Shop
Showing 1171–1200 of 1373 results
-
-
-
-
-
-
-
-
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065
€7,695.00€8,595.00View Product -
-
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
RSA3000 SERIES
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements availableSKU: n/a€3,395.00€4,195.00View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements availableSKU: n/a€4,295.00€4,995.00View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
DatasheetSKU: n/a€2,999.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
he Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements availableSKU: n/a€2,999.00€3,199.00View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E-TG
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz with Tracking Generator.
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
DatasheetSKU: n/a€3,399.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
DatasheetSKU: n/a€5,007.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements availableSKU: n/a€4,395.00€5,195.00View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements availableSKU: n/a€5,495.00€6,195.00View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
DatasheetSKU: n/a€6,185.00 View Product -
Spectrum Analyzer
RIGOL RSA5032
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1” capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Scheda TecnicaSKU: n/a€5,995.00€6,895.00View Product -
Spectrum Analyzer
RIGOL RSA5032-TG
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.9 kHz to 3.2 or 6.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
1 Hz Minimum Resolution Bandwidth (RBW)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available
DatasheetSKU: n/a€6,995.00€7,895.00View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5032N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
SKU: n/a€7,890.00 View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.- 9 kHz to 3.2 or 6.5 GHz Frequency Range
- 10.1” Capacitive touchscreen display
- Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
- Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
- Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
- 7 Real-Time visualization modes
- 100 % POI as low as 7. 45 µs
- 1 Hz Minimum Resolution Bandwidth (RBW)
- 1 ms full span sweep speed
- EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
- Tracking Generator and VSWR measurements available
SKU: n/a€7,695.00€8,595.00View Product -
Spectrum Analyzer
RIGOL RSA5065-TG
Per tutti i nuovi ordini di versioni RSA5000 (-TG) forniamo gratuitamente una larghezza di banda in tempo reale di 40 MHz e opzione preamplificatore (RSA5000-B40 e RSA5000-PA)
Gli ingegneri che integrano WiFi, Bluetooth e altre moderne tecnologie RF devono affrontare sfide complesse come i segnali di salto di frequenza, i conflitti di canale e le interferenze dello spettro. Gli analizzatori di spettro in tempo reale apportano la dimensione del tempo all'analisi RF semplificando il monitoraggio e la caratterizzazione di questi complessi sistemi RF. RSA5000 combina prestazioni in tempo reale leader del settore (POI da 7.45μs 100%), display con dati avanzati e opzioni di trigger avanzate che consentono all'utente di acquisire, identificare e analizzare rapidamente questi eventi complessi.
La serie Rigol RSA5000 è una serie di analizzatori di spettro compatti e leggeri con eccellenti capacità di analisi dello spettro standard combinate con un analizzatore di spettro in tempo reale che consente di non perdere alcun segnale di durata superiore a 7,45 μs.
La larghezza di banda in tempo reale di 25 MHz (40 MHz opzionale) e il Trigger della maschera di frequenza consentono di visualizzare, isolare e acquisire segnali per analizzare il loro comportamento su ampiezza, frequenza e tempo.
Questi analizzatori di spettro ridefiniscono la categoria di prodotti dell'analizzatore di spettro per uso generico aggiungendo funzionalità di trigger e analisi dello spettro in tempo reale e stabiliscono un nuovo livello di prestazioni e prezzo. La famiglia RSA5000 è dotata di display touchscreen da 10,1 “, design compatto e interfaccia e operazioni facili da usare, che lo rendono ideale per applicazioni da banco o da campo nei test e produzione RF e wireless come IoT, RFID, segnali modulati analogici e digitali. Embedded-System-Designer può attraversare trigger e analizzare segnali di bus come IC2, SPI con segnali RF.Intervallo di frequenze da 9 kHz a 3.2 o 6.5 GHz
Display touchscreen capacitivo da 10,1 “
Livello medio di rumore visualizzato fino a -165 dBm con opt. preamplificatore
Analisi in tempo reale Larghezza di banda dello standard 25 MHz (opzione 40 MHz)
Trigger di frequenza maschera, trigger di livello di potenza IF e trigger esterno
7 modalità di visualizzazione in tempo reale
100% POI a partire da 7. 45 μs
Larghezza di banda minima risoluzione 1 Hz (RBW)
Velocità di scansione a span intera 1 ms
Standard EMI RBW e rivelatore (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Disponibili le misure di monitoraggio del generatore e del VSWR
Scheda TecnicaSKU: n/a€8,695.00€9,595.00View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
DatasheetSKU: n/a€9,564.00 View Product -
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD55
The R&S CMD55 is capable of testing GSM1800 (formerly named PCN orDCS1800) and GSM1900 (formerly named PCS or DCS1900) mobile phones. This model combines small dimensions with high measurement accuracy and speed. The testers range of capabilities includes all signaling, generator and measurement functions required for verifying the correct operation of the DUT (Device Under Test).
Thanks to its fast go/nogo tests and accurate analysis using optional extensions, the CMD55 is equally well suited for R&D, production and high-end service and production. Based on the wide-range know-how of Rohde & Schwarz in digital radiocommunication testing, which not least was obtained in developing type-approval test systems such as the GSM900 and GSM1800 system simulators, the CMD model is a top-grade tester for present and future measurement applications.
Additional Features:
Mobile-to-base station synchronization
Location update
Incoming call setup
Outgoing call setup
Mobile power level control
Handover (channel change, timeslot change)
Dual-band handover
Peak power measurement
SACCH measurement (eg RxLev, RxQual, power level)
Echo test
Call clearing by mobile
Call clearing by network
DC current/voltage measurement
Phase and frequency error measurement
Measurement of power ramp as a function of time
Bit-error rate (BER) measurementSKU: n/a -
Senza categoria
Rohde & Schwarz CMD57 Digital RadioCommunication Tester
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress.SKU: n/a -
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD60
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress.
The Rohde & Schwarz CMD60 addresses all aspects of test and measurement applications from production and service to development and quality assurance. It comes equipped with remote control via IEEE488/IEC625 bus + RS232, automated regression and stress testing of DUT, and automatic go/no go testing of fixed and portable part.Additional Features:
High production output at low investment for test equipment
The R&S® CMD60 can be remote controlled via IEC/IEEE-bus interface using SCPI-compatible commands.
Comprehensive test capabilities implemented in one single unit.
