ItalianoAnritsu
Showing 1–30 of 64 results
-
Synthesized Sweep Generator
WILTRON ANRITSU 68169B
The Anritsu Wiltron 68169B 40.0 GHz Synthesized Sweep Generator features 10 MHz to 40 GHz analog, step, and manual sweep capability. Output levels to +17 dBm and optional 0.1 Hz resolution. It provides AM and FM via external modulating signals or internal arbitrary waveform generators. The internal generators offer 7 modulating waveforms, including Gaussian noise, as well as user-defined arbitrary waveforms. Pulse modulation parameters can be set externally or by the internal pulse generator. Doublet, triplet, or quadruplet pulses make RADAR blind spot testing easy. Simultaneous synchronized modulations let you set complex signal scenarios across the entire frequency range.
•Frequency Range: 0.01GHz to 40GHz
•Output Power Range: -15dBm to 13dBm
•Power Resolution: 0.01dB
•Output Accuracy: 2dB
•Output Impedance: 50Ohms
•Single Side Band Noise: -96dBc/Hz to -60dBc/Hz
•Internal AM,FM, phase and pulse modulation
•User down-loaded complex modulation
•Self-test, Secure mode, Reset
•Master/slave operation
•360B SS ModeSKU: n/a -
Power Meter
ANRITSU MA2437A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
DatasheetSKU: n/a -
Power Meter, Power Sensor
ANRITSU ML2437A + ANRITSU MA2473A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
The MA2473A is a used 32 GHz 0.1 Watt RF Sensor from Anritsu. Electronic test equipment sensors measure the power of waveforms, such as multi-tone and modulated radiofrequency (RF) waveforms. Sensors gather highly accurate modulation measurements using diode detectors.
Additional Features:Frequency Range 10 MHz – 32 GHz
Dynamic Range -70 to +20
SWR <1.90; 10 - 50 MHz,<1.17; 50 - 150 MHz,<1.12; 0.15 - 2 GHz,<1.22; 2 - 12.4 GHz,<1.25; 12.4 - 18 GHz, <1.35; 18 - 32 GHz,<1.50; 32 - 40 GHz,<1.63; 40 - 50 GHz RF Connector Type K (m) Sensor linearity 1.8%, <18 GHz 2.5%, <40 GHz 3.5%, <50 GHz Rise time-1(ms) <0.004 DatasheetSKU: n/a -
Signal Generator
ANRITSU 69037B
The Anritsu 69037B is a used Synthesized CW Signal Generator. The Anritsu 69037B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. The 69037B offers the highest performance available on the market. The Anritsu 69037B is the leader in lowest phase noise performance.The 68C/69B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. It offers the highest performance available on the market. It is the leader in lowest phase noise performance.
The Anritsu 69037B is a basic signal source that provides accurate outputs over a wide frequency and power range for Local Oscillator duty and other CW applications.Additional Features:
Frequency range: 2 to 20 GHz
Output power without an attenuator: –15 dBm (–20 dBm typical)
Output power with an attenuator: –120 dBm
Output power with an electronic attenuator: –140 dBm
Ultra-low SSB phase noise and spurious
+17 dBm guaranteed leveled power to 20 GHz
<5 ms switching time for <100 MHz sweep steps Digital frequency sweep and digital power sweep Wide dynamic range with accurate output levels Intuitive, menu-driven front panel DatasheetSKU: n/a -
Power Sensor
ANRITSU MA2472A
Anritsu MA2472A Power Sensor, 10 MHz to 18 GHz, -70 dBm to +20 dBm
The Anritsu MA2472A is a Standard Diode Sensor designed for use with the ML2430, ML2480 and ML2490 series power meters. They are designed for high dynamic range, high accuracy CW and TDMA measurements. These power sensors have 90 dB dynamic range and linearity better than 1.8% making them the choice for precision measurements. The 4 µs rise time of these sensors is fast enough for power measurements on GSM and similar TDMA systems that use GMSK modulation.
Features:Frequency Range: 10 MHz to 18 GHz
Dynamic Range: -70 to +20 dBm
Rise Time: <0.004 ms Sensor linearity: 1.8%, <18 GHz Temperature accuracy (5 to 50 degrees C.): <1.0% RF connector: N(m) Shipping weight: 2 lb; Size: 73 mm x 52 mm x 29 mm DatasheetSKU: n/a -
Spectrum Analyzer
ANRITSU MS2711B
The Anritsu MS2711 hand held spectrum analyzer is designed for field environments and applications requiring mobility, the MS2711 features easy-to-use, accurate performance in a light weight, battery operated unit covering the 100 kHz to 3000 MHz frequency range. Ideal for field/mobility use, the Anritsu MS2711 satisfies spectrum analysis needs in cellular, DCS/PCS, paging/messaging, WLAN/WPBX, and many other communications system applications – anywhere, anytime.
