ItalianoShop
Showing 181–210 of 1499 results
-
Signal Generator
ANRITSU 69037B
The Anritsu 69037B is a used Synthesized CW Signal Generator. The Anritsu 69037B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. The 69037B offers the highest performance available on the market. The Anritsu 69037B is the leader in lowest phase noise performance.The 68C/69B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. It offers the highest performance available on the market. It is the leader in lowest phase noise performance.
The Anritsu 69037B is a basic signal source that provides accurate outputs over a wide frequency and power range for Local Oscillator duty and other CW applications.Additional Features:
Frequency range: 2 to 20 GHz
Output power without an attenuator: –15 dBm (–20 dBm typical)
Output power with an attenuator: –120 dBm
Output power with an electronic attenuator: –140 dBm
Ultra-low SSB phase noise and spurious
+17 dBm guaranteed leveled power to 20 GHz
<5 ms switching time for <100 MHz sweep steps Digital frequency sweep and digital power sweep Wide dynamic range with accurate output levels Intuitive, menu-driven front panel DatasheetSKU: n/a -
Power Meter
ANRITSU MA2437A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
DatasheetSKU: n/a -
Power Sensor
ANRITSU MA2472A
Anritsu MA2472A Power Sensor, 10 MHz to 18 GHz, -70 dBm to +20 dBm
The Anritsu MA2472A is a Standard Diode Sensor designed for use with the ML2430, ML2480 and ML2490 series power meters. They are designed for high dynamic range, high accuracy CW and TDMA measurements. These power sensors have 90 dB dynamic range and linearity better than 1.8% making them the choice for precision measurements. The 4 µs rise time of these sensors is fast enough for power measurements on GSM and similar TDMA systems that use GMSK modulation.
Features:Frequency Range: 10 MHz to 18 GHz
Dynamic Range: -70 to +20 dBm
Rise Time: <0.004 ms Sensor linearity: 1.8%, <18 GHz Temperature accuracy (5 to 50 degrees C.): <1.0% RF connector: N(m) Shipping weight: 2 lb; Size: 73 mm x 52 mm x 29 mm DatasheetSKU: n/a -
Power Meter, Power Sensor
ANRITSU ML2437A + ANRITSU MA2473A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
The MA2473A is a used 32 GHz 0.1 Watt RF Sensor from Anritsu. Electronic test equipment sensors measure the power of waveforms, such as multi-tone and modulated radiofrequency (RF) waveforms. Sensors gather highly accurate modulation measurements using diode detectors.
Additional Features:Frequency Range 10 MHz – 32 GHz
Dynamic Range -70 to +20
SWR <1.90; 10 - 50 MHz,<1.17; 50 - 150 MHz,<1.12; 0.15 - 2 GHz,<1.22; 2 - 12.4 GHz,<1.25; 12.4 - 18 GHz, <1.35; 18 - 32 GHz,<1.50; 32 - 40 GHz,<1.63; 40 - 50 GHz RF Connector Type K (m) Sensor linearity 1.8%, <18 GHz 2.5%, <40 GHz 3.5%, <50 GHz Rise time-1(ms) <0.004 DatasheetSKU: n/a -
OPTICAL SPECTRUM ANALYZER
ANRITSU MS9710C
The MS9710C is a diffraction-grating spectrum analyzer for analyzing optical spectra in the 600 to 1750 nm wavelength band. In addition to uses such as measurement of LD and LED spectra, it has functions for measuring the transmission characteristics of passive elements such as optical isolators, as well as NF/Gain of optical fiber amplifier systems. In addition to its basic features, the superior stability and reliability of the diffraction grating (patent pending) offer the severe level and wavelength specifications particularly in the WDM band. This analyzer has the dynamic range, reception sensitivity and sweep speed requested by users, backed by Anritsu’s highlevel technology. The high sensitivity meets the exacting demands placed on today’s measuring instruments. In particular, the excellent wavelength and level specifications fully meet the dense WDM requirements (1520 to 1620 nm). The MS9710C Optical Spectrum Analyzer is the successor to the popular MS9710B but with improved functions and higher performance. The specifications have been upgraded for the important 1.55 µm band for WDM communications and have also been optimised to include the new requirements for the L-band (1570 to 1620 nm) use. In addition to the high reliability and excellent basic performance, this analyzer has a full range of application functions to support accurate measurement in the fastest possible time.
SKU: 478 -
Antenna Analyzer
ANRITSU S331D
Site Master Handheld Cable and Antenna Analyzer Model S331D covers the 25 MHz to 4000 MHz spectrum. The S331D is designed for installing, provisioning, maintaining, and troubleshooting wireless base station cable and antenna systems.