Comprehensive in-depth measurements based on ETSI Rec. CTR06
Automatic regression and stress tests
The tester supplies a great number of DECT-specific signals such as bit clock, TX/RX enable, to control the module under test
Comprehensive audio tests
Ergonomic user interface and relaxed manual operation due to a large bright LCD (requires noDECT-specific knowledge) strictly separated from the expert user interface for configuration
Integrated tools such as a scope display for power and FM demodulation versus time ease troubleshootingSKU: n/a -
Rohde & Schwarz ESHS10
R&S ESHS10 EMI Test Receivers, 10: 9 kHz to 30 MHz
The receivers ESHS 10 is suitables for measuring electromagnetic interference in line with commercial standards:
• CISPR16, VDE0876 and ANSI C63.2
• EN55011 to 55022, ETS, FCC, VCCI and VDE 0871 to 0879 and ANSI C63.4The instruments are ideal for routine tasks in industry such as development and approval tests in line with commercial standards. Featuring mains-independent battery powering, they are also suitable for mobile applications at EMC service providers, test houses and safety standard authorities.
Superior circuit design
• High measurement accuracy, typical error 0.5 dB
• Wide dynamic range, typical noise figure 7 dB with preamplifier, third-order intercept point 20 dBm (without preamplifier)
• Calibrated attenuator with high pulse loading capacity, switchable in 10-dB steps from 0 to 120 dB
• Comprehensive preselection filters
• Switchable preamplifier with wide dynamic range
• Crystal-stabilized, fast synthesizer with high resolution and sweep mode for fast frequency scanning
• High-level mixer with high oscillator rejection
• Delay-equalized IF filtersDemodulation
• Parallel detectors for average, peak and quasi-peak indication
• 60 dB operating range also for quasipeak and average value indication
• Highly linear envelope detector with more than 70 dB dynamic range
• AM and A0 demodulators (ESVS also FM)
• Logarithmic amplifier with more than 70 dB dynamic range
• Peak indication with automatic consideration of IF bandwidth correction values for broadband interference measurements
• Automatic overload detection in mixer stages and in test channel by permanently activated peak detectorsPowerful processor system
• Manual operation or internal or external processor control
• Flash EPROMs for convenient and fast firmware update through PC
• Macros for automatic and semiautomatic test runs
• Automatic level calibration
• Automatic consideration of frequencydependent transducer factors
• All built-in functions fully programmable via IEC/IEE bus
• Fast measurement in external trigger mode; output of up to 5000 values/s via IEC/IEEE bus, up to 400 values/s including frequency change within certain frequency bands
• 12-bit A/D converter with short conversion time, measurement time selectable between 1 ms and 100 s
• High measurement accuracy thanks to automatic total calibration
• Automatic monitoring of all synthesizer loops and supply voltages during operationOptimum result display and printout
• Measurement of voltage, field strength, current and pulse spectral density with display of relevant units
• Indication of result on analog meter or digital display with 0.1 dB resolution
• Output of results as lists and diagrams on printer including limit linesFurther features
• Digital level indication on LCD and analog level indication on moving-coil meter taking into account transducer factors and their units
• Numerous interfaces for driving or feeding additional devices
• AC supply as well as battery powering for mobile applications
DatasheetSKU: n/a -
Power Meter
ROHDE & SCHWARZ NRVS
Uncompromizing technology and
ease of operation make the NRVS an
ideal instrument for any kind of power
measurement in manifold laboratory
and system applications. Thanks to its
unique measuring heads with calibra-
tion data memory and temperature
sensor, which make adjustments by
the user superfluous, the NRVS meas-
ures at all times with high accuracy
and free of operator’s errors.
The range of measuring heads includes thermal power sensors as well as highly sensitive diode power sensors, peak power
sensors, probes and insertion units for voltage measurements. The NRVS covers a power span from 100 pW up to the
kW range. In addition to the power sensors, all voltage probes of the URV5-Z series can be used.
DatasheetSKU: n/a -
Open Switch and Control Platform
ROHDE & SCHWARZ OSP150
The modular R&S OSP open switch and control platform can be used to perform RF switch and control tasks.
* Compact size requiring little space
* Optimal configuration by selecting the appropriate switch and control modules
* Plug & play makes complex installation superfluous
* three module slots on the back and two on the front
* Electromechanical RF relays DC to 67 GHz
* RF solid-state relays (SSR) 9 kHz to 10 GHz
* Digital I/O and multiplexer modules
* Special switch and control modules
DatasheetSKU: n/a -
Signal Generator
ROHDE & SCHWARZ SML03
he RSSML signal generators offer all the functionalities of a state-of-the-art, general-purpose signal generators: wide frequency range, large variety of modulation functions and high reliability, at an extremely attractive price. It is ideal as a flexible signal source in automatic test systems in development, servicing or production.
FEATURESSSB phase noise: <- 122 dBc (1Hz) (at f=1GHZ, .f - 20kHz) High level accuracy (deviation – 120 dBm)
High reliability through electronic attenuator
Digital frequency and level sweep
Precise DC-coupled FM enables usage as accurage VCO
Optional pulse modulator with integrated pulse generator
Three year calibration cycle
Unit Size: 427 mm high x 88 mm wide x 450 mm deep ; < 8.5 kg. DatasheetSKU: n/a -
VIDEO TEST SIGNAL GENERATOR
ROHDE & SCHWARZ SPF2
The R&S SPF2 Video Test Signal Generator produces all the video signals for TV measurements in accordance with exisiing standards or with special waveforms and amplitudes and inserts these as test lines into the program signal.
The composite colour video signal (CCVS) for full-field measurements can have standard levels or the amplitudes of the individual signal components, such as sync pulse, picture component and composite (colour) video, can be adjusted.
The SPF2 combines a number of instrument functions: video signa l generator, test signal generator, noise generator, VTR test signal generator and test signal inserter.
* Standards B/G, D, H, I (PAL) and M (NTSC)
* Video signal generator
* Noise Generator
* VTR test signal generator
* Test signal generator
* Test signal inserterSKU: n/a -
ROHDE & SCWARZ CMS52
ROHDE & SCWARZ CMS52 RADIOCOMMUNICATION SERVICE MONITOR 0.4 to 1000 MHz
Options included:
B1/B2 > OCXO
B39 > Transf., Contr., Interf.
B59 > DuplexThe CMS radiocommunication service monitor is the ideal radio tester for use in service, maintenance, and test departments. It is suitable for all transceivers using AM, FM or, jM as well as SSB.
Optional extensions enable the CMS to satisfy all requirements of radio measurements and even to cover related fields.
Low weight, compact size, and low power consumption make this instrument particularly suitable for mobile use. Whether stationary or mobile, the CMS with its extensive test facilities always provides a valuable service.
The CMS uses a high-contrast, backlit LCD screen with high resolution and is operated via softkeys. A clear menu structure allows fast and direct access to all measurement facilities.
