ItalianoRigol
Showing 211–239 of 239 results
-
Oscilloscope 4 channles
RIGOL MSO8204
The Rigol MSO8204 is a multifunctional and high-performance digital oscilloscope designed on the basis of the UltraVision II technology developed by RIGOL.
Integrating 6 independent instruments into one, the Rigol MSO8204 is equipped with super high sample bandwidth ratio of 10 GSa/s, extremely high memory depth of up to 500 Mpts, clear 10.1″ display, excellent waveform capture rate of 600.000 wfms/s, and powerful data analysis functions.
Many of its specifications have reached the top level in the industry. With sound solutions for mainframes, optional & accessories, and application software, it has aroused great attention from customers in the areas such as industrial control, power supply, and automotive electronics.
In today's inegrated designfield, a highly integrated comprehensive digital oscilloscope has become a useful tool for design engineers. The Rigol MSO8204 digital oscilloscope launched by RIGOL this time integrates 6 independent instruments into 1, including one digital oscilloscope, one 16-channel logic analyzer, one arbitrary waveform generator, one digital voltmeter, one high-precision frequency counter and accumulator, and one protocol analyzer.
The Rigol MSO8204 offers you a flexible and economical solution to address your actual needs.
RIGOL MSO8000-BND Function and application bundle includes:
– MSO8000-COMP RS232/UART trigger and decode
– MSO8000-EMBD I2C/SPI trigger and decode
– MSO8000-AUTO CAN/LIN trigger and decode
– MSO8000-FLEX FlexRay trigger and decode
– MSO8000-AUDIO I2S trigger and decode
– MSO8000-AERO MIL-STD-1553 trigger and decode
– MSO8000-AWG dual channel 25MHz AWG
– MSO8000-JITTER Real-time eye diagram and jitter analysis
– MSO8000-PWR Power Analysis
DatasheetSKU: n/a€11,695.00 View Product -
Oscilloscope 4 channles
RIGOL MSO8204A
2 GHz (50 Ω), 500MHz (1 MΩ), 4 analog channels, 1 EXT channel, 16 digital channels, Real-time sample rate up to 10 GSa/s, Memory Depth up to 500 Mpts, Built-in dual-channel function/arbitrary waveform generator (optional), up to 12-bit vertical resolution, 10.1'' HD touch display
Analog channel bandwidth: 2 GHz (50 Ω), 500MHz (1 MΩ)
4 analog channels, 1 EXT channel, 16 digital channels
Built-in dual-channel function/arbitrary waveform generator (optional)
up to 12-bit vertical resolution
Real-time sample rate up to 10 GSa/s
Memory Depth up to 500 Mpts
10.1'' 1024*600 HD touch display
Web Control and VNC remote command
Waveform histogram analysis (standard)
Auto measurement of 41 waveform parametersSKU: n/a€10,315.00€12,895.00View Product -
-
-
-
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3015E
Spectrum Analyzer from 9 kHz to 1.5 GHz
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
DatasheetSKU: n/a€1,595.00 View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3015E-TG
Real-Time Spectrum Analyzer from 9 kHz to 1.5 GHz with Tracking Generator.
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
DatasheetSKU: n/a€1,795.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3015N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfacesSKU: n/a€1,990.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
RSA3000 SERIES
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements availableSKU: n/a€3,390.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements availableSKU: n/a€4,290.00 View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
DatasheetSKU: n/a€2,999.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
he Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements availableSKU: n/a€2,995.00 View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E-TG
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz with Tracking Generator.
