench. Entering commands manually using the front panel keypad is simpler because the channel does not need to be specified, as in a mainframe configuration. Extensive protection is included to help protect your valuable prototypes under test. This includes overvoltage, over current, over temperature, overpower, and reverse polarity.
The Keysight 6060B is a 300 W, single output electronic load, ideal for evaluation of DC power sources and power components in bench applications. The 6060B has built-in measurement functions that make it convenient for testing single output applications in areas such as research and development, production, and incoming inspection.
The Keysight 6060B loads are suitable for manufacturing test systems where maximizing speed is not critical. They use industry standard SCPI instructions, and also have VXI Plug & Play drivers to simplify system design. For the greatest speed and accuracy in programming and measurement, see the DC Electronic Loads.
€650.00 View Product -
Power Sensor
HP-Agilent/Keysight 8481A
HP AGILENT KEYSIGHT 8481A POWER SENSOR 10 MHz to 18 GHz
The 8481A power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM series, EPM-P series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters.
The 8481A provides extraordinary accuracy, stability, and lower SWR.
• Excellent SWR for reducing mismatch uncertainty
• Accurate calibration and traceability to US National Institute of Standards and Technology (NIST)
• Compatible with EPM, EPM-P and P-series power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
• Accurate average power measurements over -30 to +20 dBm
• Frequency range 10 MHz to 18 GHz
• Thermocouple power sensing element
• Measurement range: 1 µW to 100 mW ( -30 dBm to +20 dBm)
• 50 ohm impedance
• N (m) connector -
Scalar Network Analyzer
HP-Agilent/Keysight 8757A
Measure insertion loss or gain, return loss, SWR, power quickly and accurately with the new HP 8757A Scalar Network Analyzer. With high perforamance detectors and directional bridges and a companion HP source and digital plotter, the HP 8757A becomes the basis of a complete measurement system with superb performance.
-76 dB dynamic range
– Accurate swept power measurement (dBm)
– 40 dB directivity bridges
-Four independant display channels
-Limit testing built in
– Save/recall setup and cal data
-Direct plotter output
Datasheet -
Network Analyzer
HP/Agilent-Keysight 8753D
The HP 8753D is a vector network analyzer and it offers even more flexibility and measurement capability than the HP 8752C in the following areas:
* Frequency range from 30 kHz to 3 GHz.
* Built-in S-parameter test set provides complete forward and reverse measurements, allowing you to completely characterize your component with a single connection.
* 50 and 75 ohm solutions.
* Superb accuracy. The most comprehensive calibration available guarantees accurate measurements. TRL**nRMt makes calibration in non-coaxial environments easier and more convenient.
* Mixer testing. Quickly and easily characterize frequency translating devices such as mixers.
* Add swept harmonic measurements. Characterize amplifter parameters – gain, 1 dB compression, match – and 2nd and 3rd harmonic distortion with the same test setup.
* Built-in 3.5 inch floppy disk drive provides convenient storage of instrument states and data.
* Parallel and serial ports provide interfaces to popular printers and plotters. The parallel port can also be used as a general U0 bus, with user-controllable TI'L inputs and outputs. Users can also connect a DIN keyboard to speed up entry of titles, labels, or file names, and for remote hnt panel operation.Two excellent choices, the HP 8752C and HP 8753D continue the tradition of affordable excellence in RF component measurements for the lab and production test areas. The HP 8752C and HP 8753D network analyzers bring superior performance and useful productivity features to simplify and speed your device, component, or network measurements in the 30 kHz to 6 GHz frequency range. A swept synthesized source, sensitive receiver, and crisp color display ensure rapid, accurate, and easy-to-read test results. Since the HP 8752C and HP 8753D are vector network analyzers, they not only provide magnitude and phase information, but also offer up to 1 10 dB dynamic range, make group delay and time domain measurements, and utilize vector accuracy enhancement to minimize measurement uncertainty.
Datasheet -
Frequency Counter
HP/Agilent-Keysight 53131A
The two-channel 53131A counter offers 10 digits per second of frequency/period resolution and a bandwidth of 225 MHz. Time interval resolution is specified at 500 ps. An optional third channel provides frequency measurements up to 3, 5, or 12.4 GHz. Standard measurements include frequency, period, ratio, time interval, pulse width, rise/fall time, phase angle, duty cycle, totalize, and peak voltage.