With the autorun control and printer interface, automatic test routines can easily be configured and stored via the front-panel keypad. Tolerances can be inserted into these test routines to determine and log pass/fail limits.
Battery-backed memory cards are used as program and test report library. Test reports, program lists, and screen hardcopies can be output on a printer.
The CMS is a rugged and handy unit that is particularly suitable for mobile use. It can be supplied from the local DC voltage (long operating times due to low power consumption). The results of the automatic transceiver test can be stored on a memory card for later analysis and printout.
The CMS offers great benefits to the development engineer: In a minimum of space it combines RF and AF generators as well as analyzers with high accuracy and wide dynamic range.
Due to the comprehensive standard configuration of the individual ¸CMS models and the optional extensions tailored to specific applications, additional external measuring instruments are not required.
Signal sources
• RF synthesizer from 0.4 MHz to 1000 MHz, resolution 10 Hz, with AM, FM, jM, and multitone modulation capabilities
• Two independent modulation generators, 20 Hz to 30 kHz each, resolution 0.1 Hz
• Selective-call coder for all standards (also user-programmable)
• CDCSS coder
• DTMF coder
• 10 MHz reference frequency input/output
• VOR/ILS signal generatorMeasuring facilities
• RF frequency counter, RF frequencyoffset counter
• RF power meter from 1 mW to 100 W
• Selective RF power meter down to –100 dBm
• RF spectrum monitor with wide dynamic range and filters that also allow modulation analysis (AM, FM, SSB)
• Tracking generator in frequency range from 400 kHz to 1000 MHz
• Adjacent-channel power meter with standard ETSI filters
• Modulation meter for AM, FM, and jM; detectors: +PK, –PK, PK HOLD, ±PK/2, RMS, RMS √2
• Duplex modulation meter for duplex spacings of any size
• AF voltmeter with peak and true RMS weighting
• SINAD meter with variable test frequency
• S/N meter
• Distortion meter with variable test frequency
• AF frequency counter with period and gate-time counting
• Selective-call decoder for all standards (also user-programmable)
• DTMF decoder
• Oscilloscope
• DC ammeter/voltmeter T
• ransient recorder for analysis of power and frequency transients
• SSB menus
• Harmonic measurements
• Cable fault finder
DatasheetSKU: n/a -
Power Supply
SORENSEN DCS8-125
Programmable POWER SUPPLY 0-8 VOLTS 0-125 AMPS.
he DCS80-125 is a 1000 Watt DC Power Supply from Sorensen. Supplies DC voltage and current to test, design, and troubleshoot electric and electronic circuits.
This unit has a 8V and 125A.
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies utilize switch-mode technology to achieve high power density in a low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits. This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation.
The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/ local programming and preview status of voltage, current and OVP setpoints.
DatasheetSKU: n/a -
Power Supply
SORENSEN DCS80-13
Programmable POWER SUPPLY 0-80 VOLTS 0-13 AMPS
The DCS80-13E is a 1000 Watt DC Power Supply from Sorensen. Supplies DC voltage and current to test, design, and troubleshoot electric and electronic circuits.
This unit has a 80V and 13A.
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies utilize switch-mode technology to achieve high power density in a low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits. This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation.
The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/ local programming and preview status of voltage, current and OVP setpoints.
DatasheetSKU: n/a -
Power Supply
TDK-Lambda GEN-60-40-1P230
Programmable Lab Power Supply 0-60 V DC 0-40 A
This 2400 W lab power supply sets new standards. They are currently the most powerful 1 HU lab power supplies on the market. Another advantage is that you can stack one device on top of another which means that it needs no air slit either above or below and can actually get by on 1 HU.
Output voltages of up to 60 V and output currents of up to 40 A can be adjusted directly on the device or remotely via the built-in RS232/RS485 interface. All important functions can also be programmed via analogue inputs (control voltage 0 5V, 0-10V, control current 4-20 mA or via external resistor; relevant drivers are available for the digital control e.g., via LabView and LabWindows). High-resolution 16-bit A/D and D/A converters enable very precise settings and programming; the dial controls on the device can be switched between coarse and fine adjustment.
A dual digital display shows the current values, and various status information (andOver Voltage Protection, Under Voltage Limit, overload mode, address settings again), and a monitor output provides corresponding analog voltages (0 – 5 V or 0 – 10 V) for an external monitoring The device can naturally be operated as a constant voltage as well as a constant current source and can, if necessary, automatically switch between these operating modes. Several devices can be switched serially or in parallel. This GEN/H model is half the structural shape of 19″ racks.
DatasheetSKU: n/a
-
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
RSA3000 SERIES
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
he Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E-TG
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz with Tracking Generator.
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
Datasheet -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
Datasheet -
Spectrum Analyzer
RIGOL RSA5032
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1” capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Scheda Tecnica -
Spectrum Analyzer
RIGOL RSA5032-TG
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.9 kHz to 3.2 or 6.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
1 Hz Minimum Resolution Bandwidth (RBW)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available
Datasheet -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5032N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
-
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.- 9 kHz to 3.2 or 6.5 GHz Frequency Range
- 10.1” Capacitive touchscreen display
- Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
- Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
- Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
- 7 Real-Time visualization modes
- 100 % POI as low as 7. 45 µs
- 1 Hz Minimum Resolution Bandwidth (RBW)
- 1 ms full span sweep speed
- EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
- Tracking Generator and VSWR measurements available
-
Spectrum Analyzer
RIGOL RSA5065-TG
Per tutti i nuovi ordini di versioni RSA5000 (-TG) forniamo gratuitamente una larghezza di banda in tempo reale di 40 MHz e opzione preamplificatore (RSA5000-B40 e RSA5000-PA)
Gli ingegneri che integrano WiFi, Bluetooth e altre moderne tecnologie RF devono affrontare sfide complesse come i segnali di salto di frequenza, i conflitti di canale e le interferenze dello spettro. Gli analizzatori di spettro in tempo reale apportano la dimensione del tempo all'analisi RF semplificando il monitoraggio e la caratterizzazione di questi complessi sistemi RF. RSA5000 combina prestazioni in tempo reale leader del settore (POI da 7.45μs 100%), display con dati avanzati e opzioni di trigger avanzate che consentono all'utente di acquisire, identificare e analizzare rapidamente questi eventi complessi.
La serie Rigol RSA5000 è una serie di analizzatori di spettro compatti e leggeri con eccellenti capacità di analisi dello spettro standard combinate con un analizzatore di spettro in tempo reale che consente di non perdere alcun segnale di durata superiore a 7,45 μs.
