ItalianoShop
Showing 991–1020 of 1498 results
-
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave ModulationSKU: 397€0.00 View Product -
Oscilloscope 4 channles
Rigol MSO4054
500MHz, 4 channel, 4GS/s
MSO4000 Series is the new mainstream digital scope to meet the customer’s applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. – Bandwidth 500MHz – Sample Rate Analog channel up to 4 GSa/s, Digital Channel up to 1 GSa/s(MSO) – Standard Memory depth: Analog channel up to 140 Mpts, Digital Channel up to 28 Mpts(MSO) – 4 Analog Channels, 16 Digital channels(MSO) – Waveform capture rate Up to 110,000 waveforms per second, – Real Time Waveform Record, Replay & Analysis(Std. up to 200,000 frames) – Lower noise floor, the Min. vertical sensitivity is 1mV/div – Innovative “UltraVision” technology – A variety of Trigger functions – Support serial bus trigger(Std.) and decoding(Opt.) for both analog and digital channels – Complete Connectivity: USB Host& Device, LAN(LXI-C), VGA, AUX,USB-GPIB(Opt.) – 9 inch WVGA(800X480), 256 level intensity grading displaySKU: 726 -
Power Meter
HP438A Dual Sensor Power Meter
The HP 438A power meter is a dual-channel power meter designed specifically for ATE systems. The compact front panel saves critical rack space, while the dual-channel design allows simple and accurate measurements of the ratio and difference of power levels from two separate sensors. This meter is compatible with the 8480 series of power sensors.
GPIB capability is standard on the 438A. For U.S. Air Force Modular Automatic Test Equipment (MATE) system application, Option 700 provides the 438A with the internal capability to be controlled by the MATE Control Interface Intermediate Language (CIIL).
* Two power sensors for multi-port measurement
* Ratio mode for measuring gain compression
* Programmable high and low power limits for unattended power monitoring
* Frequency: 100 kHz to 26.5 GHz
* Power Range: -70 to +44 dBm
* Dynamic Range: 50 dB
* Measurement Modes: A, B, A-B, B-A, A/B, B/ASKU: 1061 -
Fiber Optic Test Set
Exfo FOT-910
The EXFO FOT-910 is a Fiber Optic Test Set with Singlemode 1310nm, 1550nm. EXFO’s FOT-910 automated attenuation/ORL test set is an advanced-technology testing device, designed to save time and money by increasing the efficiency of fiber-testing crews. The FOT-910 measures relative loss (dB), absolute power (dBm), back-reflection (dB), and transmission equipment source stability. It tests bi-directional loss on a single fiber in 33 seconds. Single- or dual-wavelength (850/1300 nm or 1310/1550 nm) loss tests can be performed at the touch of a FasTesT button. On-site reference capability eliminates side-by-side source and meter referencing. Test results can be automatically stored in the non-volatile 680 register memory and printed out in report form. Stringent transmission requirements for high-bandwidth applications demand precise network component and connector back-reflection measurements. The FOT-910 measures back-reflection from 0 dB to -55 dB easily and stores the readings for fast reference.
1310nm-1550nmSKU: 1096 -
Senza categoria
EWIG CR200 Crucible for the tinning and rewinding of copper wires
EWIG CR200 Crucible for the tinning and rewinding of copper wires
Compatible with lead-free alloys
Electronic regulation of power and temperature from 0 to 500 ° C
200W-230V ~ 2000 10 504
200W-230V ~ 2000 10 553SKU: n/a
-
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave Modulation -
Oscilloscope 4 channles
Rigol MSO4054
500MHz, 4 channel, 4GS/s
MSO4000 Series is the new mainstream digital scope to meet the customer’s applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. – Bandwidth 500MHz – Sample Rate Analog channel up to 4 GSa/s, Digital Channel up to 1 GSa/s(MSO) – Standard Memory depth: Analog channel up to 140 Mpts, Digital Channel up to 28 Mpts(MSO) – 4 Analog Channels, 16 Digital channels(MSO) – Waveform capture rate Up to 110,000 waveforms per second, – Real Time Waveform Record, Replay & Analysis(Std. up to 200,000 frames) – Lower noise floor, the Min. vertical sensitivity is 1mV/div – Innovative “UltraVision” technology – A variety of Trigger functions – Support serial bus trigger(Std.) and decoding(Opt.) for both analog and digital channels – Complete Connectivity: USB Host& Device, LAN(LXI-C), VGA, AUX,USB-GPIB(Opt.) – 9 inch WVGA(800X480), 256 level intensity grading display -
Power Meter
HP438A Dual Sensor Power Meter
The HP 438A power meter is a dual-channel power meter designed specifically for ATE systems. The compact front panel saves critical rack space, while the dual-channel design allows simple and accurate measurements of the ratio and difference of power levels from two separate sensors. This meter is compatible with the 8480 series of power sensors.
