ItalianoHP-Agilent/Keysight
Showing 151–180 of 484 results
-
Power Supply
HP-Agilent/Keysight 6012B
These single-output supplies can replace multiple units, saving rack space and reducing system cost and complexity.
Autoranging outputs provide maximum power at a variety of operating points
Overvoltage features protect DUTs quickly and automatically
Auto-parallel or auto-series connections enable greater output flexibility
Ten-turn pots for precise local control1200W, DC System Power Supplies,60V – 50A.
DatasheetSKU: n/a -
Load
HP-Agilent/Keysight 60503B
The N3303A 250 Watt Electronic Load Module may not be used in a 6050A or 6051A Electronic Load Mainframe. The N3303A may only be used with a N3300A or N3301A Electronic Load Mainframe.
The Keysight 60503B module along with the dc electronic load mainframe are ideal for the test and evaluation of dc power sources and power components and are well suited for applications in areas such as research and development, production, and incoming inspection. Each module includes programming inputs that allow control of load current via an analog control voltage.
Analog voltage control in constant current mode
Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity.SKU: n/a -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers
SKU: 388 -
Power Supply
HP-Agilent/Keysight 6281A
The Keysight 6827A power supply/amplifier is a general-purpose instruments useful in laboratories engaged in research and development of electronic systems, circuitry, or components.
High-speed remote programming
Overload protection
Wideband selection
Bipolar voltage
Current sink or source
Output ratings (0 – 55°C): -10 V to +10 V, -100 V to + 100 V; 0 to 0.5A both ranges
Ripple and noise: CV: 10 mV rms, 50 mV peak-to-peak CC: 0.4 mA rms, 5 mA peak-to-peak
Transient recovery: 100 us, 100 mV
Frequency response (+1, -3 dB): dc to 30 kHz fixed gain dc to 15 kHz variable gain
Physical Specifications: Weight: 8.2 kg (18 lb); Size: 198 mm W x 155 mm H x 316 mm D (7.78 in x 6.09 in x 12. 44 in)SKU: n/a -
Mainframe
HP-Agilent/Keysight 66000A
The Hp 66000A modular power system simplifies test-system assembly, cabling, programming, debugging and operation. The 66000A is 4 U, 8 slot mainframe that accepts 1 to 8 modules below in any combination. Modules are ordered separately.
Features:High density: eight slots in 7 inches of rack space
Output sequencing
Low ripple and noise
High-accuracy read-back of voltage and current over GPIB
Standard Commands for Programmable Instruments (SCPI)
Optional keyboard and display unit
Serial link to connect two mainframes at one GPIB address
Optional isolation and polarity-reversal relays
Built-in self-test
DatasheetSKU: n/a -
Power Supply
HP-Agilent/Keysight 6623A
Agilent high performance DC power supplies offer spec and accuracy for test optimization. The multiple output, 40W – 10 W GPIB 6621A – 6624A and 6627A provide dual-range outputs- fast, low-noise outputs- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. The Agilent 80W, triple-output 6623A is a versatile solution to help improve system accuracy and reduce test time in a 3U high package. Output Ratings – Low-range volts, amps: 0 to 7 V, 0 to 5 A- 0 to 20 V, 0 to 2 A- 0 to 7 V, 0 to 10 A – High range volts, amps: 0 to 20 V, 0 to 2 A- 0 to 50 V, 0 to 0.8 A- 0 to 20 V, 0 to 4 A Programming Accuracy at 25°C ±5°C – Voltage: 0.06% + 19 mV, 50 mV, 19 mV – Current: 0.16% + 50 mA, 20 mA, 100mA Ripple & Noise (20 Hz to 20 MHz) – Voltage rms: 500 µV – Peak-to-peak: 3 mV – Current rms: 1 mA
DatasheetSKU: 319€450.00 View Product
-
Power Supply
HP-Agilent/Keysight 6012B
These single-output supplies can replace multiple units, saving rack space and reducing system cost and complexity.
Autoranging outputs provide maximum power at a variety of operating points
Overvoltage features protect DUTs quickly and automatically
Auto-parallel or auto-series connections enable greater output flexibility
Ten-turn pots for precise local control1200W, DC System Power Supplies,60V – 50A.
Datasheet -
Load
HP-Agilent/Keysight 60503B
The N3303A 250 Watt Electronic Load Module may not be used in a 6050A or 6051A Electronic Load Mainframe. The N3303A may only be used with a N3300A or N3301A Electronic Load Mainframe.
The Keysight 60503B module along with the dc electronic load mainframe are ideal for the test and evaluation of dc power sources and power components and are well suited for applications in areas such as research and development, production, and incoming inspection. Each module includes programming inputs that allow control of load current via an analog control voltage.
Analog voltage control in constant current mode
Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity. -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers
-
Power Supply
HP-Agilent/Keysight 6281A
The Keysight 6827A power supply/amplifier is a general-purpose instruments useful in laboratories engaged in research and development of electronic systems, circuitry, or components.
High-speed remote programming
Overload protection
Wideband selection
Bipolar voltage
Current sink or source
Output ratings (0 – 55°C): -10 V to +10 V, -100 V to + 100 V; 0 to 0.5A both ranges
Ripple and noise: CV: 10 mV rms, 50 mV peak-to-peak CC: 0.4 mA rms, 5 mA peak-to-peak
Transient recovery: 100 us, 100 mV
Frequency response (+1, -3 dB): dc to 30 kHz fixed gain dc to 15 kHz variable gain
Physical Specifications: Weight: 8.2 kg (18 lb); Size: 198 mm W x 155 mm H x 316 mm D (7.78 in x 6.09 in x 12. 44 in) -
Mainframe
HP-Agilent/Keysight 66000A
The Hp 66000A modular power system simplifies test-system assembly, cabling, programming, debugging and operation. The 66000A is 4 U, 8 slot mainframe that accepts 1 to 8 modules below in any combination. Modules are ordered separately.
