ItalianoShop
Showing 1171–1200 of 1497 results
-
Electronic Load Module, Lightwave Switch
HP-Agilent/Keysight 86060B
These electronic loads are particularly suited for the lab bench. Entering commands manually using the front panel keypad is simpler because the channel does not need to be specified, as in a mainframe configuration. Extensive protection is included to help protect your valuable prototypes under test. This includes overvoltage, over current, over temperature, overpower, and reverse polarity.
The Keysight 6060B is a 300 W, single output electronic load, ideal for evaluation of DC power sources and power components in bench applications. The 6060B has built-in measurement functions that make it convenient for testing single output applications in areas such as research and development, production, and incoming inspection.
The Keysight 6060B loads are suitable for manufacturing test systems where maximizing speed is not critical. They use industry standard SCPI instructions, and also have VXI Plug & Play drivers to simplify system design. For the greatest speed and accuracy in programming and measurement, see the DC Electronic Loads.
SKU: 399€650.00 View Product -
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave ModulationSKU: 397€0.00 View Product -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers
SKU: 388
-
Electronic Load Module, Lightwave Switch
HP-Agilent/Keysight 86060B
These electronic loads are particularly suited for the lab bench. Entering commands manually using the front panel keypad is simpler because the channel does not need to be specified, as in a mainframe configuration. Extensive protection is included to help protect your valuable prototypes under test. This includes overvoltage, over current, over temperature, overpower, and reverse polarity.
The Keysight 6060B is a 300 W, single output electronic load, ideal for evaluation of DC power sources and power components in bench applications. The 6060B has built-in measurement functions that make it convenient for testing single output applications in areas such as research and development, production, and incoming inspection.
The Keysight 6060B loads are suitable for manufacturing test systems where maximizing speed is not critical. They use industry standard SCPI instructions, and also have VXI Plug & Play drivers to simplify system design. For the greatest speed and accuracy in programming and measurement, see the DC Electronic Loads.
-
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave Modulation -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers
-
Electronic Load Module, Lightwave Switch
HP-Agilent/Keysight 86060B
These electronic loads are particularly suited for the lab bench. Entering commands manually using the front panel keypad is simpler because the channel does not need to be specified, as in a mainframe configuration. Extensive protection is included to help protect your valuable prototypes under test. This includes overvoltage, over current, over temperature, overpower, and reverse polarity.
The Keysight 6060B is a 300 W, single output electronic load, ideal for evaluation of DC power sources and power components in bench applications. The 6060B has built-in measurement functions that make it convenient for testing single output applications in areas such as research and development, production, and incoming inspection.
The Keysight 6060B loads are suitable for manufacturing test systems where maximizing speed is not critical. They use industry standard SCPI instructions, and also have VXI Plug & Play drivers to simplify system design. For the greatest speed and accuracy in programming and measurement, see the DC Electronic Loads.
€650.00 View Product -
Oscillator
HP 8350A Sweep Oscillator
The HP 8350A Sweep Oscillator is a solid-state, swept signal source. This unit can be used with network analyzer systems such as the HP 8410B (Network Analyzer), the HP 8755 (Frequency Response Test Set), and others.
Accepts the 86200 (with adapter) and 83500 series of plug-ins for true versatility. Frequency range is dependent upon plug-in used (sold separately). Mainframe features also include the ability to save & recall up to 9 different front-panel settings! This is a very reliable mainframe that will provide years of quality service.* LCD Display
* Remote Programmable via GPIB
* Different Configuration Options with Different RF Plug-Ins
* 27.8 kHz or 1 kHz Square Wave Modulation€0.00 View Product -
System DC Elettronic Load
HP-Agilent/Keysight 6050A
The Agilent 6050A electronic load mainframe accepts user-installable Agilent load modules for easy system configuration and future reconfiguration. The 6050A holds up to six 60501B, 60502B, and 60503B load modules, or three 60504B and 60507B load modules, allowing up to 1,800 watts of total maximum power. One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. – GPIB control of current, voltage and resistance – GPIB readback of current, voltage, and power – Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate – Full protection from over-current, over-voltage, overpower, over-temperature, and reverse polarity – Electronic calibration – Trigger for external synchronization – Parallel units in constant current mode for higher power – VXI plug & play drivers