Utilizing an advanced synthesizer-based design, the MS2711 delivers accurate, reliable, and repeatable measurements – anywhere, every time. A broad range of functions, coupled with resolution bandwidths ranging from 10 kHz to 1 MHz, simplifies identification of interfering signals in modern wireless systems. Rugged packaging keeps the Anritsu MS2711 operating in harsh environments and allows it to withstand rough handling.
Additional Features:
Frequency range: 100 kHz-3.0 GHz
Lightweight
Synthesized-based performance
Full range of marker capabilities including peak, center, and delta functions
Limit lines for quick, simple pass/fail measurements
Rugged, reliable packaging
Large, high resolution VGA display (640×480)
Tracking generator optional (please consult your sales representative for availablity)
Power monitor option
Direct printer control via RS232 serial port
Operation using a 12 .5 VDC source AC-DC adapter or automotive cigarette lighter adapter, which simultaneously charges the battery
Field replaceable battery
Data storage and memory
Store up to ten test setups and 200 measurement traces in non-volatile memory
Stored data is easily and quickly downloaded to a personal computer (PC) or printer
Powerful trace management
Supports long file names for descriptive labelingSKU: 903
-
Synthesized Sweep Generator
WILTRON ANRITSU 68169B
The Anritsu Wiltron 68169B 40.0 GHz Synthesized Sweep Generator features 10 MHz to 40 GHz analog, step, and manual sweep capability. Output levels to +17 dBm and optional 0.1 Hz resolution. It provides AM and FM via external modulating signals or internal arbitrary waveform generators. The internal generators offer 7 modulating waveforms, including Gaussian noise, as well as user-defined arbitrary waveforms. Pulse modulation parameters can be set externally or by the internal pulse generator. Doublet, triplet, or quadruplet pulses make RADAR blind spot testing easy. Simultaneous synchronized modulations let you set complex signal scenarios across the entire frequency range.
•Frequency Range: 0.01GHz to 40GHz
•Output Power Range: -15dBm to 13dBm
•Power Resolution: 0.01dB
•Output Accuracy: 2dB
•Output Impedance: 50Ohms
•Single Side Band Noise: -96dBc/Hz to -60dBc/Hz
•Internal AM,FM, phase and pulse modulation
•User down-loaded complex modulation
•Self-test, Secure mode, Reset
•Master/slave operation
•360B SS Mode -
Power Meter
ANRITSU MA2437A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
Datasheet -
Power Meter, Power Sensor
ANRITSU ML2437A + ANRITSU MA2473A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
The MA2473A is a used 32 GHz 0.1 Watt RF Sensor from Anritsu. Electronic test equipment sensors measure the power of waveforms, such as multi-tone and modulated radiofrequency (RF) waveforms. Sensors gather highly accurate modulation measurements using diode detectors.
Additional Features:Frequency Range 10 MHz – 32 GHz
Dynamic Range -70 to +20
SWR <1.90; 10 - 50 MHz,<1.17; 50 - 150 MHz,<1.12; 0.15 - 2 GHz,<1.22; 2 - 12.4 GHz,<1.25; 12.4 - 18 GHz, <1.35; 18 - 32 GHz,<1.50; 32 - 40 GHz,<1.63; 40 - 50 GHz RF Connector Type K (m) Sensor linearity 1.8%, <18 GHz 2.5%, <40 GHz 3.5%, <50 GHz Rise time-1(ms) <0.004 Datasheet -
Signal Generator
ANRITSU 69037B
The Anritsu 69037B is a used Synthesized CW Signal Generator. The Anritsu 69037B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. The 69037B offers the highest performance available on the market. The Anritsu 69037B is the leader in lowest phase noise performance.The 68C/69B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. It offers the highest performance available on the market. It is the leader in lowest phase noise performance.