La larghezza di banda in tempo reale di 25 MHz (40 MHz opzionale) e il Trigger della maschera di frequenza consentono di visualizzare, isolare e acquisire segnali per analizzare il loro comportamento su ampiezza, frequenza e tempo.
Questi analizzatori di spettro ridefiniscono la categoria di prodotti dell'analizzatore di spettro per uso generico aggiungendo funzionalità di trigger e analisi dello spettro in tempo reale e stabiliscono un nuovo livello di prestazioni e prezzo. La famiglia RSA5000 è dotata di display touchscreen da 10,1 “, design compatto e interfaccia e operazioni facili da usare, che lo rendono ideale per applicazioni da banco o da campo nei test e produzione RF e wireless come IoT, RFID, segnali modulati analogici e digitali. Embedded-System-Designer può attraversare trigger e analizzare segnali di bus come IC2, SPI con segnali RF.Intervallo di frequenze da 9 kHz a 3.2 o 6.5 GHz
Display touchscreen capacitivo da 10,1 “
Livello medio di rumore visualizzato fino a -165 dBm con opt. preamplificatore
Analisi in tempo reale Larghezza di banda dello standard 25 MHz (opzione 40 MHz)
Trigger di frequenza maschera, trigger di livello di potenza IF e trigger esterno
7 modalità di visualizzazione in tempo reale
100% POI a partire da 7. 45 μs
Larghezza di banda minima risoluzione 1 Hz (RBW)
Velocità di scansione a span intera 1 ms
Standard EMI RBW e rivelatore (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Disponibili le misure di monitoraggio del generatore e del VSWR
Scheda Tecnica -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Datasheet -
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD55
The R&S CMD55 is capable of testing GSM1800 (formerly named PCN orDCS1800) and GSM1900 (formerly named PCS or DCS1900) mobile phones. This model combines small dimensions with high measurement accuracy and speed. The testers range of capabilities includes all signaling, generator and measurement functions required for verifying the correct operation of the DUT (Device Under Test).
Thanks to its fast go/nogo tests and accurate analysis using optional extensions, the CMD55 is equally well suited for R&D, production and high-end service and production. Based on the wide-range know-how of Rohde & Schwarz in digital radiocommunication testing, which not least was obtained in developing type-approval test systems such as the GSM900 and GSM1800 system simulators, the CMD model is a top-grade tester for present and future measurement applications.
Additional Features:
Mobile-to-base station synchronization
Location update
Incoming call setup
Outgoing call setup
Mobile power level control
Handover (channel change, timeslot change)
Dual-band handover
Peak power measurement
SACCH measurement (eg RxLev, RxQual, power level)
Echo test
Call clearing by mobile
Call clearing by network
DC current/voltage measurement
Phase and frequency error measurement
Measurement of power ramp as a function of time
Bit-error rate (BER) measurement -
Senza categoria
Rohde & Schwarz CMD57 Digital RadioCommunication Tester
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress. -
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD60
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress.
The Rohde & Schwarz CMD60 addresses all aspects of test and measurement applications from production and service to development and quality assurance. It comes equipped with remote control via IEEE488/IEC625 bus + RS232, automated regression and stress testing of DUT, and automatic go/no go testing of fixed and portable part.Additional Features:
High production output at low investment for test equipment
The R&S® CMD60 can be remote controlled via IEC/IEEE-bus interface using SCPI-compatible commands.
Comprehensive test capabilities implemented in one single unit.
Comprehensive in-depth measurements based on ETSI Rec. CTR06
Automatic regression and stress tests
The tester supplies a great number of DECT-specific signals such as bit clock, TX/RX enable, to control the module under test
Comprehensive audio tests
Ergonomic user interface and relaxed manual operation due to a large bright LCD (requires noDECT-specific knowledge) strictly separated from the expert user interface for configuration
Integrated tools such as a scope display for power and FM demodulation versus time ease troubleshooting -
Rohde & Schwarz ESHS10
R&S ESHS10 EMI Test Receivers, 10: 9 kHz to 30 MHz
The receivers ESHS 10 is suitables for measuring electromagnetic interference in line with commercial standards:
• CISPR16, VDE0876 and ANSI C63.2
• EN55011 to 55022, ETS, FCC, VCCI and VDE 0871 to 0879 and ANSI C63.4The instruments are ideal for routine tasks in industry such as development and approval tests in line with commercial standards. Featuring mains-independent battery powering, they are also suitable for mobile applications at EMC service providers, test houses and safety standard authorities.
Superior circuit design
• High measurement accuracy, typical error 0.5 dB
• Wide dynamic range, typical noise figure 7 dB with preamplifier, third-order intercept point 20 dBm (without preamplifier)
• Calibrated attenuator with high pulse loading capacity, switchable in 10-dB steps from 0 to 120 dB
• Comprehensive preselection filters
• Switchable preamplifier with wide dynamic range
• Crystal-stabilized, fast synthesizer with high resolution and sweep mode for fast frequency scanning
• High-level mixer with high oscillator rejection
• Delay-equalized IF filtersDemodulation
• Parallel detectors for average, peak and quasi-peak indication
• 60 dB operating range also for quasipeak and average value indication
• Highly linear envelope detector with more than 70 dB dynamic range
• AM and A0 demodulators (ESVS also FM)
• Logarithmic amplifier with more than 70 dB dynamic range
• Peak indication with automatic consideration of IF bandwidth correction values for broadband interference measurements
• Automatic overload detection in mixer stages and in test channel by permanently activated peak detectorsPowerful processor system
• Manual operation or internal or external processor control
• Flash EPROMs for convenient and fast firmware update through PC
• Macros for automatic and semiautomatic test runs
• Automatic level calibration
• Automatic consideration of frequencydependent transducer factors
• All built-in functions fully programmable via IEC/IEE bus
• Fast measurement in external trigger mode; output of up to 5000 values/s via IEC/IEEE bus, up to 400 values/s including frequency change within certain frequency bands
• 12-bit A/D converter with short conversion time, measurement time selectable between 1 ms and 100 s
• High measurement accuracy thanks to automatic total calibration
• Automatic monitoring of all synthesizer loops and supply voltages during operationOptimum result display and printout
• Measurement of voltage, field strength, current and pulse spectral density with display of relevant units
• Indication of result on analog meter or digital display with 0.1 dB resolution
• Output of results as lists and diagrams on printer including limit linesFurther features
• Digital level indication on LCD and analog level indication on moving-coil meter taking into account transducer factors and their units
• Numerous interfaces for driving or feeding additional devices
• AC supply as well as battery powering for mobile applications
Datasheet -
Power Meter
ROHDE & SCHWARZ NRVS
Uncompromizing technology and
ease of operation make the NRVS an
ideal instrument for any kind of power
measurement in manifold laboratory
and system applications. Thanks to its
unique measuring heads with calibra-
tion data memory and temperature
sensor, which make adjustments by
the user superfluous, the NRVS meas-
ures at all times with high accuracy
and free of operator’s errors.
