Rigol
Showing 61–90 of 222 results
-
Oscilloscope 4 channles
RIGOL DHO814
100 MHz, 4 analog channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 25 Mpts, up to 12-bit vertical resolution, 7'' touch display
Analog channel bandwidth: 100 MHz
4 analog channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 25 Mpts
Vertical sensitivity range: 500 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interfaceSKU: n/a€490.00 View Product -
Oscilloscope 4 channles
RIGOL DHO914
125 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, 7” touch display
Analog channel bandwidth: 125 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interfaceSKU: n/a€590.00 View Product -
Oscilloscope 4 channles
RIGOL DHO914S
125 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, AFG function, Bode Plot, 7” touch display
Analog channel bandwidth: 125 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
Integrates the AFG function, bode plot analysis, histogram, digital signal analysis, and etc
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interfaceSKU: n/a€690.00 View Product -
Oscilloscope 4 channles
RIGOL DHO924
250 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, 7” touch display
Analog channel bandwidth: 250 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interfaceSKU: n/a€690.00 View Product -
DC Electronic Load
Rigol DL3021
The Rigol DL3021 is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device and RS232 interface. LAN is available as an option and performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
SKU: 1296€439.00 View Product -
DC Electronic Load
RIGOL DL3021A
The Rigol DL3021A is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
SKU: 1297€607.00 View Product -
DC Electronic Load
Rigol DL3031A
The Rigol DL3031A is a cost-effective programmable DC electronic load for max. 150V, 60A, 350W with USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
SKU: 1299€1,143.00 View Product -
Digital Multimeter
RIGOL DM3058
The Rigol DM3058 is a high quality digital tabletop multimeter of the DM3050 series with a sampling rate of max. 120 Sa/s. These Rigol multimeters have a very sophisticated and easy to use interface and provides plenty functions for all measurement tasks. The use of the menu navigation is very intuitional and the device will provide precise results in its many application areas. With the help of a computer you can perform long running monitoring tasks too. The LC-Display is with its 256×64 pixels easy to read and provides a very good overview over all features. The display has a resolution of 5½ digits (max. count 240.000). Delivery including 2 probes, USB cable, pc software, power cable, 2 replacement fuses and manual. Function Max. Reading 240.000 (5½ digits) LCD 90 mm × 25 mm (256x64Pixel) Sampling rate up to 120 reading/sec. Memory Depth 10 groups of 2000 readings Connections RS-232, USB Device, USB Host, Ext.Trig., VM Comp., 10/100MBit LAN, GPIB Details Rigol DM3058 Digital Multimeter Power supply 230 V / 50 Hz / 110 V / 60 Hz mains connection Safety standard CAT II/600 V Dimensions 290.5 mm × 231.6 mm × 107.0 mm (11.44″ × 9.12″ × 4.21″) Weight without accessories / packaging 2500 g (5.512 lbs) Weight with accessories / packaging 4465 g (9.844 lbs) Warranty 3 Years
5 1/2 digit true RMS precision table multimeterSKU: 182€564.00 View Product -
Digital Multimeter
Rigol DM3058E
The Model DM3058 DMM gives reliable, cost effective, full DMM capabilities measuring DCV, ACV, DCI, ACI, Resistance (2 & 4 Wire), Capacitance, Diode Test, Frequency, and Temperature. These DMMs are designed for simple and efficient bench top use, but include software options for datalogging and remote programming from almost any interface. The DM3058 is a great bench tool for basic, reliable measurements regardless of your application or need. • True 5 ½ digit resolution (240,000 counts) • 123 Readings/second maximum reading rate • 0.015% DC Voltage Accuracy • USB and RS-232 • SCPI Command Compatibility • Available datalogging and sensor connectivity
5 1/2 digit. DMMSKU: 228€390.00 View Product -
Power Supply
RIGOL DP2031
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 5 A, DC, max 222 W). 4.3-inch LCD color touch screen. High resolution for measurement of 1 μA low range current. Low output ripple and noise <350 μVrms/2 mVpp. USB HOST, LAN, Digital I/O, and RS232 (standard)
3 electrically isolated independent channels with a maximum total power of up to 222 W
32 V/3 A || 32 V/3 A || 6 V/5 A (standard)
32 V/2 A || 32 V/2 A || 6 V/10 A (optional)
4.3-inch LCD color touch screen
Internal series/parallel connections for CH1 and CH2
High resolution for measurement of 1 μA low range current
Capability to measure and display wide dynamic ranges of current
Excellent programming/readback accuracy
Transient response time <50 μs
Front and rear output terminals
2-wire or 4-wire remote sense
A maximum of 512 arbitrary points with dwell time down to 1 ms; various built-in basic waveforms
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Automatic switchover between low and high range measurement
Timing output, energy consumption analysis (IoT), data logging and analysis
Capability to measure the minimum of 1 ms pulse current
Three rack-units (3U), 1/2-rack form factor
Software control
Over voltage, over current, and over temperature protection
Various interfaces available: USB HOST, LAN, Digital I/O, and RS232 (standard)SKU: n/a€1,099.00 View Product -
Power Supply
Rigol DP711
The Rigol DP711 is a very high quality programmable laboratory power supply with one DC output (30 V/5 A) and a maximum power output of 150 W. Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves.