Features:
Range di Frequenza: 25 MHz to 4 GHz
Misure: Return Loss / VSWR, Cable Loss, Distance-To-Fault (DTF), Optical DTF
Velocità Sweep: 2.5 msec / data point
Accuratezza: > 42 dB corrected directivity
Display: TFT a colori con retro illuminazione regolabile
Calibrazione: OSL, InstaCal, e FlexCal
RF Immunity: Performs accurate measurements in co-located cell sites
Signal Standard List / Cable Standard List: Quickly locates commonly used cables and frequency standards
Trace Overlay: Monitors changes with reference traces over time
Limit Lines: Single and Segmented Limit lines
Lingue supportate: Chinese, English, French, German, Japanese, Spanish
Handheld Software Tools: Downloads traces, creates reports, compares traces, and renames files
DatasheetSKU: 479 -
BIRD SA-2500A
Easy-To-Use Cable & Antenna Tester with Digital Power Meter Option.
Bird's Site Analyzer is the user-friendly test solution for installing maintaining and troubleshooting your antenna and cable systems. Field engineers and technicians rely on this rugged handheld tool to get the job done. Wireless equipment manufacturers service providers and contractors worldwide approve of the analyzers precision VSWR and Return Loss results. This versatile unit also includes a Digital Power Meter option to accurately measure the output power of your base station.Features:
Easy operation for first-time, occasional or experienced users
Digital Power meter option compatible with Bird power sensors
Accurate and repeatable measurements
Immunity to on-channel interference (+13 dBm) for testing at co-located antenna sites
High-resolution color display
Fast sweep rate
On-screen comparison of live sweep and recalled trace
Unlimited trace overlays per report to compare antennas and track performance over time
DatasheetSKU: n/a -
ECONOLAD COAXIAL RESISTOR
BIRD TERMALINE 8745
20 kW, Water-Cooled Terminations
Termaline Series RF Coaxial Terminations
The 8740 Econoload Series water-cooled load resistors are designed as compact, low VSWR and non-radiating terminations for high-power transmitter/transmission line systems. The units generate almost no ambient heat, making installation space minimal and convenient, in any position. The RF power is converted to heat in the hollow resistive film load resistor and directly absorbed by the water flowing through it.Broadband water-cooled load for long-term RF dissipation when heat must be efficiently transferred away from the area
Small size may be carried easily, used in any position and installed anywhere there is a source of potable water
Requires flow rate of up to 8 gallons (30.4 liters) per minuteSKU: n/a -
ECONOLAD COAXIAL RESISTOR
BIRD TERMALINE 8765
Load, Water Cooled 40kW .
Designed as a compact, low VSWR and non-radiating termination
Used with high-power transmitter and transmission line systems
Power Rating: 40kW Continuous
Frequency Range: 1kHz – 900 MHz
Connector: 3-1/8 EIA Flanged
VSWR: 1.10 (max)
Coolant: potable water
3-1/8 EIA Flange allows termination of full 40 kW up to 900 MHz
Requires flow rate of up to 10 gallons (38 liters) per minuteSKU: n/a -
Digital Multimeter
BK PRECISION 2831E
The 2831E multimeter is capable of performing typical measurements such as volts, ohms, and amperes with high precision, stability, and a VDC base accuracy of 0.03%. This meter can also measure frequency, period, continuity, and perform diode tests. Readings can be taken at a maximum rate of 25 readings/sec at a selectable rate of slow, medium, and fast.
Display resolution: 20,000 counts
Dual display for simultaneous viewing of two readings
True RMS AC + DC
AC voltage and current measurement over a wide frequency range
Limit mode for pass/fail testing
Built-in math functions: Rel, Max/Min, dBm, dB, %, Hold, Compare
CATI (1000V)/CATII (300V) protection
USB interface (Virtual COM)
SCPI compatibleSKU: n/a -
Power Supply
BK PRECISION 9111
Models 9110 and 9111 are a new type of power supply. Unlike conventional power supplies with fixed output ratings, they automatically recalculate voltage and current limits for each setting, providing any Volt/Amp combination within the rated power. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required and free up valuable bench space.