The range of measuring heads includes thermal power sensors as well as highly sensitive diode power sensors, peak power
sensors, probes and insertion units for voltage measurements. The NRVS covers a power span from 100 pW up to the
kW range. In addition to the power sensors, all voltage probes of the URV5-Z series can be used.
Datasheet -
Open Switch and Control Platform
ROHDE & SCHWARZ OSP150
The modular R&S OSP open switch and control platform can be used to perform RF switch and control tasks.
* Compact size requiring little space
* Optimal configuration by selecting the appropriate switch and control modules
* Plug & play makes complex installation superfluous
* three module slots on the back and two on the front
* Electromechanical RF relays DC to 67 GHz
* RF solid-state relays (SSR) 9 kHz to 10 GHz
* Digital I/O and multiplexer modules
* Special switch and control modules
Datasheet -
Signal Generator
ROHDE & SCHWARZ SML03
he RSSML signal generators offer all the functionalities of a state-of-the-art, general-purpose signal generators: wide frequency range, large variety of modulation functions and high reliability, at an extremely attractive price. It is ideal as a flexible signal source in automatic test systems in development, servicing or production.
FEATURESSSB phase noise: <- 122 dBc (1Hz) (at f=1GHZ, .f - 20kHz) High level accuracy (deviation – 120 dBm)
High reliability through electronic attenuator
Digital frequency and level sweep
Precise DC-coupled FM enables usage as accurage VCO
Optional pulse modulator with integrated pulse generator
Three year calibration cycle
Unit Size: 427 mm high x 88 mm wide x 450 mm deep ; < 8.5 kg. Datasheet -
VIDEO TEST SIGNAL GENERATOR
ROHDE & SCHWARZ SPF2
The R&S SPF2 Video Test Signal Generator produces all the video signals for TV measurements in accordance with exisiing standards or with special waveforms and amplitudes and inserts these as test lines into the program signal.
The composite colour video signal (CCVS) for full-field measurements can have standard levels or the amplitudes of the individual signal components, such as sync pulse, picture component and composite (colour) video, can be adjusted.
The SPF2 combines a number of instrument functions: video signa l generator, test signal generator, noise generator, VTR test signal generator and test signal inserter.
* Standards B/G, D, H, I (PAL) and M (NTSC)
* Video signal generator
* Noise Generator
* VTR test signal generator
* Test signal generator
* Test signal inserter -
ROHDE & SCWARZ CMS52
ROHDE & SCWARZ CMS52 RADIOCOMMUNICATION SERVICE MONITOR 0.4 to 1000 MHz
Options included:
B1/B2 > OCXO
B39 > Transf., Contr., Interf.
B59 > DuplexThe CMS radiocommunication service monitor is the ideal radio tester for use in service, maintenance, and test departments. It is suitable for all transceivers using AM, FM or, jM as well as SSB.
Optional extensions enable the CMS to satisfy all requirements of radio measurements and even to cover related fields.
Low weight, compact size, and low power consumption make this instrument particularly suitable for mobile use. Whether stationary or mobile, the CMS with its extensive test facilities always provides a valuable service.
The CMS uses a high-contrast, backlit LCD screen with high resolution and is operated via softkeys. A clear menu structure allows fast and direct access to all measurement facilities.
With the autorun control and printer interface, automatic test routines can easily be configured and stored via the front-panel keypad. Tolerances can be inserted into these test routines to determine and log pass/fail limits.
Battery-backed memory cards are used as program and test report library. Test reports, program lists, and screen hardcopies can be output on a printer.
The CMS is a rugged and handy unit that is particularly suitable for mobile use. It can be supplied from the local DC voltage (long operating times due to low power consumption). The results of the automatic transceiver test can be stored on a memory card for later analysis and printout.
The CMS offers great benefits to the development engineer: In a minimum of space it combines RF and AF generators as well as analyzers with high accuracy and wide dynamic range.
Due to the comprehensive standard configuration of the individual ¸CMS models and the optional extensions tailored to specific applications, additional external measuring instruments are not required.
Signal sources
• RF synthesizer from 0.4 MHz to 1000 MHz, resolution 10 Hz, with AM, FM, jM, and multitone modulation capabilities
• Two independent modulation generators, 20 Hz to 30 kHz each, resolution 0.1 Hz
• Selective-call coder for all standards (also user-programmable)
• CDCSS coder
• DTMF coder
• 10 MHz reference frequency input/output
• VOR/ILS signal generatorMeasuring facilities
• RF frequency counter, RF frequencyoffset counter
• RF power meter from 1 mW to 100 W
• Selective RF power meter down to –100 dBm
• RF spectrum monitor with wide dynamic range and filters that also allow modulation analysis (AM, FM, SSB)
• Tracking generator in frequency range from 400 kHz to 1000 MHz
• Adjacent-channel power meter with standard ETSI filters
• Modulation meter for AM, FM, and jM; detectors: +PK, –PK, PK HOLD, ±PK/2, RMS, RMS √2
• Duplex modulation meter for duplex spacings of any size
• AF voltmeter with peak and true RMS weighting
• SINAD meter with variable test frequency
• S/N meter
• Distortion meter with variable test frequency
• AF frequency counter with period and gate-time counting
• Selective-call decoder for all standards (also user-programmable)
• DTMF decoder
• Oscilloscope
• DC ammeter/voltmeter T
• ransient recorder for analysis of power and frequency transients
• SSB menus
• Harmonic measurements
• Cable fault finder
Datasheet -
Power Supply
SORENSEN DCS8-125
Programmable POWER SUPPLY 0-8 VOLTS 0-125 AMPS.
he DCS80-125 is a 1000 Watt DC Power Supply from Sorensen. Supplies DC voltage and current to test, design, and troubleshoot electric and electronic circuits.
This unit has a 8V and 125A.
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies utilize switch-mode technology to achieve high power density in a low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits. This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation.
The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/ local programming and preview status of voltage, current and OVP setpoints.
Datasheet -
Power Supply
SORENSEN DCS80-13
Programmable POWER SUPPLY 0-80 VOLTS 0-13 AMPS
The DCS80-13E is a 1000 Watt DC Power Supply from Sorensen. Supplies DC voltage and current to test, design, and troubleshoot electric and electronic circuits.