The menu has an intuitive structure. The Rigol DP711 features a relative large (8.9 cm / 3.5″) and easy to read TFT display.
A timer control can be used to set the output signal to different values in up to 2048 groups.SKU: 1032€295.00 View Product -
Power Supply
Rigol DP712
The Rigol DP712 is a very high quality programmable laboratory power supply with one DC output (50 V/3 A) and a maximum power output of 150 W. Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves.
The menu has an intuitive structure. The Rigol DP712 features a relative large (8.9 cm / 3.5″) and easy to read TFT display.
A timer control can be used to set the output signal to different values in up to 2048 groups.SKU: 1033€295.00 View Product -
Power Supply
Rigol DP811
The Rigol DP811 is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 924€549.00 View Product -
Power Supply
Rigol DP811A
The Rigol DP811A is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 738€670.00 View Product -
Power Supply, Programmable DC Electronic Loa
RIGOL DP813
The Rigol DP813 belongs to the Rigol DP800 series and has 1 channel. The power supply has two ranges that can be used on the single channel, 0-8V/0-20A and 0-20V/0-10A. The lab power supply has USB Host, USB Device interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 200W. The lab power supplies are equipped with a clear display where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
SKU: n/a€589.00 View Product -
Power Supply
RIGOL DP813A
Technical specifications:
– Excellent linear regulation and load regulation ratio
– Fast transient response time: <50us
– Standard OVP / OCP / OTP protection functions
– Standard timing output
– Integrated V, A, W measurements and waveform display
– Independent control for each channel
– 3.5 inch TFT displayDifferences between + A and Non-A models:
– Support for more advanced functions: timer and delay output (are standard for all models), while recorder / analyzer / monitor / trigger functions (are standard for “+ A” models and optional for other models)
– Support of various interfaces: USB Host & Device (standard for all models), USB-GPIB (optional for all models), LAN / RS232 / Digital IO (standard for “+ A” models and optional for other models)
– The + A and Non-A models also differ in the values of some specifications, refer to the values shown in the datasheet.
DatasheetSKU: n/a€710.00 View Product -
Power Supply
RIGOL DP821
The Rigol DP821 is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 923€549.00 View Product -
Power Supply
RIGOL DP822
DC power supply with 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
DP822A/DP822: 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
Low ripple and noise:
DP832A/DP832/DP831A/DP831/DP822A/DP822/DP821A/DP821: <350uVrms/2mVpp
Excellent linear regulation rate and load regulation rate
Fast transient response time: <50μs
Some channels are isolated
Standard OVP/OCP/OTP protection functions
Standard timing output
Built-in V,A,W measurements and waveform display
Independent control for each channel
Support more advanced functions: timer and delay output(standard),
recorder/analyzer/monitor/trigger(standard for “+A” models and optional for other models)
5-inch TFT display
Various interfaces: USB Host&Device(standard), USB-GPIB (optional),
LAN/RS232/Digital IO(standard for “+A” models and optional for other models)
For DP822, the high-resolution setting, trigger, monitor, analyzer as well as the RS232 and LAN
communication functions are all optional functions.SKU: n/a€599.00 View Product -
Power Supply
RIGOL DP822A
The Rigol DP822A has 2 channels, the first channel can supply a voltage of 0-20V and a current of 0-5A. The second channel can provide a voltage of 0-5V and a current of 0-16A. The lab power supply has USB Host/USB
Device, LAN, RS232 and Digital I/O interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 180W. The lab power supplies are equipped with a clear display
where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
Key Features & Specifications:
–Low Ripple Noise: <350uvrms / 2mvpp
–Fast Transient Response Time: < 50us
–Standard Timing Output
–Built in V / A / W Measurement and Waveform Display
–Output Analysis, Monitoring, Setting Preset and Other Functions
–Original 3.5-inch Tft Wide Screen Display
DatasheetSKU: n/a€729.00 View Product -
Power Supply
Rigol DP831