Two 225 MHz input channels, plus optional third channel up to 12.4 GHz
10 digits per second, 500 ps time interval resolution
GPIB Standard
option 010 > Optional High Stability Timebase with Oven and Electronic Calibration
option 030 > 100 MHz to 3 GHzThe Keysight Technologies, Inc. 53131A/132A/181A high-performance counters give you fast, precise frequency measurements at an affordable price. These counters feature an intuitive user interface and one-button access to frequently used functions so you can make accurate measurements quickly and easily. Real-time digital signal processing technology is used to analyze data while simultaneously taking new readings, speeding measurement throughput. The technology, developed for Keysight’s high-end line of modulation domain analyzers, allows the counters to gather more data for each measurement, so you get higher-resolution measurements in a fraction of the time it takes other counters. The 53131A/132A/181A counters offer built-in statistics and math functions so you can scale measurements and simultaneously measure and track average, min/max and standard deviation. Automated limit testing lets you set upper and lower limits for any measurement. An analog display mode lets you see at a glance whether a measurement is within pass/fail limits. The counters flag out-of-limit conditions and can generate an output signal to trigger external devices when a limit is exceeded. For quick access to frequently used tests, a single keystroke recalls up to 20 different stored front-panel set-ups. For computer-controlled systems applications, each counter includes a standard GPIB interface with full SCPI-compatible programmability and a data transfer rate of up to 200 fully formatted measurements per second. The standard RS-232 talk-only interface provides printer support or data transfer to a computer through a terminal-emulation program.
Datasheet -
Senza categoria
LUKEY 850D SMD REWORK STATION – HOT AIR SOLDERING STATION
Lukey 850D is a hot air single-channel soldering/desoldering station for working with SMD, QFP, PLCC, SOP, SOIC, CHIP, BGA components.
· Ultra-fast heating up to the required temperature.
· Temperature and blast control of the hot air station.
· Temperature control of the air stream by means of digital display and microprocessor system using “UP” and “DOWN” buttons with +/- 1C accuracy.
· Set automatic interrupting time at 30, 60 minutes and permanently (Sleep Timer) to prolong life time of the heating element.
· Station is completed with 4 exchangeable tips with different diameter to ensure universal application of the equipment.
· Heating element type: metallic incandescent wire
· Compressor type: diaphragm pump
· Airstream: 23 l/min (max)
· Operating surface resistivity on the
· Light and handy hot air station handle.
· Digital indication of real and fixed temperature
· Operating temperature range of hot air station: 100 – 420C “case”: up to 2Ohm
· ”Case” – to – operating surface potential difference: up to 2mV
· Galvanic isolation
· Made from anti-static materials.
· Hot air station power – 350W
· Automatic retroactive temperature control, holding up of constant temperature, irrespective of airspeed.
· Automatic cooling system. After soldering station is switched off, the hot air station is cold aired falling up less then 50C. This option prevents casual burns and prolongs the life time of the heating element.
· Supply voltage of the station: 220-240V AC
· Power consumption: 300W
· Heating element power consumption: 250W
· Compressor power consumption: 20W
-
Attenuator
M/A-COM EUROTEC 2082-6042-10
RF Attenuator – Coaxial from XMA
Connectors SMA Male (Plug)/ SMA Female (Jack)
18 GHz, 500 W
The overall length of the XMA SMA Coaxial Attenuators are .86 inch for 3, 6 and 10 dB and 1.02 Inches for 20 and 30 dB.
The body is passivated stainless steel round body design with an operating temp range of -65c to +125c.
The maximum VSWR is < 1.15:1 @ DC-4GHz, <1.25:1 @ 4-12.3 GHz and <1.35 @ 12.4-18. Datasheet -
Base Station
MOTOROLA MTR2000 – BASE STATION, REPEATER AND RECEIVER
Motorola’s MTR 2000 Station/Repeater/Receiver is a continuous-duty analog base/repeater station for use on both conventional and trunking systems in the VHF, UHF, and 800 and 900 MHz bands.