The Anritsu 69037B is a basic signal source that provides accurate outputs over a wide frequency and power range for Local Oscillator duty and other CW applications.Additional Features:
Frequency range: 2 to 20 GHz
Output power without an attenuator: –15 dBm (–20 dBm typical)
Output power with an attenuator: –120 dBm
Output power with an electronic attenuator: –140 dBm
Ultra-low SSB phase noise and spurious
+17 dBm guaranteed leveled power to 20 GHz
<5 ms switching time for <100 MHz sweep steps Digital frequency sweep and digital power sweep Wide dynamic range with accurate output levels Intuitive, menu-driven front panel Datasheet -
Power Sensor
ANRITSU MA2472A
Anritsu MA2472A Power Sensor, 10 MHz to 18 GHz, -70 dBm to +20 dBm
The Anritsu MA2472A is a Standard Diode Sensor designed for use with the ML2430, ML2480 and ML2490 series power meters. They are designed for high dynamic range, high accuracy CW and TDMA measurements. These power sensors have 90 dB dynamic range and linearity better than 1.8% making them the choice for precision measurements. The 4 µs rise time of these sensors is fast enough for power measurements on GSM and similar TDMA systems that use GMSK modulation.
Features:Frequency Range: 10 MHz to 18 GHz
Dynamic Range: -70 to +20 dBm
Rise Time: <0.004 ms Sensor linearity: 1.8%, <18 GHz Temperature accuracy (5 to 50 degrees C.): <1.0% RF connector: N(m) Shipping weight: 2 lb; Size: 73 mm x 52 mm x 29 mm Datasheet -
Spectrum Analyzer
ANRITSU MS2711B
The Anritsu MS2711 hand held spectrum analyzer is designed for field environments and applications requiring mobility, the MS2711 features easy-to-use, accurate performance in a light weight, battery operated unit covering the 100 kHz to 3000 MHz frequency range. Ideal for field/mobility use, the Anritsu MS2711 satisfies spectrum analysis needs in cellular, DCS/PCS, paging/messaging, WLAN/WPBX, and many other communications system applications – anywhere, anytime.
Utilizing an advanced synthesizer-based design, the MS2711 delivers accurate, reliable, and repeatable measurements – anywhere, every time. A broad range of functions, coupled with resolution bandwidths ranging from 10 kHz to 1 MHz, simplifies identification of interfering signals in modern wireless systems. Rugged packaging keeps the Anritsu MS2711 operating in harsh environments and allows it to withstand rough handling.
Additional Features:
Frequency range: 100 kHz-3.0 GHz
Lightweight
Synthesized-based performance
Full range of marker capabilities including peak, center, and delta functions
Limit lines for quick, simple pass/fail measurements
Rugged, reliable packaging
Large, high resolution VGA display (640×480)
Tracking generator optional (please consult your sales representative for availablity)
Power monitor option
Direct printer control via RS232 serial port
Operation using a 12 .5 VDC source AC-DC adapter or automotive cigarette lighter adapter, which simultaneously charges the battery
Field replaceable battery
Data storage and memory
Store up to ten test setups and 200 measurement traces in non-volatile memory
Stored data is easily and quickly downloaded to a personal computer (PC) or printer
Powerful trace management
Supports long file names for descriptive labeling
-
Synthesized Sweep Generator
WILTRON ANRITSU 68169B
The Anritsu Wiltron 68169B 40.0 GHz Synthesized Sweep Generator features 10 MHz to 40 GHz analog, step, and manual sweep capability. Output levels to +17 dBm and optional 0.1 Hz resolution. It provides AM and FM via external modulating signals or internal arbitrary waveform generators. The internal generators offer 7 modulating waveforms, including Gaussian noise, as well as user-defined arbitrary waveforms. Pulse modulation parameters can be set externally or by the internal pulse generator. Doublet, triplet, or quadruplet pulses make RADAR blind spot testing easy. Simultaneous synchronized modulations let you set complex signal scenarios across the entire frequency range.
•Frequency Range: 0.01GHz to 40GHz
•Output Power Range: -15dBm to 13dBm
•Power Resolution: 0.01dB
•Output Accuracy: 2dB
•Output Impedance: 50Ohms
•Single Side Band Noise: -96dBc/Hz to -60dBc/Hz
•Internal AM,FM, phase and pulse modulation
•User down-loaded complex modulation
•Self-test, Secure mode, Reset
•Master/slave operation
•360B SS Mode -
Power Meter
ANRITSU MA2437A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
Datasheet -
Power Meter, Power Sensor
ANRITSU ML2437A + ANRITSU MA2473A
The ML2437A Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. This meter includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring laboratory quality accuracy to field service applications. ML2437A has one input.