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
DatasheetSKU: n/a€3,395.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
DatasheetSKU: n/a€3,690.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements availableSKU: n/a€4,390.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements availableSKU: n/a€5,490.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
DatasheetSKU: n/a€4,990.00 View Product -
Spectrum Analyzer
RIGOL RSA5032
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Scheda TecnicaSKU: n/a€5,990.00 View Product -
Spectrum Analyzer
RIGOL RSA5032-TG
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.9 kHz to 3.2 or 6.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
1 Hz Minimum Resolution Bandwidth (RBW)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available
DatasheetSKU: n/a€6,990.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5032N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
SKU: n/a€4,990.00 View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.- 9 kHz to 3.2 or 6.5 GHz Frequency Range
- 10.1” Capacitive touchscreen display
- Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
- Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
- Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
- 7 Real-Time visualization modes
- 100 % POI as low as 7. 45 µs
- 1 Hz Minimum Resolution Bandwidth (RBW)
- 1 ms full span sweep speed
- EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
- Tracking Generator and VSWR measurements available
SKU: n/a€7,690.00 View Product -
Spectrum Analyzer
RIGOL RSA5065-TG
Per tutti i nuovi ordini di versioni RSA5000 (-TG) forniamo gratuitamente una larghezza di banda in tempo reale di 40 MHz e opzione preamplificatore (RSA5000-B40 e RSA5000-PA)
Gli ingegneri che integrano WiFi, Bluetooth e altre moderne tecnologie RF devono affrontare sfide complesse come i segnali di salto di frequenza, i conflitti di canale e le interferenze dello spettro. Gli analizzatori di spettro in tempo reale apportano la dimensione del tempo all'analisi RF semplificando il monitoraggio e la caratterizzazione di questi complessi sistemi RF. RSA5000 combina prestazioni in tempo reale leader del settore (POI da 7.45μs 100%), display con dati avanzati e opzioni di trigger avanzate che consentono all'utente di acquisire, identificare e analizzare rapidamente questi eventi complessi.
La serie Rigol RSA5000 è una serie di analizzatori di spettro compatti e leggeri con eccellenti capacità di analisi dello spettro standard combinate con un analizzatore di spettro in tempo reale che consente di non perdere alcun segnale di durata superiore a 7,45 μs.
La larghezza di banda in tempo reale di 25 MHz (40 MHz opzionale) e il Trigger della maschera di frequenza consentono di visualizzare, isolare e acquisire segnali per analizzare il loro comportamento su ampiezza, frequenza e tempo.
Questi analizzatori di spettro ridefiniscono la categoria di prodotti dell'analizzatore di spettro per uso generico aggiungendo funzionalità di trigger e analisi dello spettro in tempo reale e stabiliscono un nuovo livello di prestazioni e prezzo. La famiglia RSA5000 è dotata di display touchscreen da 10,1 “, design compatto e interfaccia e operazioni facili da usare, che lo rendono ideale per applicazioni da banco o da campo nei test e produzione RF e wireless come IoT, RFID, segnali modulati analogici e digitali. Embedded-System-Designer può attraversare trigger e analizzare segnali di bus come IC2, SPI con segnali RF.Intervallo di frequenze da 9 kHz a 3.2 o 6.5 GHz
Display touchscreen capacitivo da 10,1 “
Livello medio di rumore visualizzato fino a -165 dBm con opt. preamplificatore
Analisi in tempo reale Larghezza di banda dello standard 25 MHz (opzione 40 MHz)
Trigger di frequenza maschera, trigger di livello di potenza IF e trigger esterno
7 modalità di visualizzazione in tempo reale
100% POI a partire da 7. 45 μs
Larghezza di banda minima risoluzione 1 Hz (RBW)
Velocità di scansione a span intera 1 ms
Standard EMI RBW e rivelatore (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Disponibili le misure di monitoraggio del generatore e del VSWR
Scheda TecnicaSKU: n/a€8,690.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
DatasheetSKU: n/a€6,990.00 View Product
-
Oscilloscope 4 channles
RIGOL MSO8204
The Rigol MSO8204 is a multifunctional and high-performance digital oscilloscope designed on the basis of the UltraVision II technology developed by RIGOL.
Integrating 6 independent instruments into one, the Rigol MSO8204 is equipped with super high sample bandwidth ratio of 10 GSa/s, extremely high memory depth of up to 500 Mpts, clear 10.1″ display, excellent waveform capture rate of 600.000 wfms/s, and powerful data analysis functions.
Many of its specifications have reached the top level in the industry. With sound solutions for mainframes, optional & accessories, and application software, it has aroused great attention from customers in the areas such as industrial control, power supply, and automotive electronics.
In today's inegrated designfield, a highly integrated comprehensive digital oscilloscope has become a useful tool for design engineers. The Rigol MSO8204 digital oscilloscope launched by RIGOL this time integrates 6 independent instruments into 1, including one digital oscilloscope, one 16-channel logic analyzer, one arbitrary waveform generator, one digital voltmeter, one high-precision frequency counter and accumulator, and one protocol analyzer.