The Rigol DP831 is a very high quality programmable laboratory power supply with three switchable outputs (+8 V/5 A, +30 V/2 A and -30 V/2 A) and a maximum power output of 160 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP831 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 922€419.00 View Product -
Power Supply
RIGOL DP932A
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/OSKU: n/a€690.00 View Product -
Power Supply
RIGOL DP932E
The DP900 Series Power Supplies combine our new touch screen interface with new flexibility and higher speed functions designed for benchtop DC power analysis. The DP932A and DP932U are 3 channel completely isolated benchtop power supplies. Activate the high-speed arb function that allows you to update the power supply output at up to 10 times per second while quickly creating a repeating shape or pattern from the front panel. You can also combine channels 1 and 2 internally either in parallel or in series to expand the power envelope for your testing. No more cabling challenges since you can now get the current or voltage for both channels with one cable connection. The DP932A comes with all the capabilities enabled. The DP932U has optional resolution, digital IO, and arbitrary speed upgrades. The DP932U also comes with safety banana plugs in place of the binding posts on the DP932A. This combination of flexibility and capability makes the DP900 an important addition to any engineer’s bench.
SKU: n/a€380.00€429.00View Product -
Power Supply
RIGOL DP932U
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/OSKU: n/a€529.00 View Product
-
Oscilloscope 4 channles
RIGOL DHO814
100 MHz, 4 analog channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 25 Mpts, up to 12-bit vertical resolution, 7'' touch display
Analog channel bandwidth: 100 MHz
4 analog channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 25 Mpts
Vertical sensitivity range: 500 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interface -
Oscilloscope 4 channles
RIGOL DHO914
125 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, 7” touch display
Analog channel bandwidth: 125 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interface -
Oscilloscope 4 channles
RIGOL DHO914S
125 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, AFG function, Bode Plot, 7” touch display
Analog channel bandwidth: 125 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
Integrates the AFG function, bode plot analysis, histogram, digital signal analysis, and etc
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interface -
Oscilloscope 4 channles
RIGOL DHO924
250 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, 7” touch display
Analog channel bandwidth: 250 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interface -
DC Electronic Load
Rigol DL3021
The Rigol DL3021 is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device and RS232 interface. LAN is available as an option and performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
-
DC Electronic Load
RIGOL DL3021A
The Rigol DL3021A is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
-
DC Electronic Load
Rigol DL3031A
The Rigol DL3031A is a cost-effective programmable DC electronic load for max. 150V, 60A, 350W with USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
-
Digital Multimeter
RIGOL DM3058
The Rigol DM3058 is a high quality digital tabletop multimeter of the DM3050 series with a sampling rate of max. 120 Sa/s. These Rigol multimeters have a very sophisticated and easy to use interface and provides plenty functions for all measurement tasks. The use of the menu navigation is very intuitional and the device will provide precise results in its many application areas. With the help of a computer you can perform long running monitoring tasks too. The LC-Display is with its 256×64 pixels easy to read and provides a very good overview over all features. The display has a resolution of 5½ digits (max. count 240.000). Delivery including 2 probes, USB cable, pc software, power cable, 2 replacement fuses and manual. Function Max. Reading 240.000 (5½ digits) LCD 90 mm × 25 mm (256x64Pixel) Sampling rate up to 120 reading/sec. Memory Depth 10 groups of 2000 readings Connections RS-232, USB Device, USB Host, Ext.Trig., VM Comp., 10/100MBit LAN, GPIB Details Rigol DM3058 Digital Multimeter Power supply 230 V / 50 Hz / 110 V / 60 Hz mains connection Safety standard CAT II/600 V Dimensions 290.5 mm × 231.6 mm × 107.0 mm (11.44″ × 9.12″ × 4.21″) Weight without accessories / packaging 2500 g (5.512 lbs) Weight with accessories / packaging 4465 g (9.844 lbs) Warranty 3 Years
5 1/2 digit true RMS precision table multimeter -
