ItalianoShop
Showing 1141–1170 of 1386 results
-
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave ModulationSKU: 397€0.00 View Product -
Adapter
HP E5346A HIGH DENSITY PROBE ADAPTER
The HP E5346A Mictor probe provides a convenient and reliable connection to your target through a Mictor connector designed into your target. Route your signals of interest to the location containing the Mictor connector and when you are ready to measure these signals simply plug-in the Mictor probe. These probes can be used with a support shroud in environments where accidental unplugging of the probe is a concern. This probe can be used with any HP/Agilent logic analyzer with a 40-pin cable connector.
SKU: n/a -
Plug-in
HP/Agilent-Keysight 83570A
The HP 83570A RF plug-in provides a 18 MHz to 26.5 GHz.
Power is internally leveled to a flatness < ± 1.4 dB.
The output power has a calibrated range of 11 dB (7 dB for HP 83572A).
The power level may be manually set to a 0.1 dB resolution, or the power level may be remotely HP-IB programmed to a 0.01 dB resolution.
In addition to a single output power, these plug-ins also have a power sweep function.FMI 20093-KF20 Adaptor
HP OSCILLATOR
HP DOUBLER 5086-7300SKU: n/a -
Power Supply
KEYSIGHT – Agilent/Hp N8740A
Keysight's basic DC power supplies offer essential features for a tight budget. The Keysight N8740A is a 150 V, 22 A, 3300 W, single output power supply in a small 2U package. It offers flexible AC input options, analog/resistance control of output voltage and current, as well as parallel and series connection of multiple supplies to achieve more output current or voltage respectively.
Please select the AC input voltage option carefully. The AC input voltage hardware is permanently installed at the factory and cannot be changed under any circumstances after delivery. If the wrong AC input voltage option is purchased and delivered, the unit would need to be returned. Product returns are subject to Keysight approval and applicable charges. A new order would then have to be placed.
DC output ratingsVoltage: 150 V
Current: 22 A
Power: 3300 WProgramming accuracy
Voltage: 0.05% + 75 mV
Current: 0.1% + 44 mAOutput ripple and noise
CV p-p: 100 mV
CV rms: 25 mV
DatasheetSKU: n/a -
Oscilloscope 2 channels
TEKTRONIX 2440
Bandwidth: 300 MHz
2 Channels
Sample Rate: 500 MS/s
Record Length: 1024 Points
2 ns Glitch Capture
Autoprobe Function with P6137 Probe
300 MHz X-Y Bandwidth at Probe Tip
Automated Measurements
Extensive Triggering Capabilities
Printer/Plotter Output
On-Screen HELP Text Describing Every Front-Panel ControlApplications:
Analog and Digital Design
Applied Research
Manufacturing Testing
TelecommunicationsThe Tektronix 2440 is a Digital Oscilloscope that has 300 MHz and 2 channels
SKU: n/a
-
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave Modulation -
Adapter
HP E5346A HIGH DENSITY PROBE ADAPTER
The HP E5346A Mictor probe provides a convenient and reliable connection to your target through a Mictor connector designed into your target. Route your signals of interest to the location containing the Mictor connector and when you are ready to measure these signals simply plug-in the Mictor probe. These probes can be used with a support shroud in environments where accidental unplugging of the probe is a concern. This probe can be used with any HP/Agilent logic analyzer with a 40-pin cable connector.
-
Plug-in
HP/Agilent-Keysight 83570A
The HP 83570A RF plug-in provides a 18 MHz to 26.5 GHz.
Power is internally leveled to a flatness < ± 1.4 dB.
The output power has a calibrated range of 11 dB (7 dB for HP 83572A).
The power level may be manually set to a 0.1 dB resolution, or the power level may be remotely HP-IB programmed to a 0.01 dB resolution.
In addition to a single output power, these plug-ins also have a power sweep function.FMI 20093-KF20 Adaptor
HP OSCILLATOR
HP DOUBLER 5086-7300 -
Power Supply
KEYSIGHT – Agilent/Hp N8740A
Keysight's basic DC power supplies offer essential features for a tight budget. The Keysight N8740A is a 150 V, 22 A, 3300 W, single output power supply in a small 2U package. It offers flexible AC input options, analog/resistance control of output voltage and current, as well as parallel and series connection of multiple supplies to achieve more output current or voltage respectively.