The Rigol MSO8204 offers you a flexible and economical solution to address your actual needs.
RIGOL MSO8000-BND Function and application bundle includes:
– MSO8000-COMP RS232/UART trigger and decode
– MSO8000-EMBD I2C/SPI trigger and decode
– MSO8000-AUTO CAN/LIN trigger and decode
– MSO8000-FLEX FlexRay trigger and decode
– MSO8000-AUDIO I2S trigger and decode
– MSO8000-AERO MIL-STD-1553 trigger and decode
– MSO8000-AWG dual channel 25MHz AWG
– MSO8000-JITTER Real-time eye diagram and jitter analysis
– MSO8000-PWR Power Analysis
Datasheet -
Oscilloscope 4 channles
RIGOL MSO8204A
2 GHz (50 Ω), 500MHz (1 MΩ), 4 analog channels, 1 EXT channel, 16 digital channels, Real-time sample rate up to 10 GSa/s, Memory Depth up to 500 Mpts, Built-in dual-channel function/arbitrary waveform generator (optional), up to 12-bit vertical resolution, 10.1'' HD touch display
Analog channel bandwidth: 2 GHz (50 Ω), 500MHz (1 MΩ)
4 analog channels, 1 EXT channel, 16 digital channels
Built-in dual-channel function/arbitrary waveform generator (optional)
up to 12-bit vertical resolution
Real-time sample rate up to 10 GSa/s
Memory Depth up to 500 Mpts
10.1'' 1024*600 HD touch display
Web Control and VNC remote command
Waveform histogram analysis (standard)
Auto measurement of 41 waveform parameters -
-
-
-
-
-
-
-
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3015E
Spectrum Analyzer from 9 kHz to 1.5 GHz
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3015E-TG
Real-Time Spectrum Analyzer from 9 kHz to 1.5 GHz with Tracking Generator.
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3015N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
RSA3000 SERIES
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
he Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E-TG
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz with Tracking Generator.
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
Datasheet -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
Datasheet -
Spectrum Analyzer
RIGOL RSA5032
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Scheda Tecnica -
Spectrum Analyzer
RIGOL RSA5032-TG
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.9 kHz to 3.2 or 6.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
1 Hz Minimum Resolution Bandwidth (RBW)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available
Datasheet -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5032N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
-
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.- 9 kHz to 3.2 or 6.5 GHz Frequency Range
- 10.1” Capacitive touchscreen display
- Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
- Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
- Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
- 7 Real-Time visualization modes
- 100 % POI as low as 7. 45 µs
- 1 Hz Minimum Resolution Bandwidth (RBW)
- 1 ms full span sweep speed
- EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
- Tracking Generator and VSWR measurements available
-
Spectrum Analyzer
RIGOL RSA5065-TG
Per tutti i nuovi ordini di versioni RSA5000 (-TG) forniamo gratuitamente una larghezza di banda in tempo reale di 40 MHz e opzione preamplificatore (RSA5000-B40 e RSA5000-PA)
Gli ingegneri che integrano WiFi, Bluetooth e altre moderne tecnologie RF devono affrontare sfide complesse come i segnali di salto di frequenza, i conflitti di canale e le interferenze dello spettro. Gli analizzatori di spettro in tempo reale apportano la dimensione del tempo all'analisi RF semplificando il monitoraggio e la caratterizzazione di questi complessi sistemi RF. RSA5000 combina prestazioni in tempo reale leader del settore (POI da 7.45μs 100%), display con dati avanzati e opzioni di trigger avanzate che consentono all'utente di acquisire, identificare e analizzare rapidamente questi eventi complessi.
La serie Rigol RSA5000 è una serie di analizzatori di spettro compatti e leggeri con eccellenti capacità di analisi dello spettro standard combinate con un analizzatore di spettro in tempo reale che consente di non perdere alcun segnale di durata superiore a 7,45 μs.
La larghezza di banda in tempo reale di 25 MHz (40 MHz opzionale) e il Trigger della maschera di frequenza consentono di visualizzare, isolare e acquisire segnali per analizzare il loro comportamento su ampiezza, frequenza e tempo.