Digital Multimeter
Rigol DM3058E
The Model DM3058 DMM gives reliable, cost effective, full DMM capabilities measuring DCV, ACV, DCI, ACI, Resistance (2 & 4 Wire), Capacitance, Diode Test, Frequency, and Temperature. These DMMs are designed for simple and efficient bench top use, but include software options for datalogging and remote programming from almost any interface. The DM3058 is a great bench tool for basic, reliable measurements regardless of your application or need. • True 5 ½ digit resolution (240,000 counts) • 123 Readings/second maximum reading rate • 0.015% DC Voltage Accuracy • USB and RS-232 • SCPI Command Compatibility • Available datalogging and sensor connectivity
5 1/2 digit. DMM -
Power Supply
RIGOL DP2031
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 5 A, DC, max 222 W). 4.3-inch LCD color touch screen. High resolution for measurement of 1 μA low range current. Low output ripple and noise <350 μVrms/2 mVpp. USB HOST, LAN, Digital I/O, and RS232 (standard)
3 electrically isolated independent channels with a maximum total power of up to 222 W
32 V/3 A || 32 V/3 A || 6 V/5 A (standard)
32 V/2 A || 32 V/2 A || 6 V/10 A (optional)
4.3-inch LCD color touch screen
Internal series/parallel connections for CH1 and CH2
High resolution for measurement of 1 μA low range current
Capability to measure and display wide dynamic ranges of current
Excellent programming/readback accuracy
Transient response time <50 μs
Front and rear output terminals
2-wire or 4-wire remote sense
A maximum of 512 arbitrary points with dwell time down to 1 ms; various built-in basic waveforms
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Automatic switchover between low and high range measurement
Timing output, energy consumption analysis (IoT), data logging and analysis
Capability to measure the minimum of 1 ms pulse current
Three rack-units (3U), 1/2-rack form factor
Software control
Over voltage, over current, and over temperature protection
Various interfaces available: USB HOST, LAN, Digital I/O, and RS232 (standard) -
Power Supply
Rigol DP711
The Rigol DP711 is a very high quality programmable laboratory power supply with one DC output (30 V/5 A) and a maximum power output of 150 W. Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves.
The menu has an intuitive structure. The Rigol DP711 features a relative large (8.9 cm / 3.5″) and easy to read TFT display.
A timer control can be used to set the output signal to different values in up to 2048 groups. -
Power Supply
Rigol DP712
The Rigol DP712 is a very high quality programmable laboratory power supply with one DC output (50 V/3 A) and a maximum power output of 150 W. Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves.
The menu has an intuitive structure. The Rigol DP712 features a relative large (8.9 cm / 3.5″) and easy to read TFT display.
A timer control can be used to set the output signal to different values in up to 2048 groups. -
Power Supply
Rigol DP811
The Rigol DP811 is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
Power Supply
Rigol DP811A
The Rigol DP811A is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
Power Supply, Programmable DC Electronic Loa
RIGOL DP813
The Rigol DP813 belongs to the Rigol DP800 series and has 1 channel. The power supply has two ranges that can be used on the single channel, 0-8V/0-20A and 0-20V/0-10A. The lab power supply has USB Host, USB Device interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 200W. The lab power supplies are equipped with a clear display where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
-
Power Supply
RIGOL DP813A
Technical specifications:
– Excellent linear regulation and load regulation ratio
– Fast transient response time: <50us
– Standard OVP / OCP / OTP protection functions
– Standard timing output
– Integrated V, A, W measurements and waveform display
– Independent control for each channel
– 3.5 inch TFT displayDifferences between + A and Non-A models:
– Support for more advanced functions: timer and delay output (are standard for all models), while recorder / analyzer / monitor / trigger functions (are standard for “+ A” models and optional for other models)
– Support of various interfaces: USB Host & Device (standard for all models), USB-GPIB (optional for all models), LAN / RS232 / Digital IO (standard for “+ A” models and optional for other models)
– The + A and Non-A models also differ in the values of some specifications, refer to the values shown in the datasheet.