Output rating up to 180 W within 60 V/ 8 A (model 9111) or 100 W within 60 V/ 5 A (model 9110)
Digitally controlled, multi-ranging output
10mV/1mA resolution over the full range
Bright, easy to read display
Very compact and lightweight
Low ripple and noise
OCP, OVP and OTP protection
Output On/Off control
Store and Recall 4 x 100 groups of preset Volt/Amp valuesSKU: n/a -
HANDLED RECORDER
BK PRECISION DAS30
The DAS 30/50/60 high-speed multi-function data acquisition recorders feature versatile channel configurability, high-speed sampling (1 MSa/s), a wide input range (±5 mV to ±500 V), large internal solid-state memory of up to 64 GB, and 9.5 hours of battery life. Combined with the CAT III isolation rating, these multifunction data acquisition systems are well suited for a wide variety of applications including maintenance and electrical power analysis.
Each channel can record a different measurement type such as voltage, temperature (thermocouple or RTD), current or frequency simultaneously, using a common time base. The 10-inch touchscreen features unlimited data scrolling, zoom in/out function as well as drag and drop delta cursors for precision measurements.
SKU: n/a -
MULTI-CHANNEL RECORD
BK PRECISION SEFRAM DAS220BAT
The DAS240 series is ideal for measuring parameters commonly found in process applications including voltage, temperature (thermocouple and RTD), current, resistance, frequency and pulse. These multi-channel data loggers provide 20 universal analog channels with convenient screw input terminals that can be expanded up to 200 channels. The DAS240-BAT includes a built-in battery for up to 15 hours of autonomous operation.
Measurement results can be viewed graphically and numerically on a 10-inch color touch screen and saved to internal solid-state memory or transferred to an external USB memory stick. Icon-driven menus make the DAS240 easy to navigate. The free Windows PC software allows users to remotely control and configure the recorder, transfer logging results and configuration files, and view live data in graphical or numerical format on a connected PC.
B&K Precision data loggers and data acquisition recorders are designed and manufactured in France. Support services are provided through service centers around the world.
Features and benefits:
Compact and portable form factor suitable for remote and field use
Extended battery life of up to 15 hours (-BAT only)
Wide 10” touchscreen TFT display
20 universal analog input channels, expandable to 200 channels
Versatile temperature measurements supporting 9 types of thermocouples and 2 or 3-wire Pt100 / Pt1000 temperature sensors
DC Voltage ranges from ±0.5 mV to ±100 V
Measure voltage to ±100 V, resistance to 10 kOhm and current (with optional shunt input-terminal block)
16-bit vertical resolution
32 GB internal solid-state memory
WiFi monitoring and control (standard USB WiFi dongle required)
2 USB Host ports and 1 LAN interfaceSKU: n/a -
Power Meter, Power Sensor
BOONTON 4232A + 51011-4B
The 4230A series is compatible with every Boonton diode, thermocouple, and waveguide sensor you’re like to have, from 10 kHz to 100 GHz. Any sensor can be upgraded with a sensor data adapter to automatically download sensor information to the instrument. The 4230A series integrates smoothly with ATE systems, via its standard IEEE-488 or optional RS-232 interfaces. Available LabVIEW software drivers unleash the power of the PC for data analysis and reporting, and allow the 4230A series to integrate smoothly with other instruments into an ATE system. Emulation of HP437, 438, and 4220A is standard
The Boonton 51011 .
Boonton 51011(4B) Features:
50 Ohm Input Impedance
Type N (M) RF Connector
Frequency Range 100 kHz to 12.4 GHz
Dynamic Range -60 dBm to +20 dBm
Overload Rating 300 mW
DatasheetSKU: n/a
-
Signal Generator
ANRITSU 69037B
The Anritsu 69037B is a used Synthesized CW Signal Generator. The Anritsu 69037B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. The 69037B offers the highest performance available on the market. The Anritsu 69037B is the leader in lowest phase noise performance.The 68C/69B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. It offers the highest performance available on the market. It is the leader in lowest phase noise performance.
The Anritsu 69037B is a basic signal source that provides accurate outputs over a wide frequency and power range for Local Oscillator duty and other CW applications.Additional Features:
Frequency range: 2 to 20 GHz
Output power without an attenuator: –15 dBm (–20 dBm typical)
Output power with an attenuator: –120 dBm
Output power with an electronic attenuator: –140 dBm
Ultra-low SSB phase noise and spurious
+17 dBm guaranteed leveled power to 20 GHz
<5 ms switching time for <100 MHz sweep steps Digital frequency sweep and digital power sweep Wide dynamic range with accurate output levels Intuitive, menu-driven front panel Datasheet -
Power Meter
ANRITSU MA2437A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
Datasheet -
Power Sensor
ANRITSU MA2472A
Anritsu MA2472A Power Sensor, 10 MHz to 18 GHz, -70 dBm to +20 dBm
The Anritsu MA2472A is a Standard Diode Sensor designed for use with the ML2430, ML2480 and ML2490 series power meters. They are designed for high dynamic range, high accuracy CW and TDMA measurements. These power sensors have 90 dB dynamic range and linearity better than 1.8% making them the choice for precision measurements. The 4 µs rise time of these sensors is fast enough for power measurements on GSM and similar TDMA systems that use GMSK modulation.