Questi analizzatori di spettro ridefiniscono la categoria di prodotti dell'analizzatore di spettro per uso generico aggiungendo funzionalità di trigger e analisi dello spettro in tempo reale e stabiliscono un nuovo livello di prestazioni e prezzo. La famiglia RSA5000 è dotata di display touchscreen da 10,1 “, design compatto e interfaccia e operazioni facili da usare, che lo rendono ideale per applicazioni da banco o da campo nei test e produzione RF e wireless come IoT, RFID, segnali modulati analogici e digitali. Embedded-System-Designer può attraversare trigger e analizzare segnali di bus come IC2, SPI con segnali RF.Intervallo di frequenze da 9 kHz a 3.2 o 6.5 GHz
Display touchscreen capacitivo da 10,1 “
Livello medio di rumore visualizzato fino a -165 dBm con opt. preamplificatore
Analisi in tempo reale Larghezza di banda dello standard 25 MHz (opzione 40 MHz)
Trigger di frequenza maschera, trigger di livello di potenza IF e trigger esterno
7 modalità di visualizzazione in tempo reale
100% POI a partire da 7. 45 μs
Larghezza di banda minima risoluzione 1 Hz (RBW)
Velocità di scansione a span intera 1 ms
Standard EMI RBW e rivelatore (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Disponibili le misure di monitoraggio del generatore e del VSWR
Scheda Tecnica -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Datasheet
-
Oscilloscope 4 channles
RIGOL MSO8204
The Rigol MSO8204 is a multifunctional and high-performance digital oscilloscope designed on the basis of the UltraVision II technology developed by RIGOL.
Integrating 6 independent instruments into one, the Rigol MSO8204 is equipped with super high sample bandwidth ratio of 10 GSa/s, extremely high memory depth of up to 500 Mpts, clear 10.1″ display, excellent waveform capture rate of 600.000 wfms/s, and powerful data analysis functions.
Many of its specifications have reached the top level in the industry. With sound solutions for mainframes, optional & accessories, and application software, it has aroused great attention from customers in the areas such as industrial control, power supply, and automotive electronics.
In today's inegrated designfield, a highly integrated comprehensive digital oscilloscope has become a useful tool for design engineers. The Rigol MSO8204 digital oscilloscope launched by RIGOL this time integrates 6 independent instruments into 1, including one digital oscilloscope, one 16-channel logic analyzer, one arbitrary waveform generator, one digital voltmeter, one high-precision frequency counter and accumulator, and one protocol analyzer.
The Rigol MSO8204 offers you a flexible and economical solution to address your actual needs.
RIGOL MSO8000-BND Function and application bundle includes:
– MSO8000-COMP RS232/UART trigger and decode
– MSO8000-EMBD I2C/SPI trigger and decode
– MSO8000-AUTO CAN/LIN trigger and decode
– MSO8000-FLEX FlexRay trigger and decode
– MSO8000-AUDIO I2S trigger and decode
– MSO8000-AERO MIL-STD-1553 trigger and decode
– MSO8000-AWG dual channel 25MHz AWG
– MSO8000-JITTER Real-time eye diagram and jitter analysis
– MSO8000-PWR Power Analysis
Datasheet€11,695.00 View Product -
Oscilloscope 4 channles
RIGOL MSO8204A
2 GHz (50 Ω), 500MHz (1 MΩ), 4 analog channels, 1 EXT channel, 16 digital channels, Real-time sample rate up to 10 GSa/s, Memory Depth up to 500 Mpts, Built-in dual-channel function/arbitrary waveform generator (optional), up to 12-bit vertical resolution, 10.1'' HD touch display
Analog channel bandwidth: 2 GHz (50 Ω), 500MHz (1 MΩ)
4 analog channels, 1 EXT channel, 16 digital channels
Built-in dual-channel function/arbitrary waveform generator (optional)
up to 12-bit vertical resolution
Real-time sample rate up to 10 GSa/s
Memory Depth up to 500 Mpts
10.1'' 1024*600 HD touch display
Web Control and VNC remote command
Waveform histogram analysis (standard)
Auto measurement of 41 waveform parameters€10,315.00€12,895.00View Product -
€825.00 View Product
-
€1,580.00 View Product
-
€4,630.00 View Product
-
€4,510.00 View Product
-
€445.00 View Product
-
€535.00 View Product
-
€745.00 View Product
-
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3015E
Spectrum Analyzer from 9 kHz to 1.5 GHz
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet€1,595.00 View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3015E-TG
Real-Time Spectrum Analyzer from 9 kHz to 1.5 GHz with Tracking Generator.