GPIB capability is standard on the 438A. For U.S. Air Force Modular Automatic Test Equipment (MATE) system application, Option 700 provides the 438A with the internal capability to be controlled by the MATE Control Interface Intermediate Language (CIIL).
* Two power sensors for multi-port measurement
* Ratio mode for measuring gain compression
* Programmable high and low power limits for unattended power monitoring
* Frequency: 100 kHz to 26.5 GHz
* Power Range: -70 to +44 dBm
* Dynamic Range: 50 dB
* Measurement Modes: A, B, A-B, B-A, A/B, B/A -
Fiber Optic Test Set
Exfo FOT-910
The EXFO FOT-910 is a Fiber Optic Test Set with Singlemode 1310nm, 1550nm. EXFO’s FOT-910 automated attenuation/ORL test set is an advanced-technology testing device, designed to save time and money by increasing the efficiency of fiber-testing crews. The FOT-910 measures relative loss (dB), absolute power (dBm), back-reflection (dB), and transmission equipment source stability. It tests bi-directional loss on a single fiber in 33 seconds. Single- or dual-wavelength (850/1300 nm or 1310/1550 nm) loss tests can be performed at the touch of a FasTesT button. On-site reference capability eliminates side-by-side source and meter referencing. Test results can be automatically stored in the non-volatile 680 register memory and printed out in report form. Stringent transmission requirements for high-bandwidth applications demand precise network component and connector back-reflection measurements. The FOT-910 measures back-reflection from 0 dB to -55 dB easily and stores the readings for fast reference.
1310nm-1550nm
-
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave Modulation€0.00 View Product -
Oscilloscope 4 channles
Rigol MSO4054
500MHz, 4 channel, 4GS/s
MSO4000 Series is the new mainstream digital scope to meet the customer’s applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. – Bandwidth 500MHz – Sample Rate Analog channel up to 4 GSa/s, Digital Channel up to 1 GSa/s(MSO) – Standard Memory depth: Analog channel up to 140 Mpts, Digital Channel up to 28 Mpts(MSO) – 4 Analog Channels, 16 Digital channels(MSO) – Waveform capture rate Up to 110,000 waveforms per second, – Real Time Waveform Record, Replay & Analysis(Std. up to 200,000 frames) – Lower noise floor, the Min. vertical sensitivity is 1mV/div – Innovative “UltraVision” technology – A variety of Trigger functions – Support serial bus trigger(Std.) and decoding(Opt.) for both analog and digital channels – Complete Connectivity: USB Host& Device, LAN(LXI-C), VGA, AUX,USB-GPIB(Opt.) – 9 inch WVGA(800X480), 256 level intensity grading display -
Power Meter
HP438A Dual Sensor Power Meter
The HP 438A power meter is a dual-channel power meter designed specifically for ATE systems. The compact front panel saves critical rack space, while the dual-channel design allows simple and accurate measurements of the ratio and difference of power levels from two separate sensors. This meter is compatible with the 8480 series of power sensors.
GPIB capability is standard on the 438A. For U.S. Air Force Modular Automatic Test Equipment (MATE) system application, Option 700 provides the 438A with the internal capability to be controlled by the MATE Control Interface Intermediate Language (CIIL).
* Two power sensors for multi-port measurement
* Ratio mode for measuring gain compression
* Programmable high and low power limits for unattended power monitoring
* Frequency: 100 kHz to 26.5 GHz
* Power Range: -70 to +44 dBm
* Dynamic Range: 50 dB
* Measurement Modes: A, B, A-B, B-A, A/B, B/A -
Fiber Optic Test Set
Exfo FOT-910
The EXFO FOT-910 is a Fiber Optic Test Set with Singlemode 1310nm, 1550nm. EXFO’s FOT-910 automated attenuation/ORL test set is an advanced-technology testing device, designed to save time and money by increasing the efficiency of fiber-testing crews. The FOT-910 measures relative loss (dB), absolute power (dBm), back-reflection (dB), and transmission equipment source stability. It tests bi-directional loss on a single fiber in 33 seconds. Single- or dual-wavelength (850/1300 nm or 1310/1550 nm) loss tests can be performed at the touch of a FasTesT button. On-site reference capability eliminates side-by-side source and meter referencing. Test results can be automatically stored in the non-volatile 680 register memory and printed out in report form. Stringent transmission requirements for high-bandwidth applications demand precise network component and connector back-reflection measurements. The FOT-910 measures back-reflection from 0 dB to -55 dB easily and stores the readings for fast reference.
1310nm-1550nm