Features:Frequency Range: 10 MHz to 18 GHz
Dynamic Range: -70 to +20 dBm
Rise Time: <0.004 ms Sensor linearity: 1.8%, <18 GHz Temperature accuracy (5 to 50 degrees C.): <1.0% RF connector: N(m) Shipping weight: 2 lb; Size: 73 mm x 52 mm x 29 mm Datasheet -
Power Meter, Power Sensor
ANRITSU ML2437A + ANRITSU MA2473A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
The MA2473A is a used 32 GHz 0.1 Watt RF Sensor from Anritsu. Electronic test equipment sensors measure the power of waveforms, such as multi-tone and modulated radiofrequency (RF) waveforms. Sensors gather highly accurate modulation measurements using diode detectors.
Additional Features:Frequency Range 10 MHz – 32 GHz
Dynamic Range -70 to +20
SWR <1.90; 10 - 50 MHz,<1.17; 50 - 150 MHz,<1.12; 0.15 - 2 GHz,<1.22; 2 - 12.4 GHz,<1.25; 12.4 - 18 GHz, <1.35; 18 - 32 GHz,<1.50; 32 - 40 GHz,<1.63; 40 - 50 GHz RF Connector Type K (m) Sensor linearity 1.8%, <18 GHz 2.5%, <40 GHz 3.5%, <50 GHz Rise time-1(ms) <0.004 Datasheet -
OPTICAL SPECTRUM ANALYZER
ANRITSU MS9710C
The MS9710C is a diffraction-grating spectrum analyzer for analyzing optical spectra in the 600 to 1750 nm wavelength band. In addition to uses such as measurement of LD and LED spectra, it has functions for measuring the transmission characteristics of passive elements such as optical isolators, as well as NF/Gain of optical fiber amplifier systems. In addition to its basic features, the superior stability and reliability of the diffraction grating (patent pending) offer the severe level and wavelength specifications particularly in the WDM band. This analyzer has the dynamic range, reception sensitivity and sweep speed requested by users, backed by Anritsu’s highlevel technology. The high sensitivity meets the exacting demands placed on today’s measuring instruments. In particular, the excellent wavelength and level specifications fully meet the dense WDM requirements (1520 to 1620 nm). The MS9710C Optical Spectrum Analyzer is the successor to the popular MS9710B but with improved functions and higher performance. The specifications have been upgraded for the important 1.55 µm band for WDM communications and have also been optimised to include the new requirements for the L-band (1570 to 1620 nm) use. In addition to the high reliability and excellent basic performance, this analyzer has a full range of application functions to support accurate measurement in the fastest possible time.
-
Antenna Analyzer
ANRITSU S331D
Site Master Handheld Cable and Antenna Analyzer Model S331D covers the 25 MHz to 4000 MHz spectrum. The S331D is designed for installing, provisioning, maintaining, and troubleshooting wireless base station cable and antenna systems.
Features:
Range di Frequenza: 25 MHz to 4 GHz
Misure: Return Loss / VSWR, Cable Loss, Distance-To-Fault (DTF), Optical DTF
Velocità Sweep: 2.5 msec / data point
Accuratezza: > 42 dB corrected directivity
Display: TFT a colori con retro illuminazione regolabile
Calibrazione: OSL, InstaCal, e FlexCal
RF Immunity: Performs accurate measurements in co-located cell sites
Signal Standard List / Cable Standard List: Quickly locates commonly used cables and frequency standards
Trace Overlay: Monitors changes with reference traces over time
Limit Lines: Single and Segmented Limit lines
Lingue supportate: Chinese, English, French, German, Japanese, Spanish
Handheld Software Tools: Downloads traces, creates reports, compares traces, and renames files
Datasheet -
BIRD SA-2500A
Easy-To-Use Cable & Antenna Tester with Digital Power Meter Option.