Features:High density: eight slots in 7 inches of rack space
Output sequencing
Low ripple and noise
High-accuracy read-back of voltage and current over GPIB
Standard Commands for Programmable Instruments (SCPI)
Optional keyboard and display unit
Serial link to connect two mainframes at one GPIB address
Optional isolation and polarity-reversal relays
Built-in self-test
Datasheet -
Power Supply
HP-Agilent/Keysight 6623A
Agilent high performance DC power supplies offer spec and accuracy for test optimization. The multiple output, 40W – 10 W GPIB 6621A – 6624A and 6627A provide dual-range outputs- fast, low-noise outputs- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. The Agilent 80W, triple-output 6623A is a versatile solution to help improve system accuracy and reduce test time in a 3U high package. Output Ratings – Low-range volts, amps: 0 to 7 V, 0 to 5 A- 0 to 20 V, 0 to 2 A- 0 to 7 V, 0 to 10 A – High range volts, amps: 0 to 20 V, 0 to 2 A- 0 to 50 V, 0 to 0.8 A- 0 to 20 V, 0 to 4 A Programming Accuracy at 25°C ±5°C – Voltage: 0.06% + 19 mV, 50 mV, 19 mV – Current: 0.16% + 50 mA, 20 mA, 100mA Ripple & Noise (20 Hz to 20 MHz) – Voltage rms: 500 µV – Peak-to-peak: 3 mV – Current rms: 1 mA
Datasheet
-
Power Supply
HP-Agilent/Keysight 6012B
These single-output supplies can replace multiple units, saving rack space and reducing system cost and complexity.
Autoranging outputs provide maximum power at a variety of operating points
Overvoltage features protect DUTs quickly and automatically
Auto-parallel or auto-series connections enable greater output flexibility
Ten-turn pots for precise local control1200W, DC System Power Supplies,60V – 50A.
Datasheet -
Load
HP-Agilent/Keysight 60503B
The N3303A 250 Watt Electronic Load Module may not be used in a 6050A or 6051A Electronic Load Mainframe. The N3303A may only be used with a N3300A or N3301A Electronic Load Mainframe.
The Keysight 60503B module along with the dc electronic load mainframe are ideal for the test and evaluation of dc power sources and power components and are well suited for applications in areas such as research and development, production, and incoming inspection. Each module includes programming inputs that allow control of load current via an analog control voltage.
Analog voltage control in constant current mode
Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity. -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers
-
Power Supply
HP-Agilent/Keysight 6281A
The Keysight 6827A power supply/amplifier is a general-purpose instruments useful in laboratories engaged in research and development of electronic systems, circuitry, or components.
High-speed remote programming
Overload protection
Wideband selection
Bipolar voltage
Current sink or source
Output ratings (0 – 55°C): -10 V to +10 V, -100 V to + 100 V; 0 to 0.5A both ranges
Ripple and noise: CV: 10 mV rms, 50 mV peak-to-peak CC: 0.4 mA rms, 5 mA peak-to-peak
Transient recovery: 100 us, 100 mV
Frequency response (+1, -3 dB): dc to 30 kHz fixed gain dc to 15 kHz variable gain
Physical Specifications: Weight: 8.2 kg (18 lb); Size: 198 mm W x 155 mm H x 316 mm D (7.78 in x 6.09 in x 12. 44 in) -
Mainframe
HP-Agilent/Keysight 66000A
The Hp 66000A modular power system simplifies test-system assembly, cabling, programming, debugging and operation. The 66000A is 4 U, 8 slot mainframe that accepts 1 to 8 modules below in any combination. Modules are ordered separately.
Features:High density: eight slots in 7 inches of rack space
Output sequencing
Low ripple and noise
High-accuracy read-back of voltage and current over GPIB
Standard Commands for Programmable Instruments (SCPI)
Optional keyboard and display unit
Serial link to connect two mainframes at one GPIB address
Optional isolation and polarity-reversal relays
Built-in self-test
Datasheet -
Power Supply
HP-Agilent/Keysight 6623A
Agilent high performance DC power supplies offer spec and accuracy for test optimization. The multiple output, 40W – 10 W GPIB 6621A – 6624A and 6627A provide dual-range outputs- fast, low-noise outputs- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. The Agilent 80W, triple-output 6623A is a versatile solution to help improve system accuracy and reduce test time in a 3U high package. Output Ratings – Low-range volts, amps: 0 to 7 V, 0 to 5 A- 0 to 20 V, 0 to 2 A- 0 to 7 V, 0 to 10 A – High range volts, amps: 0 to 20 V, 0 to 2 A- 0 to 50 V, 0 to 0.8 A- 0 to 20 V, 0 to 4 A Programming Accuracy at 25°C ±5°C – Voltage: 0.06% + 19 mV, 50 mV, 19 mV – Current: 0.16% + 50 mA, 20 mA, 100mA Ripple & Noise (20 Hz to 20 MHz) – Voltage rms: 500 µV – Peak-to-peak: 3 mV – Current rms: 1 mA
Datasheet€450.00 View Product