This unit has a 80V and 13A.
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies utilize switch-mode technology to achieve high power density in a low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits. This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation.
The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/ local programming and preview status of voltage, current and OVP setpoints.
Datasheet -
Power Supply
TDK-Lambda GEN-60-40-1P230
Programmable Lab Power Supply 0-60 V DC 0-40 A
This 2400 W lab power supply sets new standards. They are currently the most powerful 1 HU lab power supplies on the market. Another advantage is that you can stack one device on top of another which means that it needs no air slit either above or below and can actually get by on 1 HU.
Output voltages of up to 60 V and output currents of up to 40 A can be adjusted directly on the device or remotely via the built-in RS232/RS485 interface. All important functions can also be programmed via analogue inputs (control voltage 0 5V, 0-10V, control current 4-20 mA or via external resistor; relevant drivers are available for the digital control e.g., via LabView and LabWindows). High-resolution 16-bit A/D and D/A converters enable very precise settings and programming; the dial controls on the device can be switched between coarse and fine adjustment.
A dual digital display shows the current values, and various status information (andOver Voltage Protection, Under Voltage Limit, overload mode, address settings again), and a monitor output provides corresponding analog voltages (0 – 5 V or 0 – 10 V) for an external monitoring The device can naturally be operated as a constant voltage as well as a constant current source and can, if necessary, automatically switch between these operating modes. Several devices can be switched serially or in parallel. This GEN/H model is half the structural shape of 19″ racks.
Datasheet
-
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
RSA3000 SERIES
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available€3,395.00€4,195.00View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available€4,295.00€4,995.00View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet€2,999.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E
he Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available€2,999.00€3,199.00View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030E-TG
Real-Time Spectrum Analyzer from 9 kHz to 4.5 GHz with Tracking Generator.
The Rigol RSA3000E series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.
Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.
The RSA3000E combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol's new RSA3000E series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000E family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals.
Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration.
The RSA3000E have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard.
Extendibility: Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.Features
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available
Datasheet€3,399.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
Datasheet€5,007.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available€4,395.00€5,195.00View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045-TG
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available€5,495.00€6,195.00View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3045N
For all new order of RSA3000N versions (not valid for RSA3000E versions) we providing free of charge EMI
and Pre-Amplifier Option (RSA3000-EMI and RSA3000-PA)The RSA3000 series, real-time spectrum analyzer integrates in a single instrument four measurement modes to face in the most complete way all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra real technology
Average Display Noise Level (DANL): <-161 dBm (typical)
Phase noise: <-102 dBc / Hz (typical)
– Level measurement uncertainty: <1.0 dB
-4.5 GHz tracking generator
– Up to 40 MHz of bandwidth for real-time analysis
-Multiple measurement modes
-Various advanced measurement functions
-EMI measurement application (option)
– Vector network analyzer application
-Multiple trigger modes and trigger masks
-Density, spectrogram and other display modes
– PC software options
-10.1 '' capacitive multi-touch screen; support tactile gestures
-USB, LAN, HDMI and other communication and display interfaces
Datasheet€6,185.00 View Product -
Spectrum Analyzer
RIGOL RSA5032
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1” capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Scheda Tecnica€5,995.00€6,895.00View Product -
Spectrum Analyzer
RIGOL RSA5032-TG
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.9 kHz to 3.2 or 6.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
1 Hz Minimum Resolution Bandwidth (RBW)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available
Datasheet€6,995.00€7,895.00View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5032N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
€7,890.00 View Product -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.- 9 kHz to 3.2 or 6.5 GHz Frequency Range
- 10.1” Capacitive touchscreen display
- Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
- Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
- Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
- 7 Real-Time visualization modes
- 100 % POI as low as 7. 45 µs
- 1 Hz Minimum Resolution Bandwidth (RBW)
- 1 ms full span sweep speed
- EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
- Tracking Generator and VSWR measurements available
€7,695.00€8,595.00View Product -
Spectrum Analyzer
RIGOL RSA5065-TG
Per tutti i nuovi ordini di versioni RSA5000 (-TG) forniamo gratuitamente una larghezza di banda in tempo reale di 40 MHz e opzione preamplificatore (RSA5000-B40 e RSA5000-PA)
Gli ingegneri che integrano WiFi, Bluetooth e altre moderne tecnologie RF devono affrontare sfide complesse come i segnali di salto di frequenza, i conflitti di canale e le interferenze dello spettro. Gli analizzatori di spettro in tempo reale apportano la dimensione del tempo all'analisi RF semplificando il monitoraggio e la caratterizzazione di questi complessi sistemi RF. RSA5000 combina prestazioni in tempo reale leader del settore (POI da 7.45μs 100%), display con dati avanzati e opzioni di trigger avanzate che consentono all'utente di acquisire, identificare e analizzare rapidamente questi eventi complessi.
La serie Rigol RSA5000 è una serie di analizzatori di spettro compatti e leggeri con eccellenti capacità di analisi dello spettro standard combinate con un analizzatore di spettro in tempo reale che consente di non perdere alcun segnale di durata superiore a 7,45 μs.
La larghezza di banda in tempo reale di 25 MHz (40 MHz opzionale) e il Trigger della maschera di frequenza consentono di visualizzare, isolare e acquisire segnali per analizzare il loro comportamento su ampiezza, frequenza e tempo.
Questi analizzatori di spettro ridefiniscono la categoria di prodotti dell'analizzatore di spettro per uso generico aggiungendo funzionalità di trigger e analisi dello spettro in tempo reale e stabiliscono un nuovo livello di prestazioni e prezzo. La famiglia RSA5000 è dotata di display touchscreen da 10,1 “, design compatto e interfaccia e operazioni facili da usare, che lo rendono ideale per applicazioni da banco o da campo nei test e produzione RF e wireless come IoT, RFID, segnali modulati analogici e digitali. Embedded-System-Designer può attraversare trigger e analizzare segnali di bus come IC2, SPI con segnali RF.Intervallo di frequenze da 9 kHz a 3.2 o 6.5 GHz
Display touchscreen capacitivo da 10,1 “
Livello medio di rumore visualizzato fino a -165 dBm con opt. preamplificatore
Analisi in tempo reale Larghezza di banda dello standard 25 MHz (opzione 40 MHz)
Trigger di frequenza maschera, trigger di livello di potenza IF e trigger esterno
7 modalità di visualizzazione in tempo reale
100% POI a partire da 7. 45 μs
Larghezza di banda minima risoluzione 1 Hz (RBW)
Velocità di scansione a span intera 1 ms
Standard EMI RBW e rivelatore (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Disponibili le misure di monitoraggio del generatore e del VSWR
Scheda Tecnica€8,695.00€9,595.00View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Datasheet€9,564.00 View Product -
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD55
The R&S CMD55 is capable of testing GSM1800 (formerly named PCN orDCS1800) and GSM1900 (formerly named PCS or DCS1900) mobile phones. This model combines small dimensions with high measurement accuracy and speed. The testers range of capabilities includes all signaling, generator and measurement functions required for verifying the correct operation of the DUT (Device Under Test).