The MA2473A is a used 32 GHz 0.1 Watt RF Sensor from Anritsu. Electronic test equipment sensors measure the power of waveforms, such as multi-tone and modulated radiofrequency (RF) waveforms. Sensors gather highly accurate modulation measurements using diode detectors.
Additional Features:Frequency Range 10 MHz – 32 GHz
Dynamic Range -70 to +20
SWR <1.90; 10 - 50 MHz,<1.17; 50 - 150 MHz,<1.12; 0.15 - 2 GHz,<1.22; 2 - 12.4 GHz,<1.25; 12.4 - 18 GHz, <1.35; 18 - 32 GHz,<1.50; 32 - 40 GHz,<1.63; 40 - 50 GHz RF Connector Type K (m) Sensor linearity 1.8%, <18 GHz 2.5%, <40 GHz 3.5%, <50 GHz Rise time-1(ms) <0.004 Datasheet -
Signal Generator
ANRITSU 69037B
The Anritsu 69037B is a used Synthesized CW Signal Generator. The Anritsu 69037B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. The 69037B offers the highest performance available on the market. The Anritsu 69037B is the leader in lowest phase noise performance.The 68C/69B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. It offers the highest performance available on the market. It is the leader in lowest phase noise performance.
The Anritsu 69037B is a basic signal source that provides accurate outputs over a wide frequency and power range for Local Oscillator duty and other CW applications.Additional Features:
Frequency range: 2 to 20 GHz
Output power without an attenuator: –15 dBm (–20 dBm typical)
Output power with an attenuator: –120 dBm
Output power with an electronic attenuator: –140 dBm
Ultra-low SSB phase noise and spurious
+17 dBm guaranteed leveled power to 20 GHz
<5 ms switching time for <100 MHz sweep steps Digital frequency sweep and digital power sweep Wide dynamic range with accurate output levels Intuitive, menu-driven front panel Datasheet -
Power Sensor
ANRITSU MA2472A
Anritsu MA2472A Power Sensor, 10 MHz to 18 GHz, -70 dBm to +20 dBm
The Anritsu MA2472A is a Standard Diode Sensor designed for use with the ML2430, ML2480 and ML2490 series power meters. They are designed for high dynamic range, high accuracy CW and TDMA measurements. These power sensors have 90 dB dynamic range and linearity better than 1.8% making them the choice for precision measurements. The 4 µs rise time of these sensors is fast enough for power measurements on GSM and similar TDMA systems that use GMSK modulation.
Features:Frequency Range: 10 MHz to 18 GHz
Dynamic Range: -70 to +20 dBm
Rise Time: <0.004 ms Sensor linearity: 1.8%, <18 GHz Temperature accuracy (5 to 50 degrees C.): <1.0% RF connector: N(m) Shipping weight: 2 lb; Size: 73 mm x 52 mm x 29 mm Datasheet -
Spectrum Analyzer
ANRITSU MS2711B
The Anritsu MS2711 hand held spectrum analyzer is designed for field environments and applications requiring mobility, the MS2711 features easy-to-use, accurate performance in a light weight, battery operated unit covering the 100 kHz to 3000 MHz frequency range. Ideal for field/mobility use, the Anritsu MS2711 satisfies spectrum analysis needs in cellular, DCS/PCS, paging/messaging, WLAN/WPBX, and many other communications system applications – anywhere, anytime.
Utilizing an advanced synthesizer-based design, the MS2711 delivers accurate, reliable, and repeatable measurements – anywhere, every time. A broad range of functions, coupled with resolution bandwidths ranging from 10 kHz to 1 MHz, simplifies identification of interfering signals in modern wireless systems. Rugged packaging keeps the Anritsu MS2711 operating in harsh environments and allows it to withstand rough handling.
Additional Features:
Frequency range: 100 kHz-3.0 GHz
Lightweight
Synthesized-based performance
Full range of marker capabilities including peak, center, and delta functions
Limit lines for quick, simple pass/fail measurements
Rugged, reliable packaging
Large, high resolution VGA display (640×480)
Tracking generator optional (please consult your sales representative for availablity)
Power monitor option
Direct printer control via RS232 serial port
Operation using a 12 .5 VDC source AC-DC adapter or automotive cigarette lighter adapter, which simultaneously charges the battery
Field replaceable battery
Data storage and memory
Store up to ten test setups and 200 measurement traces in non-volatile memory
Stored data is easily and quickly downloaded to a personal computer (PC) or printer
Powerful trace management
Supports long file names for descriptive labeling