Onboard self-testing and a microprocessor-based design keeps system up-time at a maximum.Provides Unmatched Flexibility in a Compact Design:
Analog operation in conventional systems
Analog operation in SMARTNET or SmartZone trunking systems
Software based design allows for future system applications
75-20 Watt variable power models 8 Compact dimensions, 3 rack units (5.25˝ or 13.3 cm), utilize expensive site space efficiently
12.5 or 25 kHz programmable channel spacing (800 MHz)
12.5 kHz channel spacing (900 MHz)
Contributes to Maximizing System Up-Time:Microprocessor based design with integrated DSP capability
Continuous duty cycle operation
Self testing monitors station performance
Switching power supply functions over a wide range of voltages and frequencies
Shortens Installation and Maintenance Time:Programming and diagnostic testing performed through a personal computer
Standard EIA 19˝ rack mount configuration
Lightweight (40 lbs/19 kg)
Functionally separate modules: Field Replaceable Units (FRU)
Software based design simplifies upgrades -
RF Vector Network Analyzer
R&S ZVB4 Vector Network Analyzer 4 ports, 4 GHz
R&S ZVB4 is Vector Network Analyzer 4 ports, eith frequency range: 300 kHz to 4 GHz
* Medium-class network analyzer featuring outstanding performance
* Overrange up to 150 kHz (unspecified and without calibration ex factory)
* Capable of balanced measurements (mixed-mode S-parameters)
* option ZVAB-B4: Oven Quartz (OCXO) > The R&S ZVA/ZVB/ZVT can optionally be equipped with a 10 MHz oven-controlled crystal oscillator (OCXO) to enhance the frequency accuracy of the internal generators.
* TOSM Calibration Kit ZV-Z21 -
€3,295.00 View Product
-
Oscilloscope 4 channles
RIGOL924S
250 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, AFG function, Bode Plot, 7” touch display
Analog channel bandwidth: 250 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
Integrates the AFG function, bode plot analysis, histogram, digital signal analysis, and etc
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interface€790.00 View Product -
DC Electronic Load
Rigol DL3031
The Rigol DL3031 is a cost-effective programmable DC electronic load max. 150V, 60A, 350W. With USB Host, USB Device and RS232 interface. LAN is available as an option. with performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
€959.00 View Product -
Digital Multimeter
Rigol DM3068
The Rigol DM3068 is a high quality digital benchtop multimeter from the DM3060 series with a very high sampling rate of up to max. 10 kSa/s. The Rigol multimeter comes with very well designed and easy to use controls which also offer comprehensive ease-of-use functions for all measurement tasks. The menu structure is very intuitive to use. The device helps you obtain precise measurement results in a wide range of applications. The LCD with its 256×64 pixels is highly legible and provides a good overview of the many individual functions. It has a maximum resolution of 6½ digits (maximum display value 2.400.000). Delivery including 2 probes, USB cable, pc software, power cable, 2 replacement fuses and manual. Function Max. Reading 2.400.000 (6½ digits) LCD 90 mm × 25 mm (256x64Pixel) Sampling rate 10 kSa/s Memory Depth (volatile) 512k readings (History) Memory Depth (non volatile) 10 groups of 5000 readings 5 groups of 5000 readings (Sensordata) Connections RS-232, USB Device, USB Host, Ext.Trig., VM Comp, 10/100MBit LAN, GPIB Details Rigol DM3068 Digital Multimeter Power supply 230 V / 50 Hz / 110 V / 60 Hz mains connection Safety standard CAT II/600 V Dimensions 290.5 mm × 231.6 mm × 107.0 mm (11.44″ × 9.12″ × 4.21″) Weight without accessories / packaging 2500 g (5.512 lbs) Weight with accessories / packaging 4465 g (9.844 lbs) Warranty 3 years
6 1/2 digit true RMS precision table multimeter€695.00 View Product -
Power Supply
Rigol DP821A
The Rigol DP821A is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€647.00 View Product -
Oscilloscope 4 channles
Rigol DS1054Z
The DS1000Z Series is the new economic level Digital Oscilloscope from Rigol to meet the customer's applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. The DS1000Z 4 channel oscilloscopes come in 70 or 100 MHz versions with a 7 inch display and Rigol's UltraVision technology as well as a host of options. Add the optional analysis, decoding, deep memory, and integrated 2 channel waveform generator for a powerful 4 channel scope at an exceptional price. 50MHz Bandwidth, 4 channels 1G Sa/s Real-time Sample Rate 12Mpts (Std.) and 24Mpts (Opt.) Memory Depth Innovative “UltraVision” technology Up to 30,000wfms/s Waveform Capture Rate 7 Inch WVGA (800×480), multiple intensity levels waveform display
50MHz, 4 channel, 1GS/s
Datasheet€335.00 View Product