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet€1,795.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3015N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces€1,990.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
RSA3000 SERIES
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available€3,390.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available€4,290.00 View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet€2,999.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
he Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available€2,995.00 View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E-TG
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz with Tracking Generator.
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet€3,395.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
Datasheet€3,690.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available€4,390.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available€5,490.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
Datasheet€4,990.00 View Product -
Spectrum Analyzer
RIGOL RSA5032
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Scheda Tecnica€5,990.00 View Product -
Spectrum Analyzer
RIGOL RSA5032-TG
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.9 kHz to 3.2 or 6.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
1 Hz Minimum Resolution Bandwidth (RBW)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available
Datasheet€6,990.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5032N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
€4,990.00 View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.- 9 kHz to 3.2 or 6.5 GHz Frequency Range
- 10.1” Capacitive touchscreen display
- Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
- Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
- Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
- 7 Real-Time visualization modes
- 100 % POI as low as 7. 45 µs
- 1 Hz Minimum Resolution Bandwidth (RBW)
- 1 ms full span sweep speed
- EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
- Tracking Generator and VSWR measurements available
€7,690.00 View Product -
Spectrum Analyzer
RIGOL RSA5065-TG
Per tutti i nuovi ordini di versioni RSA5000 (-TG) forniamo gratuitamente una larghezza di banda in tempo reale di 40 MHz e opzione preamplificatore (RSA5000-B40 e RSA5000-PA)
Gli ingegneri che integrano WiFi, Bluetooth e altre moderne tecnologie RF devono affrontare sfide complesse come i segnali di salto di frequenza, i conflitti di canale e le interferenze dello spettro. Gli analizzatori di spettro in tempo reale apportano la dimensione del tempo all'analisi RF semplificando il monitoraggio e la caratterizzazione di questi complessi sistemi RF. RSA5000 combina prestazioni in tempo reale leader del settore (POI da 7.45μs 100%), display con dati avanzati e opzioni di trigger avanzate che consentono all'utente di acquisire, identificare e analizzare rapidamente questi eventi complessi.
La serie Rigol RSA5000 è una serie di analizzatori di spettro compatti e leggeri con eccellenti capacità di analisi dello spettro standard combinate con un analizzatore di spettro in tempo reale che consente di non perdere alcun segnale di durata superiore a 7,45 μs.
La larghezza di banda in tempo reale di 25 MHz (40 MHz opzionale) e il Trigger della maschera di frequenza consentono di visualizzare, isolare e acquisire segnali per analizzare il loro comportamento su ampiezza, frequenza e tempo.
Questi analizzatori di spettro ridefiniscono la categoria di prodotti dell'analizzatore di spettro per uso generico aggiungendo funzionalità di trigger e analisi dello spettro in tempo reale e stabiliscono un nuovo livello di prestazioni e prezzo. La famiglia RSA5000 è dotata di display touchscreen da 10,1 “, design compatto e interfaccia e operazioni facili da usare, che lo rendono ideale per applicazioni da banco o da campo nei test e produzione RF e wireless come IoT, RFID, segnali modulati analogici e digitali. Embedded-System-Designer può attraversare trigger e analizzare segnali di bus come IC2, SPI con segnali RF.Intervallo di frequenze da 9 kHz a 3.2 o 6.5 GHz
Display touchscreen capacitivo da 10,1 “
Livello medio di rumore visualizzato fino a -165 dBm con opt. preamplificatore
Analisi in tempo reale Larghezza di banda dello standard 25 MHz (opzione 40 MHz)
Trigger di frequenza maschera, trigger di livello di potenza IF e trigger esterno
7 modalità di visualizzazione in tempo reale
100% POI a partire da 7. 45 μs
Larghezza di banda minima risoluzione 1 Hz (RBW)
Velocità di scansione a span intera 1 ms
Standard EMI RBW e rivelatore (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Disponibili le misure di monitoraggio del generatore e del VSWR
Scheda Tecnica€8,690.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Datasheet€6,990.00 View Product