Please select the AC input voltage option carefully. The AC input voltage hardware is permanently installed at the factory and cannot be changed under any circumstances after delivery. If the wrong AC input voltage option is purchased and delivered, the unit would need to be returned. Product returns are subject to Keysight approval and applicable charges. A new order would then have to be placed.
DC output ratingsVoltage: 150 V
Current: 22 A
Power: 3300 WProgramming accuracy
Voltage: 0.05% + 75 mV
Current: 0.1% + 44 mAOutput ripple and noise
CV p-p: 100 mV
CV rms: 25 mV
Datasheet -
Oscilloscope 2 channels
TEKTRONIX 2440
Bandwidth: 300 MHz
2 Channels
Sample Rate: 500 MS/s
Record Length: 1024 Points
2 ns Glitch Capture
Autoprobe Function with P6137 Probe
300 MHz X-Y Bandwidth at Probe Tip
Automated Measurements
Extensive Triggering Capabilities
Printer/Plotter Output
On-Screen HELP Text Describing Every Front-Panel ControlApplications:
Analog and Digital Design
Applied Research
Manufacturing Testing
TelecommunicationsThe Tektronix 2440 is a Digital Oscilloscope that has 300 MHz and 2 channels
-
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave Modulation€0.00 View Product -
Adapter
HP E5346A HIGH DENSITY PROBE ADAPTER
The HP E5346A Mictor probe provides a convenient and reliable connection to your target through a Mictor connector designed into your target. Route your signals of interest to the location containing the Mictor connector and when you are ready to measure these signals simply plug-in the Mictor probe. These probes can be used with a support shroud in environments where accidental unplugging of the probe is a concern. This probe can be used with any HP/Agilent logic analyzer with a 40-pin cable connector.
-
Plug-in
HP/Agilent-Keysight 83570A
The HP 83570A RF plug-in provides a 18 MHz to 26.5 GHz.
Power is internally leveled to a flatness < ± 1.4 dB.
The output power has a calibrated range of 11 dB (7 dB for HP 83572A).
The power level may be manually set to a 0.1 dB resolution, or the power level may be remotely HP-IB programmed to a 0.01 dB resolution.
In addition to a single output power, these plug-ins also have a power sweep function.FMI 20093-KF20 Adaptor
HP OSCILLATOR
HP DOUBLER 5086-7300 -
Power Supply
KEYSIGHT – Agilent/Hp N8740A
Keysight's basic DC power supplies offer essential features for a tight budget. The Keysight N8740A is a 150 V, 22 A, 3300 W, single output power supply in a small 2U package. It offers flexible AC input options, analog/resistance control of output voltage and current, as well as parallel and series connection of multiple supplies to achieve more output current or voltage respectively.
Please select the AC input voltage option carefully. The AC input voltage hardware is permanently installed at the factory and cannot be changed under any circumstances after delivery. If the wrong AC input voltage option is purchased and delivered, the unit would need to be returned. Product returns are subject to Keysight approval and applicable charges. A new order would then have to be placed.
DC output ratingsVoltage: 150 V
Current: 22 A
Power: 3300 WProgramming accuracy
Voltage: 0.05% + 75 mV
Current: 0.1% + 44 mAOutput ripple and noise
CV p-p: 100 mV
CV rms: 25 mV
Datasheet -
Oscilloscope 2 channels
TEKTRONIX 2440
Bandwidth: 300 MHz
2 Channels
Sample Rate: 500 MS/s
Record Length: 1024 Points
2 ns Glitch Capture
Autoprobe Function with P6137 Probe
300 MHz X-Y Bandwidth at Probe Tip
Automated Measurements
Extensive Triggering Capabilities
Printer/Plotter Output
On-Screen HELP Text Describing Every Front-Panel ControlApplications:
Analog and Digital Design
Applied Research
Manufacturing Testing
TelecommunicationsThe Tektronix 2440 is a Digital Oscilloscope that has 300 MHz and 2 channels