Thanks to its fast go/nogo tests and accurate analysis using optional extensions, the CMD55 is equally well suited for R&D, production and high-end service and production. Based on the wide-range know-how of Rohde & Schwarz in digital radiocommunication testing, which not least was obtained in developing type-approval test systems such as the GSM900 and GSM1800 system simulators, the CMD model is a top-grade tester for present and future measurement applications.
Additional Features:
Mobile-to-base station synchronization
Location update
Incoming call setup
Outgoing call setup
Mobile power level control
Handover (channel change, timeslot change)
Dual-band handover
Peak power measurement
SACCH measurement (eg RxLev, RxQual, power level)
Echo test
Call clearing by mobile
Call clearing by network
DC current/voltage measurement
Phase and frequency error measurement
Measurement of power ramp as a function of time
Bit-error rate (BER) measurement -
Senza categoria
Rohde & Schwarz CMD57 Digital RadioCommunication Tester
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress. -
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD60
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress.
The Rohde & Schwarz CMD60 addresses all aspects of test and measurement applications from production and service to development and quality assurance. It comes equipped with remote control via IEEE488/IEC625 bus + RS232, automated regression and stress testing of DUT, and automatic go/no go testing of fixed and portable part.Additional Features:
High production output at low investment for test equipment
The R&S® CMD60 can be remote controlled via IEC/IEEE-bus interface using SCPI-compatible commands.
Comprehensive test capabilities implemented in one single unit.
Comprehensive in-depth measurements based on ETSI Rec. CTR06
Automatic regression and stress tests
The tester supplies a great number of DECT-specific signals such as bit clock, TX/RX enable, to control the module under test
Comprehensive audio tests
Ergonomic user interface and relaxed manual operation due to a large bright LCD (requires noDECT-specific knowledge) strictly separated from the expert user interface for configuration
Integrated tools such as a scope display for power and FM demodulation versus time ease troubleshooting -
Rohde & Schwarz ESHS10
R&S ESHS10 EMI Test Receivers, 10: 9 kHz to 30 MHz
The receivers ESHS 10 is suitables for measuring electromagnetic interference in line with commercial standards:
• CISPR16, VDE0876 and ANSI C63.2
• EN55011 to 55022, ETS, FCC, VCCI and VDE 0871 to 0879 and ANSI C63.4The instruments are ideal for routine tasks in industry such as development and approval tests in line with commercial standards. Featuring mains-independent battery powering, they are also suitable for mobile applications at EMC service providers, test houses and safety standard authorities.
Superior circuit design
• High measurement accuracy, typical error 0.5 dB
• Wide dynamic range, typical noise figure 7 dB with preamplifier, third-order intercept point 20 dBm (without preamplifier)
• Calibrated attenuator with high pulse loading capacity, switchable in 10-dB steps from 0 to 120 dB
• Comprehensive preselection filters
• Switchable preamplifier with wide dynamic range
• Crystal-stabilized, fast synthesizer with high resolution and sweep mode for fast frequency scanning
• High-level mixer with high oscillator rejection
• Delay-equalized IF filtersDemodulation
• Parallel detectors for average, peak and quasi-peak indication
• 60 dB operating range also for quasipeak and average value indication
• Highly linear envelope detector with more than 70 dB dynamic range
• AM and A0 demodulators (ESVS also FM)
• Logarithmic amplifier with more than 70 dB dynamic range
• Peak indication with automatic consideration of IF bandwidth correction values for broadband interference measurements
• Automatic overload detection in mixer stages and in test channel by permanently activated peak detectorsPowerful processor system
• Manual operation or internal or external processor control
• Flash EPROMs for convenient and fast firmware update through PC
• Macros for automatic and semiautomatic test runs
• Automatic level calibration
• Automatic consideration of frequencydependent transducer factors
• All built-in functions fully programmable via IEC/IEE bus
• Fast measurement in external trigger mode; output of up to 5000 values/s via IEC/IEEE bus, up to 400 values/s including frequency change within certain frequency bands
• 12-bit A/D converter with short conversion time, measurement time selectable between 1 ms and 100 s
• High measurement accuracy thanks to automatic total calibration
• Automatic monitoring of all synthesizer loops and supply voltages during operationOptimum result display and printout
• Measurement of voltage, field strength, current and pulse spectral density with display of relevant units
• Indication of result on analog meter or digital display with 0.1 dB resolution
• Output of results as lists and diagrams on printer including limit linesFurther features
• Digital level indication on LCD and analog level indication on moving-coil meter taking into account transducer factors and their units
• Numerous interfaces for driving or feeding additional devices
• AC supply as well as battery powering for mobile applications
Datasheet -
Power Meter
ROHDE & SCHWARZ NRVS
Uncompromizing technology and
ease of operation make the NRVS an
ideal instrument for any kind of power
measurement in manifold laboratory
and system applications. Thanks to its
unique measuring heads with calibra-
tion data memory and temperature
sensor, which make adjustments by
the user superfluous, the NRVS meas-
ures at all times with high accuracy
and free of operator’s errors.
The range of measuring heads includes thermal power sensors as well as highly sensitive diode power sensors, peak power
sensors, probes and insertion units for voltage measurements. The NRVS covers a power span from 100 pW up to the
kW range. In addition to the power sensors, all voltage probes of the URV5-Z series can be used.
Datasheet -
Open Switch and Control Platform
ROHDE & SCHWARZ OSP150
The modular R&S OSP open switch and control platform can be used to perform RF switch and control tasks.
* Compact size requiring little space
* Optimal configuration by selecting the appropriate switch and control modules
* Plug & play makes complex installation superfluous
* three module slots on the back and two on the front
* Electromechanical RF relays DC to 67 GHz
* RF solid-state relays (SSR) 9 kHz to 10 GHz
* Digital I/O and multiplexer modules
* Special switch and control modules
Datasheet -
Signal Generator
ROHDE & SCHWARZ SML03
he RSSML signal generators offer all the functionalities of a state-of-the-art, general-purpose signal generators: wide frequency range, large variety of modulation functions and high reliability, at an extremely attractive price. It is ideal as a flexible signal source in automatic test systems in development, servicing or production.