Bird's Site Analyzer is the user-friendly test solution for installing maintaining and troubleshooting your antenna and cable systems. Field engineers and technicians rely on this rugged handheld tool to get the job done. Wireless equipment manufacturers service providers and contractors worldwide approve of the analyzers precision VSWR and Return Loss results. This versatile unit also includes a Digital Power Meter option to accurately measure the output power of your base station.Features:
Easy operation for first-time, occasional or experienced users
Digital Power meter option compatible with Bird power sensors
Accurate and repeatable measurements
Immunity to on-channel interference (+13 dBm) for testing at co-located antenna sites
High-resolution color display
Fast sweep rate
On-screen comparison of live sweep and recalled trace
Unlimited trace overlays per report to compare antennas and track performance over time
Datasheet -
ECONOLAD COAXIAL RESISTOR
BIRD TERMALINE 8745
20 kW, Water-Cooled Terminations
Termaline Series RF Coaxial Terminations
The 8740 Econoload Series water-cooled load resistors are designed as compact, low VSWR and non-radiating terminations for high-power transmitter/transmission line systems. The units generate almost no ambient heat, making installation space minimal and convenient, in any position. The RF power is converted to heat in the hollow resistive film load resistor and directly absorbed by the water flowing through it.Broadband water-cooled load for long-term RF dissipation when heat must be efficiently transferred away from the area
Small size may be carried easily, used in any position and installed anywhere there is a source of potable water
Requires flow rate of up to 8 gallons (30.4 liters) per minute -
ECONOLAD COAXIAL RESISTOR
BIRD TERMALINE 8765
Load, Water Cooled 40kW .
Designed as a compact, low VSWR and non-radiating termination
Used with high-power transmitter and transmission line systems
Power Rating: 40kW Continuous
Frequency Range: 1kHz – 900 MHz
Connector: 3-1/8 EIA Flanged
VSWR: 1.10 (max)
Coolant: potable water
3-1/8 EIA Flange allows termination of full 40 kW up to 900 MHz
Requires flow rate of up to 10 gallons (38 liters) per minute -
Digital Multimeter
BK PRECISION 2831E
The 2831E multimeter is capable of performing typical measurements such as volts, ohms, and amperes with high precision, stability, and a VDC base accuracy of 0.03%. This meter can also measure frequency, period, continuity, and perform diode tests. Readings can be taken at a maximum rate of 25 readings/sec at a selectable rate of slow, medium, and fast.
Display resolution: 20,000 counts
Dual display for simultaneous viewing of two readings
True RMS AC + DC
AC voltage and current measurement over a wide frequency range
Limit mode for pass/fail testing
Built-in math functions: Rel, Max/Min, dBm, dB, %, Hold, Compare
CATI (1000V)/CATII (300V) protection
USB interface (Virtual COM)
SCPI compatible -
Power Supply
BK PRECISION 9111
Models 9110 and 9111 are a new type of power supply. Unlike conventional power supplies with fixed output ratings, they automatically recalculate voltage and current limits for each setting, providing any Volt/Amp combination within the rated power. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required and free up valuable bench space.
Output rating up to 180 W within 60 V/ 8 A (model 9111) or 100 W within 60 V/ 5 A (model 9110)
Digitally controlled, multi-ranging output
10mV/1mA resolution over the full range
Bright, easy to read display
Very compact and lightweight
Low ripple and noise
OCP, OVP and OTP protection
Output On/Off control
Store and Recall 4 x 100 groups of preset Volt/Amp values -
HANDLED RECORDER
BK PRECISION DAS30
The DAS 30/50/60 high-speed multi-function data acquisition recorders feature versatile channel configurability, high-speed sampling (1 MSa/s), a wide input range (±5 mV to ±500 V), large internal solid-state memory of up to 64 GB, and 9.5 hours of battery life. Combined with the CAT III isolation rating, these multifunction data acquisition systems are well suited for a wide variety of applications including maintenance and electrical power analysis.
Each channel can record a different measurement type such as voltage, temperature (thermocouple or RTD), current or frequency simultaneously, using a common time base. The 10-inch touchscreen features unlimited data scrolling, zoom in/out function as well as drag and drop delta cursors for precision measurements.
-
MULTI-CHANNEL RECORD
BK PRECISION SEFRAM DAS220BAT
The DAS240 series is ideal for measuring parameters commonly found in process applications including voltage, temperature (thermocouple and RTD), current, resistance, frequency and pulse. These multi-channel data loggers provide 20 universal analog channels with convenient screw input terminals that can be expanded up to 200 channels. The DAS240-BAT includes a built-in battery for up to 15 hours of autonomous operation.
Measurement results can be viewed graphically and numerically on a 10-inch color touch screen and saved to internal solid-state memory or transferred to an external USB memory stick. Icon-driven menus make the DAS240 easy to navigate. The free Windows PC software allows users to remotely control and configure the recorder, transfer logging results and configuration files, and view live data in graphical or numerical format on a connected PC.
B&K Precision data loggers and data acquisition recorders are designed and manufactured in France. Support services are provided through service centers around the world.