Datasheet -
Power Supply
RIGOL DP821
The Rigol DP821 is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
Power Supply
RIGOL DP822
DC power supply with 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
DP822A/DP822: 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
Low ripple and noise:
DP832A/DP832/DP831A/DP831/DP822A/DP822/DP821A/DP821: <350uVrms/2mVpp
Excellent linear regulation rate and load regulation rate
Fast transient response time: <50μs
Some channels are isolated
Standard OVP/OCP/OTP protection functions
Standard timing output
Built-in V,A,W measurements and waveform display
Independent control for each channel
Support more advanced functions: timer and delay output(standard),
recorder/analyzer/monitor/trigger(standard for “+A” models and optional for other models)
5-inch TFT display
Various interfaces: USB Host&Device(standard), USB-GPIB (optional),
LAN/RS232/Digital IO(standard for “+A” models and optional for other models)
For DP822, the high-resolution setting, trigger, monitor, analyzer as well as the RS232 and LAN
communication functions are all optional functions. -
Power Supply
RIGOL DP822A
The Rigol DP822A has 2 channels, the first channel can supply a voltage of 0-20V and a current of 0-5A. The second channel can provide a voltage of 0-5V and a current of 0-16A. The lab power supply has USB Host/USB
Device, LAN, RS232 and Digital I/O interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 180W. The lab power supplies are equipped with a clear display
where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
Key Features & Specifications:
–Low Ripple Noise: <350uvrms / 2mvpp
–Fast Transient Response Time: < 50us
–Standard Timing Output
–Built in V / A / W Measurement and Waveform Display
–Output Analysis, Monitoring, Setting Preset and Other Functions
–Original 3.5-inch Tft Wide Screen Display
Datasheet -
Power Supply
Rigol DP831
The Rigol DP831 is a very high quality programmable laboratory power supply with three switchable outputs (+8 V/5 A, +30 V/2 A and -30 V/2 A) and a maximum power output of 160 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP831 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
Power Supply
RIGOL DP932A
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/O -
Power Supply
RIGOL DP932E
The DP900 Series Power Supplies combine our new touch screen interface with new flexibility and higher speed functions designed for benchtop DC power analysis. The DP932A and DP932U are 3 channel completely isolated benchtop power supplies. Activate the high-speed arb function that allows you to update the power supply output at up to 10 times per second while quickly creating a repeating shape or pattern from the front panel. You can also combine channels 1 and 2 internally either in parallel or in series to expand the power envelope for your testing. No more cabling challenges since you can now get the current or voltage for both channels with one cable connection. The DP932A comes with all the capabilities enabled. The DP932U has optional resolution, digital IO, and arbitrary speed upgrades. The DP932U also comes with safety banana plugs in place of the binding posts on the DP932A. This combination of flexibility and capability makes the DP900 an important addition to any engineer’s bench.
-
Power Supply
RIGOL DP932U
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/O
-
Oscilloscope 4 channles
RIGOL DHO814
100 MHz, 4 analog channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 25 Mpts, up to 12-bit vertical resolution, 7'' touch display
Analog channel bandwidth: 100 MHz
4 analog channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 25 Mpts
Vertical sensitivity range: 500 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interface€490.00 View Product -
Oscilloscope 4 channles
RIGOL DHO914
125 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, 7” touch display
Analog channel bandwidth: 125 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interface€590.00 View Product -
Oscilloscope 4 channles
RIGOL DHO914S
125 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, AFG function, Bode Plot, 7” touch display
Analog channel bandwidth: 125 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
Integrates the AFG function, bode plot analysis, histogram, digital signal analysis, and etc
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interface€690.00 View Product -
Oscilloscope 4 channles
RIGOL DHO924
250 MHz, 4 analog channels, 16 digital channels, Real-time sample rate up to 1.25 GSa/s, Memory Depth up to 50 Mpts, up to 12-bit vertical resolution, 7” touch display
Analog channel bandwidth: 250 MHz
4 analog channels, 16 digital channels
up to 12-bit vertical resolution
Real-time sample rate up to 1.25 GSa/s
Memory Depth up to 50 Mpts
Vertical sensitivity range: 200 μV/div to 10 V/div
Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
7″ (1024×600) capacitive multi-touch screen