FEATURESSSB phase noise: <- 122 dBc (1Hz) (at f=1GHZ, .f - 20kHz) High level accuracy (deviation – 120 dBm)
High reliability through electronic attenuator
Digital frequency and level sweep
Precise DC-coupled FM enables usage as accurage VCO
Optional pulse modulator with integrated pulse generator
Three year calibration cycle
Unit Size: 427 mm high x 88 mm wide x 450 mm deep ; < 8.5 kg. Datasheet -
VIDEO TEST SIGNAL GENERATOR
ROHDE & SCHWARZ SPF2
The R&S SPF2 Video Test Signal Generator produces all the video signals for TV measurements in accordance with exisiing standards or with special waveforms and amplitudes and inserts these as test lines into the program signal.
The composite colour video signal (CCVS) for full-field measurements can have standard levels or the amplitudes of the individual signal components, such as sync pulse, picture component and composite (colour) video, can be adjusted.
The SPF2 combines a number of instrument functions: video signa l generator, test signal generator, noise generator, VTR test signal generator and test signal inserter.
* Standards B/G, D, H, I (PAL) and M (NTSC)
* Video signal generator
* Noise Generator
* VTR test signal generator
* Test signal generator
* Test signal inserter -
ROHDE & SCWARZ CMS52
ROHDE & SCWARZ CMS52 RADIOCOMMUNICATION SERVICE MONITOR 0.4 to 1000 MHz
Options included:
B1/B2 > OCXO
B39 > Transf., Contr., Interf.
B59 > DuplexThe CMS radiocommunication service monitor is the ideal radio tester for use in service, maintenance, and test departments. It is suitable for all transceivers using AM, FM or, jM as well as SSB.
Optional extensions enable the CMS to satisfy all requirements of radio measurements and even to cover related fields.
Low weight, compact size, and low power consumption make this instrument particularly suitable for mobile use. Whether stationary or mobile, the CMS with its extensive test facilities always provides a valuable service.
The CMS uses a high-contrast, backlit LCD screen with high resolution and is operated via softkeys. A clear menu structure allows fast and direct access to all measurement facilities.
With the autorun control and printer interface, automatic test routines can easily be configured and stored via the front-panel keypad. Tolerances can be inserted into these test routines to determine and log pass/fail limits.
Battery-backed memory cards are used as program and test report library. Test reports, program lists, and screen hardcopies can be output on a printer.
The CMS is a rugged and handy unit that is particularly suitable for mobile use. It can be supplied from the local DC voltage (long operating times due to low power consumption). The results of the automatic transceiver test can be stored on a memory card for later analysis and printout.
The CMS offers great benefits to the development engineer: In a minimum of space it combines RF and AF generators as well as analyzers with high accuracy and wide dynamic range.
Due to the comprehensive standard configuration of the individual ¸CMS models and the optional extensions tailored to specific applications, additional external measuring instruments are not required.
Signal sources
• RF synthesizer from 0.4 MHz to 1000 MHz, resolution 10 Hz, with AM, FM, jM, and multitone modulation capabilities
• Two independent modulation generators, 20 Hz to 30 kHz each, resolution 0.1 Hz
• Selective-call coder for all standards (also user-programmable)
• CDCSS coder
• DTMF coder
• 10 MHz reference frequency input/output
• VOR/ILS signal generatorMeasuring facilities
• RF frequency counter, RF frequencyoffset counter
• RF power meter from 1 mW to 100 W
• Selective RF power meter down to –100 dBm
• RF spectrum monitor with wide dynamic range and filters that also allow modulation analysis (AM, FM, SSB)
• Tracking generator in frequency range from 400 kHz to 1000 MHz
• Adjacent-channel power meter with standard ETSI filters
• Modulation meter for AM, FM, and jM; detectors: +PK, –PK, PK HOLD, ±PK/2, RMS, RMS √2
• Duplex modulation meter for duplex spacings of any size
• AF voltmeter with peak and true RMS weighting
• SINAD meter with variable test frequency
• S/N meter
• Distortion meter with variable test frequency
• AF frequency counter with period and gate-time counting
• Selective-call decoder for all standards (also user-programmable)
• DTMF decoder
• Oscilloscope
• DC ammeter/voltmeter T
• ransient recorder for analysis of power and frequency transients
• SSB menus
• Harmonic measurements
• Cable fault finder
Datasheet -
Power Supply
SORENSEN DCS8-125
Programmable POWER SUPPLY 0-8 VOLTS 0-125 AMPS.
he DCS80-125 is a 1000 Watt DC Power Supply from Sorensen. Supplies DC voltage and current to test, design, and troubleshoot electric and electronic circuits.
This unit has a 8V and 125A.
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies utilize switch-mode technology to achieve high power density in a low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits. This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation.
The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/ local programming and preview status of voltage, current and OVP setpoints.
Datasheet -
Power Supply
SORENSEN DCS80-13
Programmable POWER SUPPLY 0-80 VOLTS 0-13 AMPS
The DCS80-13E is a 1000 Watt DC Power Supply from Sorensen. Supplies DC voltage and current to test, design, and troubleshoot electric and electronic circuits.
This unit has a 80V and 13A.
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies utilize switch-mode technology to achieve high power density in a low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits. This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation.
The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/ local programming and preview status of voltage, current and OVP setpoints.
Datasheet -
Power Supply
TDK-Lambda GEN-60-40-1P230
Programmable Lab Power Supply 0-60 V DC 0-40 A
This 2400 W lab power supply sets new standards. They are currently the most powerful 1 HU lab power supplies on the market. Another advantage is that you can stack one device on top of another which means that it needs no air slit either above or below and can actually get by on 1 HU.
Output voltages of up to 60 V and output currents of up to 40 A can be adjusted directly on the device or remotely via the built-in RS232/RS485 interface. All important functions can also be programmed via analogue inputs (control voltage 0 5V, 0-10V, control current 4-20 mA or via external resistor; relevant drivers are available for the digital control e.g., via LabView and LabWindows). High-resolution 16-bit A/D and D/A converters enable very precise settings and programming; the dial controls on the device can be switched between coarse and fine adjustment.
A dual digital display shows the current values, and various status information (andOver Voltage Protection, Under Voltage Limit, overload mode, address settings again), and a monitor output provides corresponding analog voltages (0 – 5 V or 0 – 10 V) for an external monitoring The device can naturally be operated as a constant voltage as well as a constant current source and can, if necessary, automatically switch between these operating modes. Several devices can be switched serially or in parallel. This GEN/H model is half the structural shape of 19″ racks.
Datasheet