Features and benefits:
Compact and portable form factor suitable for remote and field use
Extended battery life of up to 15 hours (-BAT only)
Wide 10” touchscreen TFT display
20 universal analog input channels, expandable to 200 channels
Versatile temperature measurements supporting 9 types of thermocouples and 2 or 3-wire Pt100 / Pt1000 temperature sensors
DC Voltage ranges from ±0.5 mV to ±100 V
Measure voltage to ±100 V, resistance to 10 kOhm and current (with optional shunt input-terminal block)
16-bit vertical resolution
32 GB internal solid-state memory
WiFi monitoring and control (standard USB WiFi dongle required)
2 USB Host ports and 1 LAN interface -
Power Meter, Power Sensor
BOONTON 4232A + 51011-4B
The 4230A series is compatible with every Boonton diode, thermocouple, and waveguide sensor you’re like to have, from 10 kHz to 100 GHz. Any sensor can be upgraded with a sensor data adapter to automatically download sensor information to the instrument. The 4230A series integrates smoothly with ATE systems, via its standard IEEE-488 or optional RS-232 interfaces. Available LabVIEW software drivers unleash the power of the PC for data analysis and reporting, and allow the 4230A series to integrate smoothly with other instruments into an ATE system. Emulation of HP437, 438, and 4220A is standard
The Boonton 51011 .
Boonton 51011(4B) Features:
50 Ohm Input Impedance
Type N (M) RF Connector
Frequency Range 100 kHz to 12.4 GHz
Dynamic Range -60 dBm to +20 dBm
Overload Rating 300 mW
Datasheet
-
Signal Generator
ANRITSU 69037B
The Anritsu 69037B is a used Synthesized CW Signal Generator. The Anritsu 69037B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. The 69037B offers the highest performance available on the market. The Anritsu 69037B is the leader in lowest phase noise performance.The 68C/69B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. It offers the highest performance available on the market. It is the leader in lowest phase noise performance.
The Anritsu 69037B is a basic signal source that provides accurate outputs over a wide frequency and power range for Local Oscillator duty and other CW applications.Additional Features:
Frequency range: 2 to 20 GHz
Output power without an attenuator: –15 dBm (–20 dBm typical)
Output power with an attenuator: –120 dBm
Output power with an electronic attenuator: –140 dBm
Ultra-low SSB phase noise and spurious
+17 dBm guaranteed leveled power to 20 GHz
<5 ms switching time for <100 MHz sweep steps Digital frequency sweep and digital power sweep Wide dynamic range with accurate output levels Intuitive, menu-driven front panel Datasheet -
Power Meter
ANRITSU MA2437A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
Datasheet -
Power Sensor
ANRITSU MA2472A
Anritsu MA2472A Power Sensor, 10 MHz to 18 GHz, -70 dBm to +20 dBm
The Anritsu MA2472A is a Standard Diode Sensor designed for use with the ML2430, ML2480 and ML2490 series power meters. They are designed for high dynamic range, high accuracy CW and TDMA measurements. These power sensors have 90 dB dynamic range and linearity better than 1.8% making them the choice for precision measurements. The 4 µs rise time of these sensors is fast enough for power measurements on GSM and similar TDMA systems that use GMSK modulation.
Features:Frequency Range: 10 MHz to 18 GHz
Dynamic Range: -70 to +20 dBm
Rise Time: <0.004 ms Sensor linearity: 1.8%, <18 GHz Temperature accuracy (5 to 50 degrees C.): <1.0% RF connector: N(m) Shipping weight: 2 lb; Size: 73 mm x 52 mm x 29 mm Datasheet -
Power Meter, Power Sensor
ANRITSU ML2437A + ANRITSU MA2473A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
The MA2473A is a used 32 GHz 0.1 Watt RF Sensor from Anritsu. Electronic test equipment sensors measure the power of waveforms, such as multi-tone and modulated radiofrequency (RF) waveforms. Sensors gather highly accurate modulation measurements using diode detectors.