Supports Web Control interface€690.00 View Product -
DC Electronic Load
Rigol DL3021
The Rigol DL3021 is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device and RS232 interface. LAN is available as an option and performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
€439.00 View Product -
DC Electronic Load
RIGOL DL3021A
The Rigol DL3021A is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
€607.00 View Product -
DC Electronic Load
Rigol DL3031A
The Rigol DL3031A is a cost-effective programmable DC electronic load for max. 150V, 60A, 350W with USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
€1,143.00 View Product -
Digital Multimeter
RIGOL DM3058
The Rigol DM3058 is a high quality digital tabletop multimeter of the DM3050 series with a sampling rate of max. 120 Sa/s. These Rigol multimeters have a very sophisticated and easy to use interface and provides plenty functions for all measurement tasks. The use of the menu navigation is very intuitional and the device will provide precise results in its many application areas. With the help of a computer you can perform long running monitoring tasks too. The LC-Display is with its 256×64 pixels easy to read and provides a very good overview over all features. The display has a resolution of 5½ digits (max. count 240.000). Delivery including 2 probes, USB cable, pc software, power cable, 2 replacement fuses and manual. Function Max. Reading 240.000 (5½ digits) LCD 90 mm × 25 mm (256x64Pixel) Sampling rate up to 120 reading/sec. Memory Depth 10 groups of 2000 readings Connections RS-232, USB Device, USB Host, Ext.Trig., VM Comp., 10/100MBit LAN, GPIB Details Rigol DM3058 Digital Multimeter Power supply 230 V / 50 Hz / 110 V / 60 Hz mains connection Safety standard CAT II/600 V Dimensions 290.5 mm × 231.6 mm × 107.0 mm (11.44″ × 9.12″ × 4.21″) Weight without accessories / packaging 2500 g (5.512 lbs) Weight with accessories / packaging 4465 g (9.844 lbs) Warranty 3 Years
5 1/2 digit true RMS precision table multimeter€564.00 View Product -
Digital Multimeter
Rigol DM3058E
The Model DM3058 DMM gives reliable, cost effective, full DMM capabilities measuring DCV, ACV, DCI, ACI, Resistance (2 & 4 Wire), Capacitance, Diode Test, Frequency, and Temperature. These DMMs are designed for simple and efficient bench top use, but include software options for datalogging and remote programming from almost any interface. The DM3058 is a great bench tool for basic, reliable measurements regardless of your application or need. • True 5 ½ digit resolution (240,000 counts) • 123 Readings/second maximum reading rate • 0.015% DC Voltage Accuracy • USB and RS-232 • SCPI Command Compatibility • Available datalogging and sensor connectivity
5 1/2 digit. DMM€390.00 View Product -
Power Supply
RIGOL DP2031
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 5 A, DC, max 222 W). 4.3-inch LCD color touch screen. High resolution for measurement of 1 μA low range current. Low output ripple and noise <350 μVrms/2 mVpp. USB HOST, LAN, Digital I/O, and RS232 (standard)
3 electrically isolated independent channels with a maximum total power of up to 222 W
32 V/3 A || 32 V/3 A || 6 V/5 A (standard)
32 V/2 A || 32 V/2 A || 6 V/10 A (optional)
4.3-inch LCD color touch screen
Internal series/parallel connections for CH1 and CH2
High resolution for measurement of 1 μA low range current
Capability to measure and display wide dynamic ranges of current
Excellent programming/readback accuracy
Transient response time <50 μs
Front and rear output terminals
2-wire or 4-wire remote sense
A maximum of 512 arbitrary points with dwell time down to 1 ms; various built-in basic waveforms
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Automatic switchover between low and high range measurement
Timing output, energy consumption analysis (IoT), data logging and analysis
Capability to measure the minimum of 1 ms pulse current
Three rack-units (3U), 1/2-rack form factor
Software control
Over voltage, over current, and over temperature protection
Various interfaces available: USB HOST, LAN, Digital I/O, and RS232 (standard)€1,099.00 View Product -
Power Supply
Rigol DP711
The Rigol DP711 is a very high quality programmable laboratory power supply with one DC output (30 V/5 A) and a maximum power output of 150 W. Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves.
The menu has an intuitive structure. The Rigol DP711 features a relative large (8.9 cm / 3.5″) and easy to read TFT display.
A timer control can be used to set the output signal to different values in up to 2048 groups.€295.00 View Product -
Power Supply
Rigol DP712
The Rigol DP712 is a very high quality programmable laboratory power supply with one DC output (50 V/3 A) and a maximum power output of 150 W. Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves.
The menu has an intuitive structure. The Rigol DP712 features a relative large (8.9 cm / 3.5″) and easy to read TFT display.
