ItalianoLoad
Showing all 3 results
-
Load
HP-Agilent/Keysight 60503B
The N3303A 250 Watt Electronic Load Module may not be used in a 6050A or 6051A Electronic Load Mainframe. The N3303A may only be used with a N3300A or N3301A Electronic Load Mainframe.
The Keysight 60503B module along with the dc electronic load mainframe are ideal for the test and evaluation of dc power sources and power components and are well suited for applications in areas such as research and development, production, and incoming inspection. Each module includes programming inputs that allow control of load current via an analog control voltage.
Analog voltage control in constant current mode
Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity.SKU: n/a -
Load
SPINNER BN537730
SPINNER loads offer outstanding electrical and mechanical properties
The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.
The 200 W load DC-860 MHz 7-16 female is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.
The 200 W load DC-860 MHz 7-16 female ensures optimum protection for your highly sensitive signal transmission between transmitter and antenna on broadcast sites.
Outstanding RF characteristics, best possible passive intermodulation and VSWRThe load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 200 W.
The load offers an interface 7-16 female.
SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.
The 200 W load DC-860 MHz 7-16 female is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.
The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.
SKU: n/a -
Load
SPINNER BN537761
Coaxial Dummy Load Termination 1000 W DC-860 MHz 7-16 female 50OHM
SPINNER loads offer outstanding electrical and mechanical properties
The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.
The 1000 W load DC-860 MHz 7-16 female is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.
The 1000 W load DC-860 MHz 7-16 female ensures optimum protection for your highly sensitive signal transmission between transmitter and antenna on broadcast sites.
Outstanding RF characteristics, best possible passive intermodulation and VSWRThe load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 1000 W.
The load offers an interface 7-16 female.
SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.
The 1000 W load DC-860 MHz 7-16 female is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.
The protection class is IP 40.
The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.
SKU: n/a
-
Load
HP-Agilent/Keysight 60503B
The N3303A 250 Watt Electronic Load Module may not be used in a 6050A or 6051A Electronic Load Mainframe. The N3303A may only be used with a N3300A or N3301A Electronic Load Mainframe.
The Keysight 60503B module along with the dc electronic load mainframe are ideal for the test and evaluation of dc power sources and power components and are well suited for applications in areas such as research and development, production, and incoming inspection. Each module includes programming inputs that allow control of load current via an analog control voltage.
Analog voltage control in constant current mode
Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity. -
Load
SPINNER BN537730
SPINNER loads offer outstanding electrical and mechanical properties
The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.
The 200 W load DC-860 MHz 7-16 female is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.
The 200 W load DC-860 MHz 7-16 female ensures optimum protection for your highly sensitive signal transmission between transmitter and antenna on broadcast sites.
Outstanding RF characteristics, best possible passive intermodulation and VSWRThe load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 200 W.
The load offers an interface 7-16 female.
SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.
The 200 W load DC-860 MHz 7-16 female is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.
The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.
-
Load
SPINNER BN537761
Coaxial Dummy Load Termination 1000 W DC-860 MHz 7-16 female 50OHM
SPINNER loads offer outstanding electrical and mechanical properties
The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.
The 1000 W load DC-860 MHz 7-16 female is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.
The 1000 W load DC-860 MHz 7-16 female ensures optimum protection for your highly sensitive signal transmission between transmitter and antenna on broadcast sites.
Outstanding RF characteristics, best possible passive intermodulation and VSWRThe load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 1000 W.
The load offers an interface 7-16 female.
SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.
The 1000 W load DC-860 MHz 7-16 female is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.
The protection class is IP 40.
The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.
-
Load
HP-Agilent/Keysight 60503B
The N3303A 250 Watt Electronic Load Module may not be used in a 6050A or 6051A Electronic Load Mainframe. The N3303A may only be used with a N3300A or N3301A Electronic Load Mainframe.
The Keysight 60503B module along with the dc electronic load mainframe are ideal for the test and evaluation of dc power sources and power components and are well suited for applications in areas such as research and development, production, and incoming inspection. Each module includes programming inputs that allow control of load current via an analog control voltage.
Analog voltage control in constant current mode
Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity. -
Load
SPINNER BN537730
SPINNER loads offer outstanding electrical and mechanical properties
The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.
The 200 W load DC-860 MHz 7-16 female is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.
The 200 W load DC-860 MHz 7-16 female ensures optimum protection for your highly sensitive signal transmission between transmitter and antenna on broadcast sites.
Outstanding RF characteristics, best possible passive intermodulation and VSWRThe load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 200 W.
The load offers an interface 7-16 female.
SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.
The 200 W load DC-860 MHz 7-16 female is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.
The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.
-
Load
SPINNER BN537761
Coaxial Dummy Load Termination 1000 W DC-860 MHz 7-16 female 50OHM
SPINNER loads offer outstanding electrical and mechanical properties
The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.
The 1000 W load DC-860 MHz 7-16 female is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.
The 1000 W load DC-860 MHz 7-16 female ensures optimum protection for your highly sensitive signal transmission between transmitter and antenna on broadcast sites.
Outstanding RF characteristics, best possible passive intermodulation and VSWRThe load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 1000 W.
The load offers an interface 7-16 female.
SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.
The 1000 W load DC-860 MHz 7-16 female is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.
The protection class is IP 40.
The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.