Additional Features:Frequency Range 10 MHz – 32 GHz
Dynamic Range -70 to +20
SWR <1.90; 10 - 50 MHz,<1.17; 50 - 150 MHz,<1.12; 0.15 - 2 GHz,<1.22; 2 - 12.4 GHz,<1.25; 12.4 - 18 GHz, <1.35; 18 - 32 GHz,<1.50; 32 - 40 GHz,<1.63; 40 - 50 GHz RF Connector Type K (m) Sensor linearity 1.8%, <18 GHz 2.5%, <40 GHz 3.5%, <50 GHz Rise time-1(ms) <0.004 Datasheet -
OPTICAL SPECTRUM ANALYZER
ANRITSU MS9710C
The MS9710C is a diffraction-grating spectrum analyzer for analyzing optical spectra in the 600 to 1750 nm wavelength band. In addition to uses such as measurement of LD and LED spectra, it has functions for measuring the transmission characteristics of passive elements such as optical isolators, as well as NF/Gain of optical fiber amplifier systems. In addition to its basic features, the superior stability and reliability of the diffraction grating (patent pending) offer the severe level and wavelength specifications particularly in the WDM band. This analyzer has the dynamic range, reception sensitivity and sweep speed requested by users, backed by Anritsu’s highlevel technology. The high sensitivity meets the exacting demands placed on today’s measuring instruments. In particular, the excellent wavelength and level specifications fully meet the dense WDM requirements (1520 to 1620 nm). The MS9710C Optical Spectrum Analyzer is the successor to the popular MS9710B but with improved functions and higher performance. The specifications have been upgraded for the important 1.55 µm band for WDM communications and have also been optimised to include the new requirements for the L-band (1570 to 1620 nm) use. In addition to the high reliability and excellent basic performance, this analyzer has a full range of application functions to support accurate measurement in the fastest possible time.
-
Antenna Analyzer
ANRITSU S331D
Site Master Handheld Cable and Antenna Analyzer Model S331D covers the 25 MHz to 4000 MHz spectrum. The S331D is designed for installing, provisioning, maintaining, and troubleshooting wireless base station cable and antenna systems.
Features:
Range di Frequenza: 25 MHz to 4 GHz
Misure: Return Loss / VSWR, Cable Loss, Distance-To-Fault (DTF), Optical DTF
Velocità Sweep: 2.5 msec / data point
Accuratezza: > 42 dB corrected directivity
Display: TFT a colori con retro illuminazione regolabile
Calibrazione: OSL, InstaCal, e FlexCal
RF Immunity: Performs accurate measurements in co-located cell sites
Signal Standard List / Cable Standard List: Quickly locates commonly used cables and frequency standards
Trace Overlay: Monitors changes with reference traces over time
Limit Lines: Single and Segmented Limit lines
Lingue supportate: Chinese, English, French, German, Japanese, Spanish
Handheld Software Tools: Downloads traces, creates reports, compares traces, and renames files
Datasheet -
BIRD SA-2500A
Easy-To-Use Cable & Antenna Tester with Digital Power Meter Option.
Bird's Site Analyzer is the user-friendly test solution for installing maintaining and troubleshooting your antenna and cable systems. Field engineers and technicians rely on this rugged handheld tool to get the job done. Wireless equipment manufacturers service providers and contractors worldwide approve of the analyzers precision VSWR and Return Loss results. This versatile unit also includes a Digital Power Meter option to accurately measure the output power of your base station.Features:
Easy operation for first-time, occasional or experienced users
Digital Power meter option compatible with Bird power sensors
Accurate and repeatable measurements
Immunity to on-channel interference (+13 dBm) for testing at co-located antenna sites
High-resolution color display
Fast sweep rate
On-screen comparison of live sweep and recalled trace
Unlimited trace overlays per report to compare antennas and track performance over time
Datasheet -
ECONOLAD COAXIAL RESISTOR
BIRD TERMALINE 8745
20 kW, Water-Cooled Terminations
Termaline Series RF Coaxial Terminations
The 8740 Econoload Series water-cooled load resistors are designed as compact, low VSWR and non-radiating terminations for high-power transmitter/transmission line systems. The units generate almost no ambient heat, making installation space minimal and convenient, in any position. The RF power is converted to heat in the hollow resistive film load resistor and directly absorbed by the water flowing through it.Broadband water-cooled load for long-term RF dissipation when heat must be efficiently transferred away from the area
Small size may be carried easily, used in any position and installed anywhere there is a source of potable water
Requires flow rate of up to 8 gallons (30.4 liters) per minute -
ECONOLAD COAXIAL RESISTOR
BIRD TERMALINE 8765
Load, Water Cooled 40kW .
Designed as a compact, low VSWR and non-radiating termination
Used with high-power transmitter and transmission line systems
Power Rating: 40kW Continuous
Frequency Range: 1kHz – 900 MHz
Connector: 3-1/8 EIA Flanged
VSWR: 1.10 (max)
Coolant: potable water
3-1/8 EIA Flange allows termination of full 40 kW up to 900 MHz
Requires flow rate of up to 10 gallons (38 liters) per minute -
Digital Multimeter
BK PRECISION 2831E
The 2831E multimeter is capable of performing typical measurements such as volts, ohms, and amperes with high precision, stability, and a VDC base accuracy of 0.03%. This meter can also measure frequency, period, continuity, and perform diode tests. Readings can be taken at a maximum rate of 25 readings/sec at a selectable rate of slow, medium, and fast.