A timer control can be used to set the output signal to different values in up to 2048 groups.€295.00 View Product -
Power Supply
Rigol DP811
The Rigol DP811 is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€549.00 View Product -
Power Supply
Rigol DP811A
The Rigol DP811A is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€670.00 View Product -
Power Supply, Programmable DC Electronic Loa
RIGOL DP813
The Rigol DP813 belongs to the Rigol DP800 series and has 1 channel. The power supply has two ranges that can be used on the single channel, 0-8V/0-20A and 0-20V/0-10A. The lab power supply has USB Host, USB Device interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 200W. The lab power supplies are equipped with a clear display where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
€589.00 View Product -
Power Supply
RIGOL DP813A
Technical specifications:
– Excellent linear regulation and load regulation ratio
– Fast transient response time: <50us
– Standard OVP / OCP / OTP protection functions
– Standard timing output
– Integrated V, A, W measurements and waveform display
– Independent control for each channel
– 3.5 inch TFT displayDifferences between + A and Non-A models:
– Support for more advanced functions: timer and delay output (are standard for all models), while recorder / analyzer / monitor / trigger functions (are standard for “+ A” models and optional for other models)
– Support of various interfaces: USB Host & Device (standard for all models), USB-GPIB (optional for all models), LAN / RS232 / Digital IO (standard for “+ A” models and optional for other models)
– The + A and Non-A models also differ in the values of some specifications, refer to the values shown in the datasheet.
Datasheet€710.00 View Product -
Power Supply
RIGOL DP821
The Rigol DP821 is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€549.00 View Product -
Power Supply
RIGOL DP822
DC power supply with 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
DP822A/DP822: 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
Low ripple and noise:
DP832A/DP832/DP831A/DP831/DP822A/DP822/DP821A/DP821: <350uVrms/2mVpp
Excellent linear regulation rate and load regulation rate
Fast transient response time: <50μs
Some channels are isolated
Standard OVP/OCP/OTP protection functions
Standard timing output
Built-in V,A,W measurements and waveform display
Independent control for each channel
Support more advanced functions: timer and delay output(standard),
recorder/analyzer/monitor/trigger(standard for “+A” models and optional for other models)
5-inch TFT display
Various interfaces: USB Host&Device(standard), USB-GPIB (optional),
LAN/RS232/Digital IO(standard for “+A” models and optional for other models)
For DP822, the high-resolution setting, trigger, monitor, analyzer as well as the RS232 and LAN
communication functions are all optional functions.€599.00 View Product -
Power Supply
RIGOL DP822A
The Rigol DP822A has 2 channels, the first channel can supply a voltage of 0-20V and a current of 0-5A. The second channel can provide a voltage of 0-5V and a current of 0-16A. The lab power supply has USB Host/USB
Device, LAN, RS232 and Digital I/O interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 180W. The lab power supplies are equipped with a clear display
where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
Key Features & Specifications:
–Low Ripple Noise: <350uvrms / 2mvpp
–Fast Transient Response Time: < 50us
–Standard Timing Output
–Built in V / A / W Measurement and Waveform Display
–Output Analysis, Monitoring, Setting Preset and Other Functions
–Original 3.5-inch Tft Wide Screen Display
Datasheet€729.00 View Product -
Power Supply
Rigol DP831
The Rigol DP831 is a very high quality programmable laboratory power supply with three switchable outputs (+8 V/5 A, +30 V/2 A and -30 V/2 A) and a maximum power output of 160 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP831 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€419.00 View Product -
Power Supply
RIGOL DP932A
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/O€690.00 View Product -
Power Supply
RIGOL DP932E
The DP900 Series Power Supplies combine our new touch screen interface with new flexibility and higher speed functions designed for benchtop DC power analysis. The DP932A and DP932U are 3 channel completely isolated benchtop power supplies. Activate the high-speed arb function that allows you to update the power supply output at up to 10 times per second while quickly creating a repeating shape or pattern from the front panel. You can also combine channels 1 and 2 internally either in parallel or in series to expand the power envelope for your testing. No more cabling challenges since you can now get the current or voltage for both channels with one cable connection. The DP932A comes with all the capabilities enabled. The DP932U has optional resolution, digital IO, and arbitrary speed upgrades. The DP932U also comes with safety banana plugs in place of the binding posts on the DP932A. This combination of flexibility and capability makes the DP900 an important addition to any engineer’s bench.
€380.00€429.00View Product -
Power Supply
RIGOL DP932U
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/O€529.00 View Product