Display resolution: 20,000 counts
Dual display for simultaneous viewing of two readings
True RMS AC + DC
AC voltage and current measurement over a wide frequency range
Limit mode for pass/fail testing
Built-in math functions: Rel, Max/Min, dBm, dB, %, Hold, Compare
CATI (1000V)/CATII (300V) protection
USB interface (Virtual COM)
SCPI compatible -
Power Supply
BK PRECISION 9111
Models 9110 and 9111 are a new type of power supply. Unlike conventional power supplies with fixed output ratings, they automatically recalculate voltage and current limits for each setting, providing any Volt/Amp combination within the rated power. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required and free up valuable bench space.
Output rating up to 180 W within 60 V/ 8 A (model 9111) or 100 W within 60 V/ 5 A (model 9110)
Digitally controlled, multi-ranging output
10mV/1mA resolution over the full range
Bright, easy to read display
Very compact and lightweight
Low ripple and noise
OCP, OVP and OTP protection
Output On/Off control
Store and Recall 4 x 100 groups of preset Volt/Amp values -
HANDLED RECORDER
BK PRECISION DAS30
The DAS 30/50/60 high-speed multi-function data acquisition recorders feature versatile channel configurability, high-speed sampling (1 MSa/s), a wide input range (±5 mV to ±500 V), large internal solid-state memory of up to 64 GB, and 9.5 hours of battery life. Combined with the CAT III isolation rating, these multifunction data acquisition systems are well suited for a wide variety of applications including maintenance and electrical power analysis.
Each channel can record a different measurement type such as voltage, temperature (thermocouple or RTD), current or frequency simultaneously, using a common time base. The 10-inch touchscreen features unlimited data scrolling, zoom in/out function as well as drag and drop delta cursors for precision measurements.
-
MULTI-CHANNEL RECORD
BK PRECISION SEFRAM DAS220BAT
The DAS240 series is ideal for measuring parameters commonly found in process applications including voltage, temperature (thermocouple and RTD), current, resistance, frequency and pulse. These multi-channel data loggers provide 20 universal analog channels with convenient screw input terminals that can be expanded up to 200 channels. The DAS240-BAT includes a built-in battery for up to 15 hours of autonomous operation.
Measurement results can be viewed graphically and numerically on a 10-inch color touch screen and saved to internal solid-state memory or transferred to an external USB memory stick. Icon-driven menus make the DAS240 easy to navigate. The free Windows PC software allows users to remotely control and configure the recorder, transfer logging results and configuration files, and view live data in graphical or numerical format on a connected PC.
B&K Precision data loggers and data acquisition recorders are designed and manufactured in France. Support services are provided through service centers around the world.
Features and benefits:
Compact and portable form factor suitable for remote and field use
Extended battery life of up to 15 hours (-BAT only)
Wide 10” touchscreen TFT display
20 universal analog input channels, expandable to 200 channels
Versatile temperature measurements supporting 9 types of thermocouples and 2 or 3-wire Pt100 / Pt1000 temperature sensors
DC Voltage ranges from ±0.5 mV to ±100 V
Measure voltage to ±100 V, resistance to 10 kOhm and current (with optional shunt input-terminal block)
16-bit vertical resolution
32 GB internal solid-state memory
WiFi monitoring and control (standard USB WiFi dongle required)
2 USB Host ports and 1 LAN interface -
Power Meter, Power Sensor
BOONTON 4232A + 51011-4B
The 4230A series is compatible with every Boonton diode, thermocouple, and waveguide sensor you’re like to have, from 10 kHz to 100 GHz. Any sensor can be upgraded with a sensor data adapter to automatically download sensor information to the instrument. The 4230A series integrates smoothly with ATE systems, via its standard IEEE-488 or optional RS-232 interfaces. Available LabVIEW software drivers unleash the power of the PC for data analysis and reporting, and allow the 4230A series to integrate smoothly with other instruments into an ATE system. Emulation of HP437, 438, and 4220A is standard
The Boonton 51011 .
Boonton 51011(4B) Features:
50 Ohm Input Impedance
Type N (M) RF Connector
Frequency Range 100 kHz to 12.4 GHz
Dynamic Range -60 dBm to +20 dBm
Overload Rating 